Search

In waterway regulation engineering, submerged reefs are quite susceptible to the repetitive oblique strike from drop hammer and impact drilling, leading to a repetitive compression–shear impacting. Understanding the dynamic responses and failure mechanism of saturated rocks subjected to repetitive compression–shear impacting is thus of great significance for the efficient removal of submerged reefs. In this study, using the split Hopkinson pressure bar (SHPB) apparatus, the repetitive compression–shear impacting tests were conducted on the saturated and dry sandstone specimen from the harbor excavation project in Guoyuan Port (Chongqing, China). Our experimental results indicate that the increasing loading rate or shear component in the dynamic loading has a negative influence on the bearing capacity of saturated sandstone subjected to repetitive impacting. The deformability of saturated rocks increases as the impacting number or the shear component in the dynamic loading. The energy absorption ability as well as the energy utilization of the saturated rocks is highly improved by implementing repetitive compression–shear impacting, and such improvement yields an ascension limit with the increasing shear component in the dynamic loading. As the shear component introduces into the repetitive impacting loading, the failure patterns of rocks change from the relative tensile mode with a large deformation band along the loading direction to the combined compression–shear mode with two parallel large deformation bands inclined to the loading direction, the water content between the mineral grains promotes the shear failure in rock dynamic testing. These results can provide a better understanding of the dynamic responses and failure properties of saturated rocks subjected to repetitive compression–shear impacting. Highlights: Illustrated influences of repetitive compression–shear impacting on the bearing capacity and deformability of saturated and dry rocks. Investigated energy dissipation of saturated and dry rocks under repetitive combined compression–shear impacting. Revealed failure patterns of saturated and dry rocks under repetitive combined compression–shear impacting. [ABSTRACT FROM AUTHOR]

The complex response of underground geomaterials subjected to dynamic disturbance arises from the microstructure redistribution under high in- situ stress and the resulting fracture behaviors at multiaxial stress states. Inclined specimens were employed in an axially constrained split Hopkinson pressure bar (SHPB) system to achieve a combination of compression-shear stress states and static-dynamic loads. The loading rate under investigation ranged from 500 to 4,000 GPa/s, along with the axial prestress of 7, 21, 35, 49, and 63 MPa on specimens with an inclination of 0°, 3°, 5°, and 7°. The modified SHPB experimentation and discrete-element method modeling were implemented to unravel the combined effects of the loading rate, preload, and stress path on the failure mechanism of sandstone specimens involving the failure strength and envelope, fracturing pattern, fragmentation, and microcracking process. The positive rate dependence of the failure strength and Drucker–Prager envelope was observed. The preload showed double effects on the failure strength, indicated by an upper bound of the failure envelope as it expanded with the increasing preload. The microdamage accumulated during preloading and the global stress field collectively influenced the failure pattern of the inclined specimen, altering from a shear fracturing mode under dynamic loading or high-preload static-dynamic loading to an axial splitting mode near the specimen surface under low-preload static-dynamic loading. [ABSTRACT FROM AUTHOR]

Rocks in the deep underground are likely subjected to both hydrostatic confining pressure and dynamic compression–shear load. Thus, accurately characterizing the dynamic properties and failure mechanism of hydrostatically confined rocks under combined compression–shear impacting is crucial for the stability assessment of deep underground rock structures. In this study, on the basis of an improved split Hopkinson pressure bar (SHPB) apparatus, the combined dynamic compression–shear tests are performed on inclined cylindrical sandstone specimens with hydrostatic confining pressures. During the test, the dynamic force balance of rock specimens can be well satisfied using the pulse shaping technique. Our results show that the hydrostatic confining pressure and dynamic loading rate help strengthen the load-carrying capacity of rocks. In contrast, the shear component in the dynamic load limits the dynamic peak stress of rocks. As hydrostatic confining pressure increases, the failure surface based on the Drucker–Prager criterion gradually expands outward. Under dynamic loading, the compressive deformation modulus of rocks decreases with increasing shear component in the dynamic load, contrary to its response to hydrostatic confining pressure. Fragmentation analysis indicates that the hydrostatic confining pressure and the shear component of dynamic loading restrict the fracture behavior of rocks. Besides, as the specimen inclination angle and the hydrostatic confining pressure increase, the failure pattern of rock specimens changes from the tensile-dominated failure with a truncated conical surface to the shear-dominated failure with a single shear plane along its short diagonal. [ABSTRACT FROM AUTHOR]

