Search

In southern Africa, heat treatment of silcrete is documented by ~ 164 ka and is considered an important technological innovation, allowing knappers to improve the flaking properties of rocks for lithic blank production. Previous research has explored structural, mechanical, and geochemical changes in silcrete during heat treatment, but most studies have not explored the implications of those transformations for the blanks produced. Experiments that have examined the effects of heat treatment on blank production tend to rely on replicative flintknapping, where small changes in the way a blank is removed can create “noise.” In this study, we provide quantitative data to understand the effects of silcrete source and heating temperature on blank production using a flaking machine to isolate the effects of heat treatment on blank morphology. Our results show changes in absolute blank dimensions, and in the frequency of abrupt terminations as a result of heat treatment. However, the benefits of heat treatment may only occur within a limited temperature range and are heavily source dependent. This suggests that we should reconsider broad generalizations about the role of heat treatment in lithic technology and its supposed benefits and focus more on silcrete source and source-based effects on blank production. [ABSTRACT FROM AUTHOR]

The bipolar technique has been widely used across a wide range of prehistoric contexts, from the Lower Pleistocene to the Metal Ages, and is a defining feature of the Uluzzian technocomplex, evident in the Early Upper Palaeolithic of Italy and Greece. The objective of this paper is to examine whether the use of the bipolar technique within the Uluzzian extends beyond its conventional definition as a mere technique. To address this question, we conducted goal-orientated experimental flaking, focusing on the industries found at key Uluzzian sites in Italy: Broion, La Fabbrica, and Castelcivita. A comprehensive review of archaeological and ethnographic evidence further supplemented our study on the application of the bipolar technique. While bipolar reduction typically involves less procedural control, resulting in a diverse range of blanks, our research shows that adhering to certain discernible principles can indeed exert control over specific morphological features of the resulting products. Factors such as blank selection and configuration, along with the management of volumes and edges, contribute to high productivity, the generation of elongated products, and miniaturization as distinctive characteristics. These findings collectively establish the bipolar reduction on an anvil in the Uluzzian as a systematic method of debitage. [ABSTRACT FROM AUTHOR]

Around 8200 years ago, the Storegga tsunami hit the west coast of South Norway. The physical extent of the tsunami has been well documented but the consequences of the event for contemporary societies have received little attention beyond broad generalizations and, more recently, demographic studies based on statistical modeling of radiocarbon dates. In this paper, we explore whether the different physical impacts of the Storrega tsunami could have initiated observed regional developments in lithic technology. We have analyzed lithic assemblages from 30 carefully selected Middle and Late Mesolithic sites (dated between c. 7500 and 5000 cal BC) spread across six designated "focus areas" along the coast of western South-Norway. We identified five blade production concepts in use during the Late Mesolithic and highlight potentially significant differences in their spatial and temporal distribution. Although neither the tsunami nor the environmental stresses experienced by Mesolithic communities appear to have prompted large breaks in traditional practices, we suggest that the event marks a point in time from where specific differences and modifications in lithic technology start developing at a local scale. We argue that sudden, yet transitory events such as the Storegga tsunami, may rupture the historical contingency of social networks and communication lines resulting in changing social contexts influencing material change. [ABSTRACT FROM AUTHOR]

This article presents the results of research carried out at two previously unreported Eastern Desert Atbara River project (EDAR) Middle Stone Age (MSA) sites—EDAR 134 and EDAR 155. Luminescence dating results indicate human activity in this area during the Marine Isotope Stage 5 period (MIS 5), approximately 90 kya. Discussion concerning the affiliation of both analyzed inventories will be provided, including another MSA site from the EDAR area, where an assemblage dated to MIS 6/5e does not have technological features known from other technocomplexes in the eastern Sahara region (EDAR 135). Microscopic analysis of traces of tool use for the EDAR 155 assemblage shows the high impact of post-depositional (aeolian) processes on the state of preservation of lithic material. Sites EDAR 134 and 155 provide evidence for hominin activity during the late Pleistocene within an area only episodically accessible, due to arid conditions prevailing in the Saharan deserts. [ABSTRACT FROM AUTHOR]

