Search

This review briefly introduces the degradation mechanisms according to the RH and summarizes various approaches to stabilize halide perovskites. An outlook for research directions of halide perovskites is also suggested.

Metal halide perovskite nanocrystals (PeNCs) with a controlled quantum size effect have received intense interest for potential applications in optoelectronics and photonics. Here, we present a simple and innovative strategy to precisely tune the photoluminescence color of PeNCs by simply printing perovskite precursor solutions on cellulose papers. Depending on the volume of the printed precursor solutions, the PeNCs are autonomously grown into three discrete sizes, and their relative size population is controlled; accordingly, not only the number of multiple PL peaks but also their relative intensities can be precisely tuned. This autonomous size control is obtained through the efflorescence, which is advection of salt ions toward the surface of a porous medium during solvent evaporation and also through the confined crystal growth in the hierarchical structure of cellulose fibers. The infiltrated PeNCs are environmentally stable against moisture (for 3 months in air at 70% relative humidity) and strong light exposure by hydrophobic surface treatment. This study also demonstrates invisible encryption and highly secured unclonable anticounterfeiting patterns on deformable cellulose substrates and banknotes.

Metal thin films with a specific orientation play vital roles in electronics, catalysts, and epitaxial templates. Although oriented metal films have been produced in the recent years, ultrathin oriented metal films (

