Search

Proposed experiments for obtaining empirical evidence for a quantum description of gravity in a table-top setting focus on detecting quantum information signatures, such as entanglement or non-Gaussianity production, in gravitationally interacting quantum systems. Here, we explore an alternative approach where the quantization of gravity could be inferred through measurements of macroscopic, thermodynamical quantities, without the need for addressability of individual quantum systems. To demonstrate the idea, we take as a case study a gravitationally self-interacting Bose gas, and consider its heat capacity. We find a clear-cut distinction between the predictions of a classical gravitational interaction and a quantum gravitational interaction in the heat capacity of the Bose gas., Comment: 4 pages, 4 pages appendix

Interoperability is the key to implementing a wide range of energy systems applications. It involves the seamless cooperation of different methods and components. With smart energy systems, interoperability faces challenges due to integrating differ-ent approaches and technologies. This includes dealing with heterogeneous approaches with various communication proto-cols and data formats. However, it is essential for smart energy systems to carry out thorough interoperability tests. They are usually diverse, and challenging, thus requiring careful consideration of compatibility issues and complex integration scenari-os. Overcoming these challenges requires a systematic approach that includes thorough test planning, rigorous testing, and continuous test monitoring. Although numerous testing approaches exist, most are more developed at the component/device level than at the system level. Consequently, there are few approaches and related facilities to test the interoperability of smart energy approaches and solutions at the system level. This work analyses existing interoperability test concepts, identi-fies enablers and the potential for harmonisation of procedures, and proposes further developments of these approaches., Comment: 14th Mediterranean Conference on Power Generation Transmission, Distribution and Energy Conversion (MED POWER 2024)

The frequency stability of a power system is of paramount importance, as a fast frequency swings in the system can lead to oscillatory instability, and thereby blackouts. A grid-connected microgrid, that can operate in the islanded mode can also possess such deteriorating effect due to the higher share of converter-based sources. In this paper, a coordinated frequency control within a distribution network is discussed, with a higher share of Photovoltaics (PV). The main objective of this paper is to test the grid-forming capabilities of PVs, without the requirement of an energy storage in the network. The tests were carried out with the help of the Typhoon Hardware-in-the-loop (HIL) platform using a real Cypriot network feeder. The real-time results confirm the efficacy of the PV as a grid-forming inverter, provided it has sufficient input (irradiance) to provide for the loads within the system of interest. The grid-forming PV also possesses the capability of reconnection with the utility grid through a synchronizer switch that requires minimal communication, makes the overall control independent of any other power source, subject to certain irradiance and loading conditions., Comment: 13th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MEDPOWER 2022)

Smart energy systems comprise multiple domains like power, thermal, control, information, and communication technology, which increases the complexity of research and development studies. This expansion also requires larger and ever so complex experimental pilot environments driving the demand for geographically distributed multi-research infrastructure tests. The Holistic Test Description approach supports the design of multi-domain and multi-research infrastructure tests by organizing the test cases into comprehensive segments, ensuring all relevant items for testing are covered. These test cases eventually form a pool, which to understand holistically would require studying and reading all the descriptions. This work proposes therefore the concept of Test Case Profiles to improve test case discovery and the structured creation of them. Test Case Profiles add further structure to the indexing in test case repositories. Along with the proposed indexing method, four different use cases are introduced to motivate additional applications of the proposed concept., Comment: 2023 Open Source Modelling and Simulation of Energy Systems (OSMSES)

Modeling and simulation of electrical power systems are becoming increasingly important approaches for the development and operation of novel smart grid functionalities -- especially with regard to data-driven applications as data of certain operational states or misconfigurations can be next to impossible to obtain. The DeMaDs framework allows for the simulation and modeling of electric power grids and malfunctions therein. Furthermore, it serves as a testbed to assess the applicability of various data-driven malfunction detection methods. These include data mining techniques, traditional machine learning approaches as well as deep learning methods. The framework's capabilities and functionality are laid out here, as well as explained by the means of an illustrative example., Comment: 2023 Open Source Modelling and Simulation of Energy Systems (OSMSES)

