Search

The effect of gamma-radiation on the spectral characteristics of FBGs has been studied experimentally. The FBGs were fabricated in optical fibers with a GeO2 concentration in the core in a range from several to 99 mol.%. Various pre- and post-fabrication treatments were applied with the aim to improve the radiation tolerance of the FBGs. The best result was obtained for a Type ha annealed grating written in SM310 fiber, where the Bragg peak shift saturated at a 12 pm level and an amplitude change of 0.04 dB with the maximal dose of about 50 kGy. [ABSTRACT FROM AUTHOR]

We characterized the responses of three erbium-doped fibers with slightly different concentrations of rare-earth ions (240-290 ppm) and Al2O3 (7-10 wt.%) during proton and γ-ray exposures. We have simultaneously measured the radiation-induced attenuation (RIA) around the Er3+ ion pumping wavelength (980 nm) and the associated changes of the Er3+ emission around 1530 nm. The three erbium-doped fibers show similar radiation responses. All fibers exhibit RIA levels between 9 × 10-3 and 1.7 × 10-2 dB m-1 Gy-1 at 980 nm and between 4 × 10-3 and 1.1 × 10-2 dB m-1 Gy-1 at 1530 nm. Protons and -y-rays lead to similar radiation damages, with small differences between the protons of different energies (50 MeV and 105 MeV). Furthermore, we have performed online measurements of the spectral dependence of RIA from 600 to 1600 nm and offline measurements from 1200 to 2400 nm. The three fibers exhibit the same spectral response. Losses decrease monotonically from the visible to the infrared part of the spectrum. We have performed spectral decomposition of these RIA curves with the help of absorption bands previously associated with radiation-induced point defects. Our analysis shows that the main part of the RIA (600-1700 nm) in erbium-doped glass can be explained by the generation of Al-related point defects. The other defects related to the germanium and phosphorus doping of the silica seem to have a lower contribution to the induced losses. The Er3+ ion properties seem to be mainly unaffected by proton exposure, suggesting a solvation shell around the Er3+ ion formed by Al2O3 species. [ABSTRACT FROM AUTHOR]

Future maintenance tasks of the International Experimental Thermonuclear fusion Reactor (ITER) will require communication links between the remotely operated equipment in the reactor vessel and the control room, that are radiation tolerant up to MGy dose levels. We therefore assessed the DC behaviour of a COTS SiGe heterojunction bipolar transistor (HBT) under gamma radiation up to more than 4 MGy. The DC current gain (β) presents a limited loss of about 30% for a base current of 100 μA. Our in-situ measurements allowed us to adapt the manufacturer's SPICE model and account for these radiation effects. Circuit-hardened driving electronics for both photonic transmitters and receivers can hence be designed. [ABSTRACT FROM AUTHOR]

We have investigated the variation of the optical absorption induced by pulsed (dose rate > 108 rad/s) and continuous (<50 rad/s) γ-ray exposures in pure-silica-core optical fibers. Tested multimode waveguides, designed with well-defined concentrations of hydroxyl groups and chlorine impurity, are possible candidates for integration in the plasma diagnostics of LMJ and ITER facilities. We evaluated their radiation-tolerance to low dose levels (<5 × 104 rad) in the visible and near-infrared parts of the spectrum. We measure the time dependent changes (10-9–10-1 s) of the radiation-induced attenuation (RIA) at fixed wavelengths and we complete these measurements with a spectral (450–1100 nm) analysis of these losses in the time range from 10-2 to 10³ s. We compared the responses obtained under transient exposures with measurements done at same dose levels (5 × 10³ rad) with lower dose rate (<10² rad/s). We showed that the radiation-induced changes are strongly dose rate dependent for this kind of optical fibers. Depending on the hydroxyl group concentration in the silica-glass, different point defects are shown to alter the fiber transmission after both irradiation types. The self-trapped holes play a particular role in the transient responses of optical fibers whereas non-bridging oxygen hole centers are mainly responsible for γ-ray radiation-induced losses. The consequences of these different behaviors for the integration of optical fibers in the LMJ are discussed. [ABSTRACT FROM AUTHOR]

Raman Distributed Temperature Sensors (RDTS) are attractive for the monitoring of large structures in nuclear power plants such as containment structures and coolant loop systems. We demonstrate the high radiation tolerance of a Raman distributed fiber optic temperature sensor, up to total gamma doses in excess of 300 kGy, using a double-ended configuration and commercially-available optical fibers. [ABSTRACT FROM AUTHOR]

The radiation behavior of a commercially available Er-doped fiber is evaluated under varying gamma dose rates with in-situ spectral loss measurements. Complementary post-irradiation photoluminescence measurements allow us to better under- stand the radiation effects. Our results suggest that the microscopic enviromnent of the Er3+ ions is not much affected by the gamma irradiation, unlike the host matrix. We discuss the impact for potential applications of these commercially available fibers in radiation environments. [ABSTRACT FROM AUTHOR]

