Search

A comparison study on using air-cooled and water-cooled conventional and oil-free chillers in hospitals in Hong Kong is reported. The study commenced with a comprehensive literature review to reaffirm the effectiveness of recommended precaution measures for containing the risk of Legionnaires’ disease (LD) associated with using cooling towers. Numerical performance models for oil-free chillers established for use in the study are presented. Based on recorded cooling demands of two existing hospitals, the life-cycle energy consumption and cost of system options involving different combinations of heat rejection method and chiller type were evaluated, compared and discussed. The results show that water-cooled air-conditioning systems with conventional chillers and cooling towers are still more energy efficient than air-cooled systems with oil-free chillers. Water-cooled oil-free chillers may become an economically viable choice when their price is lowered in future. Pilot installation is recommendable, as it would allow the reliability and maintainability of the new oil-free chillers to be ascertained.Practical applications: Findings of the literature review reaffirmed the effectiveness of measures recommended in contemporary guidelines for LD prevention, which would ease the mind of owners, designers and operation and maintenance personnel in regard of using cooling towers in hospitals. The numerical models for oil-free chillers presented in the paper are useful for evaluation of the energy consumption of this new type of chiller and for comparison with other types of chillers. The study approach described in the paper, including the energy consumption prediction and life-cycle cost evaluation methods, provides a useful framework for similar studies. [ABSTRACT FROM PUBLISHER]

Abstract: Environmental sustainability is a topic of increasing concern among scholars, city planners, engineers and policymakers. Electricity consumption constitutes about two-thirds of a city''s carbon emissions. In high-density Hong Kong, the building sector accounts for 89% of total electricity consumption, with commercial buildings alone accounting for 67% of the total. This paper reports the results of an in-depth case study examining how Langham Place Hotel Mongkok Hong Kong (LPHKG) has successfully reduced its CO2 emissions by implementing a range of sustainability design strategies. LPHKG is a five-star hotel situated in Mongkok – one of the most densely populated districts in the world, with an estimated 130,000 people per square kilometre. In particular, the paper discusses how the hotel, in its efforts to achieve net zero-energy, has made wise use of technologies to maximise energy consumption efficiency in its existing lighting and air-conditioning systems and in the mechanical devices of the building itself. The overall implication of LPHKG''s efforts is that, although the initial investment required for such technologies is usually large, the resulting long-term cost savings can be significant. [Copyright &y& Elsevier]

Climate change may seriously affect the energy consumption of buildings by influencing their air conditioning loads, especially the ventilation loads which vary directly with the local weather conditions. Research on how the ventilation load responds to climate change is of great significance, especially in coastline subtropical regions like Hong Kong. This paper investigated the impacts of climate change on buildings' ventilation load and building energy use in Hong Kong with the hourly meteorological data from 1950 to 2007. Results have been well validated by the simulation of a typical local hotel building during this period. The results show that climate warming increases both sensible and latent parts of the cooling ventilation load. The latent part, which occupies ∼80% of the total ventilation load, increases at a higher rate, about twice of that of the sensible one. Furthermore, it is found that the urban heat island (UHI) effect causes a much higher growth rate of the ventilation load at night, which is about three times compared with that in the daytime. The latent part of the cooling ventilation load at night, which is found to be the most sensitive component to the climate change, plays a most significant role in the energy consumption increase. The possible measures were thus suggested to avoid negative changes of the ventilation load. Besides, reducing the UHI effect by better urban planning also significantly benefits the local buildings with a long air-conditioning operation time. [ABSTRACT FROM AUTHOR]

Abstract: The intermittent property of a photovoltaic (PV) system requires supplementary energy such as the utility grid or batteries to meet load demand. However, when large scale PV systems are connected to the utility grid, they might affect the grid stability if the overall system is not properly designed. Hence, an accurate model for forecasting the PV system output would be useful in enhancing the system stability and reliability. The dynamic modelling of PV systems is thus crucial to the rapidly developing technologies and integrated sources in the smart grid application. This paper presents different approaches to model PV systems and identifies their pros and cons in modelling. The paper then explains the importance of a dynamic model, followed by the methodology in building up such a dynamic model. A three-vertex representation of a nearby building casting a shadow onto the PV array is also proposed as a novel approach in shadow analysis. The implementation of the dynamic model for PV systems was demonstrated in a case study in Hong Kong. [Copyright &y& Elsevier]

