Search

To address the lengthy cycles, complex operations, high costs, and insufficient sensitivity of biomarker detection in traditional biological control agents, photonic crystal treated with PEI was developed for highly sensitive detection of Sclerotinia sclerotiorum microbial spores. By incorporating gelatin molecules, photonic crystal is endowed with excellent photothermal stability and high stability in aqueous solutions. The photonic crystal surface is conferred a positive charge by PEI, which can be used to enhance the adsorption of spores. Efficient enrichment of Sclerotinia sclerotiorum and Purpureocillium lilacinum spores is achieved, with coefficients of determination 0.963 and 0.971, respectively. The detection range is from 10 2 to 10 6 spores/ml, and the photonic crystal exhibited good reusability. The prepared photonic crystal enables rapid, non-destructive, and accurate quantitative detection of microbial spores., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Directional differentiation is a key factor determining the result of stem cell therapy. Herein, we developed a polyethylenimine (PEI)-coated poly(lactic- co -glycolic) acid (PLGA) nanoparticle (mPDN) carrying both nuclear factor erythroid 2-related factor 2 (Nrf2) mRNA and dexamethasone (Dex) to human mesenchymal stem cells (hMSCs). The combination of Dex and Nrf2-mRNA delivered by mPDN promoted the osteogenic differentiation of hMSCs. In particular, Nrf2-mRNA rapidly reduced the DNA damage caused by ROS due to early and efficient gene expression at 3 h after treatment, which was not achieved in traditional pDNA systems. High and rapid transfection, effective ROS-scavenging effect, and protection of mitochondrial dynamics were observed in hMSCs after treatment with the resulting Nrf2-mPDN. Osteogenic differentiation was also observed in 3D pellets for up to 5 weeks. Finally, the effects of rapid DNA repair in hMSCs by Nrf2-mPDN and on in vivo bone regeneration were evaluated in a rat femoral bone defect model using CT. This study demonstrated the potential of an NP-based codelivery system and efficient transfection of mRNA at early stages in hMSCs for bone regeneration and stem cell therapy.

Probiotics health benefits are hampered by long-term storage, gastrointestinal transit, and lack of adequate colonization within the colon. To this end, we have designed a core-shell structure that features an acid resistant core formulation with low water activity composed of alginate, hydroxypropyl methyl cellulose, and gellan gum (AHG) and a mucoadhesive shell made from chemically modified carboxymethyl chitosan with polyethylenimine (PEI-CMC). The structure of the core-shell microparticles was examined using scanning electron microscopy, and rheological measurements confirmed the improved ionic interactions between the core and the shell using the PEI-modified CMC. Simulated release from core-shell microparticles using polystyrene beads showed preferential release under intestinal conditions. PEI-CMC coating yielded improvements in mucoadhesion that was consistent with a positive shift in surface charge of the particles. Ex vivo studies using Bifidobacterium lactis probiotic bacteria demonstrated a 1.1 × 10 5 -fold improvement in bacterial viability with encapsulation under storage conditions of high humidity and temperature (30 °C). When exposed to simulated gastric fluid, encapsulation increased the probiotic viability by 3.0 × 10 2 -fold. In vivo studies utilizing bioluminescent Lactobacillus plantarum in mice revealed that encapsulation extended the duration of the signal within the gut and resulted in higher plate counts in suspensions isolated from the cecum. Conversely, we observed an abrupt loss of signal in the gut of the free probiotic. In conclusion, this core-shell system is suitable for improving probiotic shelf life and maximizing delivery to and retention by the colon.

Owning to the hydrophobic characteristics of microporous organic networks (MONs), their utilizations still largely limited in non- and weak-polar analytes. To expend their applications, here we reported the synthesis of a novel hollowed H-MON-PEI 1800 -2 composite via sacrifice template method and subsequent modification with polyethyleneimine (PEI) for efficient solid phase extraction of polar and ionic phenolic acid (PAs) from fruit juice samples. H-MON-PEI 1800 -2 exhibits large surface area, rapid extraction kinetics, remarkable chemical and thermal stabilities, and provides synergistic electrostatic, π-π, hydrogen bonding, and hydrophobic interaction sites for PAs. The developed method owns low limit of detection, wide linear range, large enrichment factors, and good reusability. The recoveries of H-MON-PEI 1800 -2 for PAs are 1-3 orders of magnitude higher than those of commercial adsorbents like activated carbon, C18 and Oasis HLB. This work highlights the prospects of functional H-MONs for enriching polar and ionic targets from complex sample matrices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Malignant tumors, also known as cancers, are a global public health problem. Nanogels are promising carriers for the delivery of anticancer medicines. Therefore, based on the unique microenvironment of tumor cells and the advantages of nanogels, a simple and economical one-pot synthesis method was designed to construct natural polysaccharide-based redox-responsive nanogels (LDD NGs). The enhanced permeability and retention (EPR) effect enriched LDD NGs in tumor cells, which then rapidly collapsed and released the natural antitumor drug diosgenin (DG) and the natural polysaccharide lentinan (LNT) via the depletion of a high level of reduced glutathione (GSH) in tumor cells, resulting in a synergistic therapeutic effect of chemotherapy and immunotherapy. In vivo antitumor experiments showed that LDD NGs could inhibit the proliferation and metastasis of the A549 lung cancer cells. Further studies indicated that LDD NGs could increase the production of ROS and induce apoptosis of A549 cells. In addition, LNT released from LDD NGs could promote the proliferation of dendritic cells, increase the production of NO, and upregulate the expressions of the costimulatory molecules CD40, CD80, CD86, and MHC-II. The construction of LDD NGs was a novel drug synthesis approach that could provide fresh ideas for the development of polysaccharide-based redox-responsive drug delivery systems.

Despite the potent immunoadjuvant properties of mevalonate pathway inhibitors, their application is constrained by poor solubility and instability. In this study, we developed a cationic nanoparticle-stabilized Pickering emulsion loaded with lovastatin (Lov-PPE), using polyethylenimine (PEI)-modified PLGA nanoparticles and squalene as carriers. The system was prepared and tested by evaluating the physicochemical properties and adjuvant efficacy of the Lov-PPE. Lov-PPE/O demonstrated good particle size distribution and zeta potential, with an adsorption efficiency of up to 73.07%. The immunization results showed that Lov-PPE/O significantly promoted the production of OVA-specific IgG antibodies, activated CD4 + and CD8 + T cells, and induced a strong mixed Th1/2 immune response. Additionally, safety assessments indicated that Lov-PPE/O has good in vivo safety. This study demonstrates that the PEI-modified lovastatin PLGA nanoparticle Pickering emulsion (Lov-PPE) is an effective vaccine adjuvant capable of significantly enhancing humoral and cellular immune responses while possessing good safety, offering a new strategy for vaccine formulation development.

