Search

In recent years, Synthetic Aperture Radar (SAR) Tomography (TomoSAR) has ascertained great potential for the three-dimensional (3-D) reconstruction of observed scenes, especially in urban areas. However, the number of proceed snapshots (observations) is usually less than that of slant height samples (unknowns) in TomoSAR inversion processes. This impairs the quality of the reconstructed vertical information. To cope with this issue and improve the reliability of reconstructed vertical information, this paper investigates the possible potential of a deterministic descriptive regularization-based method. Deterministic descriptive regularization is a well-conditioned optimization framework based on the descriptive idea of a regularization solution. This strategy can help to mitigate the effect of the ill-posed problem. Thus, it can assist SAR tomography to deal with the possible impairing issues arising from low numbers and the distribution of baselines. For this purpose, the result of the proposed strategy is compared with the outcomes from the standard TomoSAR techniques, including Beamforming, Capon, and Minimum Norm. The proposed method for reconstruction of the reflectivity function of the observed scene has been performed on a dataset acquired by the Sentinel-1 sensor in 2022 over Tehran City, Iran. The experimental results indicate that the proposed algorithm can estimate building heights with a vertical accuracy of better than 91%. These results demonstrate the great potential of the proposed method for reconstructing the full 3-D images of urban areas. [ABSTRACT FROM AUTHOR]

The wellbeing of pipelines is influenced by a range of factors, such as internal and external pressures, as well as deterioration over time due to issues like erosion and corrosion. It is thus essential to establish a reliable monitoring system that can precisely examine pipeline behavior over time in order to prevent potential damages. To this end, pipelines are inspected based on internal and external approaches. Radar, as a non-contact sensing system, can be a suitable choice for external pipeline inspection. Radar is capable of the transmission and receiving of thousands of signals in a second, which reconstructs the displacement signal and is used for a vibration analysis. Synthetic aperture radar (SAR) imaging adds cross-range resolution to radar signals. However, a data acquisition rate of longer than several seconds makes it unsuitable for sub-second vibration monitoring. This study aims to address this limitation by presenting a method for high-resolution vibration monitoring using ground-based SAR (GBSAR) signals. To this end, a signal processing method by modifying the radar's signal model is presented, which allows for estimating scattering targets' vibration parameters and angle of arrival with high resolution. The proposed method is validated with numerical simulation and a real case study comprising water pipelines. Moreover, various analyses are presented for the in-depth evaluation of the method's performance in different situations. The results indicate that the proposed method can be effective in detecting pipeline vibration frequencies with micro-scale amplitudes while providing high spatial resolution for generating accurate vibration maps of pipelines. Also, the comparison with the radar observations shows a high degree of agreement between the frequency responses with the maximum error of 0.25 Hz in some rare instances. [ABSTRACT FROM AUTHOR]

Forest characterization and monitoring are highly important for tracking climate change, using ecology resources, and biodiversity applications. Synthetic aperture radar tomography (TomoSAR) provides the opportunity to reconstruct 3-D structures of the penetrable media relying on multibaseline image acquisition. In forest applications, TomoSAR serves as a powerful technical tool for reconstructing forest height and underlying topography. Presently, a number of reconstruction methods are based on fully polarimetric (FP) TomoSAR (Pol-TomoSAR) datasets which require costly data acquisition. The aim of this letter is to go beyond the limitation of the requirement for full polarization by extending tomographic SAR neural network (TSNN), a neural network for TomoSAR, to the case of single-polarimetric (SP) and dual-polarimetric (DP) TomoSAR data for retrieving forest height and underlying topography. Experimental results indicate that TSNN trained by SP or DP TomoSAR data is a powerful candidate to estimate forest height and underlying topography with high accuracy. [ABSTRACT FROM AUTHOR]