Evaluating the links between South American Amerindian ontologies and the contextual study of knapped lithic technology is the main goal of this paper. To this end, we focus on a study case from eastern Catamarca province, Argentina, during the 1st millennium A.D. We identified projectile points in only one context, a rock art rock shelter (Oyola 7), while in other archaeological sites in the area, we have not recorded this type of stone tool. Drawing on ethnohistoric and ethnographic data regarding the connection between arrows and shamanic practices of illness and healing, we propose considering the agencies of these objects, as well as their intrinsic danger and their multiple possibilities of affecting beyond their traditional functional interpretation. [ABSTRACT FROM AUTHOR]

Fifty years have passed since the first systematic archaeological surveys and excavations were conducted in Lutruwita (Tasmania). Despite numerous Late Pleistocene archaeological discoveries in the southwest region, no indisputable pre‐Holocene sites have been found in eastern Tasmania. This profound difference raises questions about how Aboriginal people utilised the Lutruwita landscape; first as a projecting peninsula into the Southern Ocean and then as an island cut off by rising seas c.14000 years ago. To examine the difference between east and west further, legacy data excavated by one of us (RJ) in 1964 at the Oatlands OL1 site and stored at the Tasmanian Museum and Art Gallery (TMAG) has been analysed. The results of pXRF chemical analysis of artefact raw material, radiocarbon dating and studies of faunal remains have produced information that highlights the Holocene interaction between people in eastern Lutruwita. Despite the current lack of Late Pleistocene evidence from eastern Lutruwita, this pattern appears to be different from land use models for Late Pleistocene southwestern Lutruwita. With new information from the OL1 rock shelter site we can now contrast the Late Pleistocene hunting economics with the exceptionally well‐preserved faunal remains found in the Holocene site, OL1. [ABSTRACT FROM AUTHOR]

The bipolar technique is a flaking strategy that has been identified from 3.3 Ma until the twentieth century, with no geographical or chronological homogeneous distribution. It is represented by the intentional contact of an active percussive element against a core rested on an anvil. This tool composite has been described by some researchers as a sign of low-skill of hominins, unable to perform successfully free-hand flaking or for flaking low-quality raw materials. Based on this premise, our research focused on the following question: Are there any quantitative and qualitative differences in terms of both kinematic parameters and technical skills between knappers with different levels of expertise when flaking using the bipolar technique? To get an answer, we developed a systematic experimental program with 12 volunteer participants with different levels of expertise. Then, to assess potential quantifiable differences and to understand the mechanics of bipolar technology, we did a video motion analysis based on kinematic parameters (including position, velocity, acceleration, and kinetic energy of the hammerstone). In addition, we performed a technological analysis of the experimental lithic assemblages to assess the technological differences between knappers based on their levels of expertise. In kinematic parameters, both statistical analysis and observations from the experiment clearly show that there are differences between the levels of expertise in this technique. Intermediate knappers have been observed to apply more velocity and kinetic energy than experts and novices. Also, differences were observed in the flaking strategies. Expert knappers show a longer reduction sequence, while intermediates show shorter one. Moreover, some of the novice knappers did not even obtain a single flake. The results of our experiment stress the complexity of bipolar flaking and that previous assumptions about it might be reconsidered, especially in terms of reconsidering the negative connotations attributed to this flaking technique. [ABSTRACT FROM AUTHOR]

Archaeological investigations worldwide have focused on when and how humans permanently settled in high-altitude environments. Recent evidence from Xiada Co, Qusongguo, and Dingzhonghuzhuzi in western Tibet, where lithic artifacts and radiocarbon dates with original deposits were first accessed, provides new insights into human activities in this extreme environment during the early Holocene. This paper examines the mobility and land-use patterns of foragers in western Tibet from the perspectives of lithic analysis. Assemblages from three sites suggest homogenous technologies and raw material use, as well as potential interaction network of hunter-gatherers within the plateau during the early Holocene. It further argues that the material exponents and travel cost models of site location supported permanent occupation of the western Tibetan Plateau in this period. [ABSTRACT FROM AUTHOR]

