Search

Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. We discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.

Ionic liquids (ILs) are considered functional electrolytes for the electrocatalytic reduction of CO2 (ECO2R) due to their role in the double-layer structure formation and increased CO2 availability at the electrode surface, which reduces the voltage requirement. However, not all ILs are the same, considering the purity and degree of the functionality of the IL. Further, there are critical experimental factors that impact the evaluation of ILs for ECO2R including the reference electrode, working electrode construction, cosolvent selection, cell geometry, and whether the electrochemical cell is a single compartment or a divided cell. Here, we describe improved synthesis methods of imidazolium cyanopyrrolide IL for electrochemical studies in consideration of precursor composition and reaction time. We explored how IL with cosolvents (i.e. acetonitrile, dimethylformamide, dimethyl sulfoxide, propylene carbonate, and n-methyl-2-pyrrolidone) affects conductivity, CO2 mass transport, and ECO2R activation overpotential together with the effects of electrode materials (Sn, Ag, Au, and glassy carbon). Acetonitrile was found to be the best solvent for lowering the onset potential and increasing the catalytic current density for the production of CO owing to the enhanced ion mobility in combination with the silver electrode. Further, the ECO2R activity of molecular catalysts Ni(cyclam)Cl2 and iron tetraphenylsulfonato porphyrin (FeTPPS) on the carbon cloth electrode maintained high Faradaic efficiencies for CO in the presence of the IL. This study presents best practices for examining nontraditional multifunctional electrolytes amenable to integrated CO2 capture and conversion technologies for homogeneous and heterogeneous ECO2R.

Electrochemical carbon capture and concentration (eCCC) offers a promising alternative to thermochemical processes as it circumvents the limitations of temperature-driven capture and release. This review will discuss a wide range of eCCC approaches, starting with the first examples reported in the 1960s and 1970s, then transitioning into more recent approaches and future outlooks. For each approach, the achievements in the field, current challenges, and opportunities for improvement will be described. This review is a comprehensive survey of the eCCC field and evaluates the chemical, theoretical, and electrochemical engineering aspects of different methods to aid in the development of modern economical eCCC technologies that can be utilized in large-scale carbon capture and sequestration (CCS) processes.

The incorporation of charged groups proximal to a redox active transition metal center can impact the local electric field, altering redox behavior and enhancing catalysis. Vanadyl salen (salen = N,N'-ethylenebis(salicylideneaminato)) complexes functionalized with a crown ether containing a nonredox active metal cation (V-Na, V-K, V-Ba, V-La, V-Ce, and V-Nd) were synthesized. The electrochemical behavior of this series of complexes was investigated by cyclic voltammetry in solvents with varying polarity and dielectric constant (ε) (acetonitrile, ε = 37.5; N,N-dimethylformamide, ε = 36.7; and dichloromethane, ε = 8.93). The vanadium(V/IV) reduction potential shifted anodically with increasing cation charge compared to a complex lacking a proximal cation (ΔE1/2 > 900 mV in acetonitrile and >700 mV in dichloromethane). In contrast, the reduction potential for all vanadyl salen-crown complexes measured in N,N-dimethylformamide was insensitive to the magnitude of the cationic charge, regardless of the electrolyte or counteranion used. Titration studies of N,N-dimethylformamide into acetonitrile resulted in cathodic shifting of the vanadium(V/IV) reduction potential with increasing concentration of N,N-dimethylformamide. Binding constants of N,N-dimethylformamide (log(KDMF)) for the series of crown complexes show increased binding affinity in the order of V-La > V-Ba > V-K > (salen)V(O), indicating an enhancement of Lewis acid/base interaction with increasing cationic charge. The redox behavior of (salen)V(O) and (salen-OMe)V(O) (salen-OMe = N,N'-ethylenebis(3-methoxysalicylideneamine) was also investigated and compared to the crown-containing complexes. For (salen-OMe)V(O), a weak association of triflate salt at the vanadium(IV) oxidation state was observed through cyclic voltammetry titration experiments, and cation dissociation upon oxidation to vanadium(V) was identified. These studies demonstrate the noninnocent role of solvent coordination and cation/anion effects on redox behavior and, by extension, the local electric field.