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity. Agency for Science, Technology and Research (A*STAR) National Research Foundation (NRF) Submitted/Accepted version Y.L., Z.L., M.Z., and X.C. acknowledge the National Research Foundation, Singapore (NRF) under NRF’s Medium Sized Centre: Singapore Hybrid-Integrated Next-Generation μElectronics (SHINE) Centre funding programme, and AME programming funding scheme of Cyber Physiochemical Interface (CPI) project (no. A18A1b0045). Y.L. acknowledges National Natural Science Foundation of China (62201243). C.J. acknowledges funding support from the National Key R&D Program of China (no. 2019YFA0706100), the National Natural Science Foundation of China (82151305), Lingang Laboratory (LG-QS-202202-09). T.Q.T. and N.E.L. acknowledge support by the Basic Science Research Program (no. 2020R1A2C3013480) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT. A.F. acknowledges the AFOSR (grant FA9550-22-1-0423). Y.L. and Y.Z. would like to acknowledge the NSF (award no. 2134664) and NIH (award no. R01HD108473) for financial support. X.F. acknowledges the support from the National Natural Science Foundation of China (grant no. U20A6001). L.Y. would like to thank the A*STAR Central Research Fund (CRF) and the AME Programmatic A18A1b0045 (Cyber Physiochemical Interfaces) for funding support. C.F.G. acknowledges the National Natural Science Foundation of China (no. T2225017). T.Q.T. acknowledges the Brain Pool Program (No. 2020H1D3A2A02111068) through the National Research Foundation (NRF) funded by the Ministry of Science. Z.L. acknowledges the support from RIE2020 AME Programmatic Grant funded by A*STAR-SERC, Singapore (Grant No. A18A1b0045). X.G. acknowledges funding support through the Shanghai Science and Technology Commission (grant no. 19JC1412400), the National Science Fund for Excellent Young Scholars (grant no. 61922057). C.D. acknowledges National Science Foundation CAREER: Conformable Piezoelectrics for Soft Tissue Imaging (grant no. 2044688) and MIT Media Lab Consortium funding. D.K. and O.G.S. acknowledge Leibniz Association and the German Research Foundation DFG (Gottfried Wilhelm Leibniz Program SCHM 1298/22-1, KA5051/1-1 and KA 5051/3-1), as well as the Leibniz association (Leibniz Transfer Program T62/2019). C.W. acknowledges the National Key Research and Development Program of China (grant no. 2021YFA1202600), National Natural Science Foundation of China (grant no. 62174082). A.V.-Y.T., E.Z., Y.Z., X.Z., and J.P. acknowledge the National Research Foundation, Singapore (NRF) under NRF’s Medium Sized Centre: Singapore Hybrid-Integrated Next-Generation μElectronics (SHINE) Centre funding programme, and AME programming funding scheme of Cyber Physiochemical Interface (CPI) project (no. A18A1b0045). R.Z. acknowledges National Natural Science Foundation of China (grant no. 51735007) and Beijing Natural Science Foundation (grant no. 3191001). N.M. acknowledges the support by JST PRESTO Grant Number JPMJPR20B7 and JST Adaptable and Seamless Technology transfer Program through Target-driven R&D (ASTEP) grant number JPMJTM22BK. C.P. acknowledges the Korean government (Ministry of Science and ICT, MSIT) (2022R1A4A3032923). M.W. acknowledges the National Key R&D Program of China under Grant (2021YFB3601200). X.Z. acknowledges National Natural Science Foundation of China (no. 62074029). S.X. acknowledges the 3M nontenured faculty award. T.-W.L. and D.-G.S. acknowledge the Pioneer Research Center Program through the National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (grant no. NRF-2022M3C1A3081211). C.T.L. would like to acknowledge support from the Institute for Health Innovation and Technology (iHealthtech), the MechanoBioEngineering Laboratory at the Department of Biomedical Engineering and the Institute for Functional Intelligent Materials (I-FIM) at the National University of Singapore (NUS). C.T.L. also acknowledges support from the National Research Foundation and A*STAR, under its RIE2020 Industry Alignment Fund − Industry Collaboration Projects (IAF-ICP) (grant no. I2001E0059) − SIA-NUS Digital Aviation Corp Lab and the NUS ARTIC Research (grant no. HFM-RP1). X.Y. acknowledges funding support by City University of Hong Kong (grant no. 9667221). T.X. and X.Z. acknowledge National Natural Science Foundation of China (22234006). B.C.K.T. acknowledges Cyber-Physiochemical Interfaces CPI, A*STAR A18A1b0045. H.G. acknowledges a research start-up grant (002479-00001) from Nanyang Technological University and the Agency for Science, Technology and Research (A*STAR) in Singapore. W.G. acknowledges National Science Foundation grant 2145802. D.J.L. acknowledges support from the US National Science Foundation grant number CBET-2223566. G.Y. acknowledges support from The Welch Foundation award F-1861, and Camille Dreyfus Teacher-Scholar Award. M.D.D. acknowledges funding support from NSF (grant no. EEC1160483). J.-H.A acknowledges the National Research Foundation of Korea (NRF-2015R1A3A2066337). J.C. acknowledges the Henry Samueli School of Engineering & Applied Science and the Department of Bioengineering at the University of California, Los Angeles for startup support and a Brain & Behavior Research Foundation Young Investigator Grant. K.T. acknowledges JST AIP Accelerated Program (no. JPMJCR21U1) and JSPS KAKENHI (grant no. JP22H00594). P.S.W. acknowledges the National Science Foundation (CMMI1636136) for support. A.M.A., M.C.H., and P.S.W. thank the National Institute on Drug Abuse (DA045550) for support. S.M. and X.C. appreciated the support from the Smart Grippers for Soft Robotics (SGSR) Programme under the National Research Foundation, Prime Minister’s Office, Singapore under its Campus of Research Excellence and Technological Enterprise (CREATE) programme.

Tremendous efforts have been devoted to wearable mechanical sensors to meet growing needs in healthcare sensors and electronic skins.

Drug-induced cardiotoxicity is regarded as a major hurdle in the early stages of drug development. Although there are various methods for preclinical cardiotoxicity tests, they cannot completely predict the cardiotoxic potential of a compound due to the lack of physiological relevance. Recently, three-dimensional engineered heart tissue (EHT) has been used to investigate cardiac muscle functions as well as pharmacological effects by exhibiting physiological auxotonic contractions. However, there is still no adequate platform for continuous monitoring to test acute and chronic pharmacological effects in vitro. Here, we firstly introduce a biohybrid 3D printing method for fabricating a tissue-sensor platform, composed of a bi-pillar-grafted strain gauge sensor and EHT. Two pillars were three-dimensionally printed as grafts onto a strain gauge-embedded substrate to promote the EHT contractility and guide the self-assembly of the EHTs along with the strain gauge. In addition, the integration of a wireless multi-channel electronic system allowed for continuous monitoring of the EHT contractile force by the tissue-sensor platform and, ultimately, for the observation of the acute and chronic drug effects of cardiotoxicants. In summary, we expect biohybrid 3D printing technology to be a potential fabrication method to provide a next-generation tissue-sensor platform for an effective drug development process. This article is protected by copyright. All rights reserved.

