Search

We present here the comparison of three mass spectrometric techniques coupled to gas chromatography for the speciation of Hg in complex matrices in order to evaluate the limiting factors for providing accurate and precise quantification results.

We evaluate here different analytical strategies for the chromatographic separation and determination of N-acetyl-5-methoxytryptamine (MEL) and its oxidative metabolites N1-acetyl-N2-formyl-5-methoxykynuramine (AFMK), N1-acetyl-5-methoxykynuramine (AMK) and cyclic 3-hydroxymelatonin (c3OHM) in cell culture samples. Two dimensional liquid chromatography (2D-LC) in the multiple heart-cutting mode was compared with regular 1D chromatographic separations of MEL and its oxidative metabolites. Our results showed that the use of trifluoroacetic acid (TFA) as mobile phase modifier was required to obtain a satisfactory resolution and peak shapes particularly for c3OHM. As TFA is not compatible with ESI ionization the application of the MHC mode was mandatory for a proper chromatographic separation. We evaluate also different internal standardization approaches based on the combined use of a surrogate standard (5-methoxytryptophol) and an internal standard (6-methoxytryptamine) for MEL quantification in cell culture samples obtaining unsatisfactory results both by 1D- and 2D-LC-ESI-MS/MS (from 9 ± 2 to 186 ± 38%). We demonstrate that only the application of isotope dilution Mass Spectrometry through the use of an in house synthesized

Spanish Ministry of Science and Innovation through Project [PGC2018-097961-B-I00]

We evaluate here the combination of two-dimensional liquid chromatography (2D-LC) in the multiple heart cutting mode and isotope dilution tandem mass spectrometry for the direct analysis of tryptic digests of serum samples. As a proof of concept, we attempt the quantification of proteotypic peptides of Apolipoprotein AIV (APOA4), Complement C3 (C3) and Vitronectin (VTN) which have been previously identified as potential candidate biomarkers of glaucoma. Using this 2D-LC strategy, analyte enrichment steps are avoided and the sample preparation involved after enzymatic digestion amounted to a simple centrifugation, evaporation of the supernatant and reconstitution in the 1D mobile phase. A mobile phase not compatible with the ESI source (10 mM KH2PO4 at pH 2.7) was used in the first dimension as it provided a satisfactory chromatographic resolution of the peptides and a high buffering capacity avoiding changes in retention times when analyzing complex matrices like human serum. We also demonstrate that using coeluting labelled analogues of the target peptides, protein concentrations were not affected by slight retention time shifts affecting the amount of target peptides transferred to the second dimension. Satisfactory results were obtained when analyzing fortified serum samples (recoveries from 98 to 113%). Precisions in the range of 1–9% RSD were obtained when replicating the analysis of a pooled serum sample. The comparative analysis of serum samples from n = 94 control subjects and n = 91 patients diagnosed with primary open-angle glaucoma did not show significant differences in the APOA4, VTN and C3 concentrations in contrast with previous studies using immunoassays.

A procedure for the determination of Pb isotope ratios by coupling liquid chromatography to a multicollector ICP-MS has been developed. The procedure allows the direct injection of samples after dissolution without resorting to time-consuming off-line separation procedures. The separation of Pb from concomitant elements is carried out by anionic exchange as ethylenediamine tetraacetic acid (EDTA) chelates using EDTA and ammonium nitrate as a mobile phase. A flow injection system allows the injection of NIST 981 Pb isotopic standard, before and after the Pb peak from the sample, and the on-line addition of Tl for mass bias correction and bracketing. The procedure was validated by injecting NIST 981 into the chromatographic system and by comparing the results for real samples with the classical off-line separation procedure using Pb spec resins. The optimised procedure was applied to archaeological samples containing different concentrations of Pb. It was observed that the only limitation to the accuracy of the procedure was the concentration of Pb in the samples as no preconcentration is performed. Solid archaeological samples containing at least 500 μg g−1 of Pb can be studied using the proposed procedure.

Dissolved inorganic carbon (DIC) is one of the most important parameters to be measured in seawaters for climate change studies. Its quantitative assessment requires analytical methodologies with overall uncertainties around 0.05% RSD for clear evaluation of temporal trends. Herein, two alternative isotope dilution mass spectrometry (IDMS) methodologies (online and species-specific) using an isotope ratio mass spectrometer (IRMS) and two calculation procedures for each methodology have been compared. As a result, a new method for the determination of DIC in seawaters, based on species-specific IDMS with isotope pattern deconvolution calculation, was developed and validated. A 13C-enriched bicarbonate tracer was added to the sample and, after equilibration and acidification, the isotope abundances at CO2 masses 44, 45, and 46 were measured on an IRMS instrument. Notably, early spiking allows correcting for evaporations and/or adsorptions during sample preparation and storage and could be carried out immediately after sampling. Full uncertainty budgets were calculated taking into account all the factors involved in the determination (initial weights, concentration and isotope abundances of standards, and final IRMS measurements). The average DIC value obtained for CRM seawater agreed very well with the certified value. Propagated precision obtained ranged from 0.035 to 0.050% RSD for individual sample triplicates. Reproducibility, assessed by three independent experiments carried out in different working days, was excellent as well (-0.01% and 0.057%, error and full combined uncertainty, respectively). Additionally, the approach proposed improves on established methods by simplicity, higher throughput (15 min per sample), and lower volume requirements (10 mL).

We have developed an analytical procedure to measure the carbon isotopic composition of multiple compounds even when there is a partial overlap in the chromatographic profiles and applied this procedure to measure the carbon isotopic composition of different metabolites in human urine and exhaled breath. Method development and validation was performed with CRM IAEA-600 caffeine after calibration of the reference CO

Although analysis of metals and metalloids, such as arsenic, is widely spread in many different fields, their analysis in gas and liquefied gas samples is still a challenge. A new GC-ICP-MS set up has been developed for their simultaneous total and speciation analysis in gas and liquefied gas samples without the need of a preconcentration step. An arsine in nitrogen standard was used for optimization and evaluation of the system. Good linearity and detection limits in the very low ppt level for both total and speciation analyses were found. Liquefied butane pressurized under nitrogen and doped with arsine and a propylene real sample from a cracker plant were analyzed using both external calibration and standard additions methods. The good match between both quantifying approaches demonstrated almost negligible matrix effects, even for the total analysis. Application of the approach to check repartition of volatile elements or species between gas and liquid phases was performed in the real propylene sample. Finally, its potential applicability for the simultaneous total and speciation analysis of other elements, such as Hg, was also proved.