Abstract: The construction of buildings has a very important impact on the environment, and the process of manufacturing and transporting of building materials, and installing and constructing of buildings consumes great energy and emits large quantity of greenhouse gas (GHG). The present paper defines four sources of GHG emissions in building construction, which are: manufacture and transportation of building materials; energy consumption of construction equipment; energy consumption for processing resources; and disposal of construction waste, and then establishes the calculation method of GHG emissions. This paper presents a case study of GHG emissions in building construction in Hong Kong. The results show that 82–87% of the total GHG emissions are from the embodied GHG emissions of building materials, 6–8% are from the transportation of building materials, and 6–9% are due to the energy consumption of construction equipment. The results also indicate that embodied GHG emissions of concrete and reinforced steel account for 94–95% of those of all building materials, and thus the use of recycled building materials, especially reinforced steel, would decrease the GHG emissions by a considerable amount. [Copyright &y& Elsevier]

Building occupants can enjoy a healthy and comfortable indoor environment and use less cooling energy if sufficient natural ventilation is available in their dwellings. Assessing the natural ventilation performance of building designs requires modelling of the external wind environment, the natural ventilation rate and the thermal environment in individual rooms, and reduction in the use of air-conditioning equipment. These are complicated processes. A practical approach for assessing the natural ventilation performance of residential building designs is presented in this paper. The method includes prediction of wind pressures upon window openings in the building façade by computational fluid dynamics simulation, natural ventilation rate prediction using a flow network simulation model, and indoor free-float temperature and air-conditioning energy-use predictions using a building heat transfer and an airconditioner performance simulation programme. Additionally, the method includes a simplified statistical approach to deal with the random variations in the speed and direction of the wind. This method has been applied to assess the natural ventilation performance of a standard public housing block design widely used in Hong Kong, taking into account when the wind wing walls were incorporated into the building façade and when the separation distances among the building blocks were widened by 25% and 50%. [ABSTRACT FROM AUTHOR]

Purpose ? The purpose of this paper is to address the issue of electrical energy consumption through case studies of a small sample of buildings on a university campus in Hong Kong. Design/methodology/approach ? Data were used to produce deterministic time-series models and so aid analysis of the climatic effects on energy consumption. Semi-structured interviews were employed to supplement the data. Both technical factors impacting on energy consumption and behavioural considerations are addressed. Findings ? Conclusions demonstrate the impact of functions housed in the buildings, their intensity of occupation, and that the increased consumption to combat high temperatures and relative humidity during the summer can be mitigated by improved control systems and increased awareness of users to induce less energy consuming behaviour. Research limitations/implications ? Limitations of the empirical study are due to the rather short run of data which were available for the case study buildings and the particular functions of the buildings studied. More detailed data of energy consumption is desirable. Complimentary studies should concern different building functional types and other locations, involving varying climatic conditions. Practical implications ? The findings demonstrate the value of time series models of, and the impacts of the main variables on energy consumption and so, should inform design decisions regarding life cycle costing of buildings and foster energy conservation. Originality/value ? This paper has provided empirical modelling of energy uses in the case study buildings and thereby demonstrated the impacts on energy uses of certain major variables to inform design for energy conservation. [ABSTRACT FROM AUTHOR]