A nonhalogenated and ecofriendly flame-retarding material was developed using lignin, one of the main components of lignocellulosic biopolymers. Lignin was purified, dissolved, and formulated as nanoparticles and implemented after processing in an ecofriendly water-based γ-valerolactone (GVL) system at different concentrations. Nitrogen‑phosphorus sequential chemical modification was performed using polyethyleneimine (PEI) and phytic acid (PA), The char residue increased by ≥10 % compared with lignin nanoparticles (LNPs). A 10 wt% lignin-based flame retardant (L-FR) based on the weight of cotton fabric was introduced using a simple dipping method. Compared to existing cotton fabrics, the combustion time of L-FR treated cotton fabrics was reduced by 6.8 s. The maximum flame height was reduced by 5.4 cm, and the charcoal residue increased by 25 %. The flame-retarding mechanism of L-FR involved low-temperature dehydration, thermal decomposition of cellulose by the phosphorus component of PA and generation of expansive gas by the nitrogen component of PEI. These results showed that lignin-based raw material processing, polymer processing, and chemical modification were biomass-based, suggesting that lignin could be converted into an ecofriendly flame retardant, highlighting the feasibility of high-value-added lignin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Carbonic anhydrase (CA) enzyme-based absorption technology for CO 2 capture has been intensively investigated. However, low solubility of CO 2 and poor stability of CA severely limits its industrial utilization. Here, hydrolyzed polyacrylonitrile (PAN) membrane (HPAN) was first modified by polyethyleneimine (PEI) with a large number of amino groups, which has a strong affinity for CO 2 . Then, ZIF-8 was grown in situ on the surface of HPAN/PEI membrane by using the metal chelation of PEI and Zn 2+ . In this process, CA was embedded inside ZIF-8 by co-precipitation (CA@HPAN/PEI/ZIF-8). The resultant CA@HPAN/PEI/ZIF-8 exhibited high catalytic activity for CO 2 capture compared with free CA, which was due to the synergistic enhancement of CO 2 capture by PEI and ZIF-8 with high affinity to CO 2 and enzymatic catalysis. The yield of CaCO 3 by CA@HPAN/PEI/ZIF-8 in the process of one-time conversion of CO 2 was 13.6-fold higher than free CA. Furthermore, the CA@HPAN/PEI/ZIF-8 showed better thermal stability, storage and reusability than free CA. Free CA retained only 18.3 % of its original activity after 18 days of storage, whereas CA@HPAN/PEI/ZIF-8 remained 48.7 % of its original activity. The total CaCO 3 yield by CA@HPAN/PEI/ZIF-8 was 74.9-fold that of free CA after 8 consecutive rounds of CO 2 conversion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The immunosuppressive microenvironment severely limits the responsiveness of colorectal cancer (CRC) to immunotherapy. Herein, a pH and reactive oxygen species (ROS) dual-responsive autocatalytic release system (TPDM/PGA) is constructed to reverse the immunosuppressive microenvironment and potentiate CRC immunotherapy. Dihydroartemisinin (DHA) and mitoxantrone (MTO) are conjugated to ROS-responsive polyethylenimine (TP) via a ROS-cleavable linker, respectively, and then coated with polyglutamic acid (PGA) to endow pH and ROS dual-responsiveness. The dissociation of PGA within the acidic TME facilitates its deep penetration and cell internalization, while the intracellular released DHA and MTO in response to high levels of H 2 O 2 further produced a large amount of ROS, forming positive feedback to accelerate drug release and exacerbate oxidative stress. TPDM/PGA collaboratively reversed the immunosuppressive microenvironment and induced a strong anti-tumor immune response when combined with anti-PD-L1 antibody, significantly inhibiting tumor growth and prolonging the survival time of CT26 and MC38 tumor-bearing mice. The excellent therapeutic effect, together with the good tolerance, make TPDM/PGA a promising candidate for enhanced immunotherapy of colorectal cancer., (© 2024 Wiley‐VCH GmbH.)

Novel eco-friendly strength agent has inspired much attention of researchers. Herein, the PEI-KH560 prepared by PEI (polyethyleneimine) and KH560 (γ-glycidyl ether propyl trimethoxysilane) was added in the pulp suspension to enhance the paper performance. The results showed that the m(PEI):m(KH560) ratio and PEI's molecular weight were closely related with the paper strength and hydrophobicity. The SEM morphology of paper surface showed that the fiber-fiber crosslinking reached the tightest, at the optimal m(PEI):m(KH560) ratio and PEI's molecular weight. The results showed that when the M w (molecular weight) of PEI was 10,000 and the m(PEI):m(KH560) ratio was 1:2, the PEI-KH560 presented the best strengthening performance on the paper strength and hydrophobicity. Dry tensile index and wet tensile index could reach 29.9 N·m/g and 1.37 N·m/g after adding the PEI 10000 -KH560 in pulp suspension before the paper formation. Further, the effect of process conditions (temperature, time, the addition amount, and pulp concentration) on the strength and hydrophobicity of paper network structure was investigated, after adding PEI-KH560 into the pulp suspension. It was of great significance for studying the mechanism between the chemical structures of PEI-KH560 and paper performance, which provided valuable theoretical practice on the preparation of novel strength agent., Competing Interests: Declaration of competing interest The authors declare that they have no known competing interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Phenolic resins are widely used for outdoor and structural wood-based panels; however, they are challenged by high curing temperatures, low curing rates, and high brittleness. Inspired by lobster epidermis hardening, a tough, strong, and fast-curing phenolic resin (named DCS/PG/PF) was proposed herein. In this approach, dopamine-grafted chitosan (DCS) and polyethyleneimine-functionalized graphene (PEI@G) were incorporated into neat phenol formaldehyde (PF) resin. The gel time and maximum curing temperature of DCS/PG/PF resin were considerably reduced from 445 s and 147.8 °C for the neat PF resin to 317 s and 127.8 °C, respectively. This was attributed to the oxidative crosslinking of catechol moieties in DCS and amino groups in PEI@G within the naturally alkaline environment of phenolic resins in addition to the high reactivity between catechol moieties and PF chains as well as between amino and PF chains. The prepared resin demonstrated a dry bonding strength of 2.56 MPa, wet bonding strength of 1.81 MPa, and debonding work of 0.714 J, exhibiting a considerable increase of 16.9 %, 52.1 %, and 95.1 %, respectively, compared with those of the PF resin. These improvements were attributed to the dense organic-inorganic hybrid crosslinking network formed in the DCS/PG/PF. Furthermore, the DCS/PG/PF resin exhibited enhanced thermal stability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Uranium extraction from seawater (UES) has important strategic significance for maintaining the sustainable development of nuclear energy. This article presents the preparation of a low-cost, efficient, and highly reusable biosorbent sodium alginate/polyethyleneimine (SA/PEI) through a simple one-step crosslinking process. The chemical crosslinking between PEI and SA provides biosorbent excellent mechanical strength and thermal stability. SA/PEI was characterized by using FTIR, XRD, TGA, EDS, XPS, SEM before and after adsorption of uranium. Thermodynamic research results show that the uranium adsorption of SA/PEI is a spontaneous, entropy increasing endothermic process. The adsorption fitted the pseudo-second-order kinetic model and Langmuir model with maximum adsorption capacity reach 353.09 mg g -1 , illustrating that the adsorption mechanism is monolayer chemical adsorption. The interaction between SA/PEI and uranium is synergistic chelation by amino and carboxyl, which is consistent with the results calculated by DFT. After 14 days of adsorption in 100 L natural seawater, the adsorption capacity of SA/PEI was 3.58 mg g -1 , with an average adsorption efficiency of 0.256 mg g -1  day -1 , which is faster than most reported alginate adsorbents. The cost of using SA/PEI to UES is $168 per kilogram of uranium. These results indicate that SA/PEI hydrogel has great potential in practical seawater application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study aims to develop sorafenib-loaded self-assembled nanoparticles (SFB-SANPs) using the combined approach of artificial neural network and design of experiments (ANN-DoE) and to compare it with other machine learning (ML) models. The central composite design (CCD) and ML algorithms were used to screen the effects of concentrations of both the polymers (polyethyleneimine and fucoidan) on the outcome responses, i.e., particle size and entrapment efficiency with defined constraints. The prediction from different ML models (bootstrap forest, K-nearest neighbors, artificial neural network, generalized regression-lasso and support vector machines) were compared with ANN-DoE model. The ANN-DoE model showed better accuracy and predictability and outperformed all the other models. This depicted that the concept of using ANN and DoE combination approach provided the best, uncomplicated and cost-effective way to optimized the nanoformulations. The optimized formulation generated from the ANN-DoE combined model was further evaluated for characterization and anticancer activity. The optimized SFB-SANPs were prepared using the polyelectrolyte complexation method with Polyethyleneimine (PEI) as a cationic polymer and fucoidan (FCD) as an anionic. The SFB-SANPs were nanometric in size (280.4 ± 0.089 nm) and slightly anionic in nature (zeta potential = -6.03 ± 0.92 mV) with an encapsulation efficiency of 95.56 ± 0.30 %. The drug release from SFB-SANPs was controlled and sustained in the cancer microenvironment (pH 5.0). The SFB-SANPs were compatible with red blood cells (RBCs), and the % hemolysis was found to be <5.0 %. The anticancer activity of the SFB-SANPs exhibited an IC 50 at 2.017 ± 0.516 μM against MDMB-231 cells, showing a significantly high inhibitory effect on breast cancer cell lines. Therefore, the nanocarriers developed using various ML tools inherit a huge promise in anticancer drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The swelling and collapse of responsive nanogels on a planar lipid bilayer are studied by means of mesoscopic computer simulations. The effects of molecular weight, cross-linking density, and adhesion strength are examined. The conditions for collapse-mediated engulfing by the bilayer are found. In particular, the results show that at low hydrophobicity level the increase in the nanogel softness decreases the engulfing rate. On the contrary, for stronger hydrophobicity level the trend changes to the opposite one. At the same time, when the cross-linking density is too low or the adhesion strength is too high the nanogel deformation at the membrane suppresses the engulfing regardless of the network swelling ratio. Finally, for comparative reasons, the behavior of the nanogels is also studied at the solid surface. These results may be useful in the design of soft particles capable of tuning of their elasticity and porosity for successful intracellular drug delivery., (© 2024 Wiley‐VCH GmbH.)

