Search

Wood is biomass made from lignocellulose, the main raw material for pulp production, both species of hardwood and softwood. Utilization of as much wood as possible, including less-known wood species, is widely open because the availability of good quality wood for industry raw materials is increasingly limited. In general, all wood species can be used for paper pulp. But the selection of types of lignocellulosic material with specific properties, such as physical, anatomical and chemical, play an important role in efficiently using wood as raw materials for pulp and paper. This research was carried out to examine wood properties (specific gravity, fiber quality and cellulose content) of four less-known hardwoods from natural tropical rainforest in South Sulawesi province of Indonesia and assessed their potential use for paper pulp. Those hardwood species comprised of cempedak (Artocarpus integer Merr.), jabon merah (Anthocephalus macrophyllus Hav.), saling-saling (Artocarpus teysmanii Miq.) and simpur (Dillenia serrata Thunb.). The specific gravity determined by the weight of oven dried wood and volume of air dried wood where the wood volume be measured by water immersion method, the fiber dimensions measured through maceration preparations which was made using the Franklin procedure, while TAPPI method used for chemical analysis. In condition to paper pulp raw material, the specific gravity (0.40 – 0.69) is categorized as moderate, the fiber quality is classified as good (class II), and cellulose content (40.12% - 52.47%) is categorized as moderate to high for all those less-known hardwoods. All four less-known hardwoods studied potentially use for paper pulp raw materials. But simpur has the most potential due to long fiber and higher specific gravity. [ABSTRACT FROM AUTHOR]

This study aims to analyze Indonesia's strategy in facing the Voluntary Partnership Agreement on Forest Law Enforcement Governance and Trade (FLEGT-VPA) cooperation agreement between the European Union and Indonesia to improve the export performance of Indonesian wood products to the European Union market. With research, an analysis of the opportunities and challenges that Indonesia intends to face in maintaining the stability of the export activities of Indonesian wood products and improving the quality of these wood products so that they can be accepted based on the standards of the destination country. FLEGT-VPA is a bilateral agreement between the European Union and timber exporting nations to improve forest sector governance and ensure that timber and wood products supplied into the EU are produced in line with partner country laws and regulations. The issue that a developing country like Indonesia wants to experience in an effort to improve the quality of wood products according to the standards of the destination country is a large number of illegal logging, illegal timber sales and others. This study focuses on the pulp and paper industry and uses qualitative analysis research methods and analyzes the data collection techniques from various sources. The increase in the export performance of Indonesian pulp, paper and, paperboard to the European Union from 2016 after the ratification of the FLEGT-VPA shows that the quality of Indonesian products is promising to spread in the European Union market. [ABSTRACT FROM AUTHOR]

Paper waste production in DKI Jakarta according to data from The Jakarta's Environmental Services reaches an average of 40% of total waste production per month for each municipality (kotamadya). On the other hand, Indonesia's necessity of construction development, notably residential home, is increasing constantly along with the amount of Indonesia's population. This condition stimulates innovation of eco-friendly, inexpensive building material with suitable strength. Since 1990's, papercrete, concrete with waste paper as substitution of fine and/ or coarse aggregate, has been studied. Its use for structural materials has evolved and required supporting research for application on larger structural components. In this research, homogeneity aspect of papercrete from domestic waste (office) is investigated along a certain height of vertical beam. To do so, Ultrasonic Pulse Velocity (UPV) propagation measurement on 5 vertical prismatic beam specimens was conducted. By using direct mode transmission, two transducerswere used through 15 cm of width. Rate of propagation can detect the density of concrete at each level since early age of concrete (2 hour after casting). It describes the distribution of material inside. This homogeneity study is beneficial in evaluating papercrete application in real beam structure in the future. [ABSTRACT FROM AUTHOR]

Moodle-based Learning Management Systems have been widely used in learning during the Covid-19 pandemic, especially in Indonesia. In this regard, this study aims to identify and describe the implementation of the Whole Language Approach in improving the ability to write simple scientific papers for students at PGRI Yogyakarta University through the Moodle-based Learning Management System. The method in this research is descriptive qualitative with data in the form of descriptions of the results of research implementation supported by observations, interviews, theoretical studies, and relevant research. The results of this study indicate an increase in the ability to write student scientific papers in the experimental class after using the Whole Language Approach through Moodle-based LMS in learning to write. Several aspects that were assessed were structure, systematics, language use, content coherence, and references used. This increase is indicated by the test numbers before and after the use of the Whole Language Approach through the Moodle-based LMS with mean values of 6.5 to 8.8 in the experimental class, and 6.7 to 7.1 in.the control class. This shows that the use of the Whole Language Approach through Moodle-based LMS is proven to improve students' ability to write simple scientific papers. [ABSTRACT FROM AUTHOR]