The feasibility of using thermal performance lines to assess the efficiency of using energy in air-conditioned commercial buildings in Hong Kong is being explored. The paper describes a regression study aimed at identifying a suitable climatic variable that would yield linear thermal performance lines for commercial buildings in Hong Kong. The study was based on the monthly electricity consumption of 26 existing office/commercial buildings obtained from a recent survey. Candidate weather parameters considered include monthly mean outdoor temperature, outdoor air moisture content and global solar radiation, and their square and product terms. The regression analysis shows that the square of monthly mean outdoor temperature would be the most appropriate climatic variable. Explanations are also given as to why moisture content and global solar radiation were considered less appropriate, notwithstanding that in Hong Kong, the humidity is high for most of the time in the year and the cooling load due to solar heat gain is a significant component of the design cooling load of air-conditioned buildings. [ABSTRACT FROM AUTHOR]

In the Hong Kong Building Environmental Assessment Method (HK-BEAM) for air-conditioned office premises, energy use for air-conditioning constitutes one major item of assessment. The current assessment method for existing offices is based on computer simulation predictions. Following a recent review of the HK-BEAM scheme, simplified models have been developed for use in the assessment as an alternative to the detailed simulation method. These models are multiple linear regression models relating the annual electricity use for air-conditioning, and the maximum electricity demand, in an office building to the key characteristics of the building envelope and the air-conditioning system. Use of these models can reduce the effort required for data collection and input, and will allow the assessors to more quickly complete an assessment. In addition, additional parametric studies can be performed within much less time, which will help assessors in formulating advice to developers/designers on measures that will lead to improved energy performance and thus higher credits. This paper summarizes the review findings and describes the approach taken in the establishment of the regression models. Comparison of predictions by the detailed computer simulation method and the alternative method showed that the latter could provide estimates close enough to the simulation predictions for the purpose of assessing the credits to be awarded to a building for its energy performance. [ABSTRACT FROM AUTHOR]

Climate change has always been an enormous threat to our living environments. In Hong Kong, energy consumed in buildings is a significant contributor to greenhouse gas (GHG) emissions. It is estimated that energy use in residential and commercial buildings alone accounts for more than 60 per cent of GHG emitted citywide. Hence, the building sector presents a strong opportunity to make substantial progress in reducing Hong Kong's energy demand and carbon emissions. For the past few years, the HKSAR Government has been spearheading the promotion of green buildings in Hong Kong and has continuously strived to place their efforts on various initiatives to achieve higher energy efficiency and to promote low carbon living. The government provides continuous support and works together with the Hong Kong Green Building Council (HKGBC) and various stakeholders to improve the energy efficiency in the building industry through numerous initiatives. The contributions of government and the private sector are equally important in combating climate change. The government and HKGBC have conducted strategic schemes with clear objectives and achievable targets. A practical support programme, 'ACT-Shop', is therefore available to promote knowledge-based practice on energy saving. Professionals are invited to help investigate the data of each case, develop improvement options and verity the savings. This paper aims to further discuss the concerted effort of the government and the HKGBC in combating climate change. [ABSTRACT FROM AUTHOR]

Improving the energy performance of existing building refurbishment has been identified as one of the key measures to reduce greenhouse gases (GHGs) emissions and combat climate change. However, little has been done to uncover how human behaviours would affect the selection of refurbishment solutions selection. The problem is particularly obvious for high-rise residential buildings as they are owned and/or occupied by different peoples with idiosyncratic behaviour and preference. In this research, 46 potential methods commonly used for major sustainable building refurbishment in high-rise residential buildings located in cities with sub-tropical climate like Hong Kong were identified through literature review. These sustainable building refurbishment methods are classified under five groups namely energy user pattern, domestic, high-rise building, climate feature and other building characteristics. A questionnaire survey was conducted to examine the feasibility of the identified refurbishment methods based on the perception of owners and occupants. The results show that those methods classified under building services category such as lighting, appliance, ventilation and lift received greater support from owners and occupants. It is interesting to note that owners and occupants did not favour those sustainable refurbishment options which are related to the building envelop when it comes to major building refurbishment. As for the renewable energy refurbishment methods, their acceptability was moderate indicating that there is huge potential for being incorporated into the major building refurbishment. This paper should help improve our understanding on what factors contribute to the satisfaction of owners and occupants of high-rise residential building in a major sustainable refurbishment scheme. [ABSTRACT FROM AUTHOR]