Although membrane technology has demonstrated outstanding pathogen removal capabilities, current commercial membranes are insufficient for removing small viruses at trace levels due to certain limitations. The theoretical and practical significance of developing a new form of hydrophilic, anti-fouling, and virus-specific ultra-purification membrane with high capturing and separation efficiency, stability, and throughput for water treatment is of the utmost importance. In this study, molecularly imprinted membranes (MIMs) were fabricated from polyvinylidene fluoride (PVDF) membranes utilizing novel surface hydrophilic modification techniques, followed by the immobilization of virus-specific molecularly imprinted nanoparticles (nanoMIPs) as synthetic receptors. Three distinct membrane functionalization strategies were established and optimized for the first time: membrane functionalization with (i) polyethyleneimine (PEI) and dopamine (DOP), (ii) PEI and 3-(chloropropyl)-trimethoxysilane (CTS), and (iii) chitosan (CS). Hydrophilicity was enhanced significantly as a result of these modification strategies. Additionally, the modifications enabled spacer arms between the membrane surface and the nanoMIPs to decrease steric hindrance. The surface chemistry, morphology, and membrane performance results from the characterization analysis of the MIMs demonstrated excellent hydrophilicity (e.g., the functionalized membrane presented 37.84° while the unmodified bare membrane exhibited 128.94° of water contact angle), higher permeation flux (145.96 L m -2  h -1 for the functionalized membrane), excellent uptake capacity (up to 99.99 % for PEI-DOP-MIM and CS-MIM), and recovery (more than 80 % for PEI-DOP-MIM). As proof of concept, the cutting-edge MIMs were able to eliminate the model adenoviruses up to 99.99 % from water. The findings indicate that the novel functionalized PVDF membranes hold promise for implementation in practical applications for virus capture and separation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Protein-based drugs offer advantages, such as high specificity, low toxicity, and minimal side effects compared to small molecule drugs. However, delivery of proteins to target tissues or cells remains challenging due to the instability, diverse structures, charges, and molecular weights of proteins. Polymers have emerged as a leading choice for designing effective protein delivery systems, but identifying a suitable polymer for a given protein is complicated by the complexity of both proteins and polymers. To address this challenge, a fluorescence-based high-throughput screening platform called ProMatch to efficiently collect data on protein-polymer interactions, followed by in vivo and in vitro experiments with rational design is developed. Using this approach to streamline polymer selection for targeted protein delivery, candidate polymers from commercially available options are identified and a polyhexamethylene biguanide (PHMB)-based system for delivering proteins to white adipose tissue as a treatment for obesity is developed. A branched polyethylenimine (bPEI)-based system for neuron-specific protein delivery to stimulate optic nerve regeneration is also developed. The high-throughput screening methodology expedites identification of promising polymer candidates for tissue-specific protein delivery systems, thereby providing a platform to develop innovative protein-based therapeutics., (© 2024 Wiley‐VCH GmbH.)

Induced pluripotent stem cell (iPSC) technology, in combination with electrophysiological characterization via multielectrode array (MEA), has facilitated the utilization of iPSC-derived motor neurons (iPSC-MNs) as highly valuable models for underpinning pathogenic mechanisms and developing novel therapeutic interventions for motor neuron diseases (MNDs). However, the challenge of MN adherence to the MEA plate and the heterogeneity presented in iPSC-derived cultures raise concerns about the reproducibility of the findings obtained from these cellular models. We discovered that one novel factor modulating the electrophysiological activity of iPSC-MNs is the extracellular matrix (ECM) used in the coating to support in vitro growth, differentiation and maturation of iPSC-MNs. The current study showed that two coating conditions, namely, Poly-L-ornithine/Matrigel (POM) and Polyethyleneimine (PEI) strongly promoted attachment of iPSC-MNs on MEA culture dishes compared to three other coating conditions, and both facilitated the maturation of iPSC-MNs as characterized by the detection of extensive electrophysiological activities from the MEA plates. POM coating accelerated the maturation of the iPSC-MNs for up to 5 weeks, which suits modeling of neurodevelopmental disorders. However, the application of PEI resulted in more even distribution of the MNs on the culture dish and reduced variability of electrophysiological signals from the iPSC-MNs in 7-week cultures, which permitted the detection of enhanced excitability in iPSC-MNs from patients with amyotrophic lateral sclerosis (ALS). This study provides a comprehensive comparison of five coating conditions and offers POM and PEI as favorable coatings for in vitro modeling of neurodevelopmental and neurodegenerative disorders, respectively., (© 2024. The Author(s).)

Love-mode surface acoustic wave (SAW) sensors show great promise for biodetection applications owing to their low cost, digital output, and wireless passive capability, but their performance is often restricted by the availability of suitable sensitive membrane layers. Herein, a composite layer of electrospun fibers made from cellulose acetate and polyethylenimine, coated with gold nanoparticles, is proposed as a porous and sensitive membrane coated onto a love-mode SAW biosensor for monitoring gene sequences of Staphylococcus aureus . The results showed that the developed sensor exhibited an impressive sensitivity of 122.56 Hz/(nmol/L) for detecting gene sequences of S. aureus , surpassing the sensitivity of conventional SAW sensors employing a bare Au film as the sensitive layer by 5-fold. The analysis revealed a remarkably linear detection (R 2 of 0.97827) of S. aureus gene sequences within the range of 0 to 100 nmol/L. The limit of detection was impressively low at 0.9116 nmol/L. The good stability and specificity of the biosensor in liquid environments were demonstrated for clinical diagnostics.

Screening of acetylcholinesterase (AChE) inhibitors is a common strategy in drug discovery for treating Alzheimer's disease. Herein, AChE was immobilized onto magnetic polyethyleneimine-based MXene aerogels through both electrostatic interactions and covalent bonds, enabling its application in AChE activity assays and inhibitor screening of herbal plants. The composite was analyzed using a range of techniques, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and Zeta potential analysis, to gain insight into its chemical and physical properties. The proposed Fe 3 O 4 @MXene@PEI-AChE composite exhibited enhanced temperature and pH stability, as evaluated by Ellman's method, along with good reusability. The Michaelis Menten constant (K m ) of the immobilized AChE was calculated to be 0.68 mmol/L. Additionally, an inhibition kinetic study was conducted to verify the feasibility of utilizing the immobilized enzyme to screen for inhibitors, with huperzine A employed as a model inhibitor. The proposed strategy was employed to compare the AChE inhibitory activity of 18 commonly used herbal medicines for treating AD, revealing both the aqueous and alcoholic extracts of Coptis chinensis as exhibiting the highest AChE inhibitory activity. Finally, the screening of AChE inhibitors in Coptis chinensis extracts were conducted by combining the proposed strategy with UPLC-Q-Orbitrap high resolution mass spectrometry. This study presents a feasible strategy for monitoring AChE activity and holds considerable potential for further exploration of AChE-inhibiting active ingredients in herbal medicines., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Breast cancer is one of the most common cancers in women. One of the best therapeutic methods against breast cancer is gene therapy, while having an appropriate gene carrier is the biggest challenge of gene therapy. Hence, developing carriers with low cytotoxicity and high gene transfection efficiency, and preferentially with the selective function of gene delivery is a critical demand for this method. In the present study, we introduce a novel targeted carrier to deliver the inducible caspase-9 suicide gene (pLVSIN-iC9) into breast cancer cells. The carrier is composed of graphene oxide quantum dots decorated with polyethyleneimine, and S2.2; an aptamer with high affinity to MUC1 (GOQD-PEI/S2.2). Due to the overexpression of MUC1 in breast cancer cells, the designed GOQD-PEI/S2.2/pLVSIN-iC9 can selectively target cancer cells. Moreover, to better mimic solid tumor conditions, and to evaluate the selective effect of the GOQD-PEI/S2.2/pLVSIN-iC9, an organoid model derived from human dermal fibroblasts (HDF) and MCF-7 cells (coculture organoid) was generated and characterized. The results demonstrate that the coculture organoid model adapts the tissue structure of luminal breast cancer, as well. Therefore, the organoids were subjected to treatment with targeted gene therapy using GOQD-PEI/S2.2/pLVSIN-iC9. Our evidence supports the targeted killing effect of iC9 on the breast cancer cells of the organoids and suggests the good potential of the newly introduced carriers in targeted gene delivery., (© 2024. The Author(s).)

