Search

Over the past decade, perovskite photovoltaics have approached other currently available technologies and proven to be the most prospective type of solar cells. Although the many-sided research in this very active field has generated consistent results with regard to their undisputed consistently increasing power conversion efficiency, it also produced several rather contradictory opinions. Among other important details, debate surrounding their proneness to surface degradation and poor mechanical robustness, as well as the environmental footprint of this materials class, remains a moot point. The application of ionic liquids appears as one of the potential remedies to some of these challenges due to their high conductivity, the opportunities for chemical “tuning” of the structure, and relatively lower environmental footprint. This article provides an overview, classification, and applications of ionic liquids in perovskite solar cells. We summarize the use and role of ionic liquids as versatile additives, solvents, and modifiers in perovskite precursor solution, in charge transport layer, and in interfacial and stability engineering. Finally, challenges and the future prospects for the design and/or selection of ionic liquids with a specific profile that meets the requirements for next-generation highly efficient and stable perovskite solar cells are proposed.

Crystals can be found in many shapes but do not usually grow as spirals. Here we show that applying a non-uniform layer of a polymer blend onto slender centimeter-size organic crystals prestrains the crystals into hybrid dynamic elements with spiral shapes that respond reversibly to environmental variations in temperature or humidity by curling. Exposure to humidity results in partial uncurling within several seconds, whereby a logarithmic-type spiral crystal is transformed into an Archimedean one. Conical helices obtained by lateral pulling of the spirals can wind around solid objects similar to plant tendrils or lift suspended objects with a positive correlation between the actuator's elongation and the cargo mass. The morphological, kinematic, and kinetic attributes turn these hybrid materials into an attractive platform for flexible sensors and soft robots, while they also provide an approach to morph crystalline fibers in non-natural spiral habits inaccessible with the common crystallization approaches. The growth of crystals as spirals is unusual and this morphology can be applied to the development of flexible sensors and soft robots when the crystals respond to external stimuli. Here, the authors report the incorporation of a non-uniform layer of a polymer blend onto slender centimeter-size organic crystals to produce crystals having spiral shapes that respond reversibly to environmental variations. [ABSTRACT FROM AUTHOR]

The realm of self-healing materials integrates chemical and physical mechanisms that prevent wear and fracturing and extend the operational lifetime. Unlike the favorable rheology of amorphous soft materials that facilitates efficient contact between fragments, the efficiency of recovery of atomistically ordered materials is restricted by slower interfacial mass transport and the need for ideal physical alignment, which limits their real-world application. We report drastic enhancements in efficiency and recovery time in the self-healing of anilinium bromide, challenging these limitations. Crystals of this material recovered up to 49% within seconds and up to 95% after 100 min via ferroelastic detwinning. The spatial evolution of strain during cracking and healing was measured in real time using digital image correlation. Favorable alignment and strong ionic bonding across the interface of partially fractured crystals facilitate self-healing. This study elevates organic crystals close to the best-in-class self-healing polymers and sets an approach for durable crystal-based optoelectronics. Self-healing in structurally ordered materials is restricted by slow interfacial mass transport and the need for ideal physical alignment. Here the authors show self-healing in an anilinium bromide crystals achieving up to 95% recovery through ferroelastic detwinning. [ABSTRACT FROM AUTHOR]

The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat‐averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits. [ABSTRACT FROM AUTHOR]

Structurally ordered soft materials that respond to complementary stimuli are susceptible to control over their spatial and temporal morphostructural configurations by intersectional or combined effects such as gating, feedback, shape‐memory, or programming. In the absence of general and robust design and prediction strategies for their mechanical properties, at present, combined chemical and crystal engineering approaches could provide useful guidelines to identify effectors that determine both the magnitude and time of their response. Here, we capitalize on the purported ability of soft intermolecular interactions to instigate mechanical compliance by using halogenation to elicit both mechanical and photochemical activity of organic crystals. Starting from (E)‐1,4‐diphenylbut‐2‐ene‐1,4‐dione, whose crystals are brittle and photoinert, we use double and quadruple halogenation to introduce halogen‐bonded planes that become interfaces for molecular gliding, rendering the material mechanically and photochemically plastic. Fluorination diversifies the mechanical effects further, and crystals of the tetrafluoro derivative are not only elastic but also motile, displaying the rare photosalient effect. [ABSTRACT FROM AUTHOR]

The rapid release of gas by a chemical reaction to generate momentum is one of the most fundamental ways to elicit motion that could be used to sustain and control the motility of objects. We report that hollow crystals of a three‐dimensional supramolecular metal complex that releases gas by photolysis can propel themselves or other objects and advance in space when suspended in mother solution. In needle‐like regular crystals, the reaction occurs mainly on the surface and results in the formation of cracks that evolve due to internal pressure; the expansion on the cracked surface of the crystal results in bending, twisting, or coiling of the crystal. In hollow crystals, gas accumulates inside their cavities and emanates preferentially from the recess at the crystal terminus, propelling the crystals to undergo directional photomechanical motion through the mother solution. The motility of the object which can be controlled externally to perform work delineates the concept of "crystal microbots", realized by photoreactive organic crystals capable of prolonged directional motion for actuation or delivery. Within the prospects, we envisage the development of a plethora of light‐weight, efficient, autonomously operating robots based on organic crystals with high work capacity where motion over large distances can be attained due to the large volume of latent gas generated from a small volume of the crystalline solid. [ABSTRACT FROM AUTHOR]