Search

This article proposes a fixed switching frequency (FSF)-based improved model predictive control (MPC) for a five-level active neutral-point clamped (5L-ANPC) converter. Compared to the conventional MPC for 5L-ANPC converter, the proposed MPC significantly reduces the computational burden while ensuring the balance of dc-link and flying capacitor voltages. The proposed MPC optimally selects the control voltage vectors to reduce common mode voltage (CMV), leading to a small CMV of the converter. Using three voltage vectors action per control cycle in MPC, FSF is achieved. Steady-state and dynamic performances of the proposed MPC have been evaluated by experiments. The results verify the feasibility and effectiveness of the proposed MPC method. [ABSTRACT FROM AUTHOR]

As one of the promising power interfaces between the energy storage components and the dc link, dual active bridge (DAB) converters have gained extensive researches. Its reliability and healthy operation under one or even multiple unexpected open-circuit faulty conditions have become one of the main design challenges. Conventional fault detection (FD) and fault isolation (FI) methods exhibit obvious limitations in terms of detection speed, number of FD signatures, universality, accuracy, computational burden, and implementation cost due to the added sensors. To fill in this gap, this article presents a robust, fast, accurate, and low-cost FD and FI method for DAB converters, which is applicable under various operational conditions. The proposed method will adopt the differential switch node voltage between the primary and secondary bridge of DAB converters as the universal fault signature for complete FD and FI. The corresponding fault diagnostic circuit is simple, compact, low cost, and easy in implementation. This sensorless fault diagnostic technique can detect the switch open-circuit fault within a quarter of a switching cycle and realize the fault isolation accurately. A DAB prototype with a fault diagnostic circuit was designed, and main experimental results under various faulty conditions were provided to validate the advantages of the proposed method. [ABSTRACT FROM AUTHOR]

Pulse test techniques are widely adopted in characterizing both the static and dynamic performances of semiconductor devices considering various device structures and operating conditions. For gallium nitride (GaN) devices, due to the current collapse phenomenon, fast and accurate measurement of their key electrical parameters, such as dynamic ON-state resistance ${R}_{\text {ds}, \mathrm{\scriptscriptstyle ON}}$ , switching rising time, fall time, switching losses, and short-circuit (SC) robustness, becomes essential. This article presents a comprehensive review of state-of-the-art pulse test setup methods such as the double-pulse test (DPT), multiple-pulse test (MPT), and SC test (SCT) for the first time, which facilitates the GaN device structure design and practical applications in high efficiency and power density power converters. [ABSTRACT FROM AUTHOR]

In this article, an efficient model predictive control (MPC) using virtual voltage vectors for three-phase three-level converters is proposed. The proposed MPC achieves constant switching frequency by applying four voltage vectors, including one virtual voltage vectors and three other voltage vectors, in each control cycle. In addition, to reduce the computational burden, two-stage MPC approach is adopted. The first stage chooses one of six medium voltage vectors that minimizes the cost function. Then, in the second stage, these voltage vectors including virtual voltage vectors, which locate the same sector with the optimal medium voltage vector, are involved in the MPC optimization. The advantages of the proposed MPC over the classical MPC have been validated through experimental results. [ABSTRACT FROM AUTHOR]

Dual-active-bridge (DAB) converters have been widely recognized as one promising topology for high-frequency-link power conversion applications. However, one critical issue concerning DAB converters is the transient dc-bias current due to the voltage-second imbalance, which may occur frequently in typical dynamic operations of DAB converters such as the start-up, sudden load or output voltage change, and power flow direction change. Due to the high-frequency operation, the dc-bias current of DAB converters will impose more harm to magnetic components because of the limited range of operating flux density and possible magnetic saturation compared with the counterpart low-frequency dc-bias current. Over the past several years, extensive researches have been conducted to address the high-frequency transient dc-bias current of DAB converters under different phase-shift modulation strategies such as single phase shift, extended phase shift, and triple phase shift. In this article, a comparative review of typical dc-bias current mitigation strategies under typical phase-shift strategies for DAB converters is presented. An experimental evaluation of selected strategies under various scenarios is conducted in terms of the settling time, inductor current stress, efficiency, switching number, and implementation complexity. This article ends up with an overview of high-frequency dc-bias mitigation strategies and a discussion for the further optimization. [ABSTRACT FROM AUTHOR]