Cancer is the uncontrolled growth of new cells beyond the normal limits. The process by which cancers invade and spread to the other organs is called metastasis, this condition became the leading cause of death. One of detection methods that are currently used to detect tumors and metastatic tissues is conducted with radiopharmaceutical of [18F] fluoro-2-deoxy-2-D-glucose ([18F] FDG). This method is quite accurate, but is relatively expensive because it needs PET / CT camera that is still limited in Indonesia. Therefore, this study was conducted to develop other imaging methods using SPECT-CT camera that is cheaper and easy to reach especially for developing countries. Labelling 2-deoxy-D-glucose with technetium-99m (99mTc) indirectly using diethylenetriaminepentaacetic acid (DTPA) as a co-ligand / bifunctional agent has been carried out. The determination of the optimum conditions for the labelling of 99mTc-DTPA-DG were done by varying the amount of reducing agent (SnCl2.2H2O), ligand (2-deoxy-D-glucose), pH, and incubation time. Radiochemical purity of 99mTc-DTPA-DG was determined by ascending paper chromatography and electrophoresis paper. The results showed that the labelling optimum conditions of 99mTc-DTPA-DG was achieved by the number of ligand 2-deoxy-D-glucose as much as 2 mg, co-ligand DTPA 750 µg, 50 µg SnCl2.2H2O, the reaction takes place at pH 6 with an incubation time of 30 min at room temperature. 99mTc-DTPA-DG has a radiochemical purity of 93.16±1.31% and the electrophoresis results showed that there is a difference between the peaks of 99mTc-DTPA-DG with other impurities including 99mTc-DTPA. [ABSTRACT FROM AUTHOR]

Borassus flabellifer L. becomes one of the palm-based commodities in Indonesia that can grow well in dry areas, especially around the north coast of Java Island. An abundant waste of this plant, in the form of leaf midrib and fruit fiber, has a potential as a source of lignocellulose for the paper industry. In the present study, Kraft paper production was conducted to know the influence of the proportion of leaf midrib and fruit fiber of Borassus flabellifer L., and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of Kraft paper. The research method was a Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of Kraft paper. The ANOVA analysis was used to examine the physical quality of Kraft paper. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but insignificant between treatment of Gramatur and tear resistance. The best treatment of sensory tests was Kraft paper with proportion of 50% leaf midrib pulp, 50% fruit fiber pulp, and 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, Gramatur of 162.80 (g/m²), tensile strength of 1.70 (%), and tear resistance of 197.6 (gf). [ABSTRACT FROM AUTHOR]

The pulp and paper making industry is looking for new main raw material based on its physical, chemical and morphological characteristics. Currently in this industry, bagasse is the most useful raw material in pulp and paper industry. The objective of this study is to determine its suitability for pulping. Acacia auriculiformis is a fast-growing tree normally found in Indonesia and Australia. Acacia auriculiformis leaf contains of cellulose, hemi-cellulose and lignin. The range of lignin content in Acacia auriculiformis is 19%-20%. The hemi-cellulose and lignin contents was removed by soda-pulping process using different concentrations as followed; 3%, 5%, 10%, 15% and 20%. In order to determine the optimum pulping conditions for Acacia auriculiformis craft paper, several tests were conducted such as apparent density, tear test, tensile strength test and moisture absorption. It was found that the Acacia auriculiformis fibre treated with 3% sodium hydroxide (NaOH) solutions gave good tear test of the paper. For apparent density test, the best concentration of NaOH used for treating Acacia auriculiformis pulping is at 15%. From the study, the optimum concentration of NaOH in treating Acacia auriculiformis fibre is at 5% for best result in tensile strength. Hence, from the overall tests, 5% concentration of NaOH is the optimum value. From the findings, Acacia auriculiformis fibre has a potential to be used in paper making and food packaging industry. [ABSTRACT FROM AUTHOR]

