Search

Exploring efficient luminophores in the electrochemiluminescence (ECL) system is highly desired to pursue a sensitive ECL sensing platform. Herein, the black phosphorus nanosheets (BP NSs) with excellent ECL properties are investigated and serve as the luminophore with the coreactant of peroxydisulfate (S 2 O 8 ) solution. Moreover, owing to the overlapping of emission and absorbance spectra, effective resonance energy transfer (RET) is realized between the BP NSs and the introduced Au nanoparticles. In order to achieve the portable and miniaturized developing trends for the paper-based ECL sensing platform, a paper-based perovskite solar cell (PSC) device is designed to act as the power source to replace the commonly utilized expensive and cumbersome electrochemical workstation. Benefiting from that, a PSC driven paper-based constant potential ECL-RET sensing platform is constructed, thereby realizing sensitive microRNAs (miRNAs) detection. What's more, to attain the preferable analytical performance, the duplex-specific nuclease (DSN) is also introduced to assist the target recycling signal amplification strategy. Based on this, highly sensitive detection of miRNA-107 with a range from 0.1 pM to 15 nM is achieved by this designed sensing platform. Most importantly, this work not only pioneers a precedent for developing a high-sensitivity PSC triggered ECL sensing platform but also explores the application prospect of BP nanomaterial in the field of bioanalysis.2- ) solution. Moreover, owing to the overlapping of emission and absorbance spectra, effective resonance energy transfer (RET) is realized between the BP NSs and the introduced Au nanoparticles. In order to achieve the portable and miniaturized developing trends for the paper-based ECL sensing platform, a paper-based perovskite solar cell (PSC) device is designed to act as the power source to replace the commonly utilized expensive and cumbersome electrochemical workstation. Benefiting from that, a PSC driven paper-based constant potential ECL-RET sensing platform is constructed, thereby realizing sensitive microRNAs (miRNAs) detection. What's more, to attain the preferable analytical performance, the duplex-specific nuclease (DSN) is also introduced to assist the target recycling signal amplification strategy. Based on this, highly sensitive detection of miRNA-107 with a range from 0.1 pM to 15 nM is achieved by this designed sensing platform. Most importantly, this work not only pioneers a precedent for developing a high-sensitivity PSC triggered ECL sensing platform but also explores the application prospect of BP nanomaterial in the field of bioanalysis.

A merged system incorporating paperfluidics and papertronics has recently emerged as a simple, single-use, low-cost paradigm for disposable point-of-care (POC) diagnostic applications. Stand-alone and self-sustained paper-based systems are essential to providing effective and lifesaving treatments in resource-constrained environments. Therefore, a realistic and accessible power source is required for actual paper-based POC systems as their diagnostic performance and portability rely significantly on power availability. Among many paper-based batteries and energy storage devices, paper-based microbial fuel cells have attracted much attention because bacteria can harvest electricity from any type of organic matter that is readily available in those challenging regions. However, the promise of this technology has not been translated into practical power applications because of its short power duration, which is not enough to fully operate those systems for a relatively long period. In this work, we for the first time demonstrate a simple and long-lasting paper-based biological solar cell that uses photosynthetic bacteria as biocatalysts. The bacterial photosynthesis and respiration continuously and self-sustainably generate power by converting light energy into electricity. With a highly porous and conductive anode and an innovative solid-state cathode, the biological solar cell built upon the paper substrates generated the maximum current and power density of 65 µA/cm 2 and 10.7 µW/cm 2 , respectively, which are considerably greater than those of conventional micro-sized biological solar cells. Furthermore, photosynthetic bacteria in a 3-D volumetric chamber made of a stack of papers provided stable and long-lasting electricity for more than 5 h, while electrical current from the heterotrophic culture on 2-D paper dramatically decreased within several minutes.