Current procedures for the evaluation of spectral accuracy of mass spectrometers are limited by the lack of certified isotopic reference materials and the high uncertainty in the isotopic composition of natural abundance molecules. The calculated uncertainties in the ratio M + 1/M for natural abundance molecules containing any number of C, H, N and/or O atoms are close to 5% relative because of the natural variability of the isotopic composition of carbon. So, we have developed two alternative measurement procedures with much lower theoretical uncertainties for a better evaluation of spectral accuracy in both single and triple quadrupole analysers. The first method is based on the measurement of the M + 2/M, M + 4/M + 2, etc. ratios for halogenated organic compounds containing either Cl or Br. The theoretical uncertainties for these ratios because of natural variability are in the order of 0.3 to 1.0% making them suitable for the evaluation of spectral accuracy with the additional advantage that there is no need to take into account other limitations such as cluster purity or poor mass resolution. This procedure was applied to the evaluation of a single quadrupole GC-MS instruments using natural abundance PCB and PBDE standards with satisfactory results. The second method can be applied to tandem instruments and takes advantage of the loss of two halogen atoms when PCB and PBDE standards are fragmented by Collision Induced Dissociation. Theoretical SRM transition ratios can be calculated as a pure combinatorial probability with theoretical uncertainties lower than 0.1%. By combining PCBs and PBDEs with different number of halogen atoms, a mass range from 100 to 700 u and abundance ratios from 0.1 to 10 can be evaluated. The use of penta-chlorinated PCBs and/or penta-brominated PBDEs is finally recommended for the evaluation of spectral accuracy of mass spectrometers with the EI source. Copyright © 2016 John Wiley & Sons, Ltd.

We have developed a novel, rapid and easy calculation procedure for Mass Isotopomer Distribution Analysis based on multiple linear regression which allows the simultaneous calculation of the precursor pool enrichment and the fraction of newly synthesized labelled proteins (fractional synthesis) using linear algebra. To test this approach, we used the peptide RGGGLK as a model tryptic peptide containing three subunits of glycine. We selected glycine labelled in two 13 C atoms (13 C2 -glycine) as labelled amino acid to demonstrate that spectral overlap is not a problem in the proposed methodology. The developed methodology was tested first in vitro by changing the precursor pool enrichment from 10 to 40% of 13 C2 -glycine. Secondly, a simulated in vivo synthesis of proteins was designed by combining the natural abundance RGGGLK peptide and 10 or 20% 13 C2 -glycine at 1 : 1, 1 : 3 and 3 : 1 ratios. Precursor pool enrichments and fractional synthesis values were calculated with satisfactory precision and accuracy using a simple spreadsheet. This novel approach can provide a relatively rapid and easy means to measure protein turnover based on stable isotope tracers. Copyright © 2016 John Wiley & Sons, Ltd.

We have found clear evidence of direct adsorption of mercury in human hair after the occupational exposure to mercury vapour. We have performed both longitudinal analysis of human hair by laser ablation ICP-MS and speciation analysis by gas chromatography ICP-MS in single hair strands of 5 individuals which were occupationally exposed to high levels of mercury vapour and showed acute mercury poisoning symptoms. Hair samples, between 3.5 and 11 cm long depending on the individual, were taken ca. three months after exposure. Single point laser ablation samples of 50 μm diameter were taken at 1 mm intervals starting from the root of the hairs. Sulfur-34 was used as internal standard. The ratio 202Hg/34S showed a distinct pattern of mercury concentration with much lower levels of mercury near the root of the hair and high levels of mercury near the end of the hair. In all cases a big jump in the concentration of mercury in hair occurred at a given distance from the root, between 32 and 42 mm depending on the individual, with a high and almost constant concentration of mercury for longer distances to the root. When we took into account the rate of hair growth in humans, 9–15 mm/month, the jump in mercury concentration agreed approximately with the dates when the contamination occurred with the new growing hair showing much lower mercury concentration. In some cases the concentration of mercury at the tip of the hair was ca. 1000 times higher than that near the root. Additionally, speciation studies confirmed that mercury in all hair samples was present as inorganic mercury. The only explanation for these results was the direct adsorption of mercury vapour in hair at the time of exposure.

GC-FID has been effectively used as a universal quantification technique for volatile organic compounds for a long time. In most cases, the use of the ECN allows for quantification by GC-FID without external calibration using only the response of a single internal standard. In this paper we compare the performance characteristics of GC-FID with those of post-column (13)C Isotope Dilution GC-Combustion-MS for the absolute quantification of organic compounds without the need for individual standards. For this comparison we have selected the quantification of FAMEs in biodiesel. The selection of the right internal standard was critical for GC-FID even when ECN were considered. On the other hand, the nature of the internal standard was not relevant when GC-Combustion-MS was employed. The proposed method was validated with the analysis of the certified reference material SRM 2772 and comparative data was obtained on real biodiesel samples. The analysis of the SRM 2772 biodiesel provided recoveries in the range 100.6-103.5% and 96.4-103.6% for GC-combustion-MS and GC-FID, respectively. The detection limit for GC-combustion-MS was found to be 4.2ng compound/g of injected sample. In conclusion, the quantitative performance of GC-Combustion-MS compared satisfactorily with that of GC-FID constituting a viable alternative for the quantification of organic compounds without the need for individual standards.

This work presents the development of a methodology for the accurate and precise quantification of the renal biomarker Cystatin C in human urine by Isotope Dilution Mass Spectrometry (IDMS). The procedure is based on the addition of a known quantity of the proteotypic peptide ALDFAVG*EYNK labelled with 13C2-glycine to the urine sample followed by protein hydrolysis using trypsin. Then, preconcentration and purification of the isotope diluted peptide was carried out by a selective monoclonal antibody bound to magnetic beads and final measurement was done after injection of the sample in a HPLC-MS/MS triple quadrupole instrument. The isotopic distribution of the isotope diluted proteotypic peptide was measured by low resolution selected reaction monitoring. Using this aquisition mode, the bandpass of the first quadrupole was widened (FWHM =13 u) so the whole isotopic clusters for both the natural abundance and the labelled peptides entered the collision cell. The proposed acquisition mode provided similar accuracy and precision than the regular SRM mode (FWHM =0.7 u) but a higher sensitivity was observed. The purification of the sample by antibody based enrichment of the target peptide was shown to remove interfering compounds more efficiently in comparison with a sample purification based on semipreparative liquid chromatography. Using 5 ng of the labelled peptide it was possible to quantify Cystatin C in human urine in patients with normal and impaired renal function. Recoveries from 100 to 104% were obtained in samples containing from 90 to 700 μg L−1 of Cystatin C with relative standard deviations from 0.5 to 6%. The stability of Cystatin C in urine samples was evaluated under different storage conditions showing that only when the urine samples were stored at room temperature during more than 10 days, a significant degradation of Cystatin C was observed.

