Search

The combination of an ordinary s-type superconductor with three-dimensional topological insulators creates a promising platform for fault-tolerant topological quantum computing circuits based on Majorana braiding. The backbone of the braiding mechanism are three-terminal Josephson junctions. It is crucial to understand the transport in these devices for further use in quantum computing applications. We present low-temperature measurements of topological insulator-based three-terminal Josephson junctions fabricated by a combination of selective-area growth of $\mathrm{Bi_{0.8}Sb_{1.2}Te_3}$ and shadow mask evaporation of Nb. This approach allows for the in-situ fabrication of Josephson junctions with an exceptional interface quality, important for the study of the proximity-effect. We map out the transport properties of the device as a function of bias currents and prove the coupling of the junctions by the observation of a multi-terminal geometry induced diode effect. We find good agreement of our findings with a resistively and capacitively shunted junction network model., Comment: 9 pages, 5 figures, 6 pages supplemental material including 7 figures

Nanoscale superconducting quantum interference devices (SQUIDs) are fabricated in-situ from a single Bi$_{0.26}$Sb$_{1.74}$Te$_{3}$ nanoribbon that is defined using selective-area growth and contacted with superconducting Nb electrodes via a shadow mask technique. We present $h/(2e)$ magnetic flux periodic interference in both, fully and non-fully proximitized nanoribbons. The pronounced oscillations are explained by interference effects of coherent transport through topological surface states surrounding the cross-section of the nanoribbon., Comment: 7 pages, 4 figures, supplementary material

With increasing attention in Majorana physics for possible quantum bit applications, a large interest has been developed to understand the properties of the interface between a $s$-type superconductor and a topological insulator. Up to this point the interface analysis was mainly focused on in situ prepared Josephson junctions, which consist of two coupled single interfaces or to ex-situ fabricated single interface devices. In our work we utilize a novel fabrication process, combining selective area growth and shadow evaporation which allows the characterization of a single in situ fabricated Nb/$\mathrm{(Bi_{0.15}Sb_{0.85})_2Te_3}$ nano interface. The resulting high interface transparency is apparent by a zero bias conductance increase by a factor of 1.7. Furthermore, we present a comprehensive differential conductance analysis of our single in situ interface for various magnetic fields, temperatures and gate voltages. Additionally, density functional theory calculations of the superconductor/topological insulator interface are performed in order to explain the peak-like shape of our differential conductance spectra and the origin of the observed smearing of conductance features., Comment: Main manuscript: 11 pages, 6 figures, Supplementary material: 10 pages, 9 figures

The proximity effect at a highly transparent interface of an s-wave superconductor (S) and a topological insulator (TI) provides a promising platform to create Majorana zero modes in artificially designed heterostructures. However, structural and chemical issues pertinent to such interfaces are poorly explored so far. Here, we report the discovery of Pd diffusion induced polarization at interfaces between superconductive Pd$_{1+x}$(Bi$_{0.4}$Te$_{0.6}$)$_2$ (xPBT, $0\le x \le 1$) and Pd-intercalated Bi$_2$Te$_3$ by using atomic-resolution scanning transmission electron microscopy. Our quantitative image analysis reveals that nanoscale lattice strain and QL polarity synergistically suppress and promote the Pd diffusion at the normal and parallel interfaces, formed between Te-Pd-Bi triple layers (TLs) and Te-Bi-Te-Bi-Te quintuple layers (QLs), respectively. Further, our first-principles calculations unveil that the superconductivity of xPBT phase and topological nature of Pd-intercalated Bi$_2$Te$_3$ phase are robust against the broken inversion symmetry. These findings point out the necessity of considering coexistence of electric polarization with superconductivity and topology in such S-TI systems.

We present low-temperature magnetoconductance measurements on Bi$_{1.5}$Sb$_{0.5}$Te$_{1.8}$Se$_{1.2}$ kinks with ribbon-shaped legs. The conductance displays a clear dependence on the in-plane magnetic field orientation. The conductance modulation is consistent with orbital effect-driven trapping of the topological surface states on different side facets of the legs of the kink, which affects their transmission across the kink. This magnetic field-driven trapping and conductance pattern can be explained with a semiclassical picture and is supported by quantum transport simulations. The interpretation is corroborated by varying the angle of the kink and analyzing the temperature dependence of the observed magnetoconductance pattern, indicating the importance of phase coherence along the cross section perimeter of the kink legs., Comment: Main Text (7 pages, 4 figures) and Supplemental Material (3 pages, 3 figures)

We present low-temperature magnetotransport measurements on selectively-grown Sb$_2$Te$_3$-based topological insulator ring structures. These topological insulator ring geometries display clear Aharonov-Bohm oscillations in the conductance originating from phase-coherent transport around the ring. The temperature dependence of the oscillation amplitude indicates that the Aharonov-Bohm oscillations originate from ballistic transport along the ring arms. The oscillations can therefore be attributed to topological surface states, which can maintain a quasi-ballistic transport regime in the presence of disorder. Further insight on the phase coherence is gained by comparing with similar Aharonov-Bohm-type oscillations in topological insulator nanoribbons exposed to an axial magnetic field. Here, quasi-ballistic phase-coherent transport is confirmed for closed-loop topological surface states in transverse direction enclosing the cross-section of the nanoribbon. In contrast, the appearance of universal conductance fluctuations indicates phase-coherent transport in the diffuse regime, which is attributed to bulk carrier transport. Thus, it appears that even in the presence of diffusive $p$-type charge carriers in Aharonov-Bohm ring structures, phase-coherent quasi-ballistic transport of topologically protected surface states is maintained over long distances., Comment: 11 pages (including Supplementary Material), 5 figures, 4 supplementary figures

In an in-situ prepared three-terminal Josephson junction based on the topological insulator Bi$_4$Te$_3$ and the superconductor Nb the transport properties are studied. The differential resistance maps as a function of two bias currents reveal extended areas of Josephson supercurrent including coupling effects between adjacent superconducting electrodes. The observed dynamics for the coupling of the junctions is interpreted using a numerical simulation of a similar geometry based on a resistively and capacitively shunted Josephson junction model. The temperature dependency indicates that the device behaves similar to prior experiments with single Josephson junctions comprising topological insulators weak links. Irradiating radio frequencies to the junction we find a spectrum of integer Shapiro steps and an additional fractional step, which is interpreted by a skewed current-phase relationship. In a perpendicular magnetic field we observe Fraunhofer-like interference patterns of the switching currents., Comment: 8 pages, 7 Figures, includes Supplementary Information, submitted to Nanomaterials

Despite the fact that GeTe is known to be a very interesting material for applications in thermoelectrics and for phase-change memories, the knowledge on its low-temperature transport properties is only limited. Here, we report on phase-coherent phenomena in the magnetotransport of GeTe nanowires. From universal conductance fluctuations, a phase-coherence length of about 200nm at 0.5K is determined for the hole carriers. The distinct phase-coherence is confirmed by the observation of Aharonov--Bohm type oscillations for magnetic fields applied along the nanowire axis. We interpret the occurrence of these magnetic flux-periodic oscillations by the formation of a tubular hole accumulation layer on the nanowire surface. In addition, for Nb/GeTe-nanowire/Nb Josephson junctions, we obtained a proximity-induced critical current of about 0.2$\mu$A at 0.4K. By applying a magnetic field perpendicular to the nanowire axis, the critical current decreases monotonously with increasing magnetic field, which indicates that the structure is in the small-junction-limit. Whereas, by applying a parallel magnetic field the critical current oscillates with a period of the magnetic flux quantum indicating once again the presence of a tubular hole channel., Comment: 9 pages, 4 figures

Quasi-1D nanowires of topological insulators are emerging candidate structures in superconductor hybrid architectures for the realization of Majorana fermion based quantum computation schemes. It is however technically difficult to both fabricate as well as identify the 1D limit of topological insulator nanowires. Here, we investigated selectively-grown Bi$_2$Te$_3$ topological insulator nanoribbons and nano Hall bars at cryogenic temperatures for their topological properties. The Hall bars are defined in deep-etched Si$_3$N$_4$/SiO$_2$ nano-trenches on a silicon (111) substrate followed by a selective area growth process via molecular beam epitaxy. The selective area growth is beneficial to the device quality, as no subsequent fabrication needs to be performed to shape the nanoribbons. Transmission line measurements are performed to evaluate contact resistances of Ti/Au contacts applied as well as the specific resistance of the Bi$_2$Te$_3$ binary topological insulator. In the diffusive transport regime of these unintentionally $n$-doped Bi$_2$Te$_3$ topological insulator nano Hall bars, we identify distinguishable electron trajectories by analyzing angle-dependent universal conductance fluctuation spectra. When the sample is tilted from a perpendicular to a parallel magnetic field orientation, these high frequent universal conductance fluctuations merge with low frequent Aharonov-Bohm type oscillations originating from the topologically protected surface states encircling the nanoribbon cross section. For 500 nm wide Hall bars we also identify low frequent Shubnikov-de Haas oscillations in the perpendicular field orientation, that reveal a topological high-mobility 2D transport channel, partially decoupled from the bulk of the material., Comment: 13 pages, 5 figures, 6 pages supplementary information, 5 supplementary figures

Universal conductance fluctuations and the weak antilocalization effect are defect structure specific fingerprints in the magnetoconductance that are caused by electron interference. Experimental evidence is presented that the conductance fluctuations in the present topological insulator (Bi$_{0.57}$Sb$_{0.43}$)$_2$Te$_3$ nanoribbons which are selectively grown by molecular beam epitaxy are caused by well-defined and sharply resolved phase-coherent loops. From measurements at different magnetic field tilt angles we deduced that these loops are preferentially oriented parallel to the quintuple layers of the topological insulator material. Both from a theoretical analysis of universal conductance fluctuations and from weak antilocalization measured at low temperature the electronic phase-coherence lengths $l_\phi$ are extracted, which is found to be larger in the former case. Possible reasons for this deviation are discussed., Comment: 7 pages, 6 figure