Developing improved methods for CO2 capture and concentration (CCC) is essential to mitigating the impact of our current emissions and can lead to carbon net negative technologies. Electrochemical approaches for CCC can achieve much higher theoretical efficiencies compared to the thermal methods that have been more commonly pursued. The use of redox carriers, or molecular species that can bind and release CO2 depending on their oxidation state, is an increasingly popular approach as carrier properties can be tailored for different applications. The key requirements for stable and efficient redox carriers are discussed in the context of chemical scaling relationships and operational conditions. Computational and experimental approaches towards developing redox carriers with optimal properties are also described.

Current state-of-the-art thermal technologies for CO2 capture and concentration (CCC) from industrial emissions and air are energetically inefficient. In contrast, electrochemical CCC (eCCC) using redox carriers can theoretically approach 100% efficiency. However, there are currently few oxygen-stable redox carriers suitable for eCCC. Quinone derivatives have previously been studied as redox carriers as they have no affinity for CO2 in the fully oxidized state and an enhanced affinity for CO2 in their reduced states. Unfortunately, the quinones used in prior studies displayed an unfavorable tradeoff between their second reduction potential (E1/2) and CO2 binding constant (KCO2). As a result, reduced quinones that exhibit a sufficient KCO2 for flue gas or atmospheric CO2 capture have E1/2 values negative of the O2/O2•- reduction potential. To improve our understanding of the structural and electronic relationships that correlate KCO2 and E1/2, we report the largest set of quinones that have been experimentally evaluated for their KCO2 and E1/2 properties. The trends in the E1/2 and KCO2 properties were further investigated through extensive quantum chemical calculations to inform experimental carrier design. Notably, we identified structural handles to manipulate E1/2 and KCO2 properties of quinones; however, the altered steric and electronic effects did not disrupt their linear dependence.

Aqueous direct air capture (DAC) is a key technology toward a carbon negative infrastructure. Developing sorbent molecules with water and oxygen tolerance and high CO2 binding capacity is therefore highly desired. We analyze the CO2 absorption chemistries on amines, alkoxides, and phenoxides with density functional theory calculations, and perform inverse molecular design of the optimal sorbent. The alkoxides and phenoxides are found to be more suitable for aqueous DAC than amines thanks to their water tolerance (lower pKa prevents protonation by water) and capture stoichiometry of 1:1 (2:1 for amines). All three molecular systems are found to generally obey the same linear scaling relationship (LSR) between [Formula: see text] and [Formula: see text], since both CO2 and proton are bonded to the nucleophilic (alkoxy or amine) binding site through a majorly [Formula: see text] bonding orbital. Several high-performance alkoxides are proposed from the computational screening. Phenoxides have comparatively poorer correlation between [Formula: see text] and [Formula: see text], showing promise for optimization. We apply a genetic algorithm to search the chemical space of substituted phenoxides for the optimal sorbent. Several promising off-LSR candidates are discovered. The most promising one features bulky ortho substituents forcing the CO2 adduct into a perpendicular configuration with respect to the aromatic ring. In this configuration, the phenoxide binds CO2 and a proton using different molecular orbitals, thereby decoupling the [Formula: see text] and [Formula: see text]. The [Formula: see text] trend and off-LSR behaviors are then confirmed by experiments, validating the inverse molecular design framework. This work not only extensively studies the chemistry of the aqueous DAC, but also presents a transferrable computational workflow for understanding and optimization of other functional molecules.