Indonesia has targeted to reach 23% of renewable energy share by 2025. In order to meet the target, many researchers have focused on the explorations of renewable energy resources. One of the potential solutions to meet the target is the agricultural wastes, include corn cobs and areca nut fiber. In this study, the calorific value of corn cobs and areca nut fiber are tested. The corn cobs and areca nut fiber are collected from the farmers in Sumatera Utara province of Indonesia. In addition, the Paper waste is also tested. A bomb calorimeter of IKA C6000 is used to measure the energy content of the biomass. The results show that the calorific value of Corn cobs and Areca nut fiber is 5573 Cal/g and 4946 Cal/g, respectively.By using the average yearly production of Corn and Areca nut, these calorific values similar to 4,539 TOE and 4,653 TOE, respectively. If the potency can be used to replace the coal as an alternative fuel, this potency will reduce the Greenhouse gas (GHG) emission. The potency of mitigation GHG by replacing Corncob and Areca nut fiber are 18,306 and 18,491 ton of CO2e. [ABSTRACT FROM AUTHOR]

In recent years, with the increase of online learning platforms, obtaining learning behavior data from students, are becoming easy. However, analyzing the data to extract meaningful information remains challenging due to the data volume and complexity. Here, we apply Self-organizing Maps (SOM) to visualize the learning characteristics of many elementary students over many online assignments in mathematics class. As a case study, this research used the data log of MONSAKUN, a digital learning environment that focuses on exercising arithmetic using story-based questions by using a problem-posing approach with the integration of mathematical sentences. Our primary objective is to give intuitive understanding to the teachers regarding the students' performance that subsequently allows the teachers to generate meaningful advices. Here, SOM generates a two-dimensional map that preserved the topological order of high-dimensional learning characteristics data, in which students with similar learning characteristics are located close to each other, while students with significantly different characteristics are distanced from each other. We are interested especially in locating low-performing students, as they are the most important to be given advice by the teachers. By locating the low-performing students and other students in their vicinity on the map, the teacher may be able to use other students as references for improving the low-performing students' performances. The idea is to mimic the learning characteristics of the students designated as references. Due to the learning characteristics similarity, the low-performing students do not need to make drastic changes in their learning styles. It can be expected that by iterating this process over many assignments, the students' performances will gradually be improved. In this paper, we utilized a digital learning platform MONSAKUN, for learning arithmetic used in Japan. In this paper, we present our preliminary results in the form a learning-visualization of characteristics students of analytical and advisory tools and described our future goals for building a more flexible and general tool that can be deployed in Indonesia. [ABSTRACT FROM AUTHOR]

Performance based design is believed to be the next important alternative design method for designing high rise building in Indonesia. This method can also be used to evaluate existing building in order to check the building's performance level. This paper will discuss HALIM High Speed Railway Station project, which is a train station consist of 3 stories with a 226,8 meters long railway on the third floor. Jakarta Building Authority/TABG (Tim Ahli Bangunan Gedung) considers HALIM Station also as a bridge infrastructure rather than just an ordinary building; and not to mention that HALIM Station is the first high-speed railway station in Indonesia. Therefore, in order to make sure the structural safety, TABG requested to do a Performance Based Design analysis to check the response modification factor (R) and its performance level. While there are several ways to perform performance based design, this paper will use non-linear static pushover analysis only. Pushover analysis will be applied on the model based on seismic parameters referred to Indonesian code SNI 1726:2012 and also SNI 1726:2019 even though HALIM Station have been designed before the SNI 1726:2019 is enforced thoroughly. The result shows that all the code methods used on pushover analysis give the same Immediate Occupancy (IO) performance level category. Furthermore, the response modification factor (R) obtained by pushover analysis is greater than the originally defined. Thus, the structural design using the original response modification factor of 8 is on the safe side. [ABSTRACT FROM AUTHOR]

One of the main problems faced in the property management industry especially in Indonesia is limited knowledge or even ignorance of the important role of information technology and information systems in supporting and developing their business. Whereas in a world that is currently heading towards the digital industry and the trend of industry 4.0 which is on the rise, IT and IS components are needed. This paper will explain the important role of IT and IS to help understand their use, and how they can help businesses to grow in the property management industry which is increasingly competitive. The research method used in compiling this paper is in the form of observation of problems in the field. The result of this research is an Information Technology Support Model in the use of information technology to support the property management business. [ABSTRACT FROM AUTHOR]

