Search

A normally-off SiC-JFET/GaN-HEMT cascode device is recently proposed, featuring a cascode configuration that incorporates a high-voltage (HV, e.g., 1200 V) silicon-carbide (SiC) junction field effect transistor (JFET) delivering the HV blocking capability and a low-voltage (LV) enhanced-mode (E-mode) gallium-nitride (GaN) high electron mobility transistor (HEMT) providing the normally-off gate control. This all-wide-bandgap device exhibits superior thermal stability and high switching speed compared to its counterparts, e.g., the SiC/Si cascode device. In this article, we study short-circuit (SC) characteristics of a 1200-V/80-mΩ SiC/GaN cascode device by considering the interactions between the SiC and GaN devices. The single-event SC withstand time (SCWT) of the demonstrated SiC/GaN cascode device is tested to be ∼3 μs under a dc-bus voltage (Vdc) of 600 V when the turn-on gate voltage (VG-on) is set to 5 V. The SC failure occurs due to the formation of hot spots induced by thermal-runaway leakage currents inside the SiC JFET. The SCWT of the cascode device could be improved by applying a moderate VG-on (e.g., SCWT = ∼6.5 μs at VG-on = 3.5 V under v dc = 600 V) without affecting the on-state resistance (r on). However, it is identified that current oscillations tend to be triggered during the SC period when VG-on is too low (e.g., lower than 3 V). The oscillation behavior is attributed to the energy stored in the interconnection parts between the SiC and GaN devices. The harmful oscillations could be suppressed by applying higher VG-on, which drives the SiC JFET into low-transconductance mode by modulating the drain-to-source voltage (VDS-G) of the LV GaN HEMT. [ABSTRACT FROM AUTHOR]

A 650-V/84-mΩ normally-off GaN/SiC cascode device is demonstrated with systematic static and dynamic characterizations. The cascode device features a low-voltage enhancement-mode (E-mode) gallium nitride (GaN) high electron mobility transistor (HEMT) to enable normally-off gate control, and a 650-V normally-on silicon carbide (SiC) JFET provides the high-voltage blocking capability. The GaN/SiC cascode device exhibits many application-desired behaviors, including reverse conduction capability, avalanche breakdown capability, thermally stable threshold voltage, low input/output capacitances, no dynamic RON degradation, and negligible dynamic VTH shift. In addition, a customized double-pulse test board is built to evaluate the switching performance of this cascode device and other 650-V SiC-based power devices. This cascode device adopting low-voltage GaN HEMT has low QG×RON and exhibits excellent switching performance. The switching losses (EON and EOFF) are much smaller than that of the 650-V Si/SiC cascode device and comparable to that of the state-of-the-art 650-V SiC MOSFETs. [ABSTRACT FROM AUTHOR]

A normally-off SiC-JFET/GaN-HEMT cascode device is recently proposed, featuring a cascode configuration that incorporates a high-voltage (i.e., 1200 V) SiC junction field effect transistor (JFET) and a low-voltage GaN high electron mobility transistor (HEMT). This cascode device exhibits superior thermal stability and switching performance compared to the SiC MOSFETs, but also inevitably presents challenge in dv/dt-control as the input gate does not directly control the high-voltage JFET. Since dv/dt-control is of great importance to the management and suppression of electromagnetic interference in power electronics systems, methods of controlling the dv/dt rates of SiC/GaN cascode devices need to be developed. In this article, we conduct systematic investigation on different dv/dt control schemes with theoretical analysis and experimental evaluation. A dv/dt-control method based on diode-clamped external JFET gate resistor is proposed and evaluated by comparing it with other more conventional methods. The proposed dv/dt-control method is verified to provide a balanced dv/dt-control on the device turn-on and turn-off. [ABSTRACT FROM AUTHOR]

The drain induced dynamic threshold voltage (${V}_{\textrm {th}}$) shift of a ${p}$ -GaN gate HEMT with a Schottky gate contact is investigated, and the underlying mechanisms are explained with a charge storage model. When the device experiences a high drain bias ${V}_{\textrm {DSQ}}$ , the gate-to-drain capacitance (${C}_{\textrm {GD}}$) is charged to ${Q}_{\textrm {GD}}$ (${V}_{\textrm {DSQ}}$). As the drain voltage drops to ${V}_{\textrm {DSM}}$ where ${V}_{\textrm {th}}$ is measured, ${C}_{\textrm {GD}}$ is expected to be discharged to ${Q}_{\textrm {GD}}$ (${V}_{\textrm {DSM}}$). However, the metal/ ${p}$ -GaN Schottky junction could block the discharging current, resulting in storage of negative charges in the ${p}$ -GaN layer. For the device to turn on, additional gate voltage is required to counteract the stored negative charges, resulting in a positive shift of ${V}_{\textrm {th}}$. The dynamic ${V}_{\textrm {th}}$ shift is an intrinsic and predictable characteristic of the ${p}$ -GaN gate HEMT which is linearly correlated with $\Delta \!{Q}_{\textrm {GD}}={Q}_{\textrm {GD}}$ (${V}_{\textrm {DSQ}}$) $- {Q}_{\textrm {GD}}$ (${V}_{\textrm {DSM}}$). The ${V}_{\textrm {th}}$ shift is dependent on ${V}_{\textrm {DSQ}}$ as well as ${V}_{\textrm {DSM}}$ , indicating that the ${V}_{\textrm {th}}$ shift is varying along the load line during a switching operation. [ABSTRACT FROM AUTHOR]