Search

Swelling of Brodie graphite oxide (B-GO) was studied for a series of normal alcohols from methanol to 1-nonanol. Isopiestic, X-ray diffraction (XRD), thermogravimetric, and differential scanning calorimetry data demonstrated that sorption of polar liquids into GO lamellas formed the set of regular swollen structures, simple binary “solid solvates”, characterized by the distance between the GO planes and the value of sorption. Temperature–composition behavior of the swollen structures was adequately described by conventional binary phase diagrams. Phase transformation of the low-temperature swollen structure of B-GO with 1-nonanol gave a clear example of incongruent melting transition typical for the binary solvates. A discreet set of the interplane distances observed by XRD and the stepwise equilibrium desorption pointed to the layered arrangement of solvent molecules in the swollen structures. The swollen structures with one to five parallel layers were observed for a series of normal alcohols with B-GO. The average volume of one layer, 0.36 ± 0.06 cm3 g–1 B-GO, was almost the same for rather different organic liquids and was possibly restricted by the internal geometry of B-GO. This internal volume available for the sorption of the first layer was reasonably estimated from geometrical parameters of B-GO.

In this article, it is shown that by exposing commonly used lipids for biomembrane mimicking studies, to a solution containing the histidine-rich intrinsically disordered protein histatin 5, a protein cushion spontaneously forms underneath the bilayer. The underlying mechanism is attributed to have an electrostatic origin, and it is hypothesized that the observed behavior is due to proton charge fluctuations promoting attractive electrostatic interactions between the positively charged proteins and the anionic surfaces, with concomitant counterion release. Hence, we anticipate that this novel "green" approach of forming cushioned bilayers can be an important tool to mimic the cell membrane without the disturbance of the solid substrate, thereby achieving a further understanding of protein-cell interactions.

Intercalation of dyes into thin multilayered graphene oxide (GO) films was studied by neutron reflectivity and X-ray diffraction. Methylene blue (MB) penetrates the interlayer space of GO in ethanol solution and remains intercalated after the solvent evaporation, as revealed by the expansion of the interlayer lattice and change in chemical composition. The sorption of MB by thin GO films is found to be significantly stronger compared to the sorption of Crystal violet (CV) and Rose bengal (RB). This effect is attributed to the difference in the geometrical shape of planar MB and essentially nonflat CV and RB molecules. Graphite oxides and restacked GO films are found to exhibit different methylene blue (MB) sorptions. MB sorption by precursor graphite oxide and thin spin-coated films of GO is significantly stronger compared to freestanding micrometer-thick membranes prepared by vacuum filtration. Nevertheless, the sorption capacity of GO membranes is sufficient to remove a significant part of the MB from diluted solutions tested for permeation in several earlier studies. High sorption capacity results in strong modification of the GO structure, which is likely to affect permeation properties of GO membranes. Therefore, MB is not suitable for testing size exclusion effects in the permeation of GO membranes. It is not only hydration or solvation diameter but also the exact geometrical shape of molecules that needs to be taken into account considering size effects for penetration of molecules between GO layers in membrane applications.

Hypothesis: Salivary pellicles i.e., thin films formed upon selective adsorption of saliva, protect oral surfaces against chemical and mechanical insults. Pellicles are also excellent aqueous lubricants. It is generally accepted that reconstituted pellicles have a two-layer structure, where the outer layer is mainly composed of MUC5B mucins. We hypothesized that by comparing the effect of ionic strength on reconstituted pellicles and MUC5B films we could gain further insight into the pellicle structure.\ud \ud Experiments: Salivary pellicles and MUC5B films reconstituted on solid surfaces were investigated at different ionic strengths by Force Spectroscopy, Quartz Crystal Microbalance with Dissipation, Null Ellipsometry and Neutron Reflectometry.\ud \ud Findings: Our results support the two-layer structure for reconstituted salivary pellicles. The outer layer swelled when ionic strength decreased, indicating a weak polyelectrolyte behavior. While initially the MUC5B films exhibited a similar tendency, this was followed by a drastic collapse indicating an interaction between exposed hydrophobic domains. This suggests that mucins in the pellicle outer layer form complexes with other salivary components that prevent this interaction. Lowering ionic strength below physiological values also led to a partial removal of the pellicle inner layer. Overall, our results highlight the importance that the interactions of mucins with other pellicle components play on their structure.