As a result of the advancement of technology, Indonesia's focus has shifted to the enhancement and simplification of everyday transactions. This is highly common in the widespread use of e-wallets as a payment method for digital transactions involving multiple verification methods, including PIN, Password, Face Recognition and others. This study was conducted by distributing questionnaires to 385 respondents from generation Z in Indonesia who utilized face recognition as a security verification method for digital transactions. The purpose of this paper is to demonstrate the security and efficacy of facial recognition in digital wallet payment verification applications as experienced by users. With the use of the TAM model's analysis, it is proved that all the variables used are significantly related, allowing one to conclude that the safety and efficacy that are possessed are adequate. This paper also supports the growth of trust factors and reasonings for the usage of face recognition in digital transaction self-verification. [ABSTRACT FROM AUTHOR]

According to Indonesia's National Guidelines on Green Buildings (Kemen PUPR No,21,2021) called Penilaian Kinerja Bangunan Gedung Hijau (BGH), green buildings are mandatory for new and existing buildings. As environmental concerns grow, the Government uses these ratings to control energy consumption. A government initiative aims to increase demand for environmentally friendly buildings. This paper evaluates BGH's green building rating system for project certification in two Indonesian cities, Jakarta and Padang Paser Utara. Jakarta is the capital of Indonesia, the largest and one of the most populous urban city in Indonesia. Moreover, the new Indonesia capital city, Nusantara, will be built in Penajam Paser Utara, East Kalimantan. Using the results of this research, recommendations and suggestions can be given related to the design of green buildings both in Jakarta and Penajam Paser Utara. Evaluations will be conducted on simple residential buildings. The results of these studies indicate that designers and architects may have difficulty incorporating this rating systems into their designs. An evaluation of BGH ratings and sustainability analysis can be performed with building information modeling and a conceptual framework is presented toward the end of this paper. A rating system's success depends heavily on discussion among all stakeholders, including architects, engineers, environmentalists, governments, and communities. Indonesian experts in the building sector should take part in and contribute to this project. [ABSTRACT FROM AUTHOR]

This study is based on the problem of microplastics found in water, where plastic packaging is now widely used in food and beverage packaging and raises social concerns about its health effects. The microplastics, small plastic particles with a size of 5 mm or less, found in the body can be toxic, cause hormonal imbalances, heart disease, infertility, and obesity. Research on methods for analyzing microplastics in water is still limited in Indonesia, this study identify and analyze the microplastic content in the drinking water and its saurce in Indonesia using raman spectroscopy method. The analysis of microplastics content was performed on various drinking water samples and their sources. The test included 7 water samples from different brands, water sources and different water bottle industries in Indonesia. Content analysis was performed in three stages, starting with the preparatory stage, the filtration process. The filtration process is performed using filter paper that matches the size of the sample to be inspected. In addition, various particles trapped in the filter paper were analyzed under a microscope to separate the microplastic particles. At last, a raman spectroscopy test was performed to determine the type of microplastics present in the contents of the water sample. Through the analysis and study of the content of various water samples carried out, the analyzed water content found various types of microplastics in the form of fragments, fibers, filaments, and films, most of which were PET (Polyethylene terephthalate). There are also found to be polypropylene and PVC (Polyvinyl chloride). [ABSTRACT FROM AUTHOR]

The steel industries account for 6% of the world's CO2 emissions. The number of emissions will continue to increase as the steel industry in Indonesia grows. Generally, steel production uses blast furnaces which can produce large CO2 emissions. The blast furnace process emissions called blast furnace gas (BFG) contain 20.7% mol of CO2. The high CO2 content also causes the calorific value of the gas to be low, so the gas must be purified to increase its calorific value to be used for power generation. In addition, the steel industry also produces steel slag as waste with a high CaO content (45.2%) but with low economic value. To increase its economic value, CaO content can be used to absorb CO2 from BFG to produce Precipitated Calcium Carbonate (PCC). The use of PCC is very broad for various industrial needs, such as a filler in the paper industry which can increase paper brightness. Therefore, the "Precipitated Calcium Carbonate from Blast Furnace Gas and Steel Slag" plant is expected to be a solution to reduce CO2 emissions from the steel industry. BFG and steel slag as raw materials were obtained from PT. Krakatau Posco. The PCC production process consists of three main stages, namely: (1) Pre-Treatment Steel Slag; (2) Carbonation; and (3) Purification. In the pre-treatment stage, the pH-swing method was used to extract CaO with NH4Cl solvent using pH control. The use of NH4Cl solution is advantageous because it can be recycled. This process obtained a solution of CaCl2 and NH4OH, which was then reacted with CO2 from BFG in a bubble column reactor, resulting in a carbonation process. In the reactor, PCC (CaCO3) and several impurities are formed. The PCC solids formed will then be filtered, dried, and reduced in size so that the moisture content and size are under PCC specifications for the paper industry. Besides producing PCC, purified BFG will be recycled and used as fuel for power generation. The plant location is integrated with PT. Krakatau Posco in the industrial area, Cilegon, Banten, West Java, with a production capacity of 12,750 tons/year. From the results of the economic analysis, with the capital expenditure (capex) of about IDR 337 million and operational expenditure (OPEX) of about IDR 89 million: the payback period is about 6.35 years, and the break-even point (BEP) is 32.38%. [ABSTRACT FROM AUTHOR]

