Search

Abstract: A micromechanical model consisting of a band with a square array of equally sized cells, with a spherical void located in each cell, is developed. The band is allowed a certain inclination and the periodic arrangement of the cells allow the study of a single unit cell for which fully periodic boundary conditions are applied. The model is based on the theoretical framework of plastic localization and is in essence the micromechanical model by Barsoum and Faleskog (Barsoum, I., Faleskog, J., 2007. Rupture mechanisms in combined tension and shear—micromechanics. International Journal of Solids and Structures 44(17), 5481–5498) with the extension accounting for the band orientation. The effect of band inclination is significant on the strain to localization and cannot be disregarded. The macroscopic stress state is characterized by the stress triaxiality and the Lode parameter. The model is used to investigate the influence of the stress state on void growth and coalescence. It is found that the Lode parameter exerts a strong influence on the void shape evolution and void growth rate as well as the localized deformation behavior. At high stress triaxiality level the influence of the Lode parameter is not as marked and the overall ductility is set by the stress triaxiality. For a dominating shear stress state localization into a band cannot be regarded as a void coalescence criterion predicting material failure. A coalescence criterion operative at dominating shear stress state is needed. [Copyright &y& Elsevier]

Abstract: A micromechanics model based on the theoretical framework of plastic localization into a band introduced by Rice is developed. The model consists of a planar band with a square array of equally sized cells, with a spherical void located in the centre of each cell. The periodic arrangement of the cells allows the study of a single unit cell for which fully periodic boundary conditions are applied. The micromechanics model is applied to analyze failure by ductile rupture in experiments on double notched tube specimens subjected to combined tension and torsion carried out by the present authors. The stress state is characterized in terms of the stress triaxiality and the Lode parameter. Two rupture mechanisms can be identified, void coalescence by internal necking at high triaxiality and void coalescence by internal shearing at low triaxiality. For the internal necking mechanism, failure is assumed to occur when the deformation localizes into a planar band and is closely associated with extensive void growth until impingement of voids. For the internal shearing mechanism, a simple criterion based on the attainment of a critical value of shear deformation is utilized. The two failure criteria capture the transition between the two rupture mechanisms successfully and are in good agreement with the experimental result. [Copyright &y& Elsevier]

Abstract: An experimental investigation of the rupture mechanisms in a mid-strength and a high-strength steel were conducted employing a novel test configuration. The specimen used was a double notched tube specimen loaded in combined tension and torsion at a fixed ratio. The effective plastic strain, the stress triaxiality and the Lode parameter were determined in the centre of the notch at failure. Scanning electron microscopy of the fractured surfaces revealed two distinctively different ductile rupture mechanisms depending on the stress state. At high stress triaxiality the fractured surfaces were covered with large and deep dimples, suggesting that growth and internal necking of voids being the governing rupture mechanism. At low triaxiality it was found that the fractured surfaces were covered with elongated small shear dimples, suggesting internal void shearing being the governing rupture mechanism. In the fractured surfaces of the high-strength steel, regions with quasi-cleavage were also observed. The transition from the internal necking mechanism to the internal shearing mechanism was accompanied by a significant drop in ductility. [Copyright &y& Elsevier]