The changes in the electric energy system toward a sustainable future are inevitable and already on the way today. This often entails a change of paradigm for the electric energy grid, for example, the switch from central to decentralized power generation which also has to provide grid-supporting functionalities. However, due to the scarcity of distributed sensors, new solutions for grid operators for monitoring these functionalities are needed. The framework presented in this work allows to apply and assess data-driven detection methods in order to implement such monitoring capabilities. Furthermore, an approach to a multi-stage detection of misconfigurations is introduced. Details on implementations of the single stages as well as their requirements are also presented. Furthermore, testing and validation results are discussed. Due to its feature of being seamlessly integrable into system operators' current metering infrastructure, clear benefits of the proposed solution are pointed out., Comment: 27th International Conference on Electricity Distribution (CIRED 2023)

Due to the increased deployment of renewable energy sources and intelligent components the electric power system will exhibit a large degree of heterogeneity, which requires inclusive and multi-disciplinary system assessment. The concept of co-simulation is a very attractive option to achieve this; each domain-specific subsystem can be addressed via its own specialized simulation tool. The applicability, however, depends on aspects like standardised interfaces, automated case creation, initialisation, and the scalability of the co-simulation itself. This work deals with the inclusion of the Functional Mock-up Interface for co-simulation into the DIgSILENT PowerFactory simulator, and tests its accuracy, implementation, and scalability for the grid connection study of a wind power plant. The coupling between the RMS mode of PowerFactory and MATLAB/Simulink in a standardised manner is shown. This approach allows a straightforward inclusion of black-boxed modelling, is easily scalable in size, quantity, and component type., Comment: 2019 IEEE PES Innovative Smart Grid Technologies Europe (ISGT-Europe)

Smart grid interoperability is the means to achieve the twin green and digital transition but re-mains heterogeneous and fragmented to date. This work presents the first ideas and corner-stones of an Interoperability Roadmap for the Energy Transition that is being developed by the Horizon Europe int:net project. This roadmap builds on four cornerstones that address open interoperability issues. These are a knowledge base to address the lack of convergence among existing initiatives, a maturity model and a network of testing and certification facilities to ad-dress the lack of practical tools for the industry, and a governance process to address the gap between standards-related approaches of Standards Development Organisations and Research and Innovation projects. A community of practice will be set up to ensure the continuity of the ongoing activities related to smart grid interoperability. To outlive the duration of the int:net project, the aim is to formalise the community of practice as a legal entity., Comment: 12. (Hybrid) Symposium Communications for Energy Systems (ComForEn 2023)

The low-voltage ride-through service is carried out in this paper according to the voltage profile described by the IEC 61400-21 European normative when short-duration voltage sags happen, and some instantaneous reactive power is delivered to the grid in accordance with the Spanish grid code; the mandatory limitation of the amplitude of the three-phase inverter currents to its nominal value is carried out with a novel control strategy, in which a certain amount of instantaneous constant active power can also be delivered to the grid when small or moderate voltage sags happen. A Multiple second order generalized integrator frequency-locked loop synchronization algorithm is employed in order to estimate the system frequency without harmonic distortions, as well as to output the positive- and the negative- sequence of the {\alpha}\b{eta} quantities of the three-phase grid voltages when balanced and unbalanced voltage sags happen in a frequency-adaptive scheme. The current control is carried out in the stationary reference frame, which guarantees the cancellation of the harmonic distortions in the utility grid currents using a Harmonic compensation structure, and the implementation of a constant active power control in order to protect the DC link capacitor from thermal stresses avoiding the appearance of large harmonic distortions at twice the fundamental frequency in the DC link voltage. A case study of a three-phase single-stage grid-connected PV system with a maximum apparent power about 500 kVA is tested with several simulations using MATLAB/SIMULINK firstly, and secondly, with some experiments using the Controller hardware-in-the-loop (CHIL) simulation technique for several types of voltage sags in order to do the final validation of the control algorithms.