The need for renewable energy is highly increasing worldwide to fulfil energy demand as well as reduce the impact of global warming. Indonesia as the most extensive archipelago face real challenge to power its remote areas with green electricity. This paper assesses economically the idea of hybrid power plant of solar and/or biomass to electrify Indonesian remote areas with green electricity. Furthermore, the carbon credit as an additional income of this project is estimated using CDM methodology. The project is proposed in Sakti, Batukandik, and Batumadeg villages in Nusa Penida Island, Bali; the ER are 7460.57, 2587.10, and 9044.84 tCO2e/year, accordingly. The IRR is analyzed under two scenarios: the initial electricity cost of USD 0.15/kWh and the reduced cost of USD 0.10/kWh including carbon credits and biochar sales. The sensitivity analysis is conducted to observe the effect of most tentative variables towards the IRR. Furthermore, determining the feasibility of this project by analyzing the ERR is assessed to be important, whether it is profitable for the community or not. For the ERR analysis, there are two results calculations. The ERR value with the application of carbon credits shows 32.66%. In comparison, the ERR value without the application of carbon credits shows 28.19%. These values are obtained from several parameter calculations in the ERR analysis in this study. It consists of a consumer surplus, which is computed from the benefits obtained by PLN. Then, the producer surplus and job increases are computed from the benefits obtained by the community if this project is executed. This paper result has essential role in contribution to social, economic, and environmental goal for sustainable development and supporting national economic activities. [ABSTRACT FROM AUTHOR]

COVID 19 disease has spread worldwide, disrupting the economy, society, education, and health. It became crucial to understand the transmission curve and identify the best action in combating this highly transmissible epidemic. Epidemiological parameters of the deterministic Susceptible-Infected-Removed (SIR) model are widely used in explaining the characteristics and behavior of the disease spreading. Disease like COVID-19 is highly influenced by the uncontrolled factors of randomness, hence in this paper, the deterministic susceptible-infected-recovered-death (SIRD) model is extended to the stochastic SIRD (SSIRD) model. SSIRD model takes into consideration the noisy behavior of the process which explains the uncontrolled effects of the COVID-19 outbreak. The epidemiological parameter of the model changes throughout the epidemic due to external factors such as enforcement and public obedience to the control measures as well as the changes in healthcare facilities. These parameters need to be estimated. This paper estimates the epidemiological parameters of the SSIRD model using the Markov Chain Monte Carlo (MCMC) method of the Metropolis Hasting algorithm. The COVID-19 data from Malaysia and Indonesia are used and the dynamical behavior of the COVID-19 outbreak in both countries is simulated. The results show the parameter changing due to the uncontrolled factors influencing the trend of the pandemic curve. [ABSTRACT FROM AUTHOR]

The implementation of Community Activities Restrictions Enforcement (PPKM) during the Covid-19 pandemic reduced activities in the transportation sector. This paper presents the measurement of Carbon Monoxide (CO) concentrations during the PPKM in Makassar City, Indonesia. The samples were collected weekly from August to September 2021 from two traffic-heavy roads using Tedlar bags and a vacuum pump and then analyzed using the Non-Dispersive Infrared method (NDIR). Results showed that the average concentrations of CO on the first street in the morning, midday, and afternoon were 826.63±83.34 µg/m3, 685.65±57.43 µg/m3, 861.6±59.79 µg/m3, respectively; and on the second street were 875.46±77.80 µg/m3, 741.80±62.95 µg/m3, 833.04±44.80 µg/m3, respectively. These CO concentrations measured during the PPKM are lower than those measured before the PPKM on the same sites, reported in another paper. The concentrations are also much lower than those of the Air Quality Standard in Makassar, 30,000 µg/m3. This finding implies that similar policies to reduce traffic and pollution, such as car-free-day, should be enacted to improve air quality. [ABSTRACT FROM AUTHOR]

