Search

[Display omitted] • RHC-0.5 was prepared via a simple one-step hydrothermal route. • RHC-0.5 has high demulsification efficiency in water-in-crude oil. • The demulsification efficiency of RHC-0.5 is similar to commonly commercial demulsifiers. • RHC-0.5 is low-cost and environmentally-friendly and easily prepared. Demulsification of crude oil emulsions still face many difficulties in the petroleum industry. Therefore, it is very important to develop innovative materials to achieve the effective separation of oil–water emulsions. In this work, an environmentally friendly RHC-0.5 demulsifier was prepared via a simple one-step hydrothermal route using rice husk (RH) as raw materials. It was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, energy dispersive X-ray spectrometer and thermogravimetric analysis. The possible breaking mechanism was analyzed by particle size analysis, Zeta potential, interfacial activity, interfacial tension, self-assemble of interfacial film and microscopic analysis. The influence of some important factors such as dosage, temperature, standing time and salinity on the demulsifying efficiency (DP) was explored through bottle tests. The optimal DP of 95.01 % could be obtain with 300 mg/L of RHC-0.5 at 70 °C for 10 min. Meanwhile, RHC-0.5 had a good salt tolerance even at the salinity of 40000 mg /L. In addition, its DP was compared with that of commercial demulsifiers such as SP169, CH-66 and AR-32. This work not only can promote the efficient utilization of biological waste (RH), but also provides an insight into the exploration of new demulsifying materials with excellent performance. [ABSTRACT FROM AUTHOR]

In order to reduce the cost of demulsifiers and improve the demulsification performance of carbon material demulsifier, the nano-SiO 2 was grafted onto the surface of oxidized carbon black (Ox-CB) by sol-gel method in current study. The novel composite demulsifier was analyzed by fourier transform infrared spectroscopy (FT-IR), field-emission scanning electron microscope (FE-SEM), energy dispersive X-ray (EDX) and X-ray diffraction spectra (XRD) which confirmed the partial grafting of SiO 2 on the oxidized carbon black (Ox-CB).The influences of temperature, settling time, and concentration of the composite demulsifier on the efficiency for breaking up water-in-oil emulsions were investigated in detail by bottle test. It was found that the best operating conditions to remove more than 90% of the water from the original emulsion were a temperature of 75 ℃ and a demulsifier concentration of 500 mg/L. The wettability, oil-water interfacial tensions (IFT) and interfacial activity of the demulsifier were further measured to explore the demulsification mechanism. Possible demulsification mechanism showed that the composite demulsifier could lead to the breakup of water-in-oil emulsions by bridging, flocculation and coalescence. The high interfacial activity is the main factor affecting the demulsification. [ABSTRACT FROM AUTHOR]