The spectral interference of 87Rb on 87Sr for the measurement of 87Sr/86Sr isotope ratios in solid samples by laser ablation multicollector (MC)-ICP-MS could be corrected by combining the transient signal of the sample with a Rb pulse from the nebulisation of a pure Rb standard. This dual sample introduction system, combined with a multiple linear regression data treatment procedure, allowed the interference free measurement of the 87Sr/86Sr isotope ratio in solid samples. Additionally, when the signals for Rb and Sr could be separated in time, even only partially, the application of the multiple linear regression procedure allowed us to compute also the 87Sr/86Sr isotope ratio free of spectral interference. The fact that Sr was concentrated in the seed coat of beans, whereas Rb was mainly present in the cotyledon, allowed us to develop a laser ablation multicollector ICP-MS procedure for the authentication of Asturian beans which are subject to fraud with the import of South American beans. By combining the 87Sr/86Sr isotope ratio with the 88Sr/85Rb elemental ratio we were able to distinguish between Asturian and South American beans in spite of the large 87Sr/86Sr isotopic variability of Asturian beans.

The degradation of butyltin compounds in surface water samples under different storage conditions has been studied. A triple spike solution, containing monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) labelled with a different tin isotope, was added to the sample to calculate the extent of the interconversion reactions among butyltin compounds. Real surface water samples (river water) were collected and stored in glass, polypropylene or polytetrafluoroethylene (PTFE) containers. The presence of light, addition of acetic acid, storage temperature (22, 4 or -18 °C), and the influence of a filtration step were evaluated. Moreover, Milli-Q water with and without the addition of a high concentration of humic acids was prepared in parallel and the results compared to those obtained from the real samples. The water samples were analysed by gas chromatography-tandem mass spectrometry (GC-MS/MS) in selected reaction monitoring (SRM) mode at two different storage times (2 weeks and 4 months after its preparation) to carry out both a short- and a long-term stability study. The lowest butyltin degradation was obtained when the samples were stored at -18 °C in the dark. Under these conditions, both TBT and DBT showed negligible dealkylation factors after 2 weeks. After 4 months, DBT dealkylation to MBT increased up to 19 % but TBT degradation was not observed.

This work describes the first application of 37Cl-labeled compounds to isotope dilution mass spectrometry (IDMS). The synthesis of 12 37Cl-labeled polychlorinated biphenyls (PCBs) was carried out by the chlorination of biphenyl with isotopically enriched chlorine gas, generated by the direct oxidation of Na37Cl with potassium peroxymonosulfate. After an exhaustive purification due to the presence of other congeners, the concentration and the isotopic enrichment of all 37Cl-labeled PCBs in the mixture was determined. The proposed procedure allows the simultaneous quantification of every isotope diluted PCB congener in a single gas chromatography-tandem mass spectrometry (GC-MS/MS) injection without resorting to a methodological calibration graph. The results obtained here demonstrate that the use of 37Cl-labeled analogues provides results in agreement with the certified values of three different Certified Reference Materials (marine sediment SRM 1944, fish tissue 1947, and loamy soil CRM 962-50) and analyt...

We propose a peptide-based isotope dilution mass spectrometry approach for Cystatin C determination in human serum samples, a clinical marker for renal status for which backup by a mass spectrometry based primary method has been missing so far. In contrast to common protocols, the isotope labelled version of the proteotypic signature peptide is designed such as keeping the isotopic difference as little as possible with respect to the peptide released from the protein. Peptides labelled in two 13C atoms are added to the serum samples just before proteolysis. After two steps of chromatographic purification the sample is measured by selected reaction monitoring using a LC–MS/MS. Resolution of the first quadrupole is reduced to transmit the whole parent ion cluster to the collision cell for monitoring accurate isotopic distributions of the molecular fragments. Molar fractions of labelled and natural abundance peptides are directly obtained from the experimental mass spectra of the in-cell fragment ions. Thus, the natural abundance protein concentration is obtained from the fragment-ion spectrum of the sample without resorting to extra calibration runs. Applicability of the approach is demonstrated by the measurement of the serum concentration of Cystatin C in Reference Material ERM R-DA471/IFCC and real samples. Biological significance Cystatin C is used as an alternative marker instead of, or in combination with creatinine for non-invasive determination of glomerular filtration rates. Advantages advocating in favour of Cystatin C in diagnosis of chronic kidney diseases are the lower variability of its serum level and, particularly, virtual independence on sex, age and muscle mass. However, in order to capitalize, accuracy of measurement has to be in proportion with the predictive power of the marker. Though there are label-free methods available for screening purposes or high-throughput analysis, achieving high levels of reliability and accuracy in quantitative proteomics takes reference to isotope labelled materials. Present routine assays (mainly nephelometry, turbidimetry and ligand-binding assays) are known to leave improvement to be desired in that respect. Absolute quantification based on enzymatic signature-peptides provides a method principle establishing traceability to the International System of Units on the level of primary methods. The kind of technique is capable, by this way, of high accuracy value-assignment to matrix materials needed for calibration of present routine assays, where not completely replacing them. Cystatin C measurement by isotope dilution mass spectrometry is developed in this study with the aim of making available this tool to support diagnostics of kidney function in the same way.

This work describes a methodology based on multiple linear regression and GC-MS for the determination of molar fractions of isotopically-labeled intracellular metabolites in cell cultures. Novel aspects of this work are: i) the calculation of theoretical isotopic distributions of the different isotopologues from an experimentally measured value of % 13C enrichment of the labeled precursor ii) the calculation of the contribution of lack of mass resolution of the mass spectrometer and different fragmentation mechanism such as the loss or gain of hydrogen atoms in the EI source to measure the purity of the selected cluster for each metabolite and iii) the validation of the methodology not only by the analysis of gravimetrically prepared mixtures of isotopologues but also by the comparison of the obtained molar fractions with experimental values obtained by GC-Combustion-IRMS based on 13C/12C isotope ratio measurements. The method is able to measure molar fractions for twenty-eight intracellular metabolites derived from glucose metabolism in cell cultures grown in the presence of 13C-labeled Glucose. The validation strategies demonstrate a satisfactory accuracy and precision of the proposed procedure. Also, our results show that the minimum value of 13C incorporation that can be accurately quantified is significantly influenced by the calculation of the spectral purity of the measured cluster and the number of 13C atoms of the labeled precursor. The proposed procedure was able to accurately quantify gravimetrically prepared mixtures of natural and labeled glucose molar fractions of 0.07% and mixtures of natural and labeled glycine at molar fractions down to 0.7%. The method was applied to initial studies of glucose metabolism of different prostate cancer cell lines.

Seven β2-agonist (clenproperol, clenbuterol, salbutamol, bronbuterol, ractopamine, clenpenterol and clencyclohexerol) were determined simultaneously in human and bovine urine by isotope dilution LC-ESI-MS/MS in a triple quadrupole instrument. The method is based on the application of multiple linear regression in combination with compound-specific minimally 13C-labelled analogues. Additionally, the increase of the bandpass of the first quadrupole during the selected reaction monitoring (SRM) measurement procedure allowed the simultaneous quantification of the seven compounds at sub ngg-1 levels in a single chromatogram without resorting to a methodological calibration graph. Recovery values at concentration levels between 5.0 and 0.05ngg-1 ranged from 95 to 110% in fortified bovine urine and from 91 to 108% in human urine, with relative standard deviations lower than 5% except for salbutamol and ractopamine. The proposed methodology was validated by analyzing the certified reference material BCR-503 (lyophilized bovine urine) certified for clenbuterol and salbutamol. The limits of detection (LOD) for a sample volume of 10mL of both human and bovine urine was found to be lower than 0.012ngg-1 for all compounds, except to salbutamol in bovine urine which was of 0.029ngg-1. The use of compound-specific isotopically labelled analogues minimally labelled in 13C minimized the occurrence of isotope effects and corrected for matrix effects during ESI ionization and can be efficiently applied for the quantification of ultra-trace concentrations of β2-agonists in human and bovine urine.