We present a series of 12 OSL/IRSL dates that revise and complete the chronology of the important Middle (MSA) and Later Stone Age (LSA) site Umbeli Belli in KwaZulu-Natal, South Africa. These dates shift the previous radiometric ages thousands of years older than earlier measurements and play a key role in revising the cultural stratigraphy of KwaZulu-Natal. We also discuss how these dates bring the chrono- and cultural stratigraphy of southern Africa into clearer focus. The Robberg sequence of Umbeli Belli is now firmly dated to 21 ± 2 ka, whereas the preceding Early LSA assemblage dates to ~32 ka, representing one of the earliest dates for this cultural expression in the broader region. The final MSA assemblages from Layer 7 to 9 now date to between 35 ka and 40 ka, overlapping more tightly with comparable assemblages from Sibhudu, Umhlatuzana and other sites. Layer 10, which was previously also assigned to the final MSA, now dates to ~47-54 ka, placing the assemblage within the temporal range of the Late MSA. The new dates provide a good explanation for the clear differences in material culture between Layer 10 and the younger layers. We also present two new ages for the deeper horizons 11b and 12 at Umbeli Belli, dating to 76 ± 9 ka and 80 ± 9 ka, respectively. [ABSTRACT FROM AUTHOR]

Copyright of Intersecciones en Antropología is the property of Universidad Nacional del Centro de la Provincia de Buenos Aires, Facultad de Ciencias Sociales and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Lithic technological organisation within the southern Africa Early Middle Stone Age (∼315,000–80,000 years ago) has seen relatively little investigation owing to the subtly of technological change, frequent use of locally derived raw materials, and the archaeological spatio-temporal discontinuity. This has resulted in relatively limited use of explanatory models for technological variability, including mobility, provisioning, tool production, and core reduction strategies. This paper uses 2952 artefacts to test the lithic technological organisation across Marine Isotope Stage 5 units of Mertenhof Rockshelter. Here we argue that the scales and concepts currently used to approach Early Middle Stone Age technology requires reconsideration. The Mertenhof sequence exhibits high proportions of non-local raw materials with their transport reflective of tactical adjustments within relatively stable mobility, provisioning, and reduction strategies. We demonstrate that Early Middle Stone Age populations maintained a diverse array of tactical solutions across these strategic domains, offering a durable and flexible strategy that would be adapted to changing contexts.

Abstract The Aurignacian is the first European technocomplex assigned to Homo sapiens recognized across a wide geographic extent. Although archaeologists have identified marked chrono-cultural shifts within the Aurignacian mostly by examining the techno-typological variations of stone and osseous tools, unraveling the underlying processes driving these changes remains a significant scientific challenge. Scholars have, for instance, hypothesized that the Campanian Ignimbrite (CI) super-eruption and the climatic deterioration associated with the onset of Heinrich Event 4 had a substantial impact on European foraging groups. The technological shift from the Protoaurignacian to the Early Aurignacian is regarded as an archaeological manifestation of adaptation to changing environments. However, some of the most crucial regions and stratigraphic sequences for testing these scenarios have been overlooked. In this study, we delve into the high-resolution stratigraphic sequence of Grotta di Castelcivita in southern Italy. Here, the Uluzzian is followed by three Aurignacian layers, sealed by the eruptive units of the CI. Employing a comprehensive range of quantitative methods—encompassing attribute analysis, 3D model analysis, and geometric morphometrics—we demonstrate that the key technological feature commonly associated with the Early Aurignacian developed well before the deposition of the CI tephra. Our study provides thus the first direct evidence that the volcanic super-eruption played no role in this cultural process. Furthermore, we show that local paleo-environmental proxies do not correlate with the identified patterns of cultural continuity and discontinuity. Consequently, we propose alternative research paths to explore the role of demography and regional trajectories in the development of the Upper Paleolithic.