Urban planners often have a good vision for the urban environment, but that vision is usually limited to visual aesthetics. The sound-based qualitative perspective of the urban environment, which includes sonic and ecological diversity in urban design, is generally ignored. The soundscape approach can be the most effective system for application in urban planning. This paper aims to apply the soundscape approach to urban planning and explore the impact of sound on the formation of urban open spaces through a case study of the Surakarta City parks Indonesia. A mixture of quantitative and qualitative research methods was used. The quantitative method was used to measure background noise using a sound level meter and visualize with a surfer mapping software. The qualitative method was used to observe behavior, the physical environment and perception through interviews. In this context, the paper concludes that the concept of the soundscape is a well-established theme in acoustic environments to identify acoustic data that is compared with the human perception of the environment. Human perceptions of the natural environment and elements of natural sounds, as physical factors, can shape human settlements into a better living environment. [ABSTRACT FROM AUTHOR]

Advancements in technology are a double-edged sword in terms of nuclear safety and security. In recent years, the increased use of drones or unmanned aerial vehicles (UAV) has created both opportunities and new threats to nuclear security. UAV intervention has a wide range of applications that could be a threat to nuclear facility, including aerial shooting, the possibility of stealth smuggling of prohibited substances and objects both to and from nuclear facility protected areas, or sabotage with potential damage to critical infrastructure elements, blackouts, and looting. As a result, nuclear facilities that lack effective means of detecting and combating UAV may be vulnerable to the spread of dangerous materials and terrorist sabotage attacks. Considering the various UAV threats, nuclear facilities must take practical measures to protect themselves at the facility level based on the established UAV threat criteria such as early detection and identification, appropriate response and disablement measures. The action taken to ensure that a nuclear facility is prepared to withstand UAV threat include ensuring that regulations exist as a legal basis and that a nuclear facility has a Physical Protection System (PPS) capable of carrying out detect, delay, and response functions. Many international governments have issued warnings to small UAV (drones) owners, urging them to obtain official licenses before flying their photography drones. The use of UAVs in Indonesia is governed by Regulation of the Minister of Transportation of the Republic of Indonesia Number PM 27 of 2021, PM 37 of 2020, PM 63 of 2021, and PM 34 of 2021. The purpose of this paper is to examine the readiness of PPS in Serpong Nuclear Facility, and the result of this paper will be used as a recommendation for developing the PPS and/or the nuclear security regulation in Indonesia. [ABSTRACT FROM AUTHOR]

The implementation of green building is believed to be a key factor in achieving sustainable development in the building sector. The Green Building Council Indonesia is responsible for the development and deployment of green buildings in Indonesia, and has released version 1.2 of the Greenship rating tools for evaluating new green buildings. The use of renewable energy sources in green buildings is highly encouraged, with one point awarded for every 0.5% of energy usage covered by renewable energy, up to a maximum of five points. The installation of rooftop PV systems is a popular choice for renewable energy in many governmental green-rated buildings, but it is important to determine the ideal capacity to prevent overpriced installation costs. This paper proposes a method where the focus is on gaining maximum points in renewable energy and minimizing investment costs, rather than maximizing installed capacity. This approach can reduce capacity by up to 68%. Another important consideration is choosing the optimum grid connectivity type, and the paper discusses the options of on-grid or zero export schemes. Zero export scheme is chosen for this case since the capacity of the PV system is much smaller than the grid power connection. [ABSTRACT FROM AUTHOR]