Abstract: Currently one of the most promising power solutions for remote rural areas and isolated islands which are far away from utility grid is the stand-alone solar photovoltaic (PV) renewable energy system or hybrid solar–wind power system. This paper presents the investigation results of a real remote solar PV project on an island in Hong Kong. The stand-alone PV system, rated at 19.8kWp, is established on a remote island for power generation to local residents. Power on this island was originally supplied by diesel generators and this new solar energy system has significantly reduced fuel costs and alleviated environmental pollution. The on-site entire system’s operating data was collected for one whole year in 2011, and the energy performance of the PV array, inverters, battery bank and the entire PV system were analyzed in terms of daily energy balance, normalized performance parameters and overall system energy utilization ratio. The results from this long term system monitoring and its evaluation enables a detailed inspection of system operating performance with respect to the technical issues, which provides a useful reference for future applications of solar photovoltaics in remote islands. [Copyright &y& Elsevier]

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: Energy consumption by passenger transport in Hong Kong increased rapidly in the past decades and in 2008 it accounted for 19.7% of total energy use. Improving energy efficiency has been widely regarded as an effective way for reducing energy use in the transport sector. However, the expected energy savings from energy efficiency improvement are likely to be discounted due to the existence of rebound effect. This paper employs econometric models to estimate the direct rebound effect for private passenger transport in Hong Kong. We find that the magnitudes of the direct rebound effect are respectively 45% and 35% for 1993–2009 and 2002–2009, which indicates that there was a declining trend in the direct rebound effect for passenger transport over time. It also indicates that the direct rebound effect needs to be taken into consideration in assessing the impact of energy efficiency measures on reducing energy use in Hong Kong. [Copyright &y& Elsevier]

Abstract: In metropolitan cities like Hong Kong where land value is high, highrise commercial and residential buildings with “central core” design are developed. The lift lobbies in the buildings are usually located in the centre of the building to free up peripheral areas to provide valuable exterior view. The lift lobbies have no window provisions and electric lighting is switched on for 24h continuously consuming non-renewable energy. Different types of light guides/light pipes have been proven to be capable to transfer daylight into deep floor plan during both clear sky and overcast periods. However, the thickness of light guide requires 3m headroom clearance for installation whilst the headroom of the highrise buildings is usually limited to 2.8m in order to build more storeys. In this research, a remote source lighting system (RSL) is introduced to illuminate the enclosed lift lobbies. The system composed of prismatic light pipe and optic fiber to address the problem of limited headroom. Simulation of the system was carried out and reported in the paper, indicating that this lighting system can solve the energy consumption problem in the lift lobby in terms of renewable energy use and natural lighting application. This research concentrates on highrise residential buildings. [Copyright &y& Elsevier]

Abstract: The shading-type BIPV claddings can act as power generators as well as external shading devices and insulation panels. There is little available information about the impacts of orientations and inclinations on the combined energy effects of the shading-type BIPV claddings, including the power output of PV modules, the cooling load reduction of windows and concrete walls. It is worth studying the effects of different shading-type BIPV cladding designs on the total energy saving in order to maximize the system’s energy performance. By considering the meteorological conditions in Hong Kong, the energy effect of the shading-type BIPV claddings with different surface azimuth angles, in terms of electricity generation and cooling energy consumption reduction is analyzed in this paper. Based on the investigations, the optimum design of the shading-type BIPV claddings for different orientations can be achieved. [Copyright &y& Elsevier]