Local electric fields can alter energy landscapes to impart enhanced reactivity in enzymes and at surfaces. Similar fields can be generated in molecular systems using charged functionalities. Manganese(V) salen nitrido complexes (salen = N,N'-ethylenebis(salicylideneaminato)) appended with a crown ether unit containing Na+ (1-Na), K+, (1-K), Ba2+ (1-Ba), Sr2+ (1-Sr), La3+ (1-La), or Eu3+ (1-Eu) cation were investigated to determine the effect of charge on pKa, E1/2, and the net bond dissociation free energy (BDFE) of N-H bonds. The series, which includes the manganese(V) salen nitrido without an appended crown, spans 4 units of charge. Bounds for the pKa values of the transient imido complexes were used with the Mn(VI/V) reduction potentials to calculate the N-H BDFEs of the imidos in acetonitrile. Despite a span of >700 mV and >9 pKa units across the series, the hydrogen atom BDFE only spans ∼6 kcal/mol (between 73 and 79 kcal/mol). These results suggest that the incorporation of cationic functionalities is an effective strategy for accessing wide ranges of reduction potentials and pKa values while minimally affecting the BDFE, which is essential to modulating electron, proton, or hydrogen atom transfer pathways.

Electric fields underlie all reactions and impact reactivity by interacting with the dipoles and net charges of transition states, products, and reactants to modify the free energy landscape. However, they are rarely given deliberate consideration in synthetic design to rationally control reactivity. This Perspective discusses the commonalities of electric field effects across multiple platforms, from enzymes to molecular catalysts, and identifies practical challenges to applying them in synthetic molecular systems to mediate reactivity.

Electrochemical measurements on tris(cyclopentadienyl)thorium and uranium compounds in the +2, +3, and +4 oxidation states are reported with C5H3(SiMe3)2, C5H4SiMe3, and C5Me4H ligands. The reduction potentials for both U and Th complexes trend with the electron donating abilities of the cyclopentadienyl ligand. Thorium complexes have more negative An(iii)/An(ii) reduction potentials than the uranium analogs. Electrochemical measurements of isolated Th(ii) complexes indicated that the Th(iii)/Th(ii) couple was surprisingly similar to the Th(iv)/Th(iii) couple in Cp''-ligated complexes. This suggested that Th(ii) complexes could be prepared from Th(iv) precursors and this was demonstrated synthetically by isolation of directly from UV-visible spectroelectrochemical measurements and reactions of with elemental barium indicated that the thorium system undergoes sequential one electron transformations.

Numerous redox transformations that are essential to life are catalyzed by metalloenzymes that feature Earth-abundant metals. In contrast, platinum-group metals have been the cornerstone of many industrial catalytic reactions for decades, providing high activity, thermal stability, and tolerance to chemical poisons. We assert that nature's blueprint provides the fundamental principles for vastly expanding the use of abundant metals in catalysis. We highlight the key physical properties of abundant metals that distinguish them from precious metals, and we look to nature to understand how the inherent attributes of abundant metals can be embraced to produce highly efficient catalysts for reactions crucial to the sustainable production and transformation of fuels and chemicals.

Local electric fields contribute to the high selectivity and catalytic activity in enzyme active sites and confined reaction centers in zeolites by modifying the relative energy of transition states, intermediates and/or products. Proximal charged functionalities can generate equivalent internal electric fields in molecular systems but the magnitude of their effect and impact on electronic structure has been minimally explored. To generate quantitative insight into installing internal fields in synthetic systems, we report an experimental and computational study using transition metal (M1) Schiff base complexes functionalized with a crown ether unit containing a mono- or dicationic alkali or alkaline earth metal ion (M2). The synthesis and characterization of the complexes M1 = Ni(ii) and M2 = Na+ or Ba2+ are reported. The electronic absorption spectra and density functional theory (DFT) calculations establish that the cations generate a robust electric field at the metal, which stabilizes the Ni-based molecular orbitals without significantly changing their relative energies. The stabilization is also reflected in the experimental Ni(ii/i) reduction potentials, which are shifted 0.12 V and 0.34 V positive for M2 = Na+ and Ba2+, respectively, compared to a complex lacking a proximal cation. To compare with the cationic Ni complexes, we also synthesized a series of Ni(salen) complexes modified in the 5' position with electron-donating and -withdrawing functionalities (-CF3, -Cl, -H, -tBu, and -OCH3). Data from this series of compounds provides further evidence that the reduction potential shifts observed in the cationic complexes are not due to inductive ligand effects. DFT studies were also performed on the previously reported monocationic and dicatonic Fe(ii)(CH3CN) and Fe(iii)Cl analogues of this system to analyze the impact of an anionic chloride on the electrostatic potential and electronic structure of the Fe site.

