Search

Climate change is a global issue that requires collective action to address. One of the most pressing concerns is reducing emissions resulting from combustion processes. The use of renewable energy sources and green energy has become a trend worldwide. Solar energy is one of the most promising sources due to its abundance and simplicity of implementation. The city of Aswan, located in the South of Egypt, has a high solar radiation that makes it ideal for utilizing solar power. The current study investigates the optimal design for a sustainable building electricity system at the Aswan Campus of the Arab Academy for Science, Technology & Maritime Transport (AASTMT) in Egypt. The campus has four electricity sources: a utility grid, PV panels, batteries, and a diesel generator, along with a weather station. Experimental investigations have been carried out in this research paper to study the performance characteristics of solar power. Moreover, HOMER pro software is used to model various configurations of the campus grid, including different photovoltaic (PV) panel types and tracking systems. The simulations are compared with real-world data collected from a weather station on campus. Additionally, CO2 and NO2 emissions are measured to assess the environmental impact of different scenarios. The total net cost over the life cycle is also calculated for different cases. The results demonstrate that the addition of a PV renewable system can reduce traditional grid usage by 38% and emissions by 50%. A decrease in the Levelized Cost of Energy (LOCE) from USD 0.0647 to USD 0.0535 is reported. Moreover, the difference in NCP cost between dual-axis tracking and fixed zero angle is USD 143,488. The dual degree tracker for PV panels can further enhance energy production by 30% more, compared with fixed panels, while reducing carbon dioxide emissions by more than 20%. The simulation results reveal that tracking systems provide greater energy generation, and that a cost–benefit analysis may prioritize fixed panels in some cases. The results from the HOMER software simulations closely match those of the experimental data, which is that the total presentation error does not exceed 8%, demonstrating the software's effectiveness for optimizing renewable energy systems. This study demonstrates that a comprehensive analysis and optimization of a building's energy sources can significantly reduce costs, lower emissions, and promote the use of renewable energy, particularly solar power. [ABSTRACT FROM AUTHOR]

Multiphase drives exhibit remarkable advantages (e.g., fault tolerance) over three-phase ones. Six-phase drives are particularly attractive, given their moderate complexity and suitability for off-the-shelf three-phase converters. Regarding the stator winding arrangement, the symmetrical one offers superior postfault capabilities in most scenarios. On the other hand, resistance asymmetry in the stator phases or connections may arise due to different causes. The conventional full-range minimum-loss strategy (FRMLS) generates stator-current references under open-phase (infinite resistance) faults so that torque ripple is prevented while minimizing the losses for each torque ($\boldsymbol{d}$ - $\boldsymbol{q}$ current) value and maximizing the torque range; however, this method is unsuitable for unequal resistances of finite value. This article proposes an FRMLS for setting the current references to reach these goals in symmetrical six-phase drives with any resistance asymmetry. The optimum references are found online depending on the resistances, without lookup tables. The phase currents are individually limited by an iterative algorithm, so that minimum stator copper loss (SCL) is achieved over the maximum admissible torque range. In this manner, unlike the conventional FRMLS, minimum SCL and maximum torque range are attained even for finite resistance imbalance. The currents in phases affected by high resistances are suitably reduced. Experimental results are provided. [ABSTRACT FROM AUTHOR]

The steady-state modeling of multiphase induction machines (IMs) with m phases under open-line fault conditions is usually carried out based on symmetrical component theory. Hence, the estimation of the machine characteristic curves usually involves complex mathematical calculations and inversion of high-order matrices, which complicates the analysis. Moreover, the effect of the different subspaces’ impedances on the machine performance cannot be easily recognized using this modeling technique. Instead, this paper presents the first attempt to derive a simple equivalent circuit for a five-phase IM under open-line conditions that includes the effect of all subspaces in a single circuit. The derivation is carried out for both star and pentagon connections. The equivalent circuit can be a simple technique to explain the advantages obtained from a pentagon connection compared to the star connection under open-circuit faults. It can also be used to derive a simple expression for torque gain and torque ripple magnitude for different stator connections based on the circuit parameters. The derived equivalent circuits are verified using a 1-kW five-phase prototype machine. [ABSTRACT FROM PUBLISHER]