Abstract: Greening is a useful mitigation strategy for planners mainly from a visual perspective. For high-density urban living environment such as Hong Kong, urban greening helps cooling the air and providing shade; it also helps lowering building energy consumption by providing a better outdoor boundary condition. Many researchers have also suggested that greening may be employed as a strategy for combating the ill effects of urban Heat Island (UHI). Working towards a set of better greening guidelines for urban planners, the current paper first provides a comprehensive review of planning with urban greening. It then describes parametric studies that have been conducted to investigate the preferred location, amount, and types of vegetation for urban planning. The parametric studies employed the numerical model ENVI-met, verified using field measurements, to simulate 33 cases with different combinations of factors. For benefiting urban activities, ambient air temperatures at the pedestrian level are compared among different greening strategies and building heights. For a city such as Hong Kong, which has a high building-height-to-street-width (H/W) ratio, the present study reveals that roof greening is ineffective for human thermal comfort near the ground. Trees are also suggested to be more effective than grass surfaces in cooling pedestrian areas. The amount of tree planting needed to lower pedestrians level air temperature by around 1°C is approximately 33% of the urban area. The present study allows urban planners to identify more precisely the greening principles, amount and policies necessary for better urban living environment in high-density cities. [Copyright &y& Elsevier]

Abstract: The concern on climate change leads to growing demand for minimization of energy use. As building is one of the largest energy consuming sectors, it is essential to study the impact of climate change on building energy performance. In this regard, building energy simulation software is a useful tool. A set of appropriate typical weather files is one of the key factors towards successful building energy simulation. This paper reports the work of developing a set of weather data files for subtropical Hong Kong, taking into the effect of future climate change. Projected monthly mean climate changes from a selected General Circulation Model for three future periods under two emission scenarios were integrated into an existing typical meteorological year weather file by a morphing method. Through this work, six sets of future weather files for subtropical Hong Kong were produced. A typical office building and a residential flat were modeled using building simulation program EnergyPlus. Hourly building energy simulations were carried out. The simulated results indicate that there will be substantial increase in A/C energy consumption under the impact of future climate change, ranging from 2.6% to 14.3% and from 3.7% to 24% for office building and residential flat, respectively. [Copyright &y& Elsevier]

Abstract: It becomes popular to use computer simulation technique to evaluate the performance of energy utilizations in buildings. The hourly weather data as simulation input is a crucial factor for the successful energy system simulation, and obtaining an accurate set of weather data is necessary to represent the long-term typical weather conditions throughout a year. This paper introduces a stochastic approach, which is called the first order multivariate Markov chain model, to generate the annual weather data for better evaluating and sizing different energy systems. The process for generating the weather data time series from the multivariate Markov transition probability matrices is described using 15-years actual hourly weather data of Hong Kong. The ability of this new model for retaining the statistical properties of the generated weather data series is examined and compared with the current existing TMY and TRY data. The main statistical properties used for this purpose are mean value, standard deviation, maximum value, minimum value, frequency distribution probability and persistency probability of the weather data sequence. The comparison between the observed weather data and the synthetically generated ones shows that the statistical characteristics of the developed set of weather data are satisfactorily preserved and the developed set of weather data can predict and evaluate different energy systems more accurately. [Copyright &y& Elsevier]

Abstract: The shading-type building-integrated photovoltaic (BIPV) claddings can act as power generators as well as external shading devices of a building, which reduce the energy consumption of the building. However, there is little information about energy impacts of different tilt angles of the shading-type BIPV claddings. By considering the typical meteorological conditions of Hong Kong, the energy performance of the shading-type BIPV claddings, in terms of the electricity generation and the cooling load reduction, is analyzed in this paper. The optimum tilt angle of PV modules for maximum electricity generation is found to be 20° instead of local latitude. Combining electricity generation and cooling load reduction, it can be concluded that the optimum tilt angles for the first type of the shading-type BIPV claddings vary from 30° to 50°, while the optimum tilt angle for the second type is 0°. [Copyright &y& Elsevier]