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.

A general method for the determination of the enrichment of isotopically labelled molecules by mass spectrometry (MS) is described. In contrast to other published procedures, the method described here takes into account and corrects for measurement errors such as the contribution at M - 1 due to loss of hydrogen or lack of spectral resolution and provides an uncertainty value for the determined enrichment. The general procedure requires the following steps: (1) evaluation of linearity in the mass spectrometer by injecting the natural abundance compound at different concentration levels, (2) determination of the purity of the mass cluster using the natural abundance analogue, (3) calculation of the theoretical isotope composition of the labelled compound using different tentative isotope enrichments, (4) calculation of 'convoluted' isotope distributions for the labelled compound taking into account the purity of the mass cluster determined with the natural abundance analogue and (5) comparison of the isotope distributions measured for the labelled compound with those calculated for different isotope enrichments using linear regression. The method was applied to a series of commercially available (13)C- and (2)H-labelled compounds and to a suite of singly (13)C-labelled β2-agonist prepared in-house both by gas chromatography (GC)-MS, GC-tandem MS (MS/MS) and liquid chromatography-MS/MS with satisfactory results. It was observed that the main uncertainty source for the isotope enrichment was the uncertainty in the purity of the measured cluster as determined with the natural abundance compound.

The accurate determination of creatinine in serum is essential for the diagnosis and treatment of kidney diseases. The determination of serum creatinine in clinical laboratories is routinely carried out by the Jaffe method or by enzymatic methods that may suffer from interferences. So, the development of reliable, fast and interference-free routine methods for complex serum samples is required. A fast method using isotope dilution mass spectrometry (IDMS) and gas chromatography mass spectrometry (GC–MS) was developed using minimally 13 C labeled creatinine analogs, multiple linear regression and rapid derivatization of creatinine with acetylacetone in 2 min by using focused microwave technology. The proposed method was validated with the analyses of two Certified Reference Materials (ERM-DA252a and ERM-DA253a) and compared with the Jaffe and enzymatic methods when analyzing real serum samples containing variable levels of bilirubin The proposed method is capable of providing accurate serum creatinine concentrations in less than 45 min from sample arrival to full data treatment and can be an alternative routine procedure for creatinine determinations in complex serum samples.

In this work, the implementation of isotope dilution mass spectrometry (IDMS) using minimal labeling and isotope pattern deconvolution (IPD) is evaluated as a strategy for the minimization of matrix effects during trace determination of β 2 -agonists in complex matrices by liquid chromatography electrospray ionization mass spectrometry (LC–ESI-MS). First, the parameters affecting the measurement of isotopic composition of organic compounds by liquid chromatography electrospray ionization high resolution mass spectrometry with a time-of-flight analyzer were evaluated using as a case of study three different β 2 -agonists: clenbuterol, clenproperol and brombuterol. Then, a calibration graph-free IDMS methodology was evaluated in order to overcome matrix effects in LC–ESI-MS in complex samples. In this procedure singly 13 C-labeled analogues of clenbuterol, clenproperol and brombuterol were employed in combination with IPD. Using this approach accurate and precise results were obtained in the simultaneous quantification of β 2 -agonists in human urine and bovine liver, even at the sub ng g −1 and particularly in spite of the previously reported matrix effects. Recovery rates in the range of 97–114% in fortified human urine and from 95% to 111% in fortified bovine liver were obtained with RSD (%) of independent recovery experiments always lower than 6%. These results demonstrate that the proposed methodology based on the use of 13 C 1 -labeled standards and IPD is a reliable approach for accurate LC–MS quantitation of small molecules and compatible with full-scan high-resolution mass spectrometry.

The monastery of San Andres de Arroyo (established in 1181) is one the best examples of Cistercian architecture in the Spanish region of Castilla y Leon. In this study, strontium isotope ratios were used to study the population of the recently excavated graveyard of this monastery. Twenty-nine individuals (of which 13 had preserved teeth) found in burials from the 13th and 14th centuries were subjected to analysis. Enamel 87Sr/86Sr ratio values obtained by using a multicollector ICP-MS instrument were used to distinguish between local and non-local individuals. Additionally, an anthropological study based on entheseal changes and other paleopathological conditions was carried out in all the exhumed individuals. This combined data allowed us to define the chemical and osteological diversity of a medieval Spanish monastery and its surrounding village. Among the usual profiles for a rural society, two individuals, both showing strong indications of being foreign to the area, were found to exhibit evidence of physical activities compatible with military training and activity. The present study can be considered as the first experimental indication that during the 13th and 14th centuries Spanish monasteries served as a last refuge for soldiers, which is compatible with historical records and previous indirect evidence.

We have developed a novel, rapid and easy calculation procedure for Mass Isotopomer Distribution Analysis based on multiple linear regression which allows the simultaneous calculation of the precursor pool enrichment and the fraction of newly synthesized labelled proteins (fractional synthesis) using linear algebra. To test this approach, we used the peptide RGGGLK as a model tryptic peptide containing three subunits of glycine. We selected glycine labelled in two

Biogas is growing as a suitable renewable energy source. One of biogas main drawbacks is the large number of impurities that it contains, because they cause technical, environmental, and also health problems. Nevertheless, no standard methods for sampling and analysis of key organic impurities in biogas are available. This article describes briefly the main sampling and analytic techniques used for the analysis of organic impurities in biogas. Then, the main methods available in the literature for the analysis of Si-containing compounds, S-containing compounds, hydrocarbons (alkanes, aromatic hydrocarbons, cycloalkanes, and terpenes), and oxygenated and halogenated hydrocarbons are summarized.

This study is focused on the El Milagro mine (Asturias, Spain) and is part of a large-scale effort on the measurement of the lead isotopic composition of Spanish copper ores from prehistoric mines in the provinces of Asturias and Leon, from which no data were available until recently. Lead isotopic values are compared to the published lead data from the El Aramo mine in the same region. The results show that both mines have a very similar lead isotopic composition, apart from some highly radiogenic samples in the El Milagro mine, which are clearly different from those previously reported for the Iberian Peninsula.