Traditional adhesive hydrogels perform well in tissue adhesion but they fail to prevent postoperative tissue adhesion. To address this challenge, a biodegradable Janus adhesive hydrogel (J-AH) was designed and fabricated by the assembly of three different functional layers including anti-adhesive layer, reinforceable layer, and wet tissue adhesive layer. Each layer of J-AH serves a specific function: the top zwitterionic polymeric anti-adhesive layer shows superior resistance to cell/protein and tissue adhesion; the middle poly(vinyl alcohol)/tannic acid reinforceable matrix layer endows the hydrogel with good mechanical toughness of ∼2.700 MJ/m 3 ; the bottom poly(acrylic acid)/polyethyleneimine adhesive layer imparts tough adhesion (∼382.93 J/m 2 of interfacial toughness) to wet tissues. In the rat liver and femoral injury models, J-AH could firmly adhere to the bleeding tissues to seal the wounds and exhibit impressive hemostatic efficiency. Moreover, in the in vivo adhesion/anti-adhesion assay of J-AH between the defected cecum and peritoneal walls, the top anti-adhesive layer can effectively inhibit undesired postoperative abdominal adhesion and inflammatory reaction. Therefore, this research may present a new strategy for the design of advanced bio-absorbable Janus adhesive hydrogels with multi-functions including tissue adhesion, anti-postoperative adhesion and biodegradation. STATEMENT OF SIGNIFICANCE: Despite many adhesive hydrogels with tough tissue adhesion capability have been reported, their proclivity for undesired postoperative adhesion remains a serious problem. The postoperative adhesion may lead to major complications and even endanger the lives of patients. The injectable hydrogels can cover the irregular wound and suppress the formation of postoperative adhesion. However, due to the lack of adhesive properties with tissue, it is difficult for the hydrogels to maintain on the wound surface, resulting in poor anti-postoperative adhesion effect. Herein, we design a Janus adhesive hydrogel (J-AH). J-AH integrates together robust wet tissue adhesion and anti-postoperative adhesion. Therefore, this research may present a new strategy for the design of advanced bio-absorbable Janus adhesive hydrogels., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Alginates are marine polysaccharides known for their ability to selectively bind calcium ions and form hydrogels. They are widely used in biomedical applications but are challenging to produce as nanogels. Here we introduce a self-assembly route to create stable alginate-based nanogels under near-equilibrium conditions. Guluronate (G) blocks, which interact with divalent cations such as Ca 2+ , Ba 2+ , and Sr 2+ , were extracted from alginates and covalently linked through their reducing end to the reducing end of dextran (Dex) chains, forming linear block copolymers that self-assemble into micellar nanogels with a core-corona structure in the presence of these ions. Real-time dynamic light scattering (DLS) and small-angle neutron scattering (SANS) were used to study the self-assembly mechanism of the copolymer during dialysis against divalent ions. For the G 12 - b -Dex 51 copolymer, we achieved spherical micelles with an 8 nm radius and an aggregation number of around 20. Although the type of divalent cation affected micelle stability, it did not influence their size. Micellar nanogels are dynamic structures, capable of ion exchange, and can disassemble with chelating agents like ethylenediamine tetraacetic acid (EDTA).

Respiratory syncytial virus (RSV) is one of the most significant pathogenic infections in childhood, associated with high morbidity and mortality rates. Currently, there is no effective and safe drug or vaccine available for RSV. Glycyrrhizic acid (GA), an active compound derived from the natural herb licorice, has been reported to provide protection against influenza and coronaviruses, exhibiting notable antiviral and anti-inflammatory properties. Ephedrine (EPH) is a commonly prescribed medication for the treatment of cough and asthma, and it also demonstrates certain antiviral effects. In this study, EPH and GA were combined to form an efficient nanomaterial (EPH-GA nanogel). The self-assembly of this nanogel is driven by hydrogen bonding and hydrophobic interactions, allowing it to serve as an antiviral nanomedicine without the need for a dual-component carrier, achieving a 100% drug loading efficiency. Oral administration of the EPH-GA nanogel significantly reduced viral load in the lungs of mice and improved lung lesions and tissue infiltration caused by RSV. Notably, we discovered that the assembled drug may create a "physical barrier" that prevents RSV from adsorbing to host cells, while free GA and EPH may compete with RSV for protein binding sites, thereby enhancing cellular uptake of EPH. Consequently, this prevents RSV infection and proliferation within host cells. Furthermore, the EC 50 values changed from 310.83 μM for EPH and 262.88 μM for GA to 68.25 μM for the EPH-GA combination, with a combination index of 0.458. In addition, the in vivo biopharmaceutic process of GA and EPH was investigated, revealing that the oral administration of EPH-GA significantly increased the bioavailability of EPH while maintaining its plasma concentration at a relatively stable level. This enhancement may contribute to a synergistic antiviral effect when combined with GA. Furthermore, the in vivo process of EPH-GA demonstrates the advantage of delivering the drug to the lesion at elevated levels, thereby facilitating its antiviral mechanism at the cellular level. In this study, we identified an effective nanomedicine, EPH-GA nanogel, which can inhibit the proliferation of RSV and mitigate lung lesions resulting from viral infection by influencing the biopharmaceutical process in vivo. This research not only offers a novel strategy for the nanomedicine treatment of RSV but also elucidates, to some extent, the compatibility mechanisms of the multicomponents of traditional Chinese medicine.

Focused ultrasound ablation surgery (FUAS) is a minimally invasive treatment option that has been utilized in various tumors. However, its clinical advancement has been hindered by issues such as low safety and efficiency, single image guidance mode, and postoperative tumor residue. To address these limitations, this study aimed to develop a novel multi-functional gas-producing engineering bacteria biological targeting cooperative system. Pulse-focused ultrasound (PFUS) could adjust the ratio of thermal effect to non-thermal effect by adjusting the duty cycle, and improve the safety and effectiveness of treatment.The genetic modification of Escherichia coli (E.coli) involved the insertion of an acoustic reporter gene to encode gas vesicles (GVs), resulting in gas-producing E.coli (GVs-E.coli) capable of targeting tumor anoxia. GVs-E.coli colonized and proliferated within the tumor while the GVs facilitated ultrasound imaging and cooperative PFUS. Additionally, multifunctional cationic polyethyleneimine (PEI)-poly (lactic-co-glycolic acid) (PLGA) nanoparticles (PEI-PLGA/EPI/PFH@Fe 3 O 4 ) containing superparamagnetic iron oxide (SPIO, Fe 3 O 4 ), perfluorohexane (PFH), and epirubicin (EPI) were developed. These nanoparticles offered synergistic PFUS, supplementary chemotherapy, and multimodal imaging capabilities.GVs-E.coli effectively directed the PEI-PLGA/EPI/PFH@Fe 3 O 4 to accumulate within the tumor target area by means of electrostatic adsorption, resulting in a synergistic therapeutic impact on tumor eradication.In conclusion, GVs-E.coli-mediated multi-functional nanoparticles can synergize with PFUS and chemotherapy to effectively treat tumors, overcoming the limitations of current FUAS therapy and improving safety and efficacy. This approach presents a promising new strategy for tumor therapy., (© 2024. The Author(s).)

A self-cleavable DNA nanogel loaded with splice-switch oligonucleotide (SSO) has been developed. Under acidic conditions (pH 5.0), cleavage of the acid-labile chemical linker and generation of the i-motif structure led to the disintegration of the DNA nanogel and efficient release of SSO in its unaltered native state.