While various crystalline carbon allotropes, including graphene, have been actively investigated, amorphous carbon (a-C) thin films have received relatively little attention. The a-C is a disordered form of carbon bonding with a broad range of the CC bond length and bond angle. Although accurate structural analysis and theoretical approaches are still insufficient, reproducible structure-property relationships have been accumulated. As the a-C thin film is now adapted as a hardmask in the semiconductor industry and new properties are reported continuously, expectations are growing that it can be practically used as active materials beyond as a simple sacrificial layer. In this perspective review article, after a brief introduction to the synthesis and properties of the a-C thin films, their potential practical applications are proposed, including hardmasks, extreme ultraviolet (EUV) pellicles, diffusion barriers, deformable electrodes and interconnects, sensors, active layers, electrodes for energy, micro-supercapacitors, batteries, nanogenerators, electromagnetic interference (EMI) shielding, and nanomembranes. The article ends with a discussion on the technological challenges in a-C thin films.

Feeling temperature and touch The range of receptors in our skin make it possible to sense when we are touching an object and also gives us a general sense of the temperature of that object. Achieving this in an artificial skin-like material has been a challenge because most of the approaches for sensing touch are themselves temperature sensitive. You et al. studied the ion relaxation dynamics in a conductive elastomeric film (see the Perspective by Liu). They show that the ion relaxation time can be used as a strain-insensitive intrinsic variable for detecting temperature and the capacitance can be used as a temperature-insensitive extrinsic variable for sensing the strain, thus decoupling the two so that their signals do not interfere with each other. Science , this issue p. 961 ; see also p. 910

With emerging interest in foldable and stretchable displays, the need to develop transparent deformable electrode and interconnection is increasing. Even though metal films have been standard electrodes in conventional electronic devices due to their high conductivity and well-established process, they have never been used for transparent deformable electrodes. We present highly conductive transparent deformable Au film electrodes and use them to fabricate a foldable perovskite light-emitting diode (PeLED) and a biaxially stretchable alternating current electroluminescence (ACEL) display. We exhibit the formation of an ultrathin (6 nm) continuous Au film on an anisotropic conductive ultrathin film (ACUF) of amorphous carbon. The ultrathin Au film was first formed on an ACUF-coated Si wafer (4 in. scale) through metal evaporation and transferred to the polymer substrates by a simple and effective water-assisted delamination process. Then, a hybrid electrode (ACUF/ACUF/Au) was produced as the transparent deformable electrode. Complicated interconnections could be created by metal deposition through a mask. The electrical conductance of the hybrid electrode was not affected by the crack formation in the Au film during electrode folding, crumpling, and stretching. We reveal the reason why the hybrid electrode can maintain such excellent electrical stability under deformation.

A triboelectric nanogenerator (TENG) is an attractive alternative source of electric power generation; however, its direct use is difficult due to the spike-like alternating current (AC) output. Th...

On-skin healthcare patch-type devices have great technological challenges in monitoring full-day activities and wearing for multiple days without detachment. These challenges can be overcome when the sensor is air permeable but waterproof. This study presents a light-weight, highly stable, and stretchable Au electrode that is fabricated by sputtering on an imidized nanofiber mat. The contact surface of the electrode is hydro-wetting and the outer surface of the electrode is hydrophobic, so the porous electrode simultaneously has excellent sweat permeability and waterproofing capabilities. The electrode is applied to the electrocardiogram sensor for monitoring the cardiac signals for five consecutive days without detaching while doing various full-day activities such as relaxing, exercising, showering, and sleeping. This study suggests a modular setup of the electrodes and the cardiac signal processing unit for activating the device when cardiac monitoring is required.

Wafer-scale growth of single crystal thin films of metals, semiconductors, and insulators is crucial for manufacturing high-performance electronic and optical devices, but still challenging from both scientific and industrial perspectives. Recently, unconventional advanced synthetic approaches have been attempted and have made remarkable progress in diversifying the species of producible single crystal thin films. This review introduces several new synthetic approaches to produce large-area single crystal thin films of various materials according to the concepts and principles.