The present study evaluates the use of an individual-specific transgenerational barium dual-isotope procedure and its application to salmon specimens from the Sella River (Asturias, Spain). For such a purpose, the use of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) in combination with multiple linear regression for the determination of the isotopic mark in the otoliths of the specimens is presented. In this sense, a solution in which two barium-enriched isotopes ((137)Ba and (135)Ba) were mixed at a molar ratio of ca. 1:3 (N Ba137/N Ba135) was administered to eight returning females caught during the spawning period. After injection, these females, as well as their offspring, were reared in a governmental hatchery located in the council of Cangas de Onís (Asturias, Spain). For comparison purposes, as well as for a time-monitoring control, egg and larva data obtained by solution analysis ICP-MS are also given. Otoliths (9-month-old juveniles) of marked offspring were analysed by LA-ICP-MS demonstrating a 100 % marking efficacy of this methodology. The capabilities of the molar fraction approach for 2D imaging of fish otoliths are also addressed.

Sample preparation continues being a key factor to obtain fast and reliable quantification of Hg species. Assisted procedures enhance the efficiency and reduce the extraction time; however, collateral species transformations have been observed. Moreover, differential interconversions have been observed even between similar matrixes, which introduce an important uncertainty for real sample analysis. Trying to minimize Hg species transformations, we have tested a soft ultrasound-assisted extraction procedure. Species quantification and transformations have been evaluated using double spike isotope dilution analysis (IDA) together with gas chromatography inductively coupled plasma mass spectrometry (GC-ICP-MS) for a CRM material (Tort-2) and shark and swordfish muscle samples. Optimum extraction solution and sonication time led to quantitative extraction and accurate determination of MeHg and IHg in a short time, although different behaviors regarding species preservation were observed depending on the sample. Negligible species transformations were observed in the analysis of the CRM, while a small but significant demethylation factor was observed in the case of real samples. In comparison with other extraction procedures, species transformations became smaller, and fewer differences between fish species were found. Similar results were obtained for fresh and lyophilized samples of both fish samples, which permit one to analyze the fresh sample directly and save time in the sample preparation step. The high grade of species preservation and the affordability of the extraction procedure allow one to obtain accurate determinations even for routine laboratories using quantification techniques, which do not estimate species transformations.

The analytical methodology for the in vivo study of selenium metabolism using two enriched selenium isotopes has been modified, allowing for the internal correction of spectral interferences and mass bias both for total selenium and speciation analysis. The method is based on the combination of an already described dual-isotope procedure with a new data treatment strategy based on multiple linear regression. A metabolic enriched isotope ((77)Se) is given orally to the test subject and a second isotope ((74)Se) is employed for quantification. In our approach, all possible polyatomic interferences occurring in the measurement of the isotope composition of selenium by collision cell quadrupole ICP-MS are taken into account and their relative contribution calculated by multiple linear regression after minimisation of the residuals. As a result, all spectral interferences and mass bias are corrected internally allowing the fast and independent quantification of natural abundance selenium ((nat)Se) and enriched (77)Se. In this sense, the calculation of the tracer/tracee ratio in each sample is straightforward. The method has been applied to study the time-related tissue incorporation of (77)Se in male Wistar rats while maintaining the (nat)Se steady-state conditions. Additionally, metabolically relevant information such as selenoprotein synthesis and selenium elimination in urine could be studied using the proposed methodology. In this case, serum proteins were separated by affinity chromatography while reverse phase was employed for urine metabolites. In both cases, (74)Se was used as a post-column isotope dilution spike. The application of multiple linear regression to the whole chromatogram allowed us to calculate the contribution of bromine hydride, selenium hydride, argon polyatomics and mass bias on the observed selenium isotope patterns. By minimising the square sum of residuals for the whole chromatogram, internal correction of spectral interferences and mass bias could be accomplished. As a result, the tracer/tracee ratio could be calculated for each selenium-containing species and a time relationship for synthesis and degradation established. Both selenite and selenized yeast labelled with (77)Se were employed for comparative purposes.

A novel chemical tagging approach, based on a dual-isotope procedure, is presented. The method has been applied to explosives tagging. The method is based on the addition to the explosive of two enriched isotopes of the same element, which may be already present within it, at a given molar ratio. This dual-isotope approach will give a unique fingerprint to the tagged explosive. Further, the authentication of the tagged explosive or its residues will be obtained by comparison of the ratio of molar fractions experimentally measured by inductively coupled plasma mass spectrometry (ICP-MS) with the molar fraction ratio of the tagging mixture. The novelty of this tagging method relies on working with isotope abundances and molar fraction ratios instead of the classical isotope ratios, and this fact constitutes the strong point of the described approach since the molar ratio is not affected by physical, chemical, or biochemical processes, and it is also not disturbed by environmental contamination with the natural abundance element. Furthermore, the use of molar fraction ratios overcomes the nonhomogeneous distribution of the tagging element within the explosive. As the tagging element can be present at trace or ultratrace levels, a very small amount of enriched isotopes needs to be added, denoting a low cost solution. Also, the use of enriched stable isotopes of nontoxic elements will have negligible health effects or affect the environment.

A mixture of (81)Br-labeled polybrominated diphenyl ethers (PBDEs), previously synthesized in our laboratory, was separated by liquid chromatography for the individual isolation of different (81)Br-labeled PBDEs containing from 3 to 6 bromine atoms. The different fractions were collected, and a mixed labeled standard was then prepared adequate for the determination of priority PBDEs (congeners 28, 47, 99, 100, 153, and 154) in environmental samples. The spike mixture was then characterized using gas chromatography(electron ionization)MS (GC(EI)MS) both in isotope composition and concentration in combination with multiple least-squares. Contamination from natural abundance BDEs 153 and 154 was detected in the spike mixture, and a new isotope dilution equation was developed to take into account the natural abundance contribution from the spike. The spike mixture was shown to be stable during at least 4 months, and no isotope exchange between natural abundance and labeled PBDEs was detected during this period of time. Finally, the (81)Br-labeled PBDEs standard was used for the determination of congeners 28 (+33), 47, 49, 99, 100, 153, and 154 in a standard reference material (Lake Michigan fish tissue SRM 1947) using three different sample to spike ratios. No methodological calibration needed to be prepared, as no isotopic effects were detected using this labeling mode. Concentrations found were in agreement with the certified concentrations (recoveries between 89% and 116%), and reproducibility was always below 7% RSD. Kragten procedure was used to calculate expanded uncertainties. Very low limits of detection were obtained for all compounds (between 0.02 and 0.9 ng·g(-1)) using the procedure developed here.

A gas chromatography electron capture negative ionization mass spectrometry (GC(ECNI)MS) procedure for the determination of priority polybrominated diphenyl ethers (PBDEs; congeners 28, 47, 99, 100, 153 and 154) in water samples at regulatory EU levels has been developed. The method is based on the use of (81)Br-labelled PBDEs for isotope dilution analysis and the measurement of (79)Br/(81)Br isotope ratios in gas chromatography peaks with the electron capture negative ionization technique. The suitability of this ion source for the precise and accurate measurement of bromine isotope ratios has been demonstrated. The general ECNI-IDMS procedure was evaluated by the analysis of NIST SRM 1947 (Lake Michigan fish tissue) with satisfactory results. For the analysis of water samples, 500 mL of the samples were spiked with the labelled PBDEs and extracted with 10 mL isooctane for 30 min. The extract was evaporated down to ca. 100 μL and injected in the GC(ECNI)MS. Detection limits ranged from 0.014 (-1) to 0.089 pg mL(-1) depending on the congener. Recoveries from real water samples, spiked at a level of 0.5 pg mL(-1), ranged from 77% to 102%.