The dc power transmission system has been obviously attracting more research interests in recent years. In order to satisfy the high-reliability requirement of the dc power transmission system, the power converter should be able to keep uninterrupted operation after multiple unexpected faults. However, high fault-tolerant capability usually leads to the bulky redundant circuit, which increases the cost, volume, and complexity of the power converter. Thus, a fault-tolerant dual active bridge (DAB) converter is proposed to maintain the power transferring ability under multiple unexpected open-circuit faults (OCFs) conditions, which can significantly enhance the reliability of the dc power transmission system. By reconfiguring the central-tapped transformer and two symmetrical auxiliary inductors, the half-bridge conduction branch is built to maintain uninterrupted operation when a single or dual OCF has occurred. The proposed fault-tolerant strategy only requires four extra voltage sensors to detect and locate OCFs for the reconfiguration process. Thus, it significantly improves the system reliability with a low additional cost. Besides, the inductor current, transmission power, and the small-signal models of the proposed fault-tolerant converter have been presented. It proves the proposed fault-tolerant topology can smoothly switch between normal and postfault operation due to the constituency of the inductor current. Finally, the 250-W prototype is designed to verify the advantage of the proposed fault-tolerant DAB converter. [ABSTRACT FROM AUTHOR]

The derivation and implementation of multiple-phase-shift-based switching surfaces for a dual active bridge (DAB) converter is the main focus of this article. First, the mathematical models of multiple natural switching surfaces under different operation states of DAB converters are derived, which lays the foundation to achieve a fast transient response during startup, sudden voltage reference, and load changing conditions. Moreover, in order to improve the overall performance of DAB converters systematically, a minimum-current-stress boundary control (MBC) is proposed that can reduce the inductor peak current stress and achieve fast dynamic response simultaneously by using the multiple-phase-shift-based switching surfaces. The analytical derivation of the proposed MBC is presented together with the simulation and experimental evaluations, which shows the superior performance of the proposed MBC algorithm in terms of the efficiency and dynamic response improvement under various operating conditions. [ABSTRACT FROM AUTHOR]

Compared with the conventional multilevel converters, the hybrid-clamped converter (HCC) reduces the number of power devices, which brings down the converter cost while enhancing its reliability for medium-voltage high-power applications. As one of typical medium-voltage HCCs, the single-phase, six-level HCC (6L-HCC) faces the main technical challenge of the voltage balance among five inner capacitors. Most of the existing pulsewidth modulation techniques cannot solve this problem. Advanced control methods that directly apply a selected voltage vector, such as the classical model predictive control (MPC), may fail to balance the inner capacitor voltages during low output frequencies. In view of this situation, this article proposes an improved MPC approach with autotuning weighting factors. It contributes to ensure excellent performance of 6L-HCC under all operating conditions with well-balanced inner capacitor voltages. Simulation and experimental results are proposed to verify the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques. [ABSTRACT FROM AUTHOR]

An optimized model predictive control (MPC) method is proposed based on the selected switching states to control the four-level hybrid-clamped converter. The proposed method utilizes 64, instead of 512, switching states, compared with a conventional MPC, which greatly eases the calculation burden while achieving the high-quality regulation of output currents and the balance of capacitor voltages. The steady-state performance at both high and low frequencies is investigated, and results are compared with those by the traditional carrier phase-shifted pulsewidth modulation method. The dynamic response to the current or frequency step change is also evaluated. Both simulation and experimental results validate the feasibility and effectiveness of the optimized MPC method. [ABSTRACT FROM AUTHOR]