Abstract: Hong Kong is located in a typical subtropical region. The buildings in Hong Kong are subjected to high cooling demands for their air-conditioning systems throughout most of the year, and their contribution toward the total energy consumption is about 40%. Therefore, energy efficiency in buildings is essential to reduce the global energy use and improve the local environmental sustainability. This paper provides an overall review of the building energy research and efforts in Hong Kong over the last decade. Various aspects and energy saving measures, including energy policy, energy audit, design, control, diagnosis, building performance evaluation and renewable energy systems, studied or used to enhance the energy efficiency in buildings are reviewed. A brief introduction of the Hong Kong Building Energy Codes (BEC) and Hong Kong Building Environmental Assessment Method (HK-BEAM) are also provided to present the efforts of the local government and community on energy efficiency in buildings. This review aims at providing building researchers and practitioners a better understanding of buildings energy saving opportunities and approaches in cities particularly in subtropical regions and taking further proper actions to promote buildings energy efficiency and conservation. [Copyright &y& Elsevier]

Abstract: A benchmark study of the energy efficiency of private office buildings in Hong Kong was conducted in 2002 because energy efficiency was declining. In the study, private office buildings were divided into five user groups. For each group, a multiple regression model was developed to find the relationship between Energy Use Intensities (EUIs) and other factors, such as operating hours, for normalization and benchmarking purposes. In this paper we make use of the regression results to study the energy efficiency of private office buildings by different grades. In Hong Kong, office buildings are divided into three grades (A, B, and C) based on the quality of the facility, which is reflected in rental values; a Grade A office building denotes expensive luxury. We found that the EUI of Grade A office buildings is the highest, consuming over 50% of the total energy used in office buildings. Recently, the annual EUI of office buildings has improved even though Grade A floor space is increasing. This may be due to the promotion of the energy efficiency program launched in the last decade. [Copyright &y& Elsevier]

Abstract: This paper reports the findings on the energy performance of “see-through” PV glazing as applied to a typical open-plan office environment of Hong Kong. An experimental system was first set up and the measurements were used to verify the theoretical models developed via the ESP-r simulation platform. The validated models were subsequently used to evaluate the annual variations in thermal loads and electricity generation for two PV glazing systems as compared to the common absorptive glazing provisions. The results indicate that the innovative natural-ventilated PV double-glazing technology could significantly cut down the air-conditioning power consumption by 28%, as compared to the conventional single absorptive glazing system. [Copyright &y& Elsevier]

Abstract: This paper reports the evaluations of energy efficiency, plume potential as well as plume control of a huge chiller plant using water-evaporative cooling towers for heat rejection for a super high-rising commercial office building in a subtropical region of Hong Kong. The evaluations were carried out in a dynamic Transient Simulation Program (TRNSYS)-based simulation platform using alternative control strategies including set-point control logics of the supply cooling water temperature and cooling tower fan modulation control methods as well as different number control means of cooling towers. The results show that different control strategies have significant effects on the energy efficiency of the chiller plant. The quantification of the energy efficiency demonstrates significant energy-saving potential by using advanced technologies for implementing optimal control strategies in this cooling system. The results also reveal that the plume may occur frequently in spring and summer seasons and occasionally in other months due to the odd subtropical weather conditions. Control strategies also have significant effects on the frequency of the plume occurrence. The effective energy efficiency control and effective plume control using wet–dry (i.e., hybrid) cooling towers are also discussed. [Copyright &y& Elsevier]

Abstract: Mandatory energy codes to curb energy use of residential buildings have been formally launched in China for more than two decades but little has been publicized in literature. Similar codes are not available for residential buildings in Hong Kong, but most residential buildings in Hong Kong, especially public housing estates, are HK-BEAM certified to demonstrate their compliance with regulatory and basic design requirements. Given HK-BEAM is internationally recognized and there are doubts about the effectiveness of the China codes, how the energy efficiency of the HK-BEAM certified buildings compare with buildings in compliance with the China codes is of interest to most building designers and policy makers. This paper describes how the energy efficiency of a case study building in compliance with the China codes compare with the one in compliance with HK-BEAM. The energy simulation by HTB2 and BECRES reveal that the case study building in compliance with the China codes is 51.1% better in energy use. In the study, the relative impact of each compliance criterion on energy use and cooling load has been quantified by sensitivity analysis. The sensitivity values indicate that energy use is most sensitive to air-conditioning operation hours, indoor design temperature, coefficient of performance (COP) of the room air-conditioners (RAC) units, and the envelop characteristics. The results of this study indicate that a HK-BEAM certified building cannot satisfy the China codes requirements. This provides good reference to the policy makers, the building owners, and to the China and Hong Kong Governments when considering reciprocal recognition of building energy codes. [Copyright &y& Elsevier]