Cancer is the second leading cause of death globally and increasing every year, including in Indonesia. Promethium-149 (149Pm) is one of beta-emitting (Eβ-max of 1.07 MeV and T1/2 of 2.21 days) radiolanthanides that can be used for therapeutic application. Radioisotope of 149Pm can be produced with high specific activity that was suitable for labeling of biomolecule as a targeted radiopharmaceutical for cancer therapy. Radiochemical separation of 149Pm from irradiated of neodymium oxide (Nd2O3) target with 98.4% neodymium-148 (148Nd) isotope enrichment has been carried out based on extraction chromatography method using LN (Eichrom) resin column. The target material was irradiated at Bandung TRIGA 2000 reactor. Radiochemical purity the final product of 149PmCl3 radioisotope was determined using paper chromatography and paper electrophoresis methods. Radionuclide purity of 149PmCl3 solution was determined using a gamma-ray spectrometer equipped with HP-Ge detector and a multichannel analyzer (MCA). The results show that the optimum condition on separation of 149Pm from irradiated of Nd2O3 target with 98.4% 148Nd isotope enrichment was obtained using 1.5N HNO3 solution at temperature of 80 °C as mobile phase. The yield of 149Pm obtained from the separation was 97.8 ± 2.1%. The final product of 149PmCl3 radioisotope has physico-chemical characteristic that meet the requirements for nuclear medicine applications with radiochemical purity and radionuclide purity of 99.7 ± 0.2% and 99.9 ± 0.1%, respectively. The solution of 149PmCl3 was clear, with the pH of 1 and stable for 1.5 weeks at room temperature. [ABSTRACT FROM AUTHOR]

While cigarette use has been addressed as a global health problem, most smokers still find difficulties and barriers in accessing health facilities or finding a suitable method to quitting the habit. This paper will discuss the study exploring a self-help group on an online-based platform, namely Facebook, in Indonesia. This study adopted quasi-experimental, with pre and post-test using the control group as the previous ethical clearance. The respondents consisting of thirty-two smokers were recruited on non-probability sampling with the purposive sampling method. The data were collected by using a valid (r=0,666) and reliable (r=0,846) Richmond Test motivation questionnaire. Wilcoxon and Mann-Whitney tests were used to analyse them further. The study revealed low participation on the online platform with discussion based on a self-help group. There was no significant motivation improvement among the experimental group after the intervention, as well as no significant difference in motivation improvement between the control and the experimental group upon pursuing the program (p>0,05, t=0,058). In terms of low involvement, an online platform was less effective in improving quit-smoking motivation among smokers. Further research is needed to develop more interactive and longer interventions to facilitate cost-effective smoking cessation through social media. [ABSTRACT FROM AUTHOR]

Massive utilization of firewood faced problems related to deforestation and harmful emissions. Indonesia experiences the fastest deforestation rate in the world (1000 km2/year). Household air pollution (HAP) resulting from the smoke of burning firewood causes premature deaths of around 165,000 to 68,000 each year in Indonesia. Liquified petroleum gas (LPG) and electricity are projected to be clean energy sources for households; however, switching to LPG fuel or electricity for remote rural households is constrained by their limited financial ability. Therefore, shifting the energy supply of rural communities from wood to fuel from agricultural waste can reduce the risk of deforestation, while reducing HAP is done by forming it into bio-briquettes. Manufacturing rice husk (RH) or carbonized rice husk (CRH) for bio-briquette fuels is intended to solve the problem of massive woody biomass and improve the combustion process to reduce the risk of HAP. This paper specifically investigates and compares the physical and chemical properties of RH and CRH as a first step to verifying their potential as bio-briquette materials. [ABSTRACT FROM AUTHOR]

This paper depicted the subsurface structure in geothermal prospective area in Mount Talang, West Sumatera, Indonesia. Data were gathered from magnetic field yielded from Miligauss Meter at 144 sites surrounding Garara Hot Spring. Magnetic anomaly value was obtained from the raw data and was corrected by using IGRF and diurnal variation. Reduction to pole and upward continuation were applied to remove noise and separate local and regional anomalies. It was then sliced, and subsurface modeling showed that the incision consists of 4 types of layers. The topmost layer was identified as volcanic sedimentary rock dominated by clay. The second layer was rock formed from old pyroclastic deposits, young volcanic rocks, sediments, and lava located at a depth of 250 m to 1800 m. These two layers were assumed to be cap rock. The third layer was interpreted as old volcanic rock consisting of andesitic lava rock and clay alteration at a depth of 1200 to 3800 m. The fourth layer at a depth of more than 3800 m was composed of rhyolitic igneous rocks and metamorphic rocks. This layer was identified as a layer that was a source of heat or hot rock which has continuity with the magma of Mount Talang. [ABSTRACT FROM AUTHOR]