Permeation of multilayered graphene oxide (GO) membranes by polar solvents is known to correlate with their swelling properties and amount of sorbed solvent. However, quantitative estimation of sorption using standard (e.g., gravimetric) methods is technically challenging for few nanometers thick GO membranes/films exposed to solvent vapors. Neutron reflectivity (NR) was used here to evaluate the amount of solvents intercalated into the film which consists of only ∼31.5 layers of GO. Analysis of NR data recorded from the GO film exposed to vapors of polar solvents provides information about change of film thickness due to swelling, amount of intercalated solvent, and selectivity in sorption of solvents from binary mixtures. A quantitative study of GO film sorption was performed for D2O, d-methanol, ethanol, dimethyl sulfoxide (DMSO), acetonitrile, dimethylformamide (DMF), and acetone. Using isotopic contrast, we estimated selectivity in sorption of ethanol/d-methanol mixtures by the GO film. Estimation of sorption selectivity was also performed for D2O/DMF, D2O/DMSO, and D2O/acetonitrile binary mixtures. Sorption of polar solvents was compared for the thin GO film, micrometer thick free standing GO membranes, and graphite oxide powders.

Hydrogen sorption by reduced graphene oxides (r-GO) is not found to increase after decoration with Pd and Pt nanoparticles. Treatments of metal decorated samples using annealing under hydrogen or air were tested as a method to create additional pores by effects of r-GO etching around nanoparticles. Increase of Specific Surface Area (SSA) was observed for some air annealed r-GO samples. However, the same treatments applied to activated r-GO samples with microporous nature and higher surface area result in breakup of structure and dramatic decrease of SSA. Our experiments have not revealed effects which could be attributed to spillover in hydrogen sorption on Pd or Pt decorated graphene. However, we report irreversible chemisorption of hydrogen for some samples which can be mistakenly assigned to spillover if the experiments are incomplete.

Finding an abundant and cost-effective electrocatalyst for the hydrogen evolu-tion reaction (HER) is crucial for a global production of hydrogen from water electrolysis. This work reports an except ...

Swelling of Hummers graphene oxide (HGO) membranes in a set of progressively longer liquid alcohols (methanol to 1-nonanol) was studied using synchrotron radiation XRD after air ageing over prolonged periods of time. Both precursor graphite oxides and freshly prepared HGO membranes were found to swell in the whole set of nine liquid alcohols with an increase of interlayer spacing from approximate to 7 angstrom (solvent free) up to approximate to 26 angstrom (in 1-nonanol). A pronounced effect of ageing on swelling in alcohols was found for HGO membranes stored in air. The HGO membranes aged for 0.5-1.5 years show progressively slower swelling kinetics, a non-monotonic decrease of saturated swelling in some alcohols and complete disappearance of swelling for alcohol molecules larger than hexanol. Moreover, the HGO membranes stored under ambient conditions for 5 years showed a nearly complete absence of swelling in all alcohols but preserved swelling in water. In contrast, precursor graphite oxide powder showed unmodified swelling in alcohols even after 4 years of ageing. Since the swelling defines the size of permeation channels, the ageing effect is one of the important parameters which could explain the strong variation in reported filtration/separation properties of GO membranes. The time and conditions of air storage require standardization for better reproducibility of results related to performance of GO membranes in various applications. The ageing of GO membranes can be considered not only as a hindrance/degradation for certain applications, but also as a method to tune the swelling properties of HGO membranes for better selectivity in sorption of solvents and for achieving better selective permeability.

The most common methods to evaluate hydrogen sorption (volumetric and gravimetric) require significant experience and expensive equipment for providing reproducible results. Both methods allow one to measure excess uptake values which are used to calculate the total amount of hydrogen stored inside of a tank as required for applications. Here we propose an easy to use and inexpensive alternative approach which allows one to evaluate directly the weight of hydrogen inside a material-filled test tank. The weight of the same tank filled with compressed hydrogen in the absence of loaded material is used as a reference. We argue that the only parameter which is of importance for hydrogen storage applications is by how much the material improves the total weight of hydrogen inside of the given volume compared to compressed gas. This parameter which we propose to name Gain includes both volumetric and gravimetric characterization of the material; it can be determined directly without knowing the skeletal volume of the material or excess sorption. The feasibility of the Gravimetric Tank (GT) method was tested using several common carbon and Metal Organic Framework (MOF) materials. The best Gain value of ∼12% was found for the Cu-BTC MOF which means that the tank completely filled with this material stores a 12% higher amount of hydrogen compared to H2 gas at the same P-T conditions. The advantages of the GT method are its inexpensive design, extremely simple procedures and direct results in terms of tank capacity as required for industrial applications. The GT method could be proposed as a standard check for verification of the high hydrogen storage capacity of new materials. The GT method is expected to provide even better accuracy for evaluation of a material's performance for storage of denser gases like e.g. CO2 and CH4.