Energetically efficient electrocatalysts with high product selectivity are desirable targets for sustainable chemical fuel generation using renewable electricity. Recycling CO2 by reduction to more energy dense products would support a carbon-neutral cycle that mitigates the intermittency of renewable energy sources. Conversion of CO2 to more saturated products typically requires proton equivalents. Complications with product selectivity stem from competitive reactions between H+ or CO2 at shared intermediates. We describe generalized catalytic cycles for H2, CO, and HCO2 - formation that are commonly proposed in inorganic molecular catalysts. Thermodynamic considerations and trends for the reactions of H+ or CO2 at key intermediates are outlined. A quantitative understanding of intermediate catalytic steps is key to designing systems that display high selectivity while promoting energetically efficient catalysis by minimizing the overall energy landscape. For CO2 reduction to CO, we describe how an enzymatic active site motif facilitates efficient and selective catalysis and highlight relevant examples from synthetic systems.

The reaction of Ni(TPAP)(COD) {where TPAP = [(NC5H4)CH2]3P(NC2H4)3N} with Fe(CO)5 resulted in the isolation of the title heterobimetallic NiFe(TPAP)(CO)5 complex di-μ-carbonyl-tricarbon-yl[2,8,9-tris-(pyridin-2-yl-meth-yl)-2,5,8,9-tetra-aza-1-phosphabi-cyclo-[3.3.3]undeca-ne]ironnickel, [FeNi(C24H30N7P)(CO)5]. Characterization of the complex by 1H and 31P NMR as well as IR spectroscopy are presented. The structure of NiFe(TPAP)(CO)5 reveals three terminally bound CO mol-ecules on Fe0, two bridging CO mol-ecules between Ni0 and Fe0, and TPAP coordinated to Ni0. The Ni-Fe bond length is 2.4828 (4) Å, similar to that of the reduced form of the active site of NiFe hydrogenase (∼2.5 Å). Additionally, a proximal pendant base from one of the non-coordinating pyridine groups of TPAP is also present. Although involvement of a pendant base has been cited in the mechanism of NiFe hydrogenase, this moiety has yet to be incorporated in a structurally characterized synthetic mimic with key structural motifs (terminally bound CO or CN ligands on Fe). Thus, the title complex NiFe(TPAP)(CO)5 is an unique synthetic model for NiFe hydrogenase. In the crystal, the complex mol-ecules are linked by C-H⋯O hydrogen bonds, forming undulating layers parallel to (100). Within the layers, there are offset π-π [inter-centroid distance = 3.2739 (5) Å] and C-H⋯π inter-actions present. The layers are linked by further C-H⋯π inter-actions, forming a supra-molecular framework.

Salen ligands (salen = N,N'-ethylenebis(salicylimine)) are well-known for their versatility and widespread utility in chelating metal complexes. However, installation of hydrogen-bonding units on the salen framework, particularly functional groups that require amine-based precursors such as (thio)ureas, is difficult to achieve without the use of protecting group strategies. In this report, we show that the phenylketone analog of salicyladehyde is a stable alternative that enables the facile installation of hydrogen bonding (thio)urea groups on the salen scaffold, thus imparting anion binding abilities to a metal salen complex. Synthesis of symmetric N-phenyl(thio)urea salen ligands functionalized at the 3,3'-position and an unsymmetric salen ligand with N-phenylurea at the 5-position was achieved. Subsequent metalation with nickel (II) acetate afforded the nickel(II) complexes that were investigated for their anion binding properties towards F-, Cl-, Br-, CH3COO-, and H2PO4 -. Solid-state structures of the nickel(II) complexes as well as the Cl- bound dimer of the symmetric urea complex were obtained. The unusual acidity of the (thio)urea groups is reflected in the pKa-dependent anion binding behavior of the nickel(II) complexes, as elucidated by 1H and 19F Nuclear Magnetic Resonance (NMR) spectroscopy and Diffusion Ordered Spectroscopy (DOSY) experiments. [ABSTRACT FROM AUTHOR]