We have investigated the effects of ionizing radiation-induced changes on dispersion and refractive index in photonic crystal fibre, boron co-doped photosensitive fibre and standard SMF-28 fibre up to a level of 7 MGy of 60Co γ-radiation. We have been unable to observe any changes within an experimental error of ~1% for the dispersion value and <1.5 × 10-3 for the refractive index. [ABSTRACT FROM AUTHOR]

We evaluated the performances of the hydrogen-loading technique to reduce the radiation-induced absorption in optical fibers in the visible part of the spectrum. A reduction factor as large as one order of magnitude can be obtained in high dose-rate regime. Based on a spectral deconvolution method, we showed that hydrogen preferentially interacts with NBOHC defects while the number of POR defects is not affected. [ABSTRACT FROM AUTHOR]

Abstract: Diagnostic components and heating and current drive systems will be used within the vacuum vessel of the future fusion reactors, and especially in ITER. They will have to withstand harsh conditions in terms of neutron and gamma radiations, temperatures, applied voltages and vacuum. In order to study the degradation phenomena of the insulation and window materials and to qualify prototype systems, a representative environment must be available to perform reliable evaluation tests. A multi-purpose irradiation facility has been therefore designed to fit the BR2 experimental fission reactor in Mol, Belgium. This reloadable facility allows a full control of the irradiation conditions (up to 1014ncm−2 s−1 and 500°C) in a vacuum or inert atmosphere, with in-situ bias and measurement capabilities. [Copyright &y& Elsevier]

Abstract: Several single mode silica-based fibers with different levels of erbium concentrations have been tested under 60Co gamma radiation. Irradiation has been performed at a dose-rate of ∼30Gy/h to a total dose of ∼2kGy. Transmission spectra were measured in situ in a spectral range from 1250 to 1630nm. The measurements show no detectable change in the Er-ions luminescence and absorption spectrum profiles, while a significant (∼dB/m/kGy at 1530nm) increase in transmission losses is attributed to the silica host matrix modifications. This conclusion is drawn based on the post-irradiation photo-luminescence analyzes realized with a confocal micro-spectrometer (514.5nm excitation, P ∼2mW). [Copyright &y& Elsevier]

Abstract: We studied the efficiency of a hydrogen-treatment in different pure silica core fibres irradiated by γ-ray in an attempt to decrease the radiation-induced absorption (RIA). It is observed that the effect of hydrogen already reduces the drawing-induced band commonly observed in low-OH fibres. During irradiation we observe a large increase of the radiation-induced OH growth with a corresponding significant reduction of the radiation-induced absorption at 0.63μm. The presence of hydrogen also reduces the transient radiation-induced absorption at 0.7μm sometimes observed in low-OH/low-chlorine fibres and believed to pertain to self-trapped holes (STHs). [Copyright &y& Elsevier]

Abstract: We propose a kinetic approach to the decomposition of the radiation-induced absorption spectra into individual Gaussian absorption bands. It is based on the correlated analysis of a series of induced absorption spectra obtained in the course of multi-step irradiation and during room temperature long-term post-radiation annealing. The methodology is demonstrated using data on Co60 gamma irradiated samples of commercial boro-silicate glass N-BK7 from SCHOTT. We show that physically meaningful spectroscopic parameters of absorption bands can be obtained without a priori knowledge of the band peak position and bandwidth. [Copyright &y& Elsevier]

Abstract: Radiation hardness assurance for ITER is based on extensive radiation testing. To be representative, these tests must involve an in situ follow-up of the radiation induced changes. SCK·CEN—the Belgian Nuclear Research Center is operating different irradiation facilities with broad possibilities of environmental control and on-line instrumentation. We describe those facilities and outline several recently completed and on-going experiments to illustrate capabilities for testing under conditions relevant for ITER. [Copyright &y& Elsevier]

The future International Thermonuclear Experimental Reactor (ITER) requires remote handling tools for its maintenance that will operate in a harsh environment. The numerous instrumentation cables for this maintenance equipment call for (de)multiplexing solutions, in order to reduce the umbilical size. Fibre-optic data links, using commercial-off-the-shelf (COTS) components, are seriously considered as a radiation tolerant solution, offering wavelength encoded multiplexing possibilities. However, an adapted modus operandi for a reliable assessment of this evolving technology is needed, to enable their long-term implementation in a radiation environment. In this paper, we present a methodology towards qualification methods for these instrumentation data links, and illustrate it with results obtained for different individual components. These results should enable the future design of robust architectures for communication links. [Copyright &y& Elsevier]