Solvothermal reaction of graphite oxide (GO) with benzene-1,4-diboronic acid (DBA) was reported previously to result in formation of graphene oxide framework (GOF) materials. The theoretical structure of GOFs consists of graphene layers separated by benzene-diboronic “pillars” with ∼1 nm slit pores thus providing the opportunity to use it as a model material to verify the effect of a small pore size on hydrogen adsorption. A set of samples with specific surface area (SSA) in the range of ∼50–1000 m2/g were prepared using variations of synthesis conditions and GO/DBA proportions. Hydrogen storage properties of GOF samples evaluated at 293 and 77 K were found to be similar to other nanocarbon trends in relation to SSA values. Structural characterization of GO/DBA samples showed all typical features reported as evidence for formation of a framework structure such as expanded interlayer distance, increased temperature of thermal exfoliation, typical features in FTIR spectra, etc. However, the samples also exh...

Hydrogen sorption properties of graphene-related materials were studied by gravimetric and volumetric methods at 2931< and 77K. Rapid thermal exfoliation of different types of graphite oxide (GO) precursors yielded samples with maximal surface areas up to 850 m(2)/g, whereas surface areas up to 2300 m(2)/g were achieved by post-exfoliation activation treatments. Therefore, hydrogen storage parameters of graphene materials could be evaluated in a broad range of surface areas. The H-2 uptake vs surface area trend revealed in this study shows that hydrogen storage by graphene materials do not exceed 1 Wt% at 120 Bar H-2 at ambient temperatures. Linear increase of hydrogen adsorption vs surface area was observed at 77 K with maximal observed value of similar to 5 Wt% for 2300 m(2)/g sample. It can be concluded that bulk graphene samples obtained using graphite oxide exfoliation and activation follow standard for other nanostructured carbons hydrogen uptake trends and do not demonstrate superior hydrogen storage parameters reported in several earlier studies. Nevertheless, graphene remains to be one of the best materials for physisorption of hydrogen, especially at low temperatures.

We performed a combined theoretical and experimental study of hydrogen adsorption in graphene systems with defect-induced additional porosity. It is demonstrated that perforation of graphene sheets results in increase of theoretically possible surface areas beyond the limits of ideal defect-free graphene (∼2700 m2/g) with the values approaching ∼5000 m2/g. This in turn implies promising hydrogen storage capacities up to 6.5 wt% at 77 K, estimated from classical Grand canonical Monte Carlo simulations. Hydrogen sorption was studied for the samples of defected graphene with surface area of ∼2900 m2/g prepared using exfoliation of graphite oxide followed by KOH activation. The BET surface area of studied samples thus exceeded the value of single-layered graphene. Hydrogen uptake measured at 77 K and 296 K amounts to 5.5 wt% (30 bar) and to 0.89 wt% (120 bar), respectively.

Improving interfacial contact between each component in the proton exchange membrane fuel cell (PEMFC) can lead to a significant increase in power density and Pt utilization. In this work, the junction between the catalyst layer and gas diffusion layer (GDL) is greatly enhanced through direct attachment of helical carbon nanofibers, giving rise to a hierarchical structure within the electrical interconnections. The alternative novel GDL is produced by spraying a thin layer of Pd2C60 precursor on commercial carbon paper, followed by chemical vapor deposition growth resulting in a surface morphology of well-attached nanofibers surrounding the microfibers present in the commercial carbon paper. Subsequent solvothermal deposition of platinum nanoparticles allowed evaluation of its suitability as gas diffusion electrode in cathodic H-2/O-2 PEMFC environment. A combination of lowered charge transfer resistance and enhanced Pt-utilization is attributed to its unique wire-like appearance and its robust properties. The fabricated microporous layer - free GDL is suitable for relatively aggressive membrane electrode assembly fabrication procedures and is produced by industrially favorable techniques, rendering it capable of efficiently supporting small amounts of precious metal catalyst nanoparticles in various PEM applications.

Graphite oxides (GO) are intercalated rapidly by one to several layers of solvent when immersed in liquid but the GO solvates are typically unstable on air due to solvent evaporation. Here we study swelling of GO in solvents (sugar alcohols) with melting temperature point above ambient. Using in situ synchrotron radiation XRD experiments we demonstrated GO swelling in molten xylitol and sorbitol. The expanded GO structure intercalated with one layer of xylitol or sorbitol is preserved upon solidification of melt and cooling back to ambient conditions. The structure of solid solvates of GO with xylitol and sorbitol is based on non-covalent interaction and pristine GO can be recovered by washing in water. Intercalation of xylitol and sorbitol into GO structure in aqueous solutions yields similar but less ordered structure of GO/sugar alcohol solid solvates. Very similar inter-layer distance was observed for GO intercalated by sugar alcohols in melt and for GO immersed in sugar solutions. This result shows that sugar alcohols penetrate into GO inter-layer space without hydration shell forming 2D layers with orientation parallel to graphene oxide sheets. Therefore, hydration diameter of molecules should not be considered as decisive factor for permeation through graphene oxide inter-layers in multilayered membranes.