Longitudinal data consists of repeated observations made from time to time on each individual. The correlation between observations within the same unit in longitudinal data makes the Generalized Linear Mixed Model (GLMM) an appropriate method for the analysis of longitudinal data. GLMM will not have a good estimation if the data contains missing values. To solve this problem, the imputation method is used. This paper discusses two imputation methods, namely mean and median row. The missing value is filled with the average or median value of all the values in the subject. It is known that poverty cases in districts/cities in Eastern Indonesia contain the missing value. Thus, poverty cases in these areas can be used as case studies of the data used. The purpose of the study is to form a GLMM model longitudinal with the Poisson response variable on poverty data in Eastern Indonesia to obtain factors that positively and negatively affect poverty in eastern Indonesia and obtain the right method of median row and mean row in the imputation methods to handle missing values based on the AIC value of the resulting estimate using GLMM. A mean row method is recommended to impute the missing values in Longitudinal data of poverty cases in Eastern Indonesia's districts/cities. [ABSTRACT FROM AUTHOR]

Due to operational and safety reason the gas obtained from the oil production generally will be burned into gas flare. Furthermore, elimination of gas flaring is a significant and essential step toward ensuring that significant natural resources are not wasted and mitigating climate change. In 2015, a program called Zero Routine Flaring (ZRF) initiated by the World Bank is targeting by 2030. The ZRF program is managed by Global Gas Flaring Reduction (GGFR) and obligates oil corporations and governments to put an end to recurring flare-ups by 2030. Based on the volume of routine gas flaring, current state of flaring gas is 162 MMSCFD. With this number, Indonesia ranks 16th worldwide [1]. The objective of this paper is to review the Indonesian government's regulation of routine gas flares due to the World Bank's initiative about ZRF by 2030. The fact shows that the Indonesian government has issued regulations related to gas flare management through the Minister of Energy and Mineral Resources Regulation No. 17 year 2021 [2] and Minister of Energy and Mineral Resources Regulation No. 30 year 2021 [3]. A review of those regulations has been done. Along with the regulations, Oil and Gas companies in Indonesia are also making efforts to reduce routine gas flares, for example, by utilizing gas flares as boiler and gas turbine fuel. These actions successfully decreased Indonesian routine gas flares from 342 MMSCFD in 2012 to 162 MMSCFD in 2021. However, Indonesia's routine gas flares have not yet suited the criteria set by the Government of Indonesia. In conclusion, to achieve the ZRF targets by 2030, oil companies and the Governments, must assist each other in this journey. In addition, it is necessary to improve regulations and gas flare monitor programs and provide fines and incentives for companies that meet the gas flare criteria according to the regulation. [ABSTRACT FROM AUTHOR]

Indonesia has the largest geothermal potential in the world, recently Indonesia only utilizes 7% of their geothermal to generate electricity. To increase the electricity production, the development of new geothermal power plant is needed, also the optimization of existing geothermal power plant. There are several types of geothermal powerplant system, depends on steam condition and utilization. This paper aimed to analyze the heat loss occurred in geothermal powerplant system X, also compare the cooling system between direct contact condenser (DCC) and indirect contact condenser (ICC). The comparison study has been simulated by using ASPEN HYSIS software. The method used to analyze the heat loss was by calculating exergy in each stream, so that we can calculate the exergy destruction at each process equipment. The result shows that the turbine produced 60 MW of electricity and largest heat loss occur on cooling tower with percentage about 17.64% for ICC system and 18.41% for DCC. [ABSTRACT FROM AUTHOR]

Lowering Covid-19 cases globally and nationally provides a positive indication of economic growth, especially in Batam City, Indonesia. This condition is also followed by increased electrical energy consumption, particularly in residential houses. This paper presents an electrical energy audit process of a residential house using the IKE (Energy Consumption Intensity) parameter. The audit was conducted in a home with a building area of 226 m2 and an electrical capacity of 4400 VA. The result shows that the total electricity consumption of such a house is 1,266.34 kWh per month, to which the air-conditioning system contributed the most prominent electricity consumption of the whole facilities in the house. Providentially, the score of IKE is less than 8.5, which means such a residential house is categorized as very efficient energy consumption. Furthermore, the self-evaluating checklist technique has carried out to find the main factor that affects the electricity consumption of the air-conditioning system. Regarding the highest rating score on the self-evaluating checklist of air conditioning systems, the ceiling has a score of 77.5%. This result means that the ceiling needs to be evaluated to reduce the heat load of the house, which in turn reduces the electrical energy consumption of the air conditioning system. Finally, this work can use as an initial audit framework for assessing electrical energy consumption in residential houses in Indonesia. [ABSTRACT FROM AUTHOR]