The electrical power network is gradually migrating from a centralized generation approach to a decentralized generation with high shares of renewable energy sources (RES). However, power systems with low shares of synchronous generation and consequently low total system inertia, are vulnerable to power imbalances. Such systems can experience frequency stability problems, such as high frequency excursions and higher rates of change of frequency even under small disturbances. This phenomenon is intensified when the grid under investigation has low or no interconnections (islanded) and thus the challenge for stable operation becomes more significant for the operators. This work focuses on how the frequency stability is affected when a photovoltaic (PV) inverter is integrated into a real non-interconnected distribution grid in Cyprus. In order to capture the realistic interactions of this integration, stability experiments in a hardware-in-the-loop (HIL) environment are performed with the aim to provide insightful results for the grid operator., Comment: The 12th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MEDPOWER 2020)

The transition to the smart grid introduces complexity to the design and operation of electric power systems. This complexity has the potential to result in safety-related losses that are caused, for example, by unforeseen interactions between systems and cyber-attacks. Consequently, it is important to identify potential losses and their root causes, ideally during system design. This is non-trivial and requires a systematic approach. Furthermore, due to complexity, it may not possible to reason about the circumstances that could lead to a loss; in this case, experiments are required. In this work, we present how two complementary deductive approaches can be usefully integrated to address these concerns: Systems Theoretic Process Analysis (STPA) is a systems approach to identifying safety-related hazard scenarios; and the ERIGrid Holistic Test Description (HTD) provides a structured approach to refine and document experiments. The intention of combining these approaches is to enable a systematic approach to hazard analysis whose findings can be experimentally tested. We demonstrate the use of this approach with a reactive power voltage control case study for a low voltage distribution network., Comment: 2020 IEEE 18th International Conference on Industrial Informatics (INDIN)

As the landscape of devices that interact with the electrical grid expands, also the complexity of the scenarios that arise from these interactions increases. Validation methods and tools are typically domain specific and are designed to approach mainly component level testing. For this kind of applications, software and hardware-in-the-loop based simulations as well as lab experiments are all tools that allow testing with different degrees of accuracy at various stages in the development life-cycle. However, things are vastly different when analysing the tools and the methodology available for performing system-level validation. Until now there are no available well-defined approaches for testing complex use cases involving components from different domains. Smart grid applications would typically include a relatively large number of physical devices, software components, as well as communication technology, all working hand in hand. This paper explores the possibilities that are opened in terms of testing by the integration of a real-time simulator into co-simulation environments. Three practical implementations of such systems together with performance metrics are discussed. Two control-related examples are selected in order to show the capabilities of the proposed approach., Comment: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society

Agent-technologies have been used for higher-level decision making in addition to carrying out lower-level automation and control functions in industrial systems. Recent research has identified a number of architectural patterns for the use of agents in industrial automation systems but these practices vary in several ways, including how closely agents are coupled with physical systems and their control functions. Such practices may play a pivotal role in the Cyber-Physical System integration and interaction. Hence, there is a clear need for a common set of criteria for assessing available practices and identifying a best-fit practice for a given industrial use case. Unfortunately, no such common criteria exist currently. This work proposes an assessment criteria approach as well as a methodology to enable the use case based selection of a best practice for integrating agents and industrial systems. The software product quality model proposed by the ISO/IEC 25010 family of standards is used as starting point and is put in the industrial automation context. Subsequently, the proposed methodology is applied, and a survey of experts in the domain is carried out, in order to reveal some insights on the key characteristics of the subject matter., Comment: Conference paper, 7 pages, 2 figures, 1 table

The integration of industrial automation systems and software agents has been practiced for many years. However, such an integration is usually done by experts and there is no consistent way to assess these practices and to optimally select one for a specific system. Standards such as the ISO/IEC 25023 propose measures that could be used to obtain a quantification on the characteristics of such integration. In this work, the suitability of these characteristics and their proposed calculation for assessing the connection of industrial automation systems with software agents is discussed. Results show that although most of the measures are relevant for the integration of agents and industrial automation systems, some are not relevant in this context. Additionally, it was noticed that some measures, especially those of a more technical nature, were either very difficult to computed in the automation system integration, or did not provide sufficient guidance to identify a practice to be used., Comment: Conference paper, 9 pages, 1 figure, 1 table