Hybrid 2D-2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF-1 nanosheets (v-COF-GO). The hybrid material has a forest of COF-1 nanosheets with a thickness of 3 to 15 nm in edge-on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF-1 platelets parallel to the surface of GO. The v-COF-GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge-on orientation. It was demonstrated as a high-performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D-2D materials with control of their relative orientation.

Graphite oxide (GO) in liquid acetonitrile undergoes a transition from an ordered phase around ambient temperature to a gel-like disordered phase at temperatures below 260 K, as demonstrated by in situ X-ray diffraction. The stacking order of GO layers is restored below the freezing point of acetonitrile (199 K). The reversible swelling transition between a stacked crystalline phase and an amorphous delaminated state observed upon cooling provides an unusual example of increased structural disorder at lower temperatures. The formation of the gel-like phase is attributed to the thermo-responsive conformational change of individual GO flakes induced by stronger solvation. Scanning force microscopy demonstrates that GO flakes deposited onto a solid substrate from acetonitrile dispersions at a temperature below 260 K exhibit corrugations and wrinkling which are not observed for the flakes deposited at ambient temperature. The thermo-responsive transition between the delaminated and stacked phases reported here can be used for sonication-free dispersion of graphene oxide, micro-container applications, or the preparation of new composite materials.

Pro-inflammatory S100A9 protein is increasingly recognized as an important contributor to inflammation-related neurodegeneration. Here, we provide insights into S100A9 specific mechanisms of action in Alzheimer’s disease (AD). Due to its inherent amyloidogenicity S100A9 contributes to amyloid plaque formation together with Aβ. In traumatic brain injury (TBI) S100A9 itself rapidly forms amyloid plaques, which were reactive with oligomer-specific antibodies, but not with Aβ and amyloid fibrillar antibodies. They may serve as precursor-plaques for AD, implicating TBI as an AD risk factor. S100A9 was observed in some hippocampal and cortical neurons in TBI, AD and non-demented aging. In vitro S100A9 forms neurotoxic linear and annular amyloids resembling Aβ protofilaments. S100A9 amyloid cytotoxicity and native S100A9 pro-inflammatory signaling can be mitigated by its co-aggregation with Aβ, which results in a variety of micron-scale amyloid complexes. NMR and molecular docking demonstrated transient interactions between native S100A9 and Aβ. Thus, abundantly present in AD brain pro-inflammatory S100A9, possessing also intrinsic amyloidogenic properties and ability to modulate Aβ aggregation, can serve as a link between the AD amyloid and neuroinflammatory cascades and as a prospective therapeutic target. Electronic supplementary material The online version of this article (doi:10.1007/s00401-013-1208-4) contains supplementary material, which is available to authorized users.

Porous pillared graphene oxide (GO) materials were prepared using solvothermal reaction of Hummers GO with solution of Tetrakis(4-aminophenyl)methane (TKAm) in methanol. The intercalation of TKAm molecules between individual GO sheets, performed under swelling condition, results in expansion of inter-layer distance of GO from ∼7.5 Å to 13-14 Å. Pillaring GO with bulky, rigid 3D shaped TKAm molecules could be an advantage for the preparation of stable pillared structures compared to e.g. aliphatic or aromatic diamines. Insertion of TKAm molecules into inter-layer space of GO results in formation of interconnected network of sub-nanometer slit pores. The expanded GO structure prepared with optimized GO/TKAm composition shows Specific Surface Area (SSA) up to 660 m2/g which is among the highest reported for GO materials pillared using organic spacers. Modelling of GO structures pillared with TKAm molecules shows that maximal SSA of about 2300 m2/g is theoretically possible for realistic concentration of pillaring molecules in GO interlayers. Hydrogen sorption by pillared GO/TKAm is found to follow standard correlation with SSA both at ambient and liquid nitrogen temperatures with highest uptakes of 1.66 wt% achieved at 77 K and 0.25 wt% at 295 K. Our theoretical simulations show that pillared GO structures do not provide improvement of hydrogen storage beyond well-established physisorption trends even for idealized materials with subnanometer pores and SSA of 2300–3700 m2/g.