Microparticle aligned-stretchable anisotropic conductive film enables high-resolution stretchable circuit lines to interconnect., In stretchable electronics, high-resolution stretchable interfacing at a mild temperature is considered as a great challenge and has not been achieved yet. This study presents a stretchable anisotropic conductive film (S-ACF) that can electrically connect high-resolution stretchable circuit lines to other electrodes whether they are rigid, flexible, or stretchable. The key concepts of this study are (i) high-resolution (~50 μm) but low–contact resistance (0.2 ohm in 0.25 mm2) interfacing by periodically embedding conductive microparticles in thermoplastic film, (ii) low-temperature interfacing through the formation of chemical bonds between the S-ACF and the substrates, (iii) economical interfacing by selectively patterning the S-ACF, and (iv) direct interfacing of chips by using the adhesion of the thermoplastic matrix. We integrate light-emitting diodes on the patterned S-ACF and demonstrate stable light operation at large biaxial areal stretching (εxy = 70%).

Transparent flexible transistor array requests large-area fabrication, high integration, high manufacturing throughput, inexpensive process, uniformity in transistor performance, and reproducibility. This study suggests a facile and reliable approach to meet the requirements. We use the Al-coated polymer nanofiber patterns obtained by electrohydrodynamic (EHD) printing as a photomask. We use the lithography and deposition to produce highly aligned nanolines (NLs) of metals, insulators, and semiconductors on large substrates. With these NLs, we demonstrate a highly integrated NL field-effect transistor (NL-FET) array (10

Pyrolyzed carbon (Py-C) film, a member of graphene family, has not been paid significant attention despite its potential advantages in synthesis procedure and opto-electro-mechanical properties. This academic indifference is due to the lack of a low-cost synthesis method for Py-C ultrathin films whose properties are comparable to those of graphene. In this study, we proposed the direct synthesis of Py-C ultrathin films on various target substrates. We produced a hydrogenated amorphous carbon (a-C:H) ultrathin film in a microwave oven and used it as a transferable precursor film for conversion into the Py-C ultrathin film. The thickness of the Py-C ultrathin film was controlled in the range of 0.7–12 nm. The Py-C ultrathin film has opto-electro-mechanical properties comparable to those of graphene, work function (4.57 eV) similar to that of graphene, high transparency with a relatively low sheet resistance (83% at 1.1 kΩ sq−1), excellent flexibility, stable electrical resistance upon folding, anti-oxidation, and chemical protection. This Py-C ultrathin film is expected to find various practical applications as an alternative to graphene. As an example, we demonstrated a highly flexible pixelated display fabricated using the Py-C ultrathin film as an electrode for alternating current electroluminescent (ACEL) devices.

Although branched WO3 nanostructures have been investigated for electrochromic devices and catalytic electrodes, a detailed study on their structural evolution mechanism has rarely been carried out. In this work, we have demonstrated the microwave-assisted synthesis of branched WO3 nanotrees consisting of [001]-oriented WO3 needle-like structures growing radially from the surface of WO3 nanohelixes. The mechanism for the evolution of WO3 nanotrees with the preferred orientation was systematically investigated in terms of the reaction temperature and the distribution of the electric field applied by microwave irradiation. In addition, it was shown that the WO3 nanotrees can be easily converted into WS2/WO3 hierarchical nanotrees by a simple sulfurization process, and used as an efficient catalytic electrode for the hydrogen evolution reaction.