A critical challenge in electrocatalytic CO2 reduction to renewable fuels is product selectivity. Desirable products of CO2 reduction require proton equivalents, but key catalytic intermediates can also be competent for direct proton reduction to H2 Understanding how to manage divergent reaction pathways at these shared intermediates is essential to achieving high selectivity. Both proton reduction to hydrogen and CO2 reduction to formate generally proceed through a metal hydride intermediate. We apply thermodynamic relationships that describe the reactivity of metal hydrides with H+ and CO2 to generate a thermodynamic product diagram, which outlines the free energy of product formation as a function of proton activity and hydricity (∆GH-), or hydride donor strength. The diagram outlines a region of metal hydricity and proton activity in which CO2 reduction is favorable and H+ reduction is suppressed. We apply our diagram to inform our selection of [Pt(dmpe)2](PF6)2 as a potential catalyst, because the corresponding hydride [HPt(dmpe)2]+ has the correct hydricity to access the region where selective CO2 reduction is possible. We validate our choice experimentally; [Pt(dmpe)2](PF6)2 is a highly selective electrocatalyst for CO2 reduction to formate (>90% Faradaic efficiency) at an overpotential of less than 100 mV in acetonitrile with no evidence of catalyst degradation after electrolysis. Our report of a selective catalyst for CO2 reduction illustrates how our thermodynamic diagrams can guide selective and efficient catalyst discovery.

The immobilization of molecular species onto electrodes presents a direct route to modifying surface properties with molecular fidelity. Conventional methods include direct covalent attachment and physisorption of pyrene-appended molecular compounds to electrodes with aromatic character through π-π interactions. A recently reported hybrid approach extends the synthetic flexibility of the latter to a broader range of electrode materials. We report an application of this approach to immobilization of pyrene-appended ferrocene onto pyrene-functionalized indium tin oxide (ITO). The modified ITO surfaces were characterized using X-ray photoelectron spectroscopy, fluorescence spectroscopy, and electrochemical techniques. An electron-transfer rate constant ( kapp) of 100 ± 8 s-1 was measured between the electrode and immobilized ferrocene using electrochemical methods. For comparison, a ferrocene-modified electrode using conventional covalent attachment of vinylferrocene was also prepared, and kapp was measured to be 9 ± 2 s-1.

Water oxidation is catalysed in Nature by a redox cofactor embedded in a hydrogen-bonded network designed to orchestrate proton transfer throughout the challenging 4 electron reaction. In order to mimic aspects of this microenvironment, [CoLDMA(CH3CN)2][BF4]2 (2) was synthesized, where LDMA is a dipyridyldiamine ligand with two dimethylamine bases in the secondary coordination sphere. Structural characterization of the corresponding aqua complexes establish hydrogen bonding between the bound water and pendant base(s). Cyclic voltammetry of [CoLDMA(CH3CN)2][BF4]2 (2) reveals enhanced oxidative current upon titration with water and controlled potential electrolysis confirms evolution of O2. The related complex [CoLH(CH3CN)2][BF4]2 (1), which has the same primary coordination environment as 2 but lacks pendant bases, is inactive. The structural and electrochemical studies illustrate the role positioned proton relays can play in promoting redox reactivity.

The synthesis and characterization of the Schiff base complexes Fe(ii) (2M) and Fe(iii)Cl (3M), where M is a K+ or Ba2+ ion incorporated into the ligand, are reported. The Fe(iii/ii) redox potentials are positively shifted by 440 mV (2K) and 640 mV (2Ba) compared to Fe(salen) (salen = N,N'-bis(salicylidene)ethylenediamine), and by 70 mV (3K) and 230 mV (3Ba) compared to Fe(Cl)(salen), which is likely due to an electrostatic effect (electric field) from the cation. The catalytic activity of 3M towards the aerobic oxidation of allylic C-H bonds was explored. Prior studies on iron salen complexes modified through conventional electron-donating or withdrawing substituents found that only the most oxidizing derivatives were competent catalysts. In contrast, the 3M complexes, which are significantly less oxidizing, are both active. Mechanistic studies comparing 3M to Fe(salen) derivatives indicate that the proximal cation contributes to the overall reactivity in the rate determining step. The cationic charge also inhibits oxidative deactivation through formation of the corresponding Fe2-μ-oxo complexes, which were isolated and characterized. This study demonstrates how non-redox active Lewis acidic cations in the secondary coordination sphere can be used to modify redox catalysts in order to operate at milder potentials with a minimal impact on the reactivity, an effect that was unattainable by tuning the catalyst through traditional substituent effects on the ligand.