This paper estimates the quantity of pollutants produced by the hotel industry through its electricity consumption. A survey of 17 hotels in Hong Kong was carried out to collect 3 years of energy consumption data. Regression analysis indicated that gross floor area was a major and statistically accepted factor in explaining the electricity consumption in hotels. It was found that the average electricity consumption was about 342 kW h/m2/year. Then, based on some established pollutant emission factors of coal and natural gas, the amount of sulphur dioxide, nitrogen dioxides, carbon dioxides and particulates created by the hotel industry''s electricity usage during a 10-year period from 1988 to 1997 was estimated. The study further predicts the increase in these amounts in 1998–2003 accompanying the rise in the number of hotel properties. The findings indicate that the existing green measures and devices are inadequate to cope with the increase in pollution emission in the near future. We believe that the hotel industry should adopt a more proactive approach to reduce electricity usage and propose the inclusion of environmental reporting in trade journals. [Copyright &y& Elsevier]

Herein we develop a means to differentiate between the energy required to expand and the energy required to maintain the economies of cities. A nonlinear model is tested against historical data for two cities, Hong Kong and Singapore. A robust fit is obtained for Hong Kong, with energy for maintenance close to that for growth, while Singapore, with a weaker fit, is growth dominated. The findings suggest that decreases in either of the per unit maintenance or growth demands can simultaneously cause gross domestic product (GDP) and total energy use to increase. Furthermore, increasing maintenance demands can significantly limit growth in energy demand and GDP. Thus, the low maintenance demands for Hong Kong, and especially Singapore, imply that, all other things being equal, GDP and energy use of these cities will continue to grow, though Singapore's higher energy use for growth means it will require more energy than Hong Kong. [ABSTRACT FROM AUTHOR]

Since the energy crisis in the 1970s, the government and policymakers have endeavoured to promote energy conservation policy on sustainable building designs and operations. Various benchmarks of building energy consumption were developed. Unfortunately, the complicated benchmarking models would impose difficulties in general adaptation. This study proposes a simple sustainability benchmark using a 5-star rating system for electricity and fuel gas consumption in residential buildings. With this system, the least sustainable households, i.e. the top 10% of the survey samples in consumption, would be awarded with the lowest sustainability rating of '1 star', while the most sustainable households (i.e. the bottom 10%) would be awarded with the highest rating of '5 stars'. This simple model would be useful for identifying the extreme cases of energy consumption and promoting the policy on sustainable building practices without inclusive measurements. Practical application: A simple sustainability benchmark model using a 5-star rating system for electricity and fuel gas consumption in residential buildings is proposed. This model would be useful for promoting the policy on sustainable building practices without inclusive measurements by identifying the extreme cases of consumption. [ABSTRACT FROM AUTHOR]

The lack of knowledge and motivation of the operation and maintenance (O&M) staff together with the available financial resources, are the key barriers to improving energy efficiency of buildings. A survey of O&M personnel has been conducted recently in Hong Kong to find out the energy consumption and the resource inputs to the operation and maintenance of services in commercial buildings. In turn, the current level of knowledge and skills of the O&M personnel was evaluated. Analysis of the collected data revealed that buildings with higher energy performance were associated with O&M personnel who were better paid. The income of the O&M personnel was associated with academic qualification and experience but a steady rate of rise could only be sustained by continued improvement. A feasible way to boost improvements in building energy performance would be to provide rewards that are linked to savings in energy costs. [ABSTRACT FROM AUTHOR]

Analyzes the fluctuations in oil consumption in Hong Kong between 1981 and 1997, covering use by the utility and non-utility sectors. Consumption of different oil products; Increase in demand for bunker fuel; Future of the Hong Kong oil market.