The secure operation of future power systems will rely on better coordination between transmission system and distribution system operators. Increasing integration of renewables throughout the whole system is challenging the traditional operation. To tackle this problem, the SmartNet project proposes and evaluates five different coordination schemes between system operators using three benchmark scenarios from Denmark, Italy, and Spain. In the project, field tests in each of the benchmark countries are complemented with a number of laboratory validation tests, to cover scenarios that cannot be tested in field trials. This paper presents the outcome of these laboratory tests. Three tests are shown, focusing on controller validation, analysis of communication impacts, and how well price-based controls can integrate with the SmartNet coordination schemes. The results demonstrate important indications for the field tests and also show some of the limitations with the current implementations of the coordinations schemes., Comment: 2019 IEEE PowerTech Milan

The complex and often safety-critical nature of cyber-physical energy systems makes validation a key challenge in facilitating the energy transition, especially when it comes to the testing on system level. Reliable and reproducible validation experiments can be guided by the concept of design of experiments, which is, however, so far not fully adopted by researchers. This paper suggests a structured guideline for design of experiments application within the holistic testing procedure suggested by the European ERIGrid project. In this paper, a general workflow as well as a practical example are provided with the aim to give domain experts a basic understanding of design of experiments compliant testing., Comment: 2018 Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES)

This paper addresses the validation of electric vehicle supply equipment by means of a real-time capable co-simulation approach. This setup implies both pure software and real-time simulation tasks with different sampling rates dependent on the type of the performed experiment. In contrast, controller and power hardware-in-the-loop simulations are methodologies which ask for real-time execution of simulation models with well-defined simulation sampling rates. Software and real-time methods are connected one to each other using an embedded software interface. It is able to process signals with different time step sizes and is called "LabLink". Its design implies both common and specific input and output layers (middle layer), as well as a data bus (core). The LabLink enables the application of the co-simulation methodology on the proposed experimental platform targeting the testing of electric vehicle supply equipment. The test setup architecture and representative examples for the implemented co-simulation are presented in this paper. As such, a validation of the usability of this testing platform can be highlighted aiming to support a higher penetration of electric vehicles., Comment: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC)

Real-time simulation methods for investigations on electric networks and integration of grid connected generation units are increasingly in the focus of ongoing research areas. While laboratory testing methods are the predominant method for the verification of safety and quality related features of grid-connected generation units in the past, load flow modeling verification methods have been integrated in state-of-the-art standardization frameworks recently. The next step is comprised in real-time simulation methodologies applied for compliance testing of entire power electronic systems integrated in power distribution networks. The Controller Hardware-in-the-Loop (CHIL) approach is an appropriate methodology that combines numerical simulations with software modeling approaches and classical hardware testing in labs. Control boards represent the hardware device directly connected to the power electronic periphery, which is entirely simulated in a real-time simulation environment. Hereby, input signals from voltage and current measurements and output signals for power system control are exchanged in real-time. Thanks to this setup the testing of the true behavior of entire generation units within the electric network can be emulated precisely. With the application of CHIL a shorter time to market and a lower risk in the development phase can be achieved. However, an analysis from realized CHIL experiments shows the need for more harmonized procedures. This paper addresses this topic and provides an outlook about necessary future CHIL standardization needs., Comment: 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems (IESES)

Renewables are key enablers for the realization of a sustainable energy supply but grid operators and energy utilities have to mange their intermittent behavior and limited storage capabilities by ensuring the security of supply and power quality. Advanced control approaches, automation concepts, and communication technologies have the potential to address these challenges by providing new intelligent solutions and products. However, the validation of certain aspects of such smart grid systems, especially advanced control and automation concepts is still a challenge. The main aim of this work therefore is to introduce a hardware-in-the-loop co-simulation-based validation framework which allows the simulation of large-scale power networks and control solutions together with real-world components. The application of this concept to a selected voltage control example shows its applicability., Comment: 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE)