Water oxidation is catalysed in Nature by a redox cofactor embedded in a hydrogen-bonded network designed to orchestrate proton transfer throughout the challenging 4 electron reaction. In order to mimic aspects of this microenvironment, [CoLDMA(CH3CN)2][BF4]2 (2) was synthesized, where LDMA is a dipyridyldiamine ligand with two dimethylamine bases in the secondary coordination sphere. Structural characterization of the corresponding aqua complexes establish hydrogen bonding between the bound water and pendant base(s). Cyclic voltammetry of [CoLDMA(CH3CN)2][BF4]2 (2) reveals enhanced oxidative current upon titration with water and controlled potential electrolysis confirms evolution of O2. The related complex [CoLH(CH3CN)2][BF4]2 (1), which has the same primary coordination environment as 2 but lacks pendant bases, is inactive. The structural and electrochemical studies illustrate the role positioned proton relays can play in promoting redox reactivity.

The preparation and characterization of a series of isostructural cobalt complexes [Co(t-Bu)2P(E)Py(E)P(t-Bu)2(CH3CN)2][BF4]2 (Py = pyridine, E = CH2, NH, O, and X = BF4 (1a-c)) and the corresponding one-electron reduced analogues [Co(t-Bu)2P(E)Py(E)P(t-Bu)2(CH3CN)2][BF4]2 (2a-c) are reported. The reactivity of the reduced cobalt complexes with CO2, CO, and H(+) to generate intermediates in a CO2 to CO and H2O reduction cycle are described. The reduction of 1a-c and subsequent reactivity with CO2 was investigated by cyclic voltammetry, and for 1a also by infrared spectroelectrochemistry. The corresponding CO complexes of (2a-c) were prepared, and the Co-CO bond strengths were characterized by IR spectroscopy. Quantum mechanical methods (B3LYP-d3 with solvation) were used to characterize the competitive reactivity of the reduced cobalt centers with H(+) versus CO2. By investigating a series of isostructural complexes, correlations in reactivity with ligand electron withdrawing effects are made.

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode–electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation. [ABSTRACT FROM AUTHOR]

Energy storage and conversion schemes based on environmentally benign chemical fuels will require the discovery of faster, cheaper, and more robust catalysts for the oxygenevolution reaction (OER). Although the incorporation of pendant bases into molecular catalysts for hydrogen production and utilization has led to enhanced turnover frequencies, the analogous incorporation of pendant bases into molecular catalysts for water oxidation has received little attention. Herein, the syntheses, structures, and catalytic activities of new iron complexes with pendant bases are reported. Of these new complexes, [Fe(L1)]2+ {L1 = N,N'-dimethyl-N,N'- bis(pyridazin-3-ylmethyl)ethane-1,2-diamine} is the most active catalyst. Initial turnover frequencies of 141 and 24 h-1 were measured by using ceric ammonium nitrate at pH 0.7 and sodium periodate at pH 4.7, respectively. These results suggest that the incorporation of pendant bases into molecular catalysts for water oxidation might be an effective strategy that can be considered in the development of new catalysts for the OER, but will require the careful balance of many factors. © 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A molecular cobalt CO2 hydrogenation catalyst was explored for electrocatalytic CO2 reduction under aqueous conditions. The resulting pH-dependent selectivity between H2 and HCO2− is rationalized with thermodynamic analysis and stoichiometric experiments. [ABSTRACT FROM AUTHOR]