In the field of forestry studies, microwave remote sensing has broad applications due to the penetration into the semi-transparent media. This feature is used for the estimation of biophysical parameters and monitoring of deforestation. Therefore, the estimation of biophysical parameters is essential for assessing carbon stock management. Hence, the aboveground biomass (AGB) using synthetic aperture radar (SAR) data is recognized as typical approaches in forest application. However, the integrated use of polarimetric (PolSAR) and interferometric (PolInSAR) data might be more efficient tools for AGB mapping. Accordingly, in this study with the integrated data, the efficiency of machine learning techniques including random forest regression (RFR) and multiple linear regression (MLR) model were assessed and compared for the prediction of AGB. The analyses were performed using an image pair of fully polarimetric Radarsat-2 C-band data set and the related field data of Malhan Forest Range, Dehradun Forest Division, which were collected using the systematic sampling technique. Particularly, the training and testing of the models were done using the field sample plots. The experimental results showed that the RFR algorithm provided a better prediction result of AGB than the MLR model. The correlation coefficient (R2) and root-mean-square error (RMSE) for the RFR algorithm was estimated to be around 0.65 and 24.33 Mg/ha, respectively, while for the MLR model, R2 and RMSE are estimated as 0.54 and 33.05 Mg/ha, respectively. Therefore, it was concluded that the prediction of AGB through the machine learning technique using PolSAR and PolInSAR data has a significant advantage for accurate estimation of the AGB. [ABSTRACT FROM AUTHOR]

The detection of multiple interfering persistent scatterers (PSs) using Synthetic Aperture Radar (SAR) tomography is an efficient tool for generating point clouds of urban areas. In this context, detection methods based upon the polarization information of SAR data are effective at increasing the number of PSs and producing high-density point clouds. This paper presents a comparative study on the effects of the polarization design of a radar antenna on further improving the probability of detecting persistent scatterers. For this purpose, we introduce an extension of the existing scattering property-based generalized likelihood ratio test (GLRT) with realistic dependence on the transmitted/received polarizations. The test is based upon polarization basis optimization by synthesizing all possible polarimetric responses of a given scatterer from its measurements on a linear orthonormal basis. Experiments on both simulated and real data show, by means of objective metrics (probability of detection, false alarm rate, and signal-to-noise ratio), that polarization waveform optimization can provide a significant performance gain in the detection of multiple scatterers compared to the existing full-polarization-based detection method. In particular, the increased density of detected PSs at the studied test sites demonstrates the main contribution of the proposed method. [ABSTRACT FROM AUTHOR]

With reference to the application of multichannel (polarimetric or interferometric) synthetic aperture radar (SAR) data, despeckling is a mandatory task in order to exploit fully the image information. Thanks to the long-standing studies, there exist several despeckling techniques that have shown to be powerful tools for filtering multichannel SAR images. Often, such techniques rely on the estimation of the covariance matrix. However, in the literature, the performance evaluation of the filtering operation, which represents a fundamental aspect, has been mainly addressed for a single intensity/amplitude SAR image. In this letter, we present two nonreference indices for the evaluation of the polarimetric/interferometric covariance matrix. The proposed quality indices assess the statistical similarity of the ratio between the original and filtered covariance matrices to the properties derived from the pure speckle model. The analyses both on simulated and real data show that the results of filter ranking by the proposed method are in agreement with the visual evaluation and are consistent with the common polarimetric quality measures. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) interferometry (InSAR) has shown great potential in the monitoring of Earth’s surface and detection of the possible slow temporal deformations. Within the framework of multibaseline SAR interferometry, the availability of multiple interferograms obtained from multipass satellite observations can significantly improve the accuracy of the estimated target parameters, i.e., the residual height and the mean deformation velocity. The parameters can be estimated in the maximum likelihood (ML) sense and through the data covariance matrix. However, the presence of artifact and outliers may impair the parameter estimation, specifically when the candidate cells are subject to temporal decorrelation and atmospheric phase noise effects. In this letter, the exploitation of contextual spatial information is proposed to reduce the possible ambiguity and improve the accuracy of ML-based parameter estimation. The proposed approach adds a regularization term (or a constraint) to the ML’s model in order to include the information about the scene velocity variation. Hence, the resulted nonconvex optimization is resolved using the graph-cut concept. The method is evaluated using the simulated and two real data sets acquired by Constellation of Small Satellites for Mediterranean basin Observation (COSMO-SkyMed) and Sentinel-1A sensors over Tehran, Iran; and the results are validated using the global positioning system-based measurements. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) tomography has shown great potential in multi-dimensional monitoring of urban infrastructures and detection of their possible slow deformations. Along this line, undeniable improvements in SAR tomography (TomoSAR) detection framework of multiple permanent scatterers (PSs) have been observed by the use of a multi-looking operation that is the necessity for data's covariance matrix estimation. This paper attempts to further analyze the impact of a robust multi-looking operation in TomoSAR PS detection framework and assess the challenging issues that exist in the estimation of the covariance matrix of large stack data obtained from long interferometric time series acquisition. The analyses evaluate the performance of non-local covariance matrix estimation approaches in PS detection framework using the super-resolution multi-looked Generalized Likelihood Ratio Test (GLRT). Experimental results of multi-looking impact assessment are provided using two datasets acquired by COSMO-SkyMED (CSK) and TerraSAR-X (TSX) over Tehran, Iran, and Toulouse, France, respectively. The results highlight that non-local estimation of the sample covariance matrix allows revealing the presence of the scatterers, that may not be detectable using the conventional local-based framework. [ABSTRACT FROM AUTHOR]