New testing and development procedures and methods are needed to address topics like power system stability, operation and control in the context of grid integration of rapidly developing smart grid technologies. In this context, individual testing of units and components has to be reconsidered and appropriate testing procedures and methods need to be described and implemented. This paper addresses these needs by proposing a holistic and enhanced testing methodology that integrates simulation/software- and hardware-based testing infrastructure. This approach presents the advantage of a testing environment, which is very close to f i eld testing, includes the grid dynamic behavior feedback and is risks-free for the power system, for the equipment under test and for the personnel executing the tests. Furthermore, this paper gives an overview of successful implementation of the proposed testing approach within different testing infrastructure available at the premises of different research institutes in Europe., Comment: 2018 IEEE Workshop on Complexity in Engineering (COMPENG)

Traditional power systems education and training is flanked by the demand for coping with the rising complexity of energy systems, like the integration of renewable and distributed generation, communication, control and information technology. A broad understanding of these topics by the current/future researchers and engineers is becoming more and more necessary. This paper identifies educational and training needs addressing the higher complexity of intelligent energy systems. Education needs and requirements are discussed, such as the development of systems-oriented skills and cross-disciplinary learning. Education and training possibilities and necessary tools are described focusing on classroom but also on laboratory-based learning methods. In this context, experiences of using notebooks, co-simulation approaches, hardware-in-the-loop methods and remote labs experiments are discussed., Comment: 8th International Conference on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS 2017)

Smart grid systems are characterized by high complexity due to interactions between a traditional passive network and active power electronic components, coupled using communication links. Additionally, automation and information technology plays an important role in order to operate and optimize such cyber-physical energy systems with a high(er) penetration of fluctuating renewable generation and controllable loads. As a result of these developments the validation on the system level becomes much more important during the whole engineering and deployment process, today. In earlier development stages and for larger system configurations laboratory-based testing is not always an option. Due to recent developments, simulation-based approaches are now an appropriate tool to support the development, implementation, and roll-out of smart grid solutions. This paper discusses the current state of simulation-based approaches and outlines the necessary future research and development directions in the domain of power and energy systems., Comment: 8th International Conference on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS 2017)

The integration of distributed renewable energy sources and the multi-domain behaviours inside the cyber-physical energy system (smart grids) draws up major challenges. Their validation and roll out requires careful assessment, in term of modelling, simulation and testing. The traditional approach focusing on a particular object, actual hardware or a detailed model, while drastically simplifying the remainder of the system under test, is no longer sufficient. Real-time simulation and Hardware-in-the-Loop (HIL) techniques emerge as indispensable tools for validating the behaviour of renewable sources as well as their impact/interaction to with the cyber-physical energy system. This paper aims to provide an overview of the present status-quo of real-time and HIL approaches used for smart grids and their readiness for cyber-physical experiments. We investigate the current limitations of HIL techniques and point out necessary future developments. Subsequently, the paper highlights challenges that need specific attention as well as ongoing actions and further research directions., Comment: IEEE PES Innovative Smart Grid Technologies ISGT Asia 2017

Renewables are key enablers in the plight to reduce greenhouse gas emissions and cope with anthropogenic global warming. The intermittent nature and limited storage capabilities of renewables culminate in new challenges that power system operators have to deal with in order to regulate power quality and ensure security of supply. At the same time, the increased availability of advanced automation and communication technologies provides new opportunities for the derivation of intelligent solutions to tackle the challenges. Previous work has shown various new methods of operating highly interconnected power grids, and their corresponding components, in a more effective way. As a consequence of these developments, the traditional power system is being transformed into a cyber-physical energy system, a smart grid. Previous and ongoing research have tended to mainly focus on how specific aspects of smart grids can be validated, but until there exists no integrated approach for the analysis and evaluation of complex cyber-physical systems configurations. This paper introduces integrated research infrastructure that provides methods and tools for validating smart grid systems in a holistic, cyber-physical manner. The corresponding concepts are currently being developed further in the European project ERIGrid., Comment: 8th International Conference on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS 2017)

