Search

Quasi‐two‐dimensional (quasi‐2D) organic–inorganic hybrid perovskites have shown excellent ambient stability with decent photovoltaic performance. Further improvement of device level properties requires a comprehensive understanding of the performance‐limiting mechanisms such as phase segregation, ion/electron coupling conduction, and their effects on charge transport at both the micro‐ and macro‐scale. Here, space resolved investigations of Ruddlesden–Popper (RP) phases of the commonquasi‐2D perovskite are probed using two complementary methods, conducting atomic force microscopy (c‐AFM) and Kelvin probe force microscopy (KPFM). Bias‐driven photocurrent mappings obtained by c‐AFM measurements disclose local inhomogeneous conduction and hysteresis currents in quasi‐2D RP perovskites, while relatively uniform conductivity is observed on individual grains. Bias‐driven KPFM reveals that the surface average photovoltage sign is dominated by the band bending at the buried perovskite–substrate interface. The quasi‐2D RP film exhibits substantial variations in the spatial response of the photovoltage across grains and grain boundaries, which is direct evidence of the inherently benign nature of microstructures, and the final device performance. This research elucidates underlying space‐resolved photoresponse mechanisms behind the lower efficiency of quasi‐2D RP perovskites compared with the 3D perovskites, which is necessary for further development of efficient and stable 2D perovskite‐based devices. [ABSTRACT FROM AUTHOR]

All-inorganic halide perovskites (AIHPs) have become one of the most promising materials for commercial perovskite photovoltaics owing to their enhanced efficiency and thermodynamic stability. Output instability, such as current hysteresis, is stressed in organic-inorganic hybrid perovskite photovoltaics but is neglected in AIHP solar cells. Here, the origin and suppression of current hysteresis in AIHP solar cells are addressed from a microscopic viewpoint. The incorporation of fullerene into AIHP films efficiently suppresses ion migration, which alleviates the macroscopic current hysteresis in solar cells. This result is confirmed by both Kelvin probe force microscopy and conductive atomic force microscopy measurements. Our results provide an advanced understanding of the microscopic properties of AIHPs but also clearly clarify how to suppress the macroscopic current hysteresis, which further inspires the optimization of solar cells up to the levels of organic–inorganic hybrid counterparts. [ABSTRACT FROM AUTHOR]

Efficient electron transport layer–free perovskite solar cells (ETL‐free PSCs) with cost‐effective and simplified design can greatly promote the large area flexible application of PSCs. However, the absence of ETL usually leads to the mismatched indium tin oxide (ITO)/perovskite interface energy levels, which limits charge transfer and collection, and results in severe energy loss and poor device performance. To address this, a polar nonconjugated small‐molecule modifier is introduced to lower the work function of ITO and optimize interface energy level alignment by virtue of an inherent dipole, as verified by photoemission spectroscopy and Kelvin probe force microscopy measurements. The resultant barrier‐free ITO/perovskite contact favors efficient charge transfer and suppresses nonradiative recombination, endowing the device with enhanced open circuit voltage, short circuit current density, and fill factor, simultaneously. Accordingly, power conversion efficiency increases greatly from 12.81% to a record breaking 20.55%, comparable to state‐of‐the‐art PSCs with a sophisticated ETL. Also, the stability is enhanced with decreased hysteresis effect due to interface defect passivation and inhibited interface charge accumulation. This work facilitates the further development of highly efficient, flexible, and recyclable ETL‐free PSCs with simplified design and low cost by interface electronic structure engineering through facile electrode modification. [ABSTRACT FROM AUTHOR]