Search

The fabrication and properties of 'fluoroalkylated paper' ('RF paper') by vapor-phase silanization of paper with fluoroalkyl trichlorosilanes is reported. RF paper is both hydrophobic and oleophobic: it repels water ( θappH2 O>140°), organic liquids with surface tensions as low as 28 mN m-1, aqueous solutions containing ionic and non-ionic surfactants, and complex liquids such as blood (which contains salts, surfactants, and biological material such as cells, proteins, and lipids). The propensity of the paper to resist wetting by liquids with a wide range of surface tensions correlates with the length and degree of fluorination of the organosilane (with a few exceptions in the case of methyl trichlorosilane-treated paper), and with the roughness of the paper. RF paper maintains the high permeability to gases and mechanical flexibility of the untreated paper, and can be folded into functional shapes (e.g., microtiter plates and liquid-filled gas sensors). When impregnated with a perfluorinated oil, RF paper forms a 'slippery' surface (paper slippery liquid-infused porous surface, or 'paper SLIPS') capable of repelling liquids with surface tensions as low as 15 mN m-1. The foldability of the paper SLIPS allows the fabrication of channels and flow switches to guide the transport of liquid droplets. [ABSTRACT FROM AUTHOR]

Analysis of rates of tunneling across self-assembled monolayers (SAMs) of n-alkanethiolates SCn (with n = number of carbon atoms) incorporated in junctions having structure AgTS-SAM//Ga2O3/EGaIn leads to a value for the injection tunnel current density J0 (i.e., the current flowing through an ideal junction with n = 0) of 103.6±0.3 A·cm-2 (V = +0.5 V). This estimation of J0 does not involve an extrapolation in length, because it was possible to measure current densities across SAMs over the range of lengths n = 1-18. This value of J0 is estimated under the assumption that values of the geometrical contact area equal the values of the effective electrical contact area. Detailed experimental analysis, however, indicates that the roughness of the Ga2O3 layer, and that of the AgTS-SAM, determine values of the effective electrical contact area that are ~10-4 the corresponding values of the geometrical contact area. Conversion of the values of geometrical contact area into the corresponding values of effective electrical contact area results in J0(+0.5 V) = 107.6±0.8 A·cm-2, which is compatible with values reported for junctions using top-electrodes of evaporated Au, and graphene, and also comparable with values of J0 estimated from tunneling through single molecules. For these EGaIn-based junctions, the value of the tunneling decay factor β (β = 0.75 ± 0.02 Å-1; β = 0.92 ± 0.02 nC-1) falls within the consensus range across different types of junctions (β = 0.73-0.89 Å-1; β = 0.9-1.1 nC-1). A comparison of the characteristics of conical Ga2O3/EGaIn tips with the characteristics of other top-electrodes suggests that the EGaIn-based electrodes provide a particularly attractive technology for physical-organic studies of charge transport across SAMs. [ABSTRACT FROM AUTHOR]

Paper-based platforms for biological studies have received significant attention given that cellulose is ubiquitous, biocompatible, and can be readily organized into tunable fibrous structures. In the latter form, effect of complexity in surface morphologies (roughness, porosity and fiber organization) on cell-substrate interaction has not been thoroughly explored. We infer that altering the properties of a fibrous material should lead to significant changes in cellular microenvironment and direct the deposition of structurally analogous extracellular matrix (fiber-fiber templating) like collagen. Here, we elucidate the effect of varying paper roughness and surface chemistry on NIH/3T3 fibroblasts via organization of excreted collagen. Collagen intensity was found to increase linearly with paper porosity, indicating a 3D culture platform. The intensity, however, decays over time due to biodegradation of the substrate. Stability can be improved by introducing fluorinated alkyl silanes to yield hydrophobic paper. This process concomitantly transforms the substrate to a 2D-like scaffold where collagen is predominantly assembled on the surface, thus changing the cellular microenvironment. Altering surface energy also led to fluctuations in collagen intensity and organization over time for smooth (calendered) paper substrates. We infer that the increased roughness improves collagen adsorption through capillary driven petal effect. In general, the influence of the substrate simultaneously affects its ability to host collagen and guide orientation. These findings offer insights into the effects of secondary structures and chemistry of fibrous polymeric materials on cell culture, which we propose as vital parameters when using paper-based platforms. Unlabelled Image • Collagen secreted from NIH/3T3 fibroblast cells increases linearly with paper porosity. • Paper transitions from 3D to 2D cell culture scaffold when rendered hydrophobic. • Hydrophobic paper relies on capillary driven petal effect for collagen adsorption. [ABSTRACT FROM AUTHOR]