Through phylogenetic reconstruction this work  analyzes the  diversification of  lanceolate points of the South Central Andes   which began in the early Holocene and spanned the entire mid- Holocene. Based on a regional-scale data, we   discuss the links between the increasing mid-Holocene risk conditions, the patterns of diversification of point lineages, demographic change and animal resources consumption. We distinguish a first instance of greater diversity of points, a higher rate of innovation and less class longevity. These trends progressively stabilized, giving rise to a pattern of  less innovation, decreasing taxa diversity  and greater class longevity as well as an age-related extinction pattern. We show that as projectile points diversified,hunting efficiency increased along the mid-Holocene by the increased representation of  high-return fauna in the regional zooarchaeological record.  We suggest that this diversification of  lanceolate points was an adaptive evolutionary radiation which began with the increase in the rate of innovation for coping with the increasing risk of the beginning of mid-Holocene in the South Central Andes. From this we conclude that technological innovation was a prerequisite for the human specialization in camelid hunting and for the development of a highly economically efficient foraging strategy in the south Andean  highlands

The Aurignacian is the first European technocomplex assigned to Homo sapiens recognized across a wide geographic extent. Although archaeologists have identified marked chrono-cultural shifts within the Aurignacian mostly by examining the techno-typological variations of stone and osseous tools, unraveling the underlying processes driving these changes remains a significant scientific challenge. Scholars have, for instance, hypothesized that the Campanian Ignimbrite (CI) super-eruption and the climatic deterioration associated with the onset of Heinrich Event 4 had a substantial impact on European foraging groups. The technological shift from the Protoaurignacian to the Early Aurignacian is regarded as an archaeological manifestation of adaptation to changing environments. However, some of the most crucial regions and stratigraphic sequences for testing these scenarios have been overlooked. In this study, we delve into the high-resolution stratigraphic sequence of Grotta di Castelcivita in southern Italy. Here, the Uluzzian is followed by three Aurignacian layers, sealed by the eruptive units of the CI. Employing a comprehensive range of quantitative methods—encompassing attribute analysis, 3D model analysis, and geometric morphometrics—we demonstrate that the key technological feature commonly associated with the Early Aurignacian developed well before the deposition of the CI tephra. Our study provides thus the first direct evidence that the volcanic super-eruption played no role in this cultural process. Furthermore, we show that local paleo-environmental proxies do not correlate with the identified patterns of cultural continuity and discontinuity. Consequently, we propose alternative research paths to explore the role of demography and regional trajectories in the development of the Upper Paleolithic. [ABSTRACT FROM AUTHOR]

We describe an analysis of the flaked stone tools recovered from households in the Postclassic central Mexican city of Calixtlahuaca (a.d. 1130–1530). Most artifacts are obsidian and represent the blade-core technology, but biface and bipolar artifacts are also represented. Even though household residents were involved in limited biface and bipolar reduction, it appears that the city did not have any resident blade producers. This finding is at odds with the views of many archaeologists, who tend to associate craft production with the emergence of complex Mesoamerican urban centers. We examine the technologies from temporally distinct Calixtlahuacan household assemblages. We discuss why the quantity and quality artifacts associated with blade production are not consistent with resident blade making in the city. Finally, we examine four models for blade provisioning: (1) whole-blade trade, (2) processed-blade trade, (3) long-distance itinerant craftsmen, and (4) local, hinterland-based craftsmen. Evaluating how the Calixtlahuacans got their flaked stone tools has important implications for the comparative understanding of the organization and scale of economic provisioning systems in Postclassic central Mexico. This analysis supports new inferences about the nature of commercial networks that supplied the Toluca Valley prior to the arrival of the Spanish in the sixteenth century. [ABSTRACT FROM AUTHOR]

The Mumba rockshelter, located in the northwest of Lake Eyasi is key to understanding the Stone Age in East Africa. The stratigraphy of the site spans the last 130 ka BP and comprises levels from the Middle Stone Age, the Later Stone Age, the Pastoral Neolithic, and the Iron Age. In terms of the Middle Stone Age (MSA), Mumba has helped to define two lithic industries: Sanzako (130 ka BP) and Kisele (90–50 Ka BP) that characterize this techno-complex in northern Tanzania. The Sanzako industry was defined based on level VI-B at Mumba, which was excavated in 1938 by Köhl-Larssen. Here we present the study of the lithic assemblage excavated by Mehlman between 1977 and 1981. Mehlman subdivided this unit into three sublevels (Lower, Middle, and Upper), all of which remained unanalyzed and therefore, unpublished. The main features of the lithic assemblages found in the three sublevels are the presence of discoid, Levallois, and bipolar knapping methods. Additionally, the retouched tools are mainly sidescrapers, denticulates, and notches. This recent research enables us to understand the Sanzako industry in more detail, as well as its nature within the chronocultural framework of the MSA in northern Tanzania. [ABSTRACT FROM AUTHOR]