Developing monolithic materials for chromatography columns with a novel interconnected porous structure is vital for the enhancement of the separation efficiency of RNA purification processes. Herein, a porous nanofibrous sponge (PNFS) is constructed by freeze molding and freeze-drying a nanofiber dispersion with ethylene vinyl alcohol copolymer nanofibers as the skeleton, chitosan (CS) and polyethylenimine (PEI) as the binders, and glutaraldehyde (GA) as the crosslinking agent. The results show that when the CS content of the dispersion is 1.5 wt %, PNFS demonstrates a high static adsorption capacity of 406.5 mg/g (30.7 mg/m 2 ) and a dynamic adsorption capacity of 382.6 mg/g (28.9 mg/m 2 ) at a flow rate of 1 mm/min. Moreover, PNFS shows a high specific adsorption performance toward RNA in the presence of bovine serum albumin, lecithin, or DNA by adjusting the solution pH value and the method of gradient elution. Besides, PNFS presents exceptional performance in the rapid separation of RNA from HT22 cells without degradation. This result can be attributed to optimized morphology, pore structure, and comprehensive performance of PNFS, benefiting from the synergistic effect of the highly oriented porous structure and CS-PEI interaction derived from the high-density adsorption ligands on the channel walls of PNFS. This work provided an efficient strategy to handle the permeability/adsorptivity trade-off for ion-exchange chromatographic materials.

In the process of tumor metastasis, tumor cells can acquire invasion by excessive uptake of nutrients and energy and interact with the host microenvironment to shape a premetastatic niche (PMN) that facilitates their colonization and progression in the distal sites. Pyruvate is an essential nutrient that engages in both energy metabolism and remodeling of the extracellular matrix (ECM) in the lungs for PMN formation, thus providing a target for tumor metastasis treatment. There is a paucity of strategies focusing on PMN prevention, which is key to metastasis inhibition. Here, we design a bioresponsive nanoparticle (HP/GU) based on a disulfide-cross-linked hyperbranched polyethylenimine (D-PEI) core and a hyaluronic acid (HA) shell with a reactive oxygen species (ROS)-sensitive cross-linker between them to encapsulate glucose oxidase (GOX) and a mitochondrial pyruvate carrier (MPC) inhibitor via electrostatic interaction, which reinforces starvation therapy and reduces PMN formation in the lungs via inhibiting pyruvate metabolism. In tumor cells, GOX and MPC inhibitors can be rapidly released and synergistically reduce the energy supply of tumor cells by consuming glucose and inhibiting pyruvate uptake to decrease tumor cell invasion. MPC inhibitors can also reduce ECM remodeling by blocking cellular pyruvate metabolism to prevent PMN formation. Consequently, HP/GU achieves an efficient inhibition of both primary and metastatic tumors and provides an innovative strategy for the treatment of tumor metastases.

Stockpiled coke is prone to wind-blowing emissions, leading to economic losses and environmental pollution which imposes severe threats to human health. While various polysaccharide-based dust suppressants have been explored to resolve this issue, they often suffer from ineffective control of wettability, poor coverage, and suppression effect in extreme weather conditions, and require additional use of cross-linking agents and surfactants due to their weak interaction with coke. Herein, we present coke dust suppressants comprising polyethyleneimine (PEI), starch, and glycerol to address these shortcomings. Our detailed investigations show that the low toxicity, cationic polymer (PEI) electrostatically interacts with the coke, increasing the wettability and promoting aggregation. Moreover, PEI hydrogen-bonds with starch to form a stable film and enhances the water-retention capability. Furthermore, the addition of glycerol lowers the freezing point to -13 °C, preventing coke loss caused by freezing during transportation and energy loss associated with dismantling the frozen coke. Wind erosion tests and bomb calorimeter results reveal that the coke dust suppressant exhibits superior wind resistance and does not interfere with the coke combustion., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Hyomin Lee reports financial support was provided by National Research Foundation of Korea. Hyomin Lee reports financial support was provided by Korea Green Material Co., Ltd. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Melanoma is the main cause of death among skin cancers and its incidence worldwide has been experiencing an appalling increase. However, traditional treatments lack effectiveness in advanced or metastatic patients. Immunotherapy, meanwhile, has been shown to be an effective treatment option, but the rate of cancers responding remains far from ideal. Here we have developed a personalized neoantigen peptide-based cancer vaccine by encapsulating patient derived melanoma neoantigens in polyethylenimine (PEI)-functionalised poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) and coating them with polyinosinic:polycytidylic acid (poly(I:C)). We found that PLGA NPs can be effectively modified to be coated with the immunoadjuvant poly(I:C), as well as to encapsulate neoantigens. In addition, we found that both dendritic cells (DCs) and lymphocytes were effectively stimulated. Moreover, the developed NP was found to have a better immune activation profile than NP without poly(I:C) or without antigen. Our results demonstrate that the developed vaccine has a high capacity to activate the immune system, efficiently maturing DCs to present the antigen of choice and promoting the activity of lymphocytes to exert their cytotoxic function. Therefore, the immune response generated is optimal and specific for the elimination of melanoma tumour cells., (© 2024. The Author(s).)

Metal-organic frameworks (MOFs) have the potential to efficiently carry cargo due to their excellent porosity and high surface area. Nevertheless, conventional MOFs and their derivatives exhibit low efficiency in transporting nucleic acids and other small molecules, as well as having poor colloidal stability. In this study, a ZIF-90 loaded with iron oxide nanoparticles and Au nanorods was prepared, and then surface-functionalized with polyethyleneimine (PEI) to create a multifunctional nanocomposite (AFZP25k) with pH, photothermal, and magnetic responsiveness. AFZP25k can condense plasmid DNA to form AFZP25k/DNA complexes, with a maximum binding efficiency of 92.85 %. DNA release assay showed significant light and pH responsiveness, with over 80 % cumulative release after 6 h of incubation. When an external magnetic field is applied, the cellular uptake efficiency in HeLa cells reached 81.51 %, with low cytotoxicity and specific distribution. In vitro transfection experiments demonstrated a gene transfection efficiency of 44.77 % in HeLa cells. Following near-infrared irradiation, the uptake efficiency and transfection efficiency of AFZP25k in HeLa cells increased by 21.3 % and 13.59 % respectively. The findings indicate the potential of AFZP25k as an efficient and targeted gene delivery vector in cancer gene therapy., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled, “Construction of intelligent response gene vector based on MOF/Fe3O4/AuNRs for tumor-targeted gene delivery”., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Inspired by the synthesis of polyurethane, a multifunctional fabric with hydrophobic and long-lasting flame retardancy was prepared through the phase separation and interfacial reaction process between PEI (polyethyleneimine)/BX (borax) aqueous solution and isocyanate terminated polydimethylsiloxane (PDMS-NCO) in tetrahydrofuran solution. The limit oxygen index of the treated fabric increased from 18.0 % to 33.7 %, and the total heat release decreased by 34.2 %. The enhancement of flame retardant performance and thermal stability is attributed to the enhanced char-forming capacity. After 50 cycles of water washing, the cotton fabric can still pass the vertical flammability test because of the curing effect of PDMS-NCO on functional additives. Furthermore, SEM analysis revealed that the formation of nano-rough structures on the fibers was promoted by phase separation, thus leading an increased water contact angle of sample to 139°. The materials utilized in this modified process do not contain elements such as F, Cl, Br, and P, indicating its potential as an environmentally friendly methodology for fabric functionalization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. All the authors listed have approved the manuscript enclosed., (Copyright © 2024. Published by Elsevier B.V.)

The basis of most neurological syndromes is the accumulation of free radical molecules. Quercetin is a polyphenolic bioflavonoid molecule and it has a very strong antioxidant effect by maintaining oxidative balance. There are many difficulties in the clinical use of quercetin due to its hydrophobic structure, low solubility, instability, poor oral bioavailability, and limited tissue-barrier penetration. Its synergistic use in complex with gold nanoparticles (AuNPs) could overcome these problems. AuNPs have recently emerged as an attractive candidate for delivery applications of various biomolecules and drugs. The aim of this study was to synthesize two different sized gold nanoparticles (AuNP 20 and AuNP 50 ) modified with polyethyleneimine (PEI) and quercetin, evaluate their potential neuroprotective effects on the in vitro oxidative stress model using DRG primary sensory neurons. It was shown that the antioxidant and anti-apoptotic ability of the bioflavonoid was preserved after exposure to the designed quercetin modified AuNPs. The PEI surface coating increased the stability and biocompatibility of the AuNPs in both sizes. It also potentially enables additional surface functionalization. This study indicates that designed nanoparticles (AuNP-Q-PEI) with different sizes could be a useful potential platform for the treatment of neurodegenerative syndromes or cancer diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Dyes are indispensable for the rapid development of society, but untreated dye wastewater can threaten human health. In this study, an adsorbent (SA/SL/CCS/PEI@MNPs) was synthesized by one-pot method using magnetic nanoparticles (MNPs), sodium alginate (SA), sodium lignosulfonate (SL), carboxylated chitosan (CCS) and polyethyleneimine (PEI). The adsorbent was mesoporous micrometer-sized particles with pore size of 34.92 nm, which was favorable for dynamic column experiments. SA/SL/CCS/PEI@MNPs possessed pH-responsive performance. Under acidic condition, the maximum adsorption capacities for anionic dyes (tartrazine, reactive black-5, indigo carmine) reached >550 mg/g. Under alkaline condition, those for cationic dyes (methylene blue, methyl violet, neutral red) exceeded 1900 mg/g. The function of the various modifiers was investigated. The results indicated that the incorporation of SL, CCS and PEI was able to provide plenty of sulfonate, carboxylate and amino/imine reactive groups so that adsorption capacities of dyes were improved. The adsorption mechanism was explored by FTIR and XPS. At the same time, the adsorption mechanism was more deeply analyzed using molecular dynamics simulations and radial distribution function. It was demonstrated that the dyes adsorption on the SA/SL/CCS/PEI@MNPs was mainly due to electrostatic attraction and π-π interaction. In addition, the adsorbent had good reusability, and the removal still reached over 90 % after five cycles. In conclusion, the adsorbent displayed a broad prospect for the adsorption of organic dyes., Competing Interests: Declaration of competing interest There are no conflicts of interest., (Copyright © 2024. Published by Elsevier B.V.)