Reusing polluted water through various decontamination techniques has appeared as one of the most practical approaches to address the global shortage of clean water. Rather than relying on single decontamination mechanism, herein we report the preparation and utilization of paper-based composites for multifunctional solar-driven clean water generation that is inspired by the multiple water purification approaches in biological systems. The reduced graphene oxide (rGO) sheets within such composites can efficiently remove organic contaminants through physical adsorption mechanism. Under solar irradiation, the floating rGO composites can instantly generate localized heating, which not only can directly generate clean water through distillation mechanism but also significantly enhance adsorption removal performance with the assistance of upward vapor flow. Such porous-structured paper-based composites allow for facile incorporation of photocatalysts to regenerate clean water out of contaminated water with combined adsorption, photodegradation, and interfacial heat-assisted distillation mechanisms. Within a homemade all-in-one water treatment device, the practical applicability of the composites for multifunctional clean water generation has been demonstrated.

Photovoltaic systems (PV) have been extensively used worldwide as a reliable and effective renewable energy resource due to their environmental and economic merits. However, PV systems are prone to several environmental and weather conditions that impact their performance. Amongst these conditions is dust accumulation, which has a significant adversative impact on the solar cells’ performance, especially in hot and arid regions. This study provides a comprehensive review of 278 articles focused on the impact of dust on PV panels’ performance along with other associated environmental factors, such as temperature, humidity, and wind speed. The review highlights the importance of modelling dust accumulation along with other ecological factors due to their interactive nature, and the differences between cleaning techniques and schedules effectiveness. Moreover, the study provides a review of statistical and artificial intelligence models used to predict PV performance and its prediction accuracies in terms of data size and complexity. Finally, the study draws attention to several research gaps that warrant further investigation. Among these gaps is the need for proper dynamic optimisation models for cleaning schedules and a more advanced machine and deep learning models to predict dust accumulation while considering environmental and ageing factors.

Various phases of solar energy were evaluated for possible medical application, using the Bi-Digital O-Ring Test. A 2-4 minute interval of highly beneficial phase during sunrise and sunset which is comparable or is stronger than (+) Qigong Energy was detected. This energy was stored on 3 x 5 inch index cards. The sun energy stored on the exposed surface had a Bi-Digital O-Ring Test extremely strong positive (+) response, and the opposite side of the index card which was not exposed to the sun showed an equally strong negative (-) response. When the Bi-Digital O-Ring Test strong positive side (+) was applied to the patient's skin above various intractable painful areas with circulatory disturbances, including gangrenous pain, muscle pain, joint pain, & migraine headache, most of the pain disappeared or was significantly reduced within between 10 seconds and 5 minutes, with accelerated wound healing compared with Qigong energy stored paper of the same exposure, which caused pain to disappear within between 1.5 minutes and 15 minutes. When this Special Solar Energy Stored Paper was applied either directly to the skin above cancer positive areas or the midline of the upper chest above the thymus gland representation area, or the occipital area above the medulla oblongata, various cancer related parameters returned to close to normal values, with immediate clinical improvement. The beneficial effects of 10-60 seconds of application of the Special Solar Energy Stored Paper lasted for between 7 and 40 days, depending on the individual and their environmental electromagnetic field, how the special solar energy was stored, and how it was applied to the patient.

A worldwide evaluation of the present status of renewable-energy generation, with a focus on photo-voltaic (PV) solar energy for the production of electricity. The most pertinent elements of the development and experiences of nations working to build and use these technologies are covered in this article. It also cites studies that highlight the efforts made by nations to reduce their emissions of green-house gas or to enhance the quality and accessibility of electric energy generation in light of their unique geographic and environmental circumstances. These studies focus in particular on remote communities that have limited access to the national power grid due to technological or financial constraints. This paper focusses on renewable-energy might serve as a starting point for assessing how clean energy affects the world's energy supply and demand, they are becoming an increasingly popular option in terms of cost and efficiency, which can attract new investors. By analysing recent data, case studies, and literature, this review aims to provide stakeholders with insights into the achievements and hurdles of solar energy, fostering informed decisions towards a sustainable and resilient energy future.