BACKGROUND: During the last decade, environmental concerns regarding the use of recalcitrant synthetic chelates to overcome iron chlorosis has increased and new ligands such as lignosulfonates (LS) have been evaluated. However, the efficacy of these products is variable. In this work a hardwood (eucalyptus) and softwood (spruce) LS were compared to try to relate their physico-chemical characteristics and their efficacy. Also two more products derived from the eucalyptus lignosulfonate were tested. RESULTS: All the LS tested presented a good ability to complex Fe, but only the spruce LS was capable to maintain significant amounts of soluble Fe above pH 8. According to the FTIR data, structural changes related to the Fe source (Fe2+ or Fe3+) used to form the complex occurred in the LS molecule and might influence their efficacy. Cucumber (Cucumis sativus L. cv Ashley) chlorotic plants were used to test lignosulfonate efficacy when applied through foliar sprays in comparison with FeSO4 and EDTA/57Fe3+. The 57Fe content of plants sprayed with LS was very low in respect to the EDTA treatment, but this was not reflected in the biomass and re-greening rates. Eucalyptus LS modifications improve its efficacy for iron chlorosis recovery to levels similar to those found for the spruce LS. Two applications of the LS are recommended. CONCLUSIONS: Lignosulfonates did not require surfactants for their application; they did not burn the leaves, and had a stimulating effect on the vegetative growth of the plants. So these by-products could be a good alternative when applied through foliar sprays for cucumber plants. Copyright © 2010 Society of Chemical Industry

A quadrupole GC-MS instrument with an electron ionization (EI) source has been modified to enable application of postcolumn isotope dilution analysis for the standardless quantification of organic compounds injected in the gas chromatograph. Instrumental modifications included the quantitative conversion of the separated compounds into CO(2), using a postcolumn combustion furnace, and the subsequent mixing of the gas with a constant flow of (13)CO(2) diluted in helium. The online measurement of the (12)CO(2)/(13)CO(2) (44/45) ratio in the EI-MS allowed us to obtain quantitative data without resorting to compound-specific standards. Validation of the procedure involved the analysis of standard solutions containing different families of organic compounds (C(9)-C(20) linear hydrocarbons, BTEX and esters) obtaining satisfactory results in all cases in terms of absolute errors (6%) and precision (4% RSD). The developed procedure showed excellent linearity over the range assayed (2 orders of magnitude) and adequate detection limits for carbon containing compounds (0.8 pg C s(-1)). The generic value of this compound-independent calibration approach was assessed by studying the quantitative performance of Head Space-Solid Phase Microextraction (HS-SPME). The proposed compound-independent quantification by EI-MS permits comparison of the performance of different fibers by assessing analyte recoveries with extreme robustness, simplicity, and precision.

A procedure for the determination of the uncertainties in the theoretical mass isotopomer distribution of molecules due to natural variations in the isotope composition of their constituting elements is described here for the first time. For this purpose, a Visual Basic macro for Microsoft Excel was written by adapting the direct stepwise calculation algorithm published by Kubinyi (Anal. Chim. Acta 1991, 247, 107-119, Fig. 1). In our procedure no pruning threshold factors were used to eliminate round up errors for large molecules. Then, the Kragten procedure of uncertainty propagation (Analyst 1994, 119, 2161-2165) was applied taking into account the correlation coefficients between the isotope abundances of the corresponding atoms. For bi-isotopic elements (C, H, N, Cl, Br) the correlation coefficients were given the value of -1. For tri- and tetra-isotopic elements the correlation coefficients were calculated using the mass dependent fractionation law used in stable isotope geochemistry and values of +1 or -1 were obtained depending on the isotope system considered. It was observed that for small organic molecules of natural isotope abundances, such as phenol or polybrominated diphenylethers, the method provided relatively small propagated uncertainties similar in magnitude to those measured experimentally. For (13)C-labelled molecules the calculated uncertainties were mainly due to the uncertainties in the isotope enrichment of (13)C and were much larger than the experimental uncertainties. For large molecules of natural isotope abundances, such as peptide C(68)H(107)N(17)O(25) (NIST 8327 RM), the uncertainties in their mass isotopomer distributions were much larger and their source could be assigned mainly to the uncertainty of the natural isotope composition of carbon. When the size of the molecule was even larger, such as bovine insulin (C(254)H(377)N(65)O(75)S(6)), Kragten procedure provided a good estimate for the uncertainty when the most probable isotope composition of carbon in mammals was used in the calculations.

A mixture of different (81)Br-labeled polybrominated diphenyl ethers (PBDEs) was prepared and characterized for its future use as spike for the isotope dilution analysis of PBDEs. The synthesis was carried out by direct bromination of diphenyl ether using (81)Br enriched Br(2) obtained after aqueous oxidation of bromide with potassium peroxymonosulfate and extraction into dichloromethane. The number of bromine atoms introduced in the diphenyl ether molecule depended on the molar ratio between bromine and diphenyl ether. The final mixture prepared contained a mixture of tri-, tetra-, penta-, and hexabrominated PBDEs with a larger concentration of the tetrabrominated congener BDE-47. The isotopic composition of bromine in the resulting PBDEs mixture was determined by GC(ICP)MS and resulted in a 99.53% enrichment of the isotope 81 of bromine. The concentration of three of the PBDE congeners (28, 47, and 99) in the mixture was determined by reverse isotope dilution analysis using a certified, natural abundance, PBDEs mixture and both GC(ICP)MS and GC(EI)MS. For this purpose, the fragmentation and isotope distribution patterns of the different PBDE cogeners in the positive electron ionization source were studied in detail both for natural abundance and labeled compounds. A procedure based on isotope pattern deconvolution was developed which allowed the direct determination of the concentration of the labeled PBDEs in the spike mixture by GC(EI)MS. Finally, the GC(EI)MS isotope pattern deconvolution procedure was applied for the determination of natural abundance congeners 28, 47, and 99 in spiked waters at ng L(-1) levels. Detection limits below 0.5 ng L(-1) could be obtained for all compounds using only 100 mL of sample and liquid-liquid extraction with isooctane.

