Search

The discharge mode characteristics of cathodes may strongly influence the discharge stability and performance of electrostatic thrusters. In this article, discharge characteristics and mode transition phenomenon of the ring-cusp magnetically confined plasma bridge neutralizer (RCM-PBN) were experimentally studied using argon as the working gas. The dependences of anode current and oscillation amplitude on anode voltage, argon flow rate, heater power, and cathode-to-anode distance were investigated. Plasma properties were measured and plasma plume images were taken under different discharge modes. Two distinct discharge modes were observed during the experiments: high oscillation mode and low oscillation mode. In the high oscillation mode, the plasma plume appears dim, the anode current is low, and the oscillation level is more than 2%. While in the low oscillation mode, a spot-like structure close to the orifice is observed. The plume becomes brighter, the anode current increases, and the oscillation level decreases below 2%. The RCM-PBN was found to transition into the low oscillation mode by increasing anode voltage, flow rate, heater power and by decreasing the cathode-to-anode distance. [ABSTRACT FROM AUTHOR]

The Blumlein pulse forming network (PFN) has widely been used in pulsed power technology to generate square waves with short pulse widths. In this paper, we developed a repetitive frequency square wave generator based on Blumlein PFN and pseudospark switch (PSS). A Blumlein PFN with unequal capacitances has been proposed, and the PFN parameters have been optimized for better output waveforms. A single-gap PSS with a withstand voltage of 40 kV and a repetitive frequency of 100 Hz has been designed to switch the Blumlein PFN. The experiment results show that the square wave generator can output pulses with a voltage of 26 kV, a rise time of 25 ns, and a pulse width of 90 ns on a matched load of 11 Ω. It has operated steadily for 10 h with a repetitive frequency of 100 Hz, and the jitter remains at around 1 ns after 1.05 × 106 shots. [ABSTRACT FROM AUTHOR]