Search

Your search keyword '"Tang, Wenxian"' showing total 223 results
Start Over Author "Tang, Wenxian" Publication Year Range Last 50 years
223 results on '"Tang, Wenxian"'

10. Fatigue and Corrosion Fatigue of 18Ni Maraging Steel

Author

Zhu Yongmei, Chen Junjie, Tang Wenxian, Cui Weicheng, Wang Xiaorong, Wang Fang, and Yin Baoji

Subjects
corrosion fatigue, 18ni (250), loading frequency, stress ratio, 3.5%nacl solution, Mining engineering. Metallurgy, TN1-997, Materials of engineering and construction. Mechanics of materials, TA401-492
Abstract

This study focused on the fatigue and corrosion fatigue of maraging steel 18Ni (250). The 18Ni (250) samples were tested for axial fatigue in air and 3.5% NaCl solution. The effects of loading frequency and stress ratio on the fatigue strength of 18Ni (250) were studied. In air, the loading frequency was 10 Hz, and the stress ratio was 0.5. However, three loading methods were used in the 3.5% NaCl solution: (i) the loading frequency of 1 Hz and stress ratio of 0.5; (ii) the loading frequency of 1 Hz and stress ratio 0.1, and (iii) the loading frequency 5 Hz and stress ratio 0.5. The corrosion fatigue strength of samples in the 3.5% NaCl solution was 63.3% lower than that of the samples in air. The fractures in the samples were observed after the test.

Published
2021
Full Text
View/download PDF

12. Thruster Fault Identification for Autonomous Underwater Vehicle Based on Time-Domain Energy and Time-Frequency Entropy of Fusion Signal

Author

Yin, Baoji, Lin, Xi, Tang, Wenxian, Jin, Zhikun, Goos, Gerhard, Founding Editor, Hartmanis, Juris, Founding Editor, Bertino, Elisa, Editorial Board Member, Gao, Wen, Editorial Board Member, Steffen, Bernhard, Editorial Board Member, Woeginger, Gerhard, Editorial Board Member, Yung, Moti, Editorial Board Member, Yu, Haibin, editor, Liu, Jinguo, editor, Liu, Lianqing, editor, Ju, Zhaojie, editor, Liu, Yuwang, editor, and Zhou, Dalin, editor

Published
2019
Full Text
View/download PDF

13. Fatigue and Corrosion Fatigue of 18Ni Maraging Steel

Author

Zhu Yongmei, Chen Junjie, Tang Wenxian, Cui Weicheng, Wang Xiaorong, Wang Fang, and Yin Baoji

Subjects
corrosion fatigue, 18ni (250), loading frequency, stress ratio, 3.5%nacl solution, Mining engineering. Metallurgy, TN1-997, Materials of engineering and construction. Mechanics of materials, TA401-492
Abstract

This study focused on the fatigue and corrosion fatigue of maraging steel 18Ni (250). The 18Ni (250) samples were tested for axial fatigue in air and 3.5% NaCl solution. The effects of loading frequency and stress ratio on the fatigue strength of 18Ni (250) were studied. In air, the loading frequency was 10 Hz, and the stress ratio was 0.5. However, three loading methods were used in the 3.5% NaCl solution: (i) the loading frequency of 1 Hz and stress ratio of 0.5; (ii) the loading frequency of 1 Hz and stress ratio 0.1, and (iii) the loading frequency 5 Hz and stress ratio 0.5. The corrosion fatigue strength of samples in the 3.5% NaCl solution was 63.3% lower than that of the samples in air. The fractures in the samples were observed after the test.

Published
2020
Full Text
View/download PDF

34. Thruster fault identification using improved peak region energy and multiple model least square support vector data description for autonomous underwater vehicle

Author

Yin, Baoji, Zhang, Mingjun, Zhou, Jiahui, Tang, Wenxian, and Jin, Zhikun

Abstract

This article investigates a novel fault identification approach to determine the percentage of the thrust loss for autonomous underwater vehicle thrusters. The novel approach is developed from a combination of the peak region energy (PRE) and support vector data description (SVDD) by considering that PRE is able to acquire a primary feature in low dimensions from signals without any secondary process and that SVDD can establish a hypersphere boundary for a class of fault samples even in the case of a small number of training samples. Three improvements, namely removing the fusion, an energy leakage and a homomorphic transform are applied to the PRE. It forms an improved PRE to increase the area under the curve. Furthermore, another three new contents, namely the least square, a multiple model fusion and a dead zone are added to the SVDD. It constructs a multiple model least square SVDD to increase the overall identification accuracy. Experiments are performed on an experimental prototype autonomous underwater vehicle in a pool. The experimental results indicate the effectiveness of the proposed method.

Published
2024
Full Text
View/download PDF

41. Research on Visual Recognition and Localization Methods for Different Feature Parts.

Author

Zhou, Zhikai, Tang, Wenxian, and Guo, Sheng

Subjects
*CAMERA calibration, *NOISE control, *INDUSTRIAL sites, *RECOGNITION (Psychology), *PRODUCT attributes
Abstract

Aimed at the problems of complex industrial site environment, difficult identification of assembly features and low positioning accuracy, a new visual identification and positioning method is proposed, which can well identify and locate parts and products with different characteristics. First, combined filtering is used in preprocessing to repair low-quality images. Then, edge detection and contour finding are performed on the preprocessed image. Finally, the internal and external parameters of the camera are calculated through the camera calibration, and the acquired pixel coordinates are converted into world coordinates. The results show that the combined filtering algorithm has good noise reduction effect and can remove image surface noise, which improves the recognition accuracy for the identification and positioning of different feature parts by the subsequent contour search method, and the algorithm can meet the requirements of the actual positioning accuracy of the assembly. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results