Search

The performance of antennas can severely deteriorate in the presence of adjacent electrically-large scatterers. In this work, we use a conducting hollow cylinder to shield the scatterer. The cylinder is shelled with single layer dielectric and electromagnetic metasurface. The scattering field analysis with respect to the surface impedance is derived. By optimizing the anisotropic impedance distribution, the scattering cross-section can be effectively reduced. The proposed method is valid for both TMz, TEz and non-TM/TE incident field. The accuracy and effectiveness of the method are verified by four cloaking scenarios in microwave regime. We demonstrate that with the surface impedance obtained by our method, a metasurface is designed with physical subwavelength structure. We also show a cloaking scenario under magnetic dipole radiation, which is closer to the case of a realistic antenna. This method can be further applied to cloaking tasks in terahertz and optical regimes., Comment: 16 pages, 10 figures

We demonstrate that reflectionless propagation of electromagnetic waves between two different materials can be achieved by designing an intermediate temporal medium, which can work in an ultra-wide frequency band. Such a temporal medium is designed with consideration of a multi-stage variation of the material' s permittivity in the time domain. The multi-stage temporal permittivity is formed by a cascaded quarter-wave temporal coating, which is an extension of the antireflection temporal coating by Pacheco-Pe\~na et al [[1] Optica 7, 323 (2020)]. The strategy to render ultra-wideband antireflection temporal medium is discussed analytically and verified numerically. In-depth analysis shows that the multi-stage design of the temporal media implies a continuously temporal variation of the material' s constitutive parameters, thus an ultra-wideband antireflection temporal medium is reasonably obtained. As an illustrative example for application, the proposed temporal medium is adopted to realize impedance matching between a dielectric slab and free space, which validates our new findings., Comment: 9 pages, 5 figures, 1 table

A compact, continuous-wave, mmWave radar sensor is developed for non-contact detection of micron-scale motions. This board-integrated radar system consists of a pair of mmWave transmitter and receiver, two series-fed microstrip patch arrays, an IF subsystem, and a microcontroller. Working at 60-GHz frequency, this super-heterodyne, digital-IF radar sensor exhibits an agile sensitivity and a robust anti-noise performance. Assisted by a gradient-descent DC offset estimation and a phase demodulation algorithm based on extended differential and cross-multiply, a 45-{\mu}m pendulum swing can be experimentally detected with a 20.6-dB SNR, verifying its strong ability in Doppler micro-motion detections.

In the past decades, continuous Doppler radar sensor-based bio-signal detections have attracted many research interests. A typical example is the Doppler heartbeat detection. While significant progresses have been achieved, reliable, time-domain accurate demodulation of bio-signals in the presence of unavoidable DC offsets remains a technical challenge. Aiming to overcome this difficulty, we propose in this paper a novel demodulation algorithm that does not need to trace and eliminate dynamic DC offsets based on approximating segmented arcs in a quadrature constellation of sampling data to directional chords. Assisted by the principal component analysis, such chords and their directions can be deterministically determined. Simulations and experimental validations showed fully recovery of micron-level pendulum movements and strongly noised human heartbeats, verifying the effectiveness and accuracy of the proposed approach., Comment: Accepted by IEEE Transactions on Instrumentation & Measurement

We introduce a solid material that is itself invisible, possessing identical electromagnetic properties as air (i.e. not a cloak) at a desired frequency. Such a material could provide improved mechanical stability, electrical conduction and heat dissipation to a system, without disturbing incident electromagnetic radiation. One immediate application would be towards perfect antenna radomes. Unlike cloaks, such a transparent and self-invisible material has yet to be demonstrated. Previous research has shown that a single sphere or cylinder coated with plasmonic or dielectric layers can have a dark-state with considerably suppressed scattering cross-section, due to the destructive interference between two resonances in one of its scattering channels. Nevertheless, a massive collection of these objects will have an accumulated and detectable disturbance to the original field distribution. Here we overcome this bottleneck by lining up the dark-state frequencies in different channels. Specifically, we derive analytically, verify numerically and demonstrate experimentally that deliberately designed corrugated metallic wires can have record-low scattering amplitudes, achieved by aligning the nodal frequencies of the first two scattering channels. This enables an arbitrary assembly of these wires to be omnidirectionally invisible and the effective constitutive parameters nearly identical to air. Measured transmission spectra at microwave frequencies reveal indistinguishable results for all the arrangements of the 3D-printed samples studied., Comment: 11 pages, 3 figures

In 1929, Hermann Weyl derived the massless solutions from the Dirac equation - the relativistic wave equation for electrons. Neutrinos were thought, for decades, to be Weyl fermions until the discovery of the neutrino mass. Moreover, it has been suggested that low energy excitations in condensed matter can be the solutions to the Weyl Hamiltonian. Recently, photons have also been proposed to emerge as Weyl particles inside photonic crystals. In all cases, two linear dispersion bands in the three-dimensional (3D) momentum space intersect at a single degenerate point - the Weyl point. Remarkably, these Weyl points are monopoles of Berry flux with topological charges defined by the Chern numbers. These topological invariants enable materials containing Weyl points to exhibit a wide variety of novel phenomena including surface Fermi arcs, chiral anomaly, negative magnetoresistance, nonlocal transport, quantum anomalous Hall effect, unconventional superconductivity[15] and others [16, 17]. Nevertheless, Weyl points are yet to be experimentally observed in nature. In this work, we report on precisely such an observation in an inversion-breaking 3D double-gyroid photonic crystal without breaking time-reversal symmetry., Comment: 4 pages, 3 figures

We demonstrate how broadband angular selectivity can be achieved with stacks of one-dimensionally periodic photonic crystals, each consisting of alternating isotropic layers and effective anisotropic layers, where each effective anisotropic layer is constructed from a multilayered metamaterial. We show that by simply changing the structure of the metamaterials, the selective angle can be tuned to a broad range of angles; and, by increasing the number of stacks, the angular transmission window can be made as narrow as desired. As a proof of principle, we realize the idea experimentally in the microwave regime. The angular selectivity and tunability we report here can have various applications such as in directional control of electromagnetic emitters and detectors., Comment: 5 pages, 5 figures

We investigate the scattering of 2D cylindrical invisibility cloaks with simplified constitutive parameters with the assistance of scattering coefficients. We show that the scattering of the cloaks originates not only from the boundary conditions but also from the spatial variation of the component of permittivity/permeability. According to our formulation, we propose some restrictions to the invisibility cloak in order to minimize its scattering after the simplification has taken place. With our theoretical analysis, it is possible to design a simplified cloak by using some peculiar composites like photonic crystals (PCs) which mimic an effective refractive index landscape rather than offering effective constitutives, meanwhile canceling the scattering from the inner and outer boundaries., Comment: Accepted for J. Phys. D

We show that anisotropic negative effective dispersion relation can be achieved in pure dielectric rod-type metamaterials by turning from the symmetry of a square lattice to that of a rectangular one, i.e. by breaking the rotation symmetry of effective homogeneous medium. Theoretical predictions and conclusions are verified by both numerical calculations and computer based simulations. The proposed anisotropic metamaterial, is used to construct a refocusing slab-lens and a subdiffraction hyperlens. The all-dielectric origin makes it more straightforward to address loss and scaling, two major issues of metallic structures, thus facilitating future applications in both the terahertz and optical range., Comment: Accepted for APL

We show that a metallic plate with fractal-shaped slits can be homogenitized as a plasmonic metamaterial with plasmon frequency dictated by the fractal geometry. Owing to the all-dimensional subwavelength nature of the fractal pattern, our system supports both transverse-electric and transverse-magnetic surface plasmons. As a result, this structure can be employed to focus light sources with all-dimensional subwavelength resolutions and enhanced field strengths. Microwave experiments reveal that the best achievable resolution is only, and simulations demonstrate that similar effects can be realized at infrared frequencies with appropriate designs., Comment: 13 pages, 4 figures

In this paper, we show by experiment that by covering a thin flat nonlinear lens on the sources, the sub-diffraction-limit observation can be achieved by measuring either the near-field distribution or the far-field radiation of the sources at the harmonic frequencies and calculating the inverse Fourier transformation to obtain the sub-wavelength imaging. Especially, the sub-wavelength image calculated from measured far-field data demonstrates very clear resolution. Since metamaterials included with active elements can easily behave strong nonlinearity under very weak incident electromagnetic powers, the application of the nonlinear lens proposed in this paper would have important potential in improving the sub-wavelength resolution in the near future., Comment: 17 pages, 4 figures

The electromagnetic characteristics of plane-transformed invisibility cloaks are quantitatively studied in this paper. We take elliptical cylindrical cloak as the example, and use an elliptical cylindrical wave expansion method to obtain the scattered field. It is demonstrated that an ideal elliptical cylindrical cloak is inherently visible. Noticeable field scattering and penetration will be induced when the cloak is exposed directly to an electromagnetic wave. However, as long as the cloak consists of a perfect electric conducting lining at the interior surface, perfect invisibility can still be achieved along the direction parallel to the major axis of the cloak for transverse magnetic illumination. Another plane-transformed cloak with a conical geometry is also proposed. The advantage of this cloak is that all the permittivity and permeability elements are spatially invariant while none of them is singular. Hence, it is easily realizable with artificially structured metamaterials. Finally, we show that this kind of cloak can also be used to cloak objects on a flat ground plane., Comment: 25 pages, 8 figures

Ray-tracing exercise and full-wave analysis were performed to validate the performance of a new type of cloak composed of isotropic metamaterials. It is shown that objects inside the folded region of this cloak appear invisible to the incoming light from a ray tracing exercise, but exhibit magnified and shifted scattering under a plane wave illumination from a full wave analysis. Gaussian beams are introduced to resolve this interesting paradox resulted from these two methods. We show that at the time-harmonic state, small energy can be diffracted into the folded region and contribute to the resonant state even when the Gaussian beam is steered away from the cloak with an object inside. A scattering pattern identical to that scattered from the image of the object will be formed, which agrees well with the phenomenon in the plane wave incidence case., Comment: 17 pages, 4 figures

The nonlinear properties of a metamaterial sample composed of double-layer metallic patterns and voltage controllable diodes are experimentally investigated. Second harmonics and spectrum modulations are clearly observed in a wide band of microwave frequencies, showing that this kind of metamaterial is not only tunable by low DC bias voltage, but also behaves strong nonlinear property under a small power incidence. These properties are difficult to be found in normal, naturally occurring materials., Comment: 14 pages, 4 figures

The coordinate transformation on the space that contains electromagnetic sources is studied. We find that, not only the permittivity and permeability tensors of the media, but also the sources inside the media will take another form in order to behave equivalently as the original case. It is demonstrated that, a source of arbitrary shape and position in the free space can be replaced by an appropriately designed metamaterial coating with current distributed on the inner surface and would not be detected by outer observers, because the emission of the source can be controlled at will in this way. As examples, we show how to design conformal antennas by covering the sources with transformation media. The method proposed in this letter provides a completely new approach to develop novel active EM devices.

We use coordinate transformation theory to realize substrates that can modify the emission of an embedded source. Simulation results show that with proper transformation functions the energy radiated by a source embedded in these space variant media will be concentrated in a narrow beam. The thickness of the slab achieved with our transformations will no longer be restricted by the evanescent modes and the source can be placed at any position along the boundary of the substrate without affecting the radiation pattern. We also discuss the case where reduced parameters are used, which still performs well and is physically realizable., Comment: 15 pages, 5 figures

We investigate a general class of electromagnetic devices created with any continuous transformation functions by rigorously calculating the analytical expressions of the electromagnetic field in the whole space. Some interesting phenomena associated with these transformation devices, including the invisibility cloaks, concentrators, and field rotators, are discussed. By carefully choosing the transformation function, we can realize cloaks which are insensitive to perturbations at both the inner and outer boundaries. Furthermore, we find that when the coating layer of the concentrator is realized with left-handed materials, energy will circulate between the coating and the core, and the energy transmits through the core of the concentrator can be much bigger than that transmits through the concentrator. Therefore, such concentrator is also a power flux amplifier. Finally, we propose a spherical field rotator, which functions as not only a wave vector rotator, but also a polarization rotator, depending on the orientations of the spherical rotator with respect to the incident wave direction. The functionality of these novel transformation devices are all successfully confirmed by our analytical full wave method, which also provides an alternate computational efficient validation method in contrast to numerical validation methods., Comment: 22 pages, 3 figures