Composed of a large variety of technologies and applications with unprecedented complexity, the smart grid, as a cyber-physical energy system, needs careful investigation of the interactions between the various domains involved, especially the coupling between the power and information systems. In this paper, two modern ways of modeling and simulating complex cyber-physical energy systems are considered: Co-simulation and Power-Hardware-in-the-Loop experiments. An analysis of these two approaches shows that a complementary and joint setup with realistic behaviors of hardware equipment under a variety of complex environments, co-simulated by several simulators from different domains, create a complete and high performance environment to achieve a holistic approach for smart grid validation and roll out. In the scope of coupling these two techniques, major technical challenges are identified and advanced solutions are outlined., Comment: IEEE PES Innovative Smart Grid Technologies ISGT Europe 2017

The IEC 61499 reference model provides an international standard developed specifically for supporting the creation of distributed event-based automation systems. Functionality is abstracted into function blocks which can be coded graphically as well as via a text-based method. As one of the design goals was the ability to support distributed control applications, communication plays a central role in the IEC 61499 specification. In order to enable the deployment of functionality to distributed platforms, these platforms need to exchange data in a variety of protocols. IEC 61499 realizes the support of these protocols via "Service Interface Function Blocks" (SIFBs). In the context of smart grids and energy applications, IEC 61499 could play an important role, as these applications require coordinating several distributed control logics. Yet, the support of grid-related protocols is a pre-condition for a wide-spread utilization of IEC 61499. The eXtensible Messaging and Presence Protocol (XMPP) on the other hand is a well-established protocol for messaging, which has recently been adopted for smart grid communication. Thus, SIFBs for XMPP facilitate distributed control applications, which use XMPP for exchanging all control relevant data, being realized with the help of IEC 61499. This paper introduces the idea of integrating XMPP into SIFBs, demonstrates the prototypical implementation in an open source IEC 61499 platform and provides an evaluation of the feasibility of the result., Comment: 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA)

The gradual deployment of intelligent and coordinated devices in the electrical power system needs careful investigation of the interactions between the various domains involved. Especially due to the coupling between ICT and power systems a holistic approach for testing and validating is required. Taking existing (quasi-) standardised smart grid system and test specification methods as a starting point, we are developing a holistic testing and validation approach that allows a very flexible way of assessing the system level aspects by various types of experiments (including virtual, real, and mixed lab settings). This paper describes the formal holistic test case specification method and applies it to a particular co-simulation experimental setup. The various building blocks of such a simulation (i.e., FMI, mosaik, domain-specific simulation federates) are covered in more detail. The presented method addresses most modeling and specification challenges in cyber-physical energy systems and is extensible for future additions such as uncertainty quantification., Comment: 2017 Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES)

For robust testing of new technologies used in future, intelligent power and energy systems, realistic testing environments are needed. Due to the dimensions of a real-world environment a field-based installation is often not viable. More efficient instead of a local installation is to connect existing and highly sophisticated labs with different focus of specialization. Today's experimental setups for the Smart Grid domain are very time-consuming solutions or specific implementations for a single project. To overcome this challenge, an innovative concept for a novel approach for large-scale co-simulation across locations (different labs) is presented in this paper., Comment: IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society

Renewable energy sources and further electrificationof energy consumption are key enablers for decreasing green-house gas emissions, but also introduce increased complexitywithin the electric power system. The increased availability ofautomation, information and communication technology, andintelligent solutions for system operation have transformed thepower system into a smart grid. In order to support thedevelopment process of smart grid solutions on the system level,testing has to be done in a holistic manner, covering the multi-domain aspect of such complex systems. This paper introducesthe concept of holistic power system testing and discuss first stepstowards a corresponding methodology that is being developed inthe European ERIGrid research infrastructure project., Comment: 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA)