Search

Recently, there has been a significant transition in the dietary preferences of consumers toward foods containing health-promoting compounds. In addition, as people's environmental awareness increases, they are increasingly looking for sustainable solutions. Palm oil, an oil used extensively by the food industry, does not fit these criteria. This study investigated the development of a complex oil blend consisting of commonly used vegetable oils such as corn, rapeseed, sunflower, and palm oil. The aim was to find the optimal blended oil and compare this combination with palm oil in terms of its oxidative stability, antioxidant capacity, and the composition of bioactive compounds (i.e., fatty acids, tocopherols, and carotenoids). Palm oil was found to have greater oxidative stability as a result of its increased concentration of saturated fatty acids. The optimal blended oil, which consisted of corn and rapeseed oil at a ratio of 4:3 w/w, inhibited the superior antioxidant activity, showing a ~33% increase in DPPH• inhibition activity. ATR-FTIR spectra further verified the existence of a significant quantity of saturated fatty acids in palm oil and unsaturated fatty acids in the blended oil. Finally, several correlation analyses revealed interesting connections between oil samples and investigated parameters. This work has the potential to establish a basis for the mass production of oil blends that possess high concentrations of antioxidant compounds and reduce the use of palm oil. [ABSTRACT FROM AUTHOR]

Rosemary has many medicinal and therapeutic properties and therefore it is important to study how to maximize the recovery of its bioactive compounds. In the present study, four different extraction techniques were used, namely stirring extraction (STE), pulsed electric field-assisted extraction (PEF), ultrasound probe-assisted extraction (UPAE), and ultrasound bath-assisted extraction (UBAE). First, some primary experiments were carried out in order to optimize each technique individually through the Plackett–Burman design. Then, each technique was applied under optimal conditions and the results were compared with each other. The optimal total polyphenol content (TPC) of STE is ~19 mg gallic acid equivalents per gram of dry weight (dw), while the antioxidant activity of the extract is 162 μmol ascorbic acid equivalents (AAEs) per gram of dw via FRAP and ~110 μmol AAE per gram of dw via DPPH. As for PEF, the optimal TPC is ~12 mg GAE/g dw, and the FRAP and DPPH values are ~102 and ~70 μmol AAE per gram of dw, respectively. When it comes to UPAE, the optimal TPC is ~16 mg GAE/g dw and the antioxidant capacity of the extract is ~128 μmol AAE/g dw through FRAP and ~98 μmol AAE/g dw through DPPH. UBAE optimal extract yielded ~17 mg GAE/g dw TPC, ~146 μmol AAE/g dw for FRAP, and ~143 μmol AAE/g dw for DPPH. The highest flavonoid content (~6.5 mg rutin equivalent/g dw) and DPPH (~143 μmol ascorbic acid equivalent/g dw) is obtained through UBAE. UPAE has been shown to be more efficient in recovering ascorbic acid (~20 mg/g dw). Additionally, the chlorophyll-to-carotenoid ratios of UPAE and UBAE were 2.98 and 2.96, respectively, indicating that the extracts had a generally positive impact on health. Considering the environmental impact of each extraction technique but also which antioxidant factor needs to be maximized, the most suitable extraction technique will be chosen. [ABSTRACT FROM AUTHOR]

Hemp, commonly known as Cannabis sativa L., is a medicinal plant species of the Cannabaceae family. For the efficient extraction of C. sativa leaves using the conventional stirring process with water as the solvent, three crucial extraction parameters (i.e., extraction duration, liquid–solid ratio, and temperature) were investigated through the response surface methodology (RSM). The concentrations of the extracted bioactive compounds (polyphenols, ascorbic acid, and carotenoids) showed significant variations in the RSM design points, suggesting the importance of finding the optimal extraction conditions in which liquid–solid ratio and extraction temperature were found to have the highest impact. Further analysis was conducted on the optimal extract employing several assays to determine their polyphenol content, total carotenoid content, color evaluation, anti-inflammatory activity, and antioxidant capacity through FRAP, DPPH, and H2O2 assays. A low extraction time (30 min) at 50 °C and a high liquid–solid ratio (50:1) were required for the highest possible yield of polyphenols. The total polyphenol content was determined to be 9.76 mg gallic acid equivalents/g under optimum conditions, with pelargonin being the most abundant polyphenol (1.51 mg/g) in C. sativa extracts. Ascorbic acid was measured at 282.23 μg/g and total carotenoids at 356.98 μg/g. Correlation analyses revealed that anti-inflammatory activity was negatively correlated with specific polyphenols. As determined by DPPH (27.43 μmol ascorbic acid equivalents (AAE)/g), FRAP (49.79 μmol AAE/g), and H2O2 (230.95 μmol AAE/g) assays, the optimized aqueous extract showed a high antioxidant capacity. Furthermore, it demonstrated considerable anti-inflammatory activity at 17.89%, with the potential to increase to 75.12% under particular extraction conditions. Given the high added-value of the aqueous extracts, the results of this study highlight the potential utility of C. sativa leaves as a source of health-improving antioxidant compounds in the pharmaceutical and food industries. [ABSTRACT FROM AUTHOR]