Peptides are used for diagnostics, therapeutics, and as antimicrobial agents. Most peptides are produced by chemical synthesis, but recombinant production has recently become an attractive alternative due to the advantages of high titers, less toxic waste and correct folding of tertiary structure. Somatostatin-28 is a peptide hormone that regulates the endocrine system, cell proliferation and inhibits the release of numerous secondary hormones in human body. It is composed of 28 amino acids and has one disulfide bond, which makes it to an optimal model peptide for a whole downstream purification process. We produced the peptide in the periplasm of E. coli using the CASPON™ technology, an affinity fusion technology system that enables high soluble expression of recombinant proteins and cleaves the fusion tag with a circularly permuted human caspase-2. Furthermore, purification of the products is straight forward using an established platform process. Two different case studies for downstream purification are presented, starting with either hydrochloric acid or polyethyleneimine as an extraction aid. After release of affinity-tagged somatostatin-28 out of E. coli's periplasm, several purification steps were performed, delivering a pure peptide solution after the final polishing step. The process was monitored by reversed-phase high-performance liquid chromatography as well as mass spectrometry to determine the yield and correct disulfide bond formation. Monitoring of impurities like host cell proteins, DNA and endotoxins after each downstream unit confirmed effective removal for both purification pathways., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Gene transfection, which involves introducing nucleic acids into cells, is a pivotal technology in the life sciences and medical fields, particularly in gene therapy. Surface-mediated transfection, primarily targeting cells adhering to surfaces, shows promise for enhancing cell transfection by localizing and presenting surface-bound nucleic acids directly to the cells. However, optimizing endocytosis for efficient delivery remains a persistent challenge. Additionally, ensuring efficient and non-traumatic cell harvest capability is crucial for applications such as ex vivo cell-based therapy. To address these challenges, we developed a photothermal platform with enzymatic degradation capability for efficient gene transfection and cell harvest. This platform is based on carbon nanotubes (CNTs) doped with poly(dimethylsiloxane) and modified with polyelectrolyte multilayers (PEMs) containing hyaluronic acid and quaternized chitosan, allowing for substantial loading of poly(ethyleneimine)/plasmid DNA (pDNA) complexes through electrostatic interactions. Upon irradiation of near-infrared laser, the photothermal properties of CNTs enable high transfection efficiency by delivering pDNA into attached cells via a membrane disruption mechanism. The engineered cells can be harvested by treating with a non-toxic hyaluronidase solution to degrade PEMs, thus maintaining good viability for further applications. This platform has demonstrated remarkable efficacy across various cell lines (including Hep-G2 cells, Ramos cells and primary T cells), achieving a transfection efficiency exceeding 95 %, cell viability exceeding 90 %, and release efficiency surpassing 95 %, highlighting its potential for engineering living cells., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Despite the plethora of methods reported for fabricating ultraviolet (UV) shielding films using various UV absorbers to date, it remains a major challenge for the development of novel UV shielding films that simultaneously exhibit excellent transparency. In this work, a novel composite film (GA-x-CMC/PVA/PEI) is fabricated by integrating anionic carboxymethylcellulose (CMC), cationic polyethyleneimine (PEI), and polyvinyl alcohol (PVA) via electrostatic and hydrogen bond interactions and further cross-linking with glutaraldehyde (GA). Herein, PVA expands hydrogen bonding networks, reduces film haze, and enhances its mechanical strength. GA acts as a crosslinker in producing Schiff bases with PEI and acetals with CMC and PVA. The synthesized GA-x-CMC/PVA/PEI composite film possesses a notable amount of unsaturated -CH=N- bonds of Schiff base, resulting from the condensation of PEI and GA, which exhibit superior shielding efficiency against both UV-A and UV-B rays while maintaining exceptional transparency, visibility, and simultaneously enhancing mechanical properties and thermal stability. Notably, increasing the content of PEI leads to almost complete shielding of the entire UV spectrum (<400 nm) due to the increasing of the number of -CH=N- unsaturated bonds. Furthermore, the obtained film without any UV-shielding additives has exceptional mechanical properties, hydrophobicity, and antibacterial properties, rendering it a wide application prospect., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A polyethyleneimine capped silver nanoclusters (PEI-AgNCs) based turn-off-on fluorescence sensor has been developed to determine glutathione (GSH) effectively. The fluorescence intensity of silver nanoclusters (AgNCs) has been quenched by Cu(II) and recovered by adding GSH. The quenching of fluorescence intensity of PEI-AgNCs by Cu(II) and recovery of the emission intensity of PEI-AgNCs after the addition of GSH is supposed to be ground state adduct formation. Due to the greater affinity of Cu(II) towards GSH compared to that to PEI-AgNCs, the defragmentation of PEI-AgNCs-Cu(II) adduct occurs after the addition of GSH to the solution, resulting in the recovery of emission intensity of PEI-AgNCs. Characterisation studies of the probe have been done using FT-IR spectroscopy, XPS analysis, XRD analysis, UV-visible and Fluorescence spectrophotometry, EDX spectroscopy and TEM analysis. Different experimental parameters were optimised. Under optimised analytical conditions, the sensor showed a wide linear range for the quantification of GSH from 1.00 × 10 -4  M to 3.00 × 10 -6  M with a detection limit (LOD) of 8.00 × 10 -7  M. Selectivity and interference studies were done in the presence of different structurally similar and coexisting species of GSH in blood. The practical utility of the proposed sensor has been validated in artificial blood serum., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hyaluronic acid (HA) based nanogels showed effective intracellular delivery efficacy for anti-cancer and anti-inflammatory drugs, characterized by their ability targeting relevant cell receptors. In the present study, we demonstrate the ability of hyaluronic acid-polyethyleneimine (HA-PEI) nanogels as a promising dual-functional interfacial active for intra-articular injection to intervene arthritis. Nanomechanical measurements on both model substrates and human cartilage samples confirm that the HA-PEI nanogels can significantly improve interfacial lubrication, in comparison to HA molecules, or silica-based nanoparticles. We show that the Coefficient of Friction significantly decreases with a decreasing nanogel size. The exceptional lubricating performance, coupled with the proven drug delivery capability, evidences the great potential of nanoscopic hydrogels for early-stage arthritis treatment. The flexibility in choosing the chemical nature, molecular architecture, and structural characteristics of nanogels makes it possible to modulate both drug delivery kinetics and interfacial lubrication, thus representing an innovative approach to treat degenerative joint diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Patulin (PAT) is a highly toxic mycotoxin, which can contaminate fruits and their products and cause harm to human health. Cellulose nanocrystals (CNCs) were functionalized by magnetite nanoparticles, dopamine (DA) and polyethyleneimine (PEI) to form a multifunctional nanocarrier (DA/PEI@Fe 3 O 4 /CNCs) for immobilizing aldo-keto reductase (MgAKR) to degrade PAT. The MgAKR-DA/PEI@Fe 3 O 4 /CNCs were reusable and environmentally friendly due to its surface area, high magnetization value, and oxygen/amine function. The immobilization method significantly improved reusability, resistance to proteolysis, temperature stability and storage stability of MgAKR-DA/PEI@Fe 3 O 4 /CNCs. With NADPH as a coenzyme, the detoxification rate of MgAKR-DA/PEI@Fe 3 O 4 /CNCs on PAT reached 100 % in phosphate buffer and 98 % in fresh pear juice. The quality of fresh pear juice was unaffected by MgAKR-DA/PEI@Fe 3 O 4 /CNCs and could be quickly separated by magnet after detoxification, which was convenient for recycling. It has broad application prospects in the control of PAT contamination in beverage products containing fruit and vegetable ingredients., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Developing durable protective cotton fabrics (CF) against potential environmental dangers such as fire hazards and bacterial growth remains an imperative but tough challenge. In this study, flame retardant, antibacterial and hydrophobic CF were successfully prepared via two-step coating. The inner coating entailed polyelectrolyte complexes consisting of polyethyleneimine and ammonium polyphosphate with the goal of enhancing the flame retardancy of CF. Halloysite nanotubes (HNTs), a kind of tubular silicate mineral, were creatively modified and introduced to multifunctional coatings to improve flame retardant and antibacterial properties of CF. N-halamine modified HNTs (HNTs-EA-Cl) and polydimethylsiloxane were applied as the outer coating to endow CF with antibacterial and hydrophobic properties and further improve the flame retardancy of CF. After halloysite-based inorganic-organic hybrid coatings, the limiting oxygen index of the treated samples (PAHP-CF) was over 28 %, and the release of heat and smoke was significantly inhibited. PAHP-CF could inactivate 100 % E. coli and S. aureus within 2 h. More importantly, PAHP-CF showed excellent hydrophobicity with a water contact angle of 148° and exhibited great prevention of bacterial adhesion. PAHP-CF exhibited excellent washing durability undergoing 5 washing cycles. This study promotes the development of multifunctional coatings and offers a new way to manufacture multifunctional cotton fabrics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Brucella is a facultative intracellular gram-negative coccobacillus. It is nonsporulating and reproduced in macrophage phagosomes. The use of nanostructures as drug and vaccine carriers has recently received attention due to their ability to control the release profile and protect the drug molecules. This study presents a suitable nano-polyethyleneimine formulation to be used as an immunoadjuvant and LPS along with trivalent candidate antigens of TF, BP26, and omp31 to selectively stimulate the immune response. After designing and evaluating the immunogenic structure by databases and bioinformatics software, recombinant protein cloning and gene expression were performed in Escherichia coli BL21 bacteria. This protein was extracted from the cultured cells, purified by Ni-NTA column. After placing the antigen inside the polyethyleneimine nanostructure, various properties of the nanoparticles, including their size, zeta potential, and retention rate for injection and inhalation of mice, diffusion efficacy, and antigen binding evaluation were evaluated. Mice were treated with different groups of antigens and nanoparticles on days 0, 10, 24, and 38. Two weeks after the last injection, the level of cytokines were investigated in spleen cells, including IFN-γ, IL-4, and IL-12. The serum concentration of IgG2a and IgG1 antibodies were also assessed. The response was consistent with significant production of IgG1, IgG2a, IFN-γ21, IL-12, and IL-4 compared to the controls (P < 0.05). Compared to the positive and negative control groups, recombinant protein and nanoparticles showed a good response in subsequent injections with live bacterial strains. The present study also revealed the potential of the developed recombinant protein as a candidate in the design and manufacture of subunit vaccines against Brucella species. This protein stimulates cellular and humoral immune responses compared to the positive control groups. These findings can be useful in the prevention and control of brucellosis and pave the way for further research by researchers around the world., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The development of intelligent multifunctional nanopesticides featuring enhanced foliage affinity and hierarchical target release is increasingly pivotal in modern agriculture. In this study, a novel cationic amphiphilic comb-shaped polymer, termed PEI-TA, was prepared via a one-step Michael addition between low-molecular-weight biodegradable polyethylenimine (PEI) and tetradecyl acrylate (TA), followed by neutralization with acetic acid. Using the emulsifier PEI-TA, a positively charged avermectin (AVM) nanoemulsion was prepared via a phase inversion emulsification process. Under optimal formulation, the obtained AVM nanoemulsion (defined as AVM@PEI-TA) demonstrated exceptional properties, including small size (as low as 67.6 nm), high encapsulation efficiency (up to 87.96%), and high stability toward shearing, storage, dilution, and UV irradiation. The emulsifier endowed AVM@PEI-TA with a pronounced thixotropy, so that the droplets exhibited no splash and bounce when they were sprayed on the cabbage leaf. Owing to the electrostatic attraction between the emulsifier and the leaf, AVM@PEI-TA showed improved leaf adhesion, better deposition, and higher washing resistance in contrast to both its negatively charged counterpart and AVM emulsifiable concentrate (AVM-EC). Compared to the large-sized particles, the small-sized particles of the AVM nanoemulsion more effectively traveled long distances through the vascular system of veins after entering the leaf apoplast. Moreover, the nanoparticles lost stability when exposed to multidimensional stimuli, including pH, temperature, esterase, and ursolic acid individually or simultaneously, thereby promoting the release of AVM. The release mechanisms were discussed for understanding the important role of the emulsifier in nanopesticides.