Major changes in lithic technologies are often explained by either migration or crisis. Here we argue that continuity and minor adjustments in lithic production can tell equally dramatic tales of altered social situations. We base our interpretations on identified lithic blade production concepts and raw materials at 30 sites dating 7500–5000BC, i.e. from before and after the massive Storegga tsunami hit the coast of western South-Norway around 6150BC. Regional continuation, but also local variations in lithic production are interpreted inspired by a machine-oriented ontological framework. The tsunami disrupts the environment, society and its lithic traditions are affected. Although no immediate major breaks are observed, sometime after the tsunami, societies or lithic production as ‘machines’ in separate regions had begun to hum to different tunes. We suggest that variation in tsunami impact had created differing local social contexts which in turn pushed the lithic traditions down diverging paths. [ABSTRACT FROM AUTHOR]

Copyright of Revista del Museo de Antropología is the property of Museo de Antropologia - IDACOR and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The pressure knapping technique develops circa 25,000 cal BP in Northeast Asia and excels at producing highly standardized microblades. Microblade pressure knapping spreads throughout most of Northeast Asia up to the Russian Arctic, and Alaska, in areas where the human presence was unknown. Swan Point CZ4b is the earliest uncontested evidence of human occupation of Alaska, at around 14,000 cal BP. It yields a pressure microblade component produced with the Yubetsu method, which is widespread in Northeast Asia during the Late Glacial period. Through the techno-functional analysis of 634 lithic pieces from this site, this study seeks to identify the techno-economical purposes for which the Yubetsu method was implemented. Data show that the microblade production system is related to an economy based on the planning of future needs, which is visible through blanks standardization, their overproduction, their functional versatility, and the segmentation of part of the chaîne opératoire. This expresses the efficiency and economic value of the microblade production system. The flexible use of pressure microblades identified at Swan Point CZ4b is also found in Japan, Korea, Kamchatka, and the North Baikal region, suggesting that their modes of use accompany the spread of early microblade pressure knapping over an immense territory across Beringia. [ABSTRACT FROM AUTHOR]

A growing number of authors have discussed the role of climate change in periods of important biological and cultural transition along the hominin lineage. This paper establishes a biocultural framework elucidating human behavioural adaptations during the African Early and Middle Stone Age, centred on three crucial dimensions of hunter-gatherer adaptation: mobility, social network dynamics, and technology. We contend that landscape properties, specifically resource diversity and seasonal to inter-annual resource variability, can be used to model the specific responses of hominin groups to climate change over time, based on their awareness of these properties. Specifically, we focus on hominin technological generalisation and specialisation, meaning the extent to which there is a high degree of specificity (or fit) between final tool form and the task(s) in which the tool is deployed.In this regard, we argue that the archaeological record reveals punctuated and discontinuous specialisation during certain phases of the Early Stone Age driven by landscape predictability. These periods encourage the expression of relevant innovations and stepwise increases in technological complexity. While some of them become lost to demographic or cultural stochasticity, others end up forming the basis for a standardisation of generalised forms within the context of unexpected climatic deterioration. This is highlighted by the late Acheulean: following a period of greater generalisation in the late Early Pleistocene correlating with repeated and severe orbitally-forced periods of aridity, smaller biface forms become more common (or absent) and regional experimentation with prepared-core technology in Eastern Africa takes place in the context of a return to more humid and stable climatic conditions. The onset of more arid and variable climates associated with the emergence of the Middle Stone Age led to the continental expansion of the prepared-core technological substrate underpinning generalised assemblages. The cycle continues in the Middle Stone Age with a return to climatic stability in the Late Pleistocene and subsequent regional diversification of this techno-complex, in which hominins responded with greater toolkit specialisation in a number of different ways. In this context, we support the existence of a cyclical and non-linear relationship between environmental adaptation and cognitive evolution, as part of a wider biocultural feedback loop, which contributes to explain the evolutionary roots of our “generalist specialist” niche.