Colloidal particles with a spherical shape and diameters in the range of 0.01−1 μm have been a subject of extensive research, with applications in areas such as photonics, electronics, catalysis, drug delivery, and medicine. For most of these applications, it is of critical importance to achieve monodispersity for the size while expanding the diversity in terms of structure and composition. The uniformity in size allows one to establish rigorous correlations between this parameter and the physicochemical properties of the colloidal particles while ensuring experimental repeatability and measurement accuracy. On the other hand, the diversity in structure and composition offers additional handles for tailoring the properties. By switching from the conventional plain, solid structure to a core-shell, hollow, porous, or Janus structure, it offers immediate advantages and creates new opportunities, especially in the context of self-assembly, encapsulation, and controlled release. As for composition, monodispersed colloidal spheres were traditionally limited to amorphous materials such as polystyrene and silica. For metals and semiconducting materials, which are more valuable to applications in photonics, electronics, and catalysis, they tend to crystallize and thus grow anisotropically into non-spherical shapes, especially when their sizes pass 0.1 μm. Taken together, it is no wonder why chemical synthesis of monodispersed colloidal spheres has been a constant theme of research in areas such as colloidal science, materials chemistry, materials science, and soft matter. In this account, we summarize our efforts over the past two decades in developing solution-phase methods for the facile synthesis of colloidal spheres that are uniform in size, together with a broad range of compositions (including metals and semiconductors) and structures (e.g., solid, core-shell, hollow, porous, and Janus, among others). We start with the synthesis of monodispersed colloidal spheres made of semiconductors, metals with low melting points, and precious metals. Through chemical reactions, these colloidal spheres can be transformed into core-shell or hollow structures with new compositions and properties. Next, we discuss the synthesis of colloidal spheres with a Janus structure while taking a pseudo-spherical shape. Specifically, metal-polymer hybrid particles comprised of one metal nanoparticle partially embedded in the surface of a polymer sphere can be produced through precipitation polymerization in the presence of metal seed. With these Janus particles serving as templates, other types of Janus structures such as hollow spheres with a single hole in the surface can be obtained via site-selected deposition. Alternatively, such hollow spheres can be fabricated through a physical transformation process that involves swelling of polymer spheres, followed by freeze-drying. All these synthesis and transformation processes are solution-based, offering flexibility and potential for large-scale production. At the end, we highlight some of the applications enabled by these colloidal spheres, including fabrication of photonic devices, encapsulation, and controlled release for nanomedicine.

Human cutaneous tactile receptors are deformable, and can distinguish touch, strain, relative moving distance, and relative moving velocity. In addition, the tactile potential is self-activated when external stimulation is exerted and the potential is transmitted to the nerve system, resembling the wake-up function in electronic devices. In this study, we mimic such characteristics of the human tactile receptors. We designed a stretchable triboelectric nanogenerator (TENG) for the stimuli-responsive potential generator. The TENG device has a multilayer structure independently recognizing lateral strain by the sliding mode, touch by the contact mode, the relative moving distance, and the relative moving velocity. In addition, the device design allows simultaneous sensing of strain and touch without signal interference. The self-triggered potentials generated by various body motions such as touching, joint bending, and the combinations turn on a sleeping microcontroller unit (MCU) and are used as the distinct motion signals. This study demonstrates a wearable low-power remote tactile interface that controls the 3D movements of a mobile device (drone) by the body motions.

Full advantage of stretchable electronic devices can be taken when utilizing an intrinsically stretchable power source. High-performance stretchable supercapacitors with a simple structure and solid-state operation are good power sources for stretchable electronics. This study suggests a new type of intrinsically stretchable, printable, electroactive ink consisting of 1T-MoS

Significance Multimodal imaging based on optics and ultrasound can provide guide images and complementary structural and functional information, thus improving the accuracy of medical diagnosis and treatment monitoring. However, because conventional ultrasound transducers are opaque, in multimodal imaging with optics, the optical devices must be placed off-axis from the ultrasound transducer. This off-axis arrangement is prone to misalignment, adds complexity and bulk to the system, and can result in a low signal-to-noise-ratio. Here, we present a transparent ultrasound transducer at the heart of a quadruple fusion imaging system that seamlessly integrates ultrasound imaging, photoacoustic imaging, optical coherence tomography, and fluorescence imaging, and we demonstrate the system’s use in imaging responses to both ophthalmologic injuries and oncologic diseases., Ultrasound and optical imagers are used widely in a variety of biological and medical applications. In particular, multimodal implementations combining light and sound have been actively investigated to improve imaging quality. However, the integration of optical sensors with opaque ultrasound transducers suffers from low signal-to-noise ratios, high complexity, and bulky form factors, significantly limiting its applications. Here, we demonstrate a quadruple fusion imaging system using a spherically focused transparent ultrasound transducer that enables seamless integration of ultrasound imaging with photoacoustic imaging, optical coherence tomography, and fluorescence imaging. As a first application, we comprehensively monitored multiparametric responses to chemical and suture injuries in rats’ eyes in vivo, such as corneal neovascularization, structural changes, cataracts, and inflammation. As a second application, we successfully performed multimodal imaging of tumors in vivo, visualizing melanomas without using labels and visualizing 4T1 mammary carcinomas using PEGylated gold nanorods. We strongly believe that the seamlessly integrated multimodal system can be used not only in ophthalmology and oncology but also in other healthcare applications with broad impact and interest.

