280 results on '"Hieda, Junko"'
Search Results
2. Relationships between surface energy and charge of surface-modified titanium and HAp formation
3. Effect of Si incorporation on corrosion resistance of hydrogenated amorphous carbon film
4. Preparation of Titanium–Calcium Alloy Films and Evaluation of Hydroxyapatite Formation Ability
5. Deformation Induced Changeable Young’s Modulus in Ternary Ti-Cr-O Alloys for Spinal Fixation Applications
6. Mechanical Properties of Ti-12Cr Alloy with Self-Tunable Young’s Modulus for Use in Spinal Fixation Devices
7. Microstructural Control and Mechanical Properties of Low-Cost Titanium Alloys for Next Generation Aircrafts
8. Mechanical Properties of Low-Cost Beta-Type Ti-Mn Alloys Fabricated by Metal Injection Molding
9. Difference of Wear Behavior Between Ti-29Nb-13Ta-4.6Zr Alloy and Ti-6A1–4V Eli Alloy for Biomedical Applications
10. Endurance of Low-Modulus β-Type Titanium Alloys for Spinal Fixation
11. Fatigue Characteristics and Microstructures of Laser-and Non-Laser Welded Low-Cost Ti-4.5Al-2.5Cr-1.2Fe-0.1C for Use in Next Generation Aircrafts
12. Mechanical Properties of Biomedical ß-Type Titanium Alloy with Rare-Earth Metal Oxide Particles Formed by Rare-Earth Metal Addition
13. (Invited) Efficient Carbon Sulfonation Using Plasma in Contact with Dilute Sulfuric Acid
14. In vitro biocompatibility of Ti–Mg alloys fabricated by direct current magnetron sputtering
15. Dependence of ion concentration in simulated body fluid on apatite precipitation on titania surface
16. Hardening behavior after high-temperature solution treatment of Ag–20Pd–12Au–xCu alloys with different Cu contents for dental prosthetic restorations
17. Changeable Young’s modulus with large elongation-to-failure in β-type titanium alloys for spinal fixation applications
18. Bending springback behavior related to deformation-induced phase transformations in Ti–12Cr and Ti–29Nb–13Ta–4.6Zr alloys for spinal fixation applications
19. Contribution of β′ and β precipitates to hardening in as-solutionized Ag–20Pd–12Au–14.5Cu alloys for dental prosthesis applications
20. Precipitation of β′ phase and hardening in dental-casting Ag–20Pd–12Au–14.5Cu alloys subjected to aging treatments
21. Adhesive strength of medical polymer on anodic oxide nanostructures fabricated on biomedical β-type titanium alloy
22. Deformation-induced changeable Young's modulus with high strength in β-type Ti–Cr–O alloys for spinal fixture
23. Reduction in anisotropy of mechanical properties of coilable (α+β)-type titanium alloy thin sheet through simple heat treatment for use in next-generation aircraft applications
24. Measurement of radicals generated by plasma in contact with dilute sulfuric acid by using electron spin resonance (ESR) method
25. Experimental study of the plasma chemistry in atmospheric pressure plasma contacts with dilute sulfuric acid
26. Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6Zr alloy by Cr addition
27. Enhancement of adhesive strength of hydroxyapatite films on Ti–29Nb–13Ta–4.6Zr by surface morphology control
28. Development of new metallic alloys for biomedical applications
29. Optimization of Cr content of metastable β-type Ti–Cr alloys with changeable Young’s modulus for spinal fixation applications
30. Development of thermo-mechanical processing for fabricating highly durable [formula omitted]-type Ti–Nb–Ta–Zr rod for use in spinal fixation devices
31. Beta type Ti–Mo alloys with changeable Young’s modulus for spinal fixation applications
32. Formation of L10-type ordered β′ phase in as-solutionized dental Ag–Pd–Au–Cu alloys and hardening behavior
33. Effect of terminal functional groups of silane layers on adhesive strength between biomedical Ti-29Nb-13Ta-4.6Zr alloy and segment polyurethanes
34. Investigation of plasma sulfonation mechanism with dilute sulfuric acid
35. Investigation of the sulfonation mechanism by gas–liquid interfacial plasma under atmospheric pressure conditions
36. Corrosion resistance and chemical stability of super-hydrophobic film deposited on magnesium alloy AZ31 by microwave plasma-enhanced chemical vapor deposition
37. Reaction kinetics of sulfate ion radicals in sulfuric acid investigated by electron spin resonance method
38. Gas-Phase Analysis by FTIR Spectrometry for Plasma with Dilute H2SO4 Solution
39. Optical emission spectroscopy as a diagnostic for plasmas in gas-liquids interface: improve carbon sulfonation
40. Fastest Formation Routes of Nanocarbons in Solution Plasma Processes
41. Synthesis process of gold nanoparticles in solution plasma
42. Mechanical Properties, Microstructures, and Biocompatibility of Low-Cost β-Type Ti-Mn Alloys for Biomedical Applications
43. Report on the 167th Seminar of Division of Sputtering and Plasma Processes
44. Wettability characterization of transparent MgF2 nanoparticle coatings with SiO2 binder covered with fluoroalkylsilane self-assembled monolayers
45. Size-regulated gold nanoparticles fabricated by a discharge in reverse micelle solutions
46. Difference of Wear Behavior between Ti-29Nb-13Ta-4.6Zr Alloy and Ti-6Al-4V ELI Alloy for Biomedical Applications
47. Fatigue Characteristics and Microstructures of Laser- and Non-Laser Welded Low-Cost Ti-4.5Al-2.5Cr-1.2Fe-0.1C for Use in Next Generation Aircrafts
48. Mechanical Properties of Biomedical ß-Type Titanium Alloy with Rare-Earth Metal Oxide Particles Formed by Rare-Earth Metal Addition
49. Endurance of Low-Modulus β-Type Titanium Alloys for Spinal Fixation
50. Mechanical Properties of Ti-12Cr Alloy with Self-Tunable Young's Modulus for Use in Spinal Fixation Devices
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.