Multilayered intercalation of 1-octanol into the structure of Brodie graphite oxide (B-GO) was studied as a function of temperature and pressure. Reversible phase transition with the addition/removal of one layer of 1-octanol was found at 265 K by means of X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC). The same transition was observed at ambient temperature upon a pressure increase above 0.6 GPa. This transition was interpreted as an incongruent melting of the low temperature/high pressure B-GO intercalated structure with five layers of 1-octanol parallel to GO sheets (L-solvate), resulting in the formation of a four-layered structure that is stable under ambient conditions (A-solvate). Vacuum heating allows the removal of 1-octanol from the A-solvate layer by layer, while distinct sets of (00l) reflections are observed for three-, two-, and one-layered solvate phases. Step by step removal of the 1-octanol layers results in changes of distance between graphene oxide planes by ∼4.5 Å. This experiment proved that both L- and A-solvates are structures with layers of 1-octanol parallel to GO planes. Unusual intercalation with up to five distinct layers of 1-octanol is remarkably different from the behaviour of small alcohol molecules (methanol and ethanol), which intercalate B-GO structure with only one layer under ambient conditions and a maximum of two layers at lower temperatures or higher pressures. The data presented in this study make it possible to rule out a change in the orientation of alcohol molecules from parallel to perpendicular to the GO planes, as suggested in the 1960s to explain larger expansion of the GO lattice due to swelling with larger alcohols.

Comment on "Nanohole-Structured and Palladium-Embedded 3D Porous Graphene for Ultrahigh Hydrogen Storage and CO Oxidation Multifunctionalities"

The change of distance between individual graphene oxide sheets due to swelling is the key parameter to explain and predict permeation of multilayered graphene oxide (GO) membranes by various solvents and solutions. In situ synchrotron X-ray diffraction study shows that swelling properties of GO membranes are distinctly different compared to precursor graphite oxide powder samples. Intercalation of liquid dioxolane, acetonitrile, acetone, and chloroform into the GO membrane structure occurs with maximum one monolayer insertion (Type I), in contrast with insertion of 2-3 layers of these solvents into the graphite oxide structure. However, the structure of GO membranes expands in liquid DMSO and DMF solvents similarly to precursor graphite oxide (Type II). It can be expected that Type II solvents will permeate GO membranes significantly faster compared to Type I solvents. The membranes are found to be stable in aqueous solutions of acidic and neutral salts, but dissolve slowly in some basic solutions of certain concentrations, e.g. in NaOH, NaHCO3 and LiF. Some larger organic molecules, alkylamines and alkylammonium cations are found to intercalate and expand the lattice of GO membranes significantly, e.g. up to ∼35 A in octadecylamine/methanol solution. Intercalation of solutes into the GO structure is one of the limiting factors for nano-filtration of certain molecules but it also allows modification of the inter-layer distance of GO membranes and tuning of their permeation properties. For example, GO membranes functionalized with alkylammonium cations are hydrophobized and they swell in non-polar solvents.

Using an optimized KOH activation procedure we prepared highly porous graphene scaffold materials with SSA values up to 3400 m(2) g(-1) and a pore volume up to 2.2 cm(3) g(-1), which are among the highest for carbon materials. Hydrogen uptake of activated graphene samples was evaluated in a broad temperature interval (77-296 K). After additional activation by hydrogen annealing the maximal excess H2 uptake of 7.5 wt% was obtained at 77 K. A hydrogen storage value as high as 4 wt% was observed already at 193 K (120 bar H2), a temperature of solid CO2, which can be easily maintained using common industrial refrigeration methods.

Complexes of e quine l ysozyme with o leic a cid (ELOA) belong to the group of proteinaceous complexes with oleic acid, among which ‘human α-lactalbumin made lethal to tumor cells’ (HAMLET) was the first to be discovered and is the most well known. The major functional feature of these complexes is their newly acquired cytotoxicity, which is absent in the original protein molecules; this indicates that the interaction of these proteins with oleic acid can create a new functionality. Modern single molecule–single cell techniques, such as atomic force microscopy, fluorescent correlation spectroscopy and confocal microscopy, together with other biophysical and biochemical methods, can provide a powerful insight into the molecular mechanisms of the ELOA interactions with cells and, in particular, how the cell membrane is targeted. HAMLET-type complexes have significant therapeutic potential in combating cancers, hence, understanding their molecular interactions with cells will help us to use them under a variety of in vivo conditions for the elimination of specific, unwanted cells.

The online version of the original article can be found under doi:10.1007/s00401-013-1208-4.