Although various stretchable optoelectronic devices have been reported, omni-directionally stretchable transparent circuit lines have been a great challenge. Cracks are engineered and fabricated to be highly conductive patterned metal circuit lines in which gold (Au) grids are embedded. Au is deposited selectively in the cracks to form a grid without any junction between the grid lines. Since each grid line is expandable under stretching, the circuit lines are stretchable in all the directions. This study shows that a thin coating of aluminum on the oxide surface enables precise control of the cracks (crack density, crack depth) in the oxide layer. High optical transparency and high stretchability can be achieved simultaneously by controlling the grid density in the circuit line. Light-emitting diodes are integrated directly on the circuit lines and stable operation is demonstrated under 100% stretching.

Multi-modal imaging technique has significantly spotlighted since it can provide a variety of information by combining the complementary merits of several single-modal imaging. In particular, in order to compensate for each shortcoming and improve image quality, an integrated optical and ultrasonic imaging system is being actively researched. However, the non-transparency of the ultrasound transducer made it difficult to integrate the optical and ultrasound imaging system. In previous study, we introduced the transparent ultrasound transducer (TUT) and dual-modal photoacoustic imaging (PAI)/ultrasound imaging (USI) system using the TUT. In this study, we present the multi-modal imaging system integrated with PA, US and optical coherence tomography (OCT). OCT has the advantage of acquiring anatomical information at optical resolution under subsurface and transparent media. To explore the usefulness of the multi-modal imaging system, we have successfully performed in vivo animal experiments: 1) eye imaging experiments and 2) subcutaneous melanoma imaging. In PAI, blood vessels and melanoma are clearly visualized. In OCT, the morphological information in shallow depth are observed in detail. In USI, the melanoma boundary and surrounding tissues are clearly confirmed. These results show that TUT based multi-modal imaging system can serve as a comprehensive in various applications.

Conductive and stretchable electrodes that can be printed directly on a stretchable substrate have drawn extensive attention for wearable electronics and electronic skins. Printable inks that contain liquid metal are strong candidates for these applications, but the insulating oxide skin that forms around the liquid metal particles limits their conductivity. This study reveals that hydrogen doping introduced by ultrasonication in the presence of aliphatic polymers makes the oxide skin highly conductive and deformable. X-ray photoelectron spectroscopy and atom probe tomography confirmed the hydrogen doping, and first-principles calculations were used to rationalize the obtained conductivity. The printed circuit lines show a metallic conductivity (25,000 S cm–1), excellent electromechanical decoupling at a 500% uniaxial stretching, mechanical resistance to scratches and long-term stability in wide ranges of temperature and humidity. The self-passivation of the printed lines allows the direct printing of three-dimensional circuit lines and double-layer planar coils that are used as stretchable inductive strain sensors. Hydrogen doping and polymer adsorption at the oxide surface of liquid metal microparticles increase the conductivity and viscoplastic behaviour of the oxide, leading to liquid-metal-based printed circuits with stable resistance up to 500% strain.

We present a multimodal imaging system that seamlessly integrates ultrasound imaging, photoacoustic imaging, and optical coherence tomography using a transparent ultrasonic transducer. We demonstrate the system’s use in imaging responses to mouse body in vivo.

Stretchable electronics has emerged over the past decade and is now expected to bring form factor‐free innovation in the next‐generation electronic devices. Stretchable devices have evolved with the synthesis of new soft materials and new device architectures that require significant deformability while maintaining the high device performance of the conventional rigid devices. As the mismatch in the mechanical stiffness between materials, layers, and device units is the major challenge for stretchable electronics, interface control in varying scales determines the device characteristics and the level of stretchability. This article reviews the recent advances in interface control for stretchable electronic devices. It summarizes the design principles and covers the representative approaches for solving the technological issues related to interfaces at different scales: i) nano‐ and microscale interfaces between materials, ii) mesoscale interfaces between layers or microstructures, and iii) macroscale interfaces between unit devices, substrates, or electrical connections. The last section discusses the current issues and future challenges of the interfaces for stretchable devices., Stretchable electronic devices have diverse interfaces that need to be considered in material design and device fabrication. This article reviews representative approaches to solve the technological issues in stretchable electronic devices, focusing on the interfacial design in different scales (nano/microscale, mesoscale, macroscale). It also discusses the technological advances required for future stretchable device development.