Modern drug delivery research focuses on developing biodegradable nanopolymer systems. The present study proposed a polymer-based composite nanogel as a transdermal drug delivery system for the pH-responsive targeted and controlled delivery of anticancer drug doxorubicin (DOX). Nanogels have properties of both hydrogels and nanomaterials. The β-cyclodextrin-based nanogels can enhance the loading capacity of poorly soluble drugs and promote a sustained drug release. The β-cyclodextrin-grafted methacrylic acid conjugated hyaluronic acid composite nanogel was successfully synthesized. β-Cyclodextrin was first grafted onto methacrylic acid. The composite nanogel-based drug carrier was prepared by controlled radical polymerization (CRP) of β-cyclodextrin-grafted methacrylic acid with hyaluronic acid. The doxorubicin-loaded carrier was characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, zeta potential analysis, dynamic light scattering (DLS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The drug loading and release efficiencies were carried out at different pH levels. The maximum drug loading and encapsulation efficiencies of the synthesized final nanogel composite material at pH 8.0 were 86.44 ± 2.12 and 96.07 ± 2.01%, respectively. The DOX-loaded final material showed a 90.0 ± 2.6% release percentage of DOX at pH 5.5, whereas at pH 7.4, the release percentage of DOX was observed to be only 35.0 ± 0.3%. In vitro swelling, degradation, hemocompatibility, drug release kinetics, cytotoxicity, apoptosis, cell colocalization, skin irritation, and skin permeation studies, along with in vivo pharmacokinetic studies, were performed to prove the efficacy of the synthesized nanogel composite as a transdermal carrier for doxorubicin.

T lymphocyte therapies demonstrate significant promise in the treatment of cancer and infectious diseases. An efficient gene delivery system is essential for the safe and reliable introduction of exogenous genes, especially mRNA, into cells to achieve therapeutic purposes. Commercial transfection reagents are suitable for the transduction of plasmids to adherent cells, whereas they are ineffective for suspension cells such as T lymphocytes and for unstable mRNA. Moreover, the cytotoxicity of transfection reagents themselves constitutes an impediment to their application. The challenge of mRNA transduction to T lymphocytes with high efficiency is notably formidable. An innovative transfection strategy is urgently needed. In this study, we synthesized aminated glycogen (AGly) nanoparticles as gene vectors, encapsulating mRNA to facilitate the efficient transfection of T lymphocytes. Compared to commercial transfection reagent polyethylenimine (PEI), the AGly demonstrated favorable biocompatibility. The positive charge provided AGly with pH buffering ability and mRNA-binding capacity. AGly formed stable nanoparticles with mRNA, which were readily internalized by suspension cells and enhanced the cellular uptake of mRNA. In the T lymphocyte model cell lines (Jurkat cells and HuT 78 cells), AGly demonstrated superior transfection efficiency than that of PEI. Consequently, AGly can emerge as a viable mRNA vector for the efficient transfection of T lymphocytes whilst circumventing the issue of cytotoxicity. The AGly designed in this study provides a novel concept for the exploitation of transfection reagents and proposes a promising methodology for the proficient transfection of T lymphocytes which may significantly contribute to the treatment of cancer and other complex diseases., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Age-related macular degeneration (AMD) is an eye disorder that can lead to visual impairment in elder patients, and current treatments include repeated injections of monoclonal antibody-based antivascular endothelial growth factor (anti-VEGF) agents. This study investigates the potential of a nanoformulation of a peptide anti-VEGF molecule for neovascular AMD. Anti-VEGF peptide HRHTKQRHTALH (HRH), which has high affinity to VEGF-Fc receptor, was used as the bioactive agent to control neovascularization of the retina. The nanoformulation consisting of hyaluronic acid nanogel was generated by incorporating divinyl sulfone and cholesterol to increase the stability and control the size of the nanodrug. The encapsulation efficacy of nanogel was 65%, and drug release was 34.72% at the end of 192 h. Obtained nanogels were efficiently internalized in 15 min by human umbilical vascular endothelial cells (HUVECs) and ARPE-19 cells, and results indicate that nanoformulation is not toxic to ARPE-19 cells, whereas it inhibits HUVEC proliferation owing to anti-VEGF peptide in the nanogel structure. In the coculture experiment in which retinal penetration was modeled, it was observed that the nanogel reached HUVECs and negatively affected their proliferation without disturbing the monolayer of ARPE-19 cells. In vivo experiments with chick chorioallantoic membrane revealed that nanogel formulation has higher antiangiogenesis activity compared to free HRH. Additionally, in an oxygen-induced retinopathy model, the excessive growth of blood vessels was notably suppressed in mice treated with HRH-loaded nanogel. This research indicates that nanogels formulated in this study are promising candidates as a topical treatment for AMD.