This paper presents a novel model predictive control (MPC) for the T-type single-phase three-level inverters. The cumbersome procedure in tuning of weighting factors is eliminated so that the implementation of the proposed MPC becomes easy. The constant switching frequency is achieved during the control implementation in order to facilitate the filter design. In order to optimize the distribution of the output current harmonics, multiple voltage vectors are employed in each control cycle with their application times setting inversely proportion to the respective cost function. The redundant small voltage vectors are utilized to balance the neutral point voltage of the inverter by directly regulating the upper and lower dc-link capacitors voltages. Finally, the proposed MPC algorithm is experimentally evaluated and compared with other two unfixed switching frequency MPC algorithms in terms of the steady state, transient performance, and parameter sensitivity. [ABSTRACT FROM AUTHOR]

Model predictive control (MPC) suffers from high computational burden and cumbersome tuning of weighting factors especially for three-level three-phase inverters. Here, a fast finite-switching-state MPC (FSS-MPC) algorithm without weighting factors is proposed. First, the deadbeat control is used to construct the voltage vector reference. Then, the T-type three-level three-phase inverter topology is selected and voltage vectors are carefully tuned in order to minimize the neutral-point (NP) voltage fluctuation. The voltage vectors that are far from the desired voltage vector reference and go against balancing the NP voltage will not participate in the cost function optimization. Thus, only 3 effective voltage vectors instead of totally 27 vectors are required in the implementation of the proposed FSS-MPC algorithm, which saves computation time up to 53.3%. Furthermore, the proposed algorithm makes the tuning of the weighting factor unnecessary, which simplifies the practical implementation and improves the portability of the algorithm. Finally, an experimental prototype was established and main results including the steady-state and dynamic performance were presented to validate the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Originated from analyzing nonactive power loss, a novel optimization method and modulation solution for bidirectional isolated dual-active-bridge (DAB) dc–dc converters are proposed in order to achieve high efficiency in a wide operating range. A comprehensive nonactive power loss model is developed, including both the nonactive components delivered back to the source and from the load. This paper points out that when the minimum nonactive power loss is achieved, zero-voltage soft switching can be naturally fulfilled. The optimal phase-shift pair obtained by the proposed method can keep low values of both root mean square (RMS) current and circulating power. Rather than using ideal power flow analysis, the nonactive power loss model directly embodies practical nonideal factors, including device voltage drops. Based on the analysis, an extended dual phase shift is proposed, and different operation cases are analyzed with comparison of performance indices. Experimental tests verify the theoretical analysis and show effectiveness of the proposed approach to achieve nonactive power loss minimization and efficiency improvement. [ABSTRACT FROM PUBLISHER]

A current-fed high-frequency alternating-current (HFAC) distributed power system is presented in this paper for medium- or high-voltage gate driving applications. The distributed gate driving modules (GDMs) at the high-voltage side are isolated from the low-voltage-side current-source power supply through magnetic coupling of current transformers (CTs), which are assembled by a high-voltage cable carrying HFAC and passing through the center of toroid magnetic cores. The centralized high-frequency current-source power supply is designed and composed of a two-stage resonant inverter and a double \Gamma-CL resonant network. The resonant network is parameterized by considering the tradeoff between the quality factor and component stress. Different magnetic core samples are tested and compared to construct the CTs for improving transmission efficiency. A 400-W prototype was built and experimentally evaluated with two load conditions, including resistive loads and practical GDMs. It showed significant improvements with regard to sinusoidal current output, system stability, and efficiency. Finally, the proposed current-fed HFAC power supply system was successfully applied to a practical solid-state fault current limiter, demonstrating the advantages of multiple outputs ( n > 10), high-voltage isolation, low harmonic distortion, high efficiency, easy installation, and flexible extensibility. [ABSTRACT FROM PUBLISHER]