The tactile properties of objects are important for robotic dexterous manipulation. An increasing number of attempts have recently been made to enable tactile information processing in robotic hand via tactile sensors. However, it remains relatively unexplored how to build tactile information processing models. In this study, we aimed to develop a spiking neural network (SNN) based on neural information processing mechanisms in sensory afferents. The SNN processes electrical signals collected from tactile sensor arrays attached to the gripper of the robotic hand while grasping objects with different shapes. We converted each of 42 -channel sensor signals from 2 arrays of 21 sensors into a spike train using the Izhikevich model, which was then fed to the SNN. The synaptic weights of the SNN were learned by the Hebbian learning through pair-based spike timing- dependent plasticity (STDP) algorithm. In addition, we implemented lateral inhibition of the second-layer neurons based on unsupervised learning similar to the one used in self-organizing maps, resulting in a winner-takes-all network. By this unsupervised learning, SNN could learn to discriminate the shape of objects via tactile sensing. In particular, it demonstrated object shape recognition with 100% accuracy. The proposed model could be useful for robots manipulating objects with tactile senses.

There is an ongoing drive to search for low-temperature processed, stable and efficient electron transport layers (ETLs) for perovskite solar cells (PSCs). Herein, we report, for the first time, the use of a MoS2 thin layer as the ETL for PSCs. MoS2 transparent thin films are directly synthesized on the glass/fluorine doped tin oxide (FTO) substrate by using microwave irradiation. The electrical characteristics of the MoS2 thin film are measured and compared with state-of-the-art efficient electron transporting materials like TiO2 and SnO2. The perovskite solar cells fabricated with the device structure, glass/FTO/MoS2/perovskite/po-spiro-OMeTAD/Au, exhibit a power conversion efficiency (PCE) of 13.1%, which is close to the PCEs obtained from compact TiO2 and SnO2 ETL based PSCs. Good transparency in the visible region (400–900 nm), high electrical conductivity and better charge transfer properties as well as low-temperature synthesis make the MoS2 thin film useful for energy harvesting and other optoelectronic device applications.

Post-transition metal dichalcogenides (P-TMDC) are a promising material group for their unique electronic properties and possibilities for high performance transistor and photodetector devices. As a layered p-type semiconductor of this group, silicon telluride (Si2Te3) is an emerging material due to its wide band gap, near-infrared photoluminescence, optical tuning, and resistive switching properties. However, the synthesis and corresponding study on the growth mechanism of Si2Te3 have rarely been reported. In this work, we synthesized Si2Te3 plates on Si substrates using Au particles as a catalyst. The Au particles enabled the liquid phase reaction with Si and Te due to the eutectic alloy formation of Au–Si and Au–Te. This study presents a series of growth mechanisms: (i) Si2Te3 nuclei formed from the eutectic alloy particles, (ii) formation of Te-rich rods overgrown from the Si2Te3 nuclei, (iii) conversion of the Te-rich rods to Si2Te3 rods, and (iv) transformation of the Si2Te3 rods into horizontal Si2Te3 plates. This study provides an understanding of the reaction and growth mechanism of Si2Te3 plates.

Ultrasound transducers, one of the most widely used sensors in the era of the fourth Industrial Revolution, have been recognized and used in a variety of industries including medical, automotive, and robotics. In particular, recent research has focused on the development of multi-mode imaging systems that combine ultrasound and optical imaging to improve the accuracy of information acquisition. Unfortunately, its efficient combination has been severely limited due to the inherent opacity of conventional ultrasound transducers. These limitations cause off-axes between the ultrasound (US) and optical signal paths, resulting in low signal-to-ratio and bulky system. This is especially a critical problem for a photoacoustic (PA) imaging system that requires the ultrasonic transducer to detect the photoacoustic signal. Here, we introduce a newly developed optically transparent ultrasound transducer (TUT) to overcome the limitation. We combined the developed TUT with an optical resolution photoacoustic microscopy (OR-PAM). Using a mouse, we successfully acquired in vivo PA and US images and confirmed the feasibility of the TUT and TUT integrated OR-PAM system.