We present a series of 12 OSL/IRSL dates that revise and complete the chronology of the important Middle (MSA) and Later Stone Age (LSA) site Umbeli Belli in KwaZulu-Natal, South Africa. These dates shift the previous radiometric ages thousands of years older than earlier measurements and play a key role in revising the cultural stratigraphy of KwaZulu-Natal. We also discuss how these dates bring the chrono- and cultural stratigraphy of southern Africa into clearer focus. The Robberg sequence of Umbeli Belli is now firmly dated to 21 ± 2 ka, whereas the preceding Early LSA assemblage dates to ~32 ka, representing one of the earliest dates for this cultural expression in the broader region. The final MSA assemblages from Layer 7 to 9 now date to between 35 ka and 40 ka, overlapping more tightly with comparable assemblages from Sibhudu, Umhlatuzana and other sites. Layer 10, which was previously also assigned to the final MSA, now dates to ~47–54 ka, placing the assemblage within the temporal range of the Late MSA. The new dates provide a good explanation for the clear differences in material culture between Layer 10 and the younger layers. We also present two new ages for the deeper horizons 11b and 12 at Umbeli Belli, dating to 76 ± 9 ka and 80 ± 9 ka, respectively. Significance: • Revised and new age estimates are given for the Middle and Later Stone Age sequence of Umbeli Belli. • These age changes allow new comparisons with nearby prehistoric sites. • They change our view of the regional variability of technologies and cultures between ca. 80 and 20 ka on the east coast of South Africa.

Sharbithat 10 (SHA-10) was discovered in 2017 during the first extensive survey of the northern part of the Dhofar region. Located on a vast mesa surrounded by wadi deltaic branches and abundant sources of flint, SHA-10 is characterized by flint scatters, dwellings, and cairns. Initial test trenches revealed a single period stratification sequence, highlighting a rich marine faunal composition and intense flintknapping activity. The fishing equipment, typical of coastal sites from this period, accompanies a distinctive lithic industry comprising blades, backed pieces, and tanged points. Through the study of technological processes leading to the manufacture of these artefacts, analysis of the points’ morphological variability, and examination of the prevalence of backed bladelets, new hypotheses regarding coastal subsistence strategies and chronological issues have emerged. However, the potential co-occurrence of different facies complicates a chronological definition which can be partly clarified by radiocarbon data results. In this communication, we present a preliminary study of this unique assemblage, discuss its chrono-typological implications, and explore their significance within the framework of South Arabian prehistory.

Eastern Africa maintains a key position in debates surrounding the emergence of Homo sapiens across Africa. Extensive research in the region has revealed a rich fossil record in association with a 'generic' but variable Middle Stone Age (MSA) material culture, providing an important laboratory for testing hypotheses about the behavioural evolution of our species. For example, multiple archaeological studies of the eastern African MSA note a link between the distribution and density of sites, archaeological diversity and environmental conditions, with ecology and demography often cited as key drivers of cultural evolution. This article formulates new hypotheses using theoretical models of complex fitness landscapes of evolution and reviews the archaeological and climatic records of Middle-late Pleistocene eastern Africa in the light of these ideas. It proposes that evidence from eastern Africa implicates much of the region as a refugial zone within Pleistocene Africa, providing consistently suitable conditions for survival that were characterised by high and changing biodiversity, facilitating population growth and interconnectivity as well as material culture diversification. Interactions between different evolutionary processes likely resulted in the complex cultural mosaic observed across Africa, including the appearance of 'specific' innovations against a backdrop of more 'generic' MSA elements. [ABSTRACT FROM AUTHOR]

The terminal Pleistocene witnessed significant paleoclimatic changes that influenced the adaptive behavior of human populations. Situated in the tropical-subtropical zone of Southwest China, a newly excavated cave site, Fodongdi, revealed evidence for substantive changes in technology between 18.37 to 13.85 cal ka BP. Here, we present the results of a technological analysis on lithic assemblage formation across three main sequential phases at Fodongdi Cave. Diachronic changes in lithic technology document the