The increasing demand for world paper consumption stimulates the growth of paper and pulp industries and lead to high carbon emission. Electricity and thermal energy are critically demanded by the paper and pulp industries. The premises utilizing grid electricity are carbon intensive as the grid energy mainly generates electricity from burning coal. Alternative energy resources that are less carbon-intensive such as natural gas and solar energy, can be used to generate electricity to fulfil the energy demand of the pulp and paper industry and mitigate carbon emissions. This study implemented cogeneration natural gas boilers and solar energy to substitute the dependency on grid electricity from Tenaga National Berhad as they are less carbon intensive than coal fuel. Carbon and economic analysis were conducted on the case studies that replaced grid electricity supply from TNB by implementing cogeneration natural gas boilers and solar energy. The results show that the total savings/kWh of energy produced from cogeneration natural gas boiler range from 0.155 MYR/kWh to 0.164 MYR/kWh. The total savings per kWh of energy produced from solar energy is higher, which was 0.207 MYR/kWh of solar energy produced. Solar has better operation cost savings per unit of electricity generated, but a limited installation area restricts the implementation. In the future, the increasing efficiency of solar technology will make the option viable while achieving more cost savings and carbon emission reduction. [ABSTRACT FROM AUTHOR]

Paper‐based microfluidics emerges as an innovative platform for constructing miniaturized electrochemical devices, which mainly benefit from the spontaneous capillary action of paper. Nevertheless, the capillary‐driven flow dynamics on paper are determined exclusively by the intrinsic properties of paper and fluidics, thus lacking the controllability that conventional pump‐based microfluidics can provide. Herein, an approach to regulating the capillary flow on paper is introduced by conjugating the outlets of microfluidic channels with a photothermal module for water evaporation. The capillary flow rate on paper can be handily regulated from 4 to 37 µL min−1 under controllable illumination conditions. As a proof‐of‐concept, prototypical paper‐based microfluidic fuel cells integrated with the photothermal module are constructed. Their peak power density can be boosted from 0.3 up to 2.1 mW cm−2 under the simulated sunlight irradiation. The influence of capillary flow rate on the fuel cell performance is further validated using multiphysics simulations. The present work not only provides a practically feasible method to boost the performance of paper‐based microfluidic fuel cells using solar energy, but also opens a new avenue for modulating the performance of paper‐based microfluidics, which has long been a challenge in this field. [ABSTRACT FROM AUTHOR]

Summary: It is well recognized that combining nonpotable water with solar energy to desalinate water and produce water vapor is an effective route to solve the shortage of fresh water. However, the solar vapor generation suffers from either low solar energy efficiency or complex and high‐cost devices. Herein, we explore a black membrane based on polypyrrole (PPy) and filter paper to enhance solar‐to‐vapor conversion performance, thus providing a low‐cost, stable, and strong efficient solar vapor generator. This device displays high solar‐to‐vapor conversion efficiencies of up to approximately 92.2% and 95.6% under irradiation of 1 and 4 kW m−2, respectively. Therefore, this paper‐based high solar‐to‐vapor conversion and scalable evaporator provides a promising solution to the problem of freshwater scarcity and nonrenewable recourses. [ABSTRACT FROM AUTHOR]

The document is a guest editorial introducing selected papers from the VIth Modern Power Systems and Units Conference organized by the Department of Energy at Cracow University of Technology in Poland. The conference aims to exchange knowledge on power engineering, heating, renewable energy sources, and other related topics. The special issue of Heat Transfer Engineering journal features papers on various topics presented at the conference, including biomass as a fuel, platinum catalysts in fuel cells, and environmentally friendly water distillation methods. The papers have been reviewed by experts in the field and aim to foster scientific cooperation and fruitful collaboration in the future. [Extracted from the article]

A series of dye-sensitized solar cells have been constructed using titania-rich paper industry waste materials. The cells obtained were able to produce solar electricity, but with relatively poor photon-to-current efficiencies reaching only 0.47% and short circuit photocurrent densities up to 1.14 mA × cm −2 , but reasonable fill factors and very good open circuit photovoltage reaching 67% and 719 mV, respectively. The titania-rich waste samples were prepared by removal of water and post-production organic residues and well characterized with XRD, XRF, FT-IR, SEM, TEM, EDS and UV–vis techniques. This paper presents an alternative solution for green energy production and conversion of pollutants to useful materials. [ABSTRACT FROM AUTHOR]