Search

This paper describes the synthesis of ZnO/MWCNT nanocomposite, and their potential application in photoelectrochemical (PEC) water splitting for hydrogen generation and photocatalytic degradation of methylene blue dye. For the synthesis of nanocomposite, ZnO nanoparticles were grown on the MWCNT surface by a simple chemical route. Microscopic studies showed that ZnO nanoparticles were well dispersed on the MWCNT surface and Raman study confirmed the intimate integration between ZnO and MWCNT. The nanocomposite exhibit higher photocatalytic degradation of methylene blue dye as compared to bare ZnO. The ZnO/MWCNT photoanode shows ∼5 times increase in photocurrent density in comparison to pure ZnO, at an applied potential of +1 V vs. Ag/AgCl. The enhanced photocurrent density of ZnO/MWCNT photoanode is attributed to the decrease in band-bending and effective interfacial electron transfer due to the conducting CNT scaffold, which facilitates the charge collection and charge transport in the ZnO/MWCNT nanocomposite. The Electrochemical impedance spectroscopy measurements confirmed the faster charge transfer at the interface in the case of nanocomposite. These results suggest substantial potential of ZnO/MWCNT nanocomposite in dye degradation and PEC water splitting applications. [ABSTRACT FROM AUTHOR]

A ternary Ag/TiO 2 /CNT photoanode was prepared by grafting Ag nanoparticles on the surface of as-synthesized TiO 2 /CNT nanocomposite for the photoelectrochemical (PEC) water splitting under visible light irradiance. The ternary composite photoanode was observed to generate four times higher photocurrent density compared to binary TiO 2 /CNT nanocomposite under visible light irradiance. The Ag nanoparticles on the surface of nanocomposite act as a surface plasmon resonance (SPR) photosensitizer under visible light. The enhanced photocurrent density of Ag/TiO 2 /CNT ternary photoanode is attributed to the increased light absorption in the visible region, decrease in band-bending and effective interfacial electron transfer due to the synergetic effect of Ag nanoparticles and CNTs. The enhanced charge transfer within the Ag/TiO 2 /CNT was also confirmed by the electrochemical impedance spectroscopy. This work demonstrates a feasible route to improve the PEC performance of TiO 2 towards water splitting under sunlight irradiation. [ABSTRACT FROM AUTHOR]

Very high surface area, self-assembled, highly crystalline mesoporous SrTiO3 (STO) thin films were developed for photoelectrochemical water splitting. Much improved performance of these mesoporous films compared to planar STO thin films and any other form of STO such as single crystal samples and nanostructures was demonstrated. The high performance resulted from very large surface area films and optimization of carrier concentration. [ABSTRACT FROM AUTHOR]