Over the past years, synthetic aperture radar (SAR) tomography (TomoSAR) has indicated significant potentials for three-dimensional (3D) reconstruction of buildings in urban areas. A large number of SAR images are thus required to perform tomographic inversions in non-parametric spectral estimators. To this end, in the case of a limited choice of SAR acquisitions, the present study aims to evaluate the capabilities of five non-parametric spectral estimation (SE) techniques, including linear prediction (LP), maximum entropy (ME), and minimum norm (MN), Capon, and beamforming (BF) in the tomographic reconstruction of urban environments. The performance analysis is carried out by using both simulated and real SAR datasets. The study results demonstrate that the proposed efficient LP estimator, minimizing the average output signal power over the antenna array elements, can separate the layover scatterers along the height direction. This low-computational SE method is thus able to clean side lobes while using a small number of observations. The proposed algorithms, as applied on TerraSAR-X strip-map images of the city of Tehran, Iran, verify the effectiveness of the non-parametric LP reconstruction technique for urban buildings. The estimated height of the scatterers also indicates that the LP estimator is similar to the field-based measurements once compared with ME, MN, Capon, and BF reconstruction methods. [ABSTRACT FROM AUTHOR]

In recent years, there has been a growing interest in the development of ground-based Synthetic Aperture Radars (GBSAR) for the purpose of monitoring structural displacements. GBSAR offers high-resolution monitoring over a wide area and can capture data every few minutes. However, compact high-frequency multiple input multiple output (MIMO) radars have emerged as an alternative for monitoring sub-second displacements, such as structural vibrations. MIMO radar has sub-second acquisition interval. However, it has limited cross-range resolution compared to GBSAR, and interference between antennas and presence of multiple scatterers in the scene can cause strong sidelobes in the processed data. On the other hand, GBSAR utilizes a long synthetic aperture to achieve high cross-range resolution. However, due to its longer data acquisition time compared to MIMO radar, conventional methods are insufficient for detecting scatterers' sub-second displacements that occur during the data acquisition process. This study proposes a method to effectively monitor sub-second or sub-minute displacements using GBSAR signals. The proposed method enhances the conventional radar interferometric processes by employing spectral estimation, allowing for multi-dimensional detection of targets' azimuth angle, linear displacement, and vibrational characteristics. Consequently, this method improves both the processing of MIMO radar data and enables high-resolution fast displacement monitoring from GBSAR signals. The paper presents the theoretical details and mathematical formulations of the proposed method for both MIMO radar and GBSAR imaging modes. To evaluate the effectiveness of the proposed method, numerical simulations and real experiments are conducted. The experimental results validate the capability of the proposed method in both GBSAR and MIMO configuration modes for high-resolution monitoring of fast linear displacements and vibrations. The results exhibit promising signal-to-noise ratio (SNR) and peak-to-sidelobe ratio (PSLR) values. [ABSTRACT FROM AUTHOR]