Cracked rocks are quite susceptible to dynamic loading from drilling, blasting, and impacting events. Understanding the dynamic response of cracked rocks under dynamic loadings is crucial for the assessment of rock structure stability. In this study, dynamic compression tests were carried out on rock specimens with multiple parallel cracks using a split Hopkinson pressure bar apparatus. Effects of strain rate and crack intensity on dynamic responses, including strength and deformation properties, progressive failure behavior, rock fragmentation characteristics, and energy dissipation of cracked rock specimens, were systematically investigated. Stress–strain curves migrate from class I curves into class II with increasing strain rate. Dynamic strength shows clear rate dependence while dynamic elastic modulus is independent of strain rate. Progressive failure behavior of cracked rock specimens under high loading rates was analyzed using high-speed photography and digital image correlation technique. Results show that the X-shaped shear failure mode is the final failure modes of all specimens, regardless of crack intensity. Fragmentation analysis indicates that increasing strain rate intensifies fragmentation, decreases mean fragment size, and increases fractal dimension of rock fragments. At low strain rates, specimens remain unbroken or slightly spilt; at high strain rates, specimens are systematically pulverized. Energy utilization efficiency decreases while energy dissipation density increases with increasing strain rate. For a given strain rate, crack intensity has no significant influences on energy dissipation and fragmentation characteristics of cracked rock specimens under dynamic loading. [ABSTRACT FROM AUTHOR]

• Rate-dependent cracking behaviors of single-flawed rock specimen under dynamic loading are numerically observed via DEM simulation. • Tensile wing cracks dominate specimen failure under low strain rate, while anti-wing cracks and shear cracks are prevalent under high strain rate. • Different initiation locations of tensile wing cracks are explained by stress filed visualization and theoretical analysis. • The initiation angles of tensile wing cracks are predicted via GMTS criteria, and the length of FPZ increases with increasing strain rate. This paper numerically investigated the rate-dependent progressive cracking behaviours of single-flawed rock specimens in split Hopkinson pressure bar (SHPB) tests. First, a 3D numerical SHPB system is established based on the discrete element method (DEM). By comparing with our laboratory experiments, micro-parameters of the DEM model are calibrated, which guarantees the reliability of the numerical simulations results. Via slice-cutting view, the inner and surface progressive cracking processes are explicitly revealed and compared, which compensates some defects in laboratory tests. Our numerical simulation results show that the progressive cracking behaviours of the single-flawed rock specimens exhibit evident rate dependence. Under low strain rates, tensile wing cracks dominate the entire cracking process, and only a few shear cracks appear during the post-peak stage. In contrast, under high strain rates, tensile wing racks are significantly suppressed, while anti-wing cracks and shear cracks are fully developed, leading to the final X-shaped failure modes. In addition, progressive cracking behaviours of the single-flawed rock specimens with different flaw inclination angles are assessed. Via stress field visualization and theoretical analysis, the different initiation locations of tensile wing cracks are explained. Furthermore, based on the generalized maximal tangential stress (GMTS) criteria, the fracture initiation angles of tensile wing cracks are predicted. The results show that the fracture initiation angles and the fracture process zone (FPZ) are significantly affected by the strain rate. The length of FPZ under dynamic loads is evidently longer than that under static loads, and the length of FPZ generally increases with an increasing strain rate, exhibiting evident rate dependence. [ABSTRACT FROM AUTHOR]