Moringa oleifera leaves are rich sources of bioactive compounds with potential health benefits, including antioxidants and anti-inflammatory agents. Pressurized liquid extraction (PLE) stands out as a promising technique for effectively extracting valuable compounds from natural sources. In this study, we aimed to optimize PLE parameters, such as temperature, extraction duration, and pressure, to maximize bioactive compound (polyphenols, flavonoids, and ascorbic acid) yield from M. oleifera leaves and evaluate their antioxidant and anti-inflammatory activities. According to the outcomes of this research, the maximum achieved total polyphenol content was 24.10 mg gallic acid equivalents (GAE)/g of dry weight (dw), and the total flavonoid content was increased up to 19.89 mg rutin equivalents (RtE)/g dw. Moreover, after HPLC-DAD analysis, neochlorogenic and chlorogenic acids, catechin and epicatechin, rutin, and narirutin were identified and quantified. As far as the optimum ascorbic acid content is concerned, it was found to be 4.77 mg/g dw. The antioxidant activity was evaluated by three different methods: ferric reducing antioxidant power (FRAP), the DPPH method, and the anti-hydrogen peroxide activity (AHPA) method, resulting in 124.29 μmol ascorbic acid equivalent (AAE)/g dw, 131.28 μmol AAE/g dw, and 229.38 μmol AAE/g dw values, respectively. Lastly, the albumin denaturation inhibition was found to be 37.54%. These findings underscore the potential of PLE as an efficient extraction method for preparing extracts from M. oleifera leaves with the maximum content of bioactive compounds. [ABSTRACT FROM AUTHOR]

Citrus processing side-streams are largely represented by waste orange peels (WOP), and there are several techniques developed for polyphenol extraction from WOP; yet, there are a significant lack of methodologies based on non-conventional, green solvents. On this basis, this study was performed to assess a deep eutectic solvent (DES) synthesized with glycerol and sodium butyrate, for its capacity to extract WOP polyphenols. Optimization of the process was carried out using a response surface methodology, which revealed that a maximum total polyphenol yield of 73.36 mg gallic acid equivalent (GAE) g−1 dry mass (DM) could be achieved with a solvent system of DES/water (80% w/w), a residence time of 120 min, and a temperature of 90 °C. Using these settings, the polyphenol extraction from WOP with the DES/water solvent system was found to have outstanding performance compared to aqueous or hydroethanolic extraction, while the extracts generated possessed significantly enhanced antioxidant properties. The chromatographic analyses of the extracts demonstrated that the DES/water extract was particularly enriched in hesperidin (21.81 mg g−1 dry mass), a bioflavonoid with promising pharmaceutical potential. This is a first report on the use of this particular DES for WOP polyphenol extraction, which may be used to produce hesperidin-enriched extracts, by implementing the methodology developed. [ABSTRACT FROM AUTHOR]

Prunus cerasus, commonly known as sour cherry, is a fruit widely consumed during the summer season. Processing of sour cherries results in the generation of substantial amounts of by-products. Following the extraction of juice, the residual pomace (comprising of skin and flesh) and pits remain as by-products. This study delves into the antioxidant potential derived from the phenolic compounds present in sour cherry pomace and the oil derived from its seeds, both demonstrating significant implications for human health and longevity. The increasing demand for bioactive compounds from natural resources, to be used as ingredients in functional foods, as well as the increased global production of sour cherries, has spurred considerable interest in these by-products. The growing demand for more sustainable practices has necessitated the use of industrial fruit by-products. To this end, many articles have been published regarding sour cherry skin and pits utilization. This comprehensive review aims to elucidate advanced techniques for extracting antioxidants from sour cherries and discern optimal strategies for broad-scale industrial implementation. [ABSTRACT FROM AUTHOR]