Developing multifunctional materials for water treatment remains a significant challenge. Bacterial cellulose (BC) holds immense potential as an adsorbent with high pollutant-binding capacity, hydrophilicity, and biosafety. In this study, N-acetylglucosamine was used as a carbon source to ferment BC, incorporating amide bonds in situ. Bentonite, renowned for its adsorption properties, was added to the culture medium, resulting in BC-bentonite composite membranes via a one-step fermentation process. Polyethyleneimine (PEI) was crosslinked with amide bonds on the membrane via glutaraldehyde through Schiff base reactions to enhance the performance of the composite membrane. The obtained membrane exhibited increased hydrophilicity, enhanced active adsorption sites, and enlarged specific surface area. It not only physically adsorbed contaminants through its unique structure but also effectively captured dye molecules (Congo red, Methylene blue, Malachite green) via electrostatic interactions. Additionally, it formed stable complexes with metal ions (Cd²⁺, Pb²⁺, Cu²⁺) through coordination and effectively adsorbed their mixtures. Moreover, the composite membrane demonstrated the broad-spectrum antibacterial activity, effectively inhibiting the growth of tested bacteria. This study introduces an innovative method for fabricating composite membranes as adsorbents for complex water pollutants, showing significant potential for long-term wastewater treatment of organic dyes, heavy metal ions, and pathogens., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Guoqiang Li reports financial support was provided by Nankai University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

High molecular weight polyethylenimine (HMW PEI; branched 25 kDa PEI) has been widely investigated for gene delivery due to its high transfection efficiency. However, the toxicity and lack of targeting to specific cells have limited its clinical application. In the present investigation, L-3, 4-dihydroxyphenylalanine (L-DOPA) was conjugated on HMW PEI in order to target L-type amino acid transporter 1 (LAT-1) and modulate positive charge density on the surface of polymer/plasmid complexes (polyplexes). The results of biophysical characterization revealed that the PEI conjugates are able to form nanoparticles ≤ 180 nm with the zeta potential ranging from + 9.5-12.4 mV. These polyplexes could condense plasmid DNA and protect it against nuclease digestion at the carrier to plasmid ratios higher than 4. L-DOPA conjugated PEI derivatives were complexed with a plasmid encoding human interleukin-12 (hIL-12). Targeted polyplexes showed up to 2.5 fold higher transfection efficiency in 4T1 murine mammary cancer cell line, which expresses LAT-1, than 25 kDa PEI polyplexes prepared in the same manner. The cytotoxicity of these polyplexes was also substantially lower than the unmodified parent HMW PEI. These results support the use of L-3, 4-dihydroxyphenylalanine derivatives of PEI in any attempt to develop a LAT-1 targeted gene carrier., (© 2024. The Author(s).)

Hydrogel is widely used for the sustained delivery of bioactive molecules that can treat various injuries, diseases, and tissue defects. However, inserting hydrogel implants without disrupting their functionality and microstructure often requires a large incision, leading to potential complications, such as infection, scarring, and pain. The gel implant is often manually rolled and inserted through a catheter for a minimally invasive delivery. However, success heavily depends on the user's skills, which can inadvertently damage the implant. To address this issue, we developed a reconfigurable hydrogel patch that can self-fold into a small tube and unfold spontaneously after implantation through a catheter. The hydrogel path was assembled by layering a drug-releasing poly(ethylene glycol) diacrylate (PEGDA) hydrogel sheet onto a PEGDA and polyethylenimine (PEI) hydrogel sheet, which rapidly swells and degrades homogeneously at controlled rates. The dynamics of the self-folding and unfolding process could be controlled by differences in the expansion ratio and elastic modulus between the two gel layers according to a mathematical model that closely matched experimental results. The unfolding process triggered a sustained release of the protein cargo. Specifically, the reconfigurable gel loaded with angiopoietin 1 significantly enhanced neovascularization, nearly doubling the vascular density compared to the control group following implantation through a tube with 15% smaller diameter than the original shape of the gel patch. This gel biopatch will be broadly useful for the minimally invasive delivery of a wide array of therapeutic molecules, potentially enhancing therapeutic outcomes.

PEGylated branched polyethylenimine (PEG-BPEI) has antibacterial and antibiofilm properties. Exposure to PEG-BPEI through serial passage leads to resistant P. aeruginosa strains. The minimum inhibitory concentration (MIC) of 600 Da BPEI and PEGylated 600 Da BPEI (PEG-BPEI) in the wild-type PAO1 strain is 16 μg/ml while, after 15 serial passages, the MIC increased to 1024 μg/mL. An additional 15 rounds of serial passage in the absence of BPEI or PEG-BPEI did not change the 1024 μg/mL MIC. Gentamicin, Neomycin, and Tobramycin, cationic antibiotics that inhibit protein synthesis, have a 16-32 fold reduction of MIC values in PEG350-BPEI resistant strains, suggesting increased permeation. The influx of these antibiotics occurs using a self-mediated uptake mechanism, suggesting changes to the outer membrane Data show that resistance causes changes in genes related to outer membrane lipopolysaccharide (LPS) assembly. Mutations were noted in the gene coding for the polymerase Wzy that participates in the assembly of the O-antigen region. Other mutations were noted with wbpE and wbpI of the Wbp pathway responsible for the enzymatic synthesis of ManNAc(3NAc)A in the LPS of P. aeruginosa. These changes suggest that an altered gene product could lead to PEG-BPEI resistance. Nevertheless, the increased susceptibility to aminoglycosides could prevent the emergence of PEG-BPEI resistant bacterial populations., (© 2024 Wiley-VCH GmbH.)

The ubiquitous mold Aspergillus fumigatus (A. fumigatus) is one of the main fungal pathogens causing invasive infections in immunocompromised humans. Conventional antifungal agents exhibit limited efficacy and often cause severe side effects. Nanoparticle-based antifungal delivery provides a promising alternative, which can increase local drug concentration; while, mitigating toxicity, thereby enhancing treatment efficacy. Previous research underscores the potential of poly(glycidol)-based nanogels (NG) with negative surface charge as carriers for delivering antifungals to A. fumigatus hyphae. In this study, NG is tailored with 2-carboxyethyl acrylate (CEA) or with phosphoric acid 2-hydroxyethyl acrylate (PHA). It is discovered that quenching with PHA clearly improves the adhesion of NG to hyphal surface and the internalization of NG into the hyphae under protein-rich conditions, surpassing the outcomes of non-quenched and CEA-quenched NG. This enhancement cannot be solely attributed to an increase in negative surface charge but appears to be contingent on the functional group of the quencher. Further, it is demonstrated that itraconazole-loaded, PHA-functionalized nanogels (NGxPHA-ITZ) show lower MIC in vitro and superior therapeutic effect in vivo against A. fumigatus compared to pure itraconazole. This confirms NGxPHA as a promising antifungal delivery system., (© 2024 The Author(s). Macromolecular Bioscience published by Wiley‐VCH GmbH.)