Levels of imposex (superimposition of male characters, upon females) and the presence of sterile females are assessed in the gastropod Nassarius reticulatus (L.), at 35 locations in the Basque Country. At 18 of these localities, organotin bioaccumulation (tributyltin (TBT); dibutyltin; monobutyltin) was evaluated, using isotope dilution GC–ICP–MS. Higher imposex levels and TBT body burden were found in confined harbours, with large vessel traffic or the presence of an offshore fleet. The highest values were found for the port of Pasaia, near to a shipyard (a relative penis size index of up to 92%, and TBT body burden up to 405 ng g−1 – given on a dry weight basis as Sn). Imposex effects were evaluated also in parasitized females, at some of the sampling sites. The percentage of presence of c-type Vas Deferens sequence stages (i.e., with vas deferens beginning at the oviduct opening) was higher in parasitized females. In turn, there was an absence of highly convoluted oviduct in parasitized females.

Cheap and cheerful: Postcolumn carbon-isotope dilution with (13)CO(2) in combination with the coupling of gas chromatography, combustion, and EIMS (valve in position B in the picture) provides a generic quantitative approach for every organic compound without the need for specific standards. A GC-MS instrument can be upgraded by a simple low-cost modification without any loss of the structural information provided by electron ionization sources.

A method has been developed for the accurate determination of platinum by isotope dilution analysis, using enriched (194)Pt, in environmental samples containing comparatively high levels of hafnium without any chemical separation. The method is based on the computation of the contribution of hafnium oxide as an independent factor in the observed isotope pattern of platinum in the spiked sample. Under these conditions, the ratio of molar fractions between natural abundance and isotopically enriched platinum was independent of the amount of hafnium present in the sample. Additionally, mass bias was corrected by an internal procedure in which the regression variance was minimised. This was possible as the mass bias factor for hafnium oxide was very close to that of platinum. The final procedure required the measurement of three platinum isotope ratios (192/194, 195/194 and 196/194) to calculate the concentration of platinum in the sample. The methodology has been validated using the reference material "BCR-723 road dust" and has been applied to different environmental matrices (road dust, air particles, bulk wet deposition and epiphytic lichens) collected in the Aspe Valley (Pyrenees Mountains). A full uncertainty budget, using Kragten's spreadsheet method, showed that the total uncertainty was limited only by the uncertainty in the measured isotope ratios and not by the uncertainties of the isotopic composition of platinum and hafnium.

Rare earth elements (REEs) form anionic complexes which can be separated isocratically by anion-exchange chromatography using ethylenediaminetetraacetic acid (EDTA) as the mobile phase. For easy detection and identification, inductively coupled plasma (ICP) MS was used as detection method. From pH 3.5 to 7.5, retention increases from La to Sm and then decreases again up to Lu. Above pH 8.5, the retention of the light lanthanides increased drastically. It seems that the stoichiometry and the charge of the REE-EDTA complexes change with the elution pH. This strange elution behaviour can be easily tuned for particular applications by selecting the elution pH. For example, at pH values between 5.5 and 7.5 most isobaric and polyatomic interferences which occur in ICP-MS detection of the lanthanides are eliminated. A mechanism for the stepwise formation of the REE-EDTA complexes as a function of pH is proposed.

Large volume injection ion chromatography has been evaluated for the precise and accurate measurement of strontium isotope ratios by multicollector ICP-MS. On-line coupling of the ion chromatograph to the MC-ICP-MS instrument allowed the complete separation of isobaric rubidium and other matrix elements (Ca, Mg, Na and K) and the measurement of strontium isotope ratios on flat-topped chromatographic peaks of ca. 3 minutes duration. No drift in the strontium isotope ratios was observed during strontium elution and mass bias could be corrected using either the 86Sr/88Sr isotope ratio (internal correction) or the observed 87Rb/85Rb isotope ratio (external correction) in the real samples. Typical internal precisions obtained with the selected measurement and correction conditions were about 2 times lower than the precisions obtained with continuous sample introduction for a solution 50 ng g–1 of Sr NIST SRM 987 in HNO3 2% (typical standard deviations of 0.00022–0.00036 for the corrected 87Sr/86Sr ratio in comparison to 0.00014–0.00020 for continuous sample introduction). The method was applied to the measurement of strontium isotope ratios in cider samples and the results agreed with previous data obtained after an off-line Rb–Sr separation procedure using the Sr-Spec chelating material. The precision obtained for the real samples was poorer than previous data due to the low concentration of strontium in the measured samples. The method was also applied to other sample types (soil leachates, apple leaves and apples) to study the transference of strontium isotope ratios in the soil–tree–cider system.

Isotope pattern deconvolution is a mathematical technique for isolating distinct isotope signatures from mixtures of natural abundance and enriched tracers. In iron metabolism studies measurement of all four isotopes of the element by high-resolution multicollector or collision cell ICP-MS allows the determination of the tracer/tracee ratio with simultaneous internal mass bias correction and lower uncertainties. This technique was applied here for the first time to study iron uptake by cucumber plants using 57Fe-enriched iron chelates of the o,o and o,p isomers of ethylenediaminedi(o-hydroxyphenylacetic) acid (EDDHA) and ethylenediamine tetraacetic acid (EDTA). Samples of root, stem, leaves, and xylem sap, after exposure of the cucumber plants to the mentioned 57Fe chelates, were collected, dried, and digested using nitric acid. The isotopic composition of iron in the samples was measured by ICP-MS using a high-resolution multicollector instrument. Mass bias correction was computed using both a natural abundance iron standard and by internal correction using isotope pattern deconvolution. It was observed that, for plants with low 57Fe enrichment, isotope pattern deconvolution provided lower tracer/tracee ratio uncertainties than the traditional method applying external mass bias correction. The total amount of the element in the plants was determined by isotope dilution analysis, using a collision cell quadrupole ICP-MS instrument, after addition of 57Fe or natural abundance Fe in a known amount which depended on the isotopic composition of the sample.

In order to evaluate alternative analytical methodologies to study the geographical origin of ciders, both multi-elemental analysis and Sr isotope abundance ratios in combination with multivariate statistical analysis were estimated in 67 samples from England, Switzerland, France and two Spanish regions (Asturias and the Basque Country). A methodology for the precise and accurate determination of the (87)Sr/(86)Sr isotope abundance ratio in ciders by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) was developed. Major elements (Na, K, Ca and Mg) were measured by ICP-AES and minor and trace elements (Li, Be, B, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Mo, Cd, Sn, Sb, Cs, Ba, La, Ce, W, Tl, Pb, Bi, Th and U) were measured by ICP-MS using a collision cell instrument operated in multitune mode. An analysis of variance (ANOVA test) indicated that group means for B, Cr, Fe, Ni, Cu, Se, Cd, Cs, Ce, W, Pb, Bi and U did not show any significant differences at the 95% confidence level, so these elements were rejected for further statistical analysis. Another group of elements (Li, Be, Sc, Co, Ga, Y, Sn, Sb, La, Tl, Th) was removed from the data set because concentrations were close to the limits of detection for many samples. Therefore, the remaining elements (Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba) together with (87)Sr/(86)Sr isotope abundance ratio were considered for principal component analysis (PCA) and linear discriminant analysis (LDA). Finally, LDA was able to classify correctly 100% of cider samples coming from different Spanish regions, France, England and Switzerland when considering Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba and (87)Sr/(86)Sr isotope abundance ratio as original variables.

Large volume injection, up to 5 mL, was evaluated and optimised for the on-line ion chromatographic separation of Rb and Sr before ICP-MS measurement of Sr isotope ratios. Flat-topped chromatographic peaks, ideally suited for multicollector ICP-MS isotope ratio measurements, could be obtained when the composition of the mobile phase (nitric acid and 18-crown-6 ether) was identical to the matrix of the sample. Under those conditions rubidium eluted at the dead volume of the column while strontium produced a flat-topped transient signal with several minutes of stable plateau. On-line data acquisition during several minutes at the plateau of Sr signal allowed high precision Sr isotope ratio measurement. The developed procedure was evaluated for Sr isotope ratio measurements on different types of samples, including cider, apples, apple leaves, and soil extracts, in the frame of a long-term project aiming at origin authentication using strontium isotope ratio measurements. It was observed that sample matrix caused broadening of the strontium chromatographic peak and loss of flat-topped peak profile. Under those circumstances the addition of the complexing crown-ether 18-crown-6 both to samples and chromatographic eluent provided two distinct advantages. First, a drastic increase in the retention of strontium was observed which could be modulated by increasing the concentration of nitric acid in the eluent up to 900 mM. This increase in the eluent HNO3 concentration allowed the application of the method to acid soil digests and other high acidity samples. Second, the matrix of the sample did not affect any more the chromatographic peak profile and similar chromatographic separations could be obtained for samples and standards maintaining the flat-topped Sr peak profile. Sample preparation consisted of a simple 1:10 dilution of the cider or pre-treated solid samples by adding HNO3 (900 mM) and 18-crown-6 ether (5 mM) to obtain similar composition in the sample solution and the HPLC eluent.

This work describes the synthesis, characterization and application of three (81)Br-labeled diastereosiomers of hexabromocyclododecane (HBCD) for the accurate and precise determination of α-, β- and γ-HBCD in water samples by isotope dilution mass spectrometry. The synthesis of the labeled analogs was carried out by bromination of cis, trans, trans-1,5,9-cyclododecatriene with (81)Br-enriched bromine. After isolation and purification by semipreparative HPLC, each diastereoisomer was characterized in terms of concentration and isotopic enrichment. Then, they were added to the samples to simultaneously quantify the three HBCD diastereoisomers in a single LC-MS/MS injection without resorting to a methodological calibration graph. The results obtained here demonstrate that the use of (81)Br-labeled analogs provides accurate and precise determinations of α-, β- and γ-HBCD in real water samples. The limits of quantification obtained in real samples for α-, β- and γ-HBCD were 0.022, 0.073 and 0.015 ng L(-1), respectively, significantly lower than those required by the European Directive 2013/39/EC.

The current EU legislation lays down the Environmental Quality Standards (EQS) of 45 priority substances in surface water bodies. In particular, the concentration of tributyltin (TBT) must not exceed 0.2ngL(-1) and analytical methodologies with a Limit of Quantification (LOQ) equal or below 0.06ngL(-1) are urged to be developed. This work presents a procedure for the determination of ultratrace levels of TBT in water samples by Isotope Dilution and GC-MS/MS operating in Selected Reaction Monitoring (SRM) mode which meets current EU requirements. The method requires the monitorization of five consecutive transitions (287>175 to 291>179) for the sensitive and selective detection of TBT. The measured isotopic distribution of TBT fragment ions was in agreement with the theoretical values computed by a polynomial expansion algorithm. The combined use of Tandem Mass Spectrometry, a sample volume of 250mL, the preconcentration of 1mL of organic phase to 30μL and an injection volume of 25μL by Programmed Temperature Vaporization provided a LOQ of 0.0426ngL(-1) for TBT (calculated as ten times the standard deviation of nine independent blanks). The recovery for TBT calculated in Milli-Q water at the EQS level was 106.3±4%. A similar procedure was also developed for the quantification of dibutyltin (DBT) and monobutyltin (MBT) in water samples showing satisfactory results. The method was finally implemented in a routine testing laboratory to demonstrate its applicability to real samples obtaining quantitative recoveries for TBT at the EQS level in mineral water, river water and seawater.

We describe the instrumental modification of a commercial gas chromatography isotope ratio mass spectrometer (GC-IRMS) and its application for on-line carbon isotope dilution. The main modification consisted in the addition of a constant flow of enriched (13)CO2 diluted in helium after the chromatographic column through the splitter holder located inside the chromatographic oven of the instrument. In addition, and in contrast to the conventional mode of operation of GC-IRMS instruments where the signal at m/z 45 is amplified 100-fold with respect to the signal at m/z 44, the same signal amplification was used in both Faraday cups at m/z 44 and 45. Under these conditions isotope ratio precision for the ratio 44/45 was around 0.05% RSD (n=50). The evaluation of the instrument was performed with mixtures of organic compounds including 11 n-alkanes, 16 PAHs, 12 PCBs and 3 benzothiophenes. It was observed that compounds of very different boiling points could be analysed without discrimination in the injector when a Programmable Temperature Vaporizer (PTV) injector was employed. Moreover, the presence of heteroatoms (Cl or S) in the structure of the organic compounds did not affect their combustion efficiency and therefore the trueness of the results. Quantitative results obtained for all the analytes assayed were excellent in terms of precision (

This work describes the first multiple spiking isotope dilution procedure for organic compounds using (13)C labeling. A double-spiking isotope dilution method capable of correcting and quantifying the creatine-creatinine interconversion occurring during the analytical determination of both compounds in human serum is presented. The determination of serum creatinine may be affected by the interconversion between creatine and creatinine during sample preparation or by inefficient chemical separation of those compounds by solid phase extraction (SPE). The methodology is based on the use differently labeled (13)C analogues ((13)C1-creatinine and (13)C2-creatine), the measurement of the isotopic distribution of creatine and creatinine by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and the application of multiple linear regression. Five different lyophilized serum-based controls and two certified human serum reference materials (ERM-DA252a and ERM-DA253a) were analyzed to evaluate the accuracy and precision of the proposed double-spike LC-MS/MS method. The methodology was applied to study the creatine-creatinine interconversion during LC-MS/MS and gas chromatography-mass spectrometry (GC-MS) analyses and the separation efficiency of the SPE step required in the traditional gas chromatography-isotope dilution mass spectrometry (GC-IDMS) reference methods employed for the determination of serum creatinine. The analysis of real serum samples by GC-MS showed that creatine-creatinine separation by SPE can be a nonquantitative step that may induce creatinine overestimations up to 28% in samples containing high amounts of creatine. Also, a detectable conversion of creatine into creatinine was observed during sample preparation for LC-MS/MS. The developed double-spike LC-MS/MS improves the current state of the art for the determination of creatinine in human serum by isotope dilution mass spectrometry (IDMS), because corrections are made for all the possible errors derived from the sample preparation step.