The food processing industry is a continuously developing sector that uses innovative technologies to efficiently process food products. During processing, food industries generate substantial amounts of by-products in the form of waste materials. This food waste consists of organic matter rich in bioactive compounds, such as polyphenols, carotenoids, and flavonoids. Improper management of food waste can adversely affect both the environment and human health, leading to environmental pollution and the release of greenhouse gas emissions. Thus, proper food waste management has become an urgent global issue. The presence of bioactive compounds (mainly polyphenols, flavonoids, and anthocyanins, but also carotenoids, alkaloids, proteins, lipids, and carbohydrates) in food waste holds the potential to transform them into valuable resources. Several sectors, including food and energy, have recognized food waste as an innovative source. Recently, much emphasis has been placed on optimizing the extraction yield of such bioactive compounds through the utilization of environmentally friendly and sustainable methodologies and solvents. Pulsed electric field (PEF)-assisted extraction is an emerging technique that holds promise for the utilization of waste materials. PEF technology can efficiently optimize the extraction of valuable compounds within a shorter time while minimizing solvent and energy consumption. In this review, we provide a comprehensive overview of the current state of PEF technology and its implications for recovering bioactive compounds from food waste. The integration of innovative technologies like PEF in the food processing industry can play a crucial role in managing food waste sustainably, reducing environmental impact, and harnessing the full potential of bioactive compounds contained in these waste materials. The objective of this critical review is to provide an overview of the utilization of PEF pretreatment for food by-products and to conduct a comparative analysis with other extraction techniques. [ABSTRACT FROM AUTHOR]

The study focused on the examination of eight commercial hypertonic, isotonic, and hypotonic beverage samples that were packaged in aluminum cans or polyethylene terephthalate (PET) bottles. The pH value, caffeine content, and concentration of thirty elements were determined. Caffeine quantification was performed by a high-performance liquid chromatography method. Element determination was conducted by using inductively coupled plasma–optical emission spectrometry. The results showed that pH values were much more acidic in all samples, ranging from 2.68 to 3.97. Caffeine concentrations ranged from 0.02–38.93 mg/100 mL between the samples and were found to be below the acceptable daily level (~400 mg) established by the relevant food regulatory authority. The measurable quantity of caffeine (~10 mg/100 mL) was found in two functional beverage samples where caffeine was labeled as an ingredient. Element concentration varied with statistically significant differences (p < 0.05) among all samples. Elements such as arsenic, cadmium, chromium, and lead were measured below the corresponding permissible levels set by the European Commission; however, daily consumption of functional beverages should be examined to deteriorate several health risks. Aluminum was quantified above the parametric value by 21 to 117% in the canned samples, whereas antimony was only measured in PET-bottled samples at approximately 3 μg/L. Multivariate methods were applied to investigate any possible correlation between the samples and the examined parameters. Strong positive correlations with statistically significant differences (R > 0.9, p < 0.05) were observed between zinc and copper and between calcium and silver. Finally, similarities and differences between the samples and the examined parameters resulted in satisfactory discrimination of them regarding not only their caffeine content but also their tonicity. Excessive consumption of functional beverages could represent a major public health issue due to elevated amounts of caffeine and elements. Consequently, the results of this research could facilitate the formulation of stricter standards in beverage consumption by revealing potential health hazards to consumers. [ABSTRACT FROM AUTHOR]

Every day, more and more consumers choose to drink bottled water instead of tap water, since they believe that it is superior in quality. One of the criteria used by European consumers to choose bottled water is the geographical region of the spring. The flavor of the water is an additional factor that influences consumers' choices. As a result, determining the flavor of water is gaining popularity and is thus turning into a prominent field of study. However, studies on the potential environmental factors that affect the sensory characteristics of water (i.e., "terroir" of water) are limited. To this end, we investigated the composition of natural mineral water spring from Mount Smolikas in Greece over a two-year period to find any potential alterations in water composition. The physicochemical parameters (pH, conductivity, turbidity, color, and total hardness) of the water samples were examined, along with their content in metal ions, inorganic salts (cations and anions), and total organic carbon. Additionally, the water samples were analyzed for their content of off-odor volatile compounds (i.e., 2-methylisoborneol and geosmin) that can be naturally found in water. The study also examined the correlation of climate conditions (accumulated rainfall and mean temperature) with the parameters above using a principal component analysis and a multivariate correlation analysis. The results showed that the physicochemical characteristics of water samples complied with European regulations. Metals, anions, and cations were all below the corresponding parametric values established by the European Commission. The off-odor organic compounds, 2-methylisoborneol, and geosmin, had average concentrations of 9.4 and 2.7 ng/L, respectively. Chromium and aluminum elevated concentrations might be attributed to specific ores present near the water source, while pH, conductivity, total hardness, nitrates, and off-odor compounds levels could be fluctuated due to local climate conditions. The study revealed a good positive correlation (>0.7) between the quantity of rainfall and the level of potassium cations. Moreover, a strong negative correlation (>0.9) was observed between magnesium cations and the mean temperature of the local area. The study can be used as a benchmark for future studies to determine the terroir of mineral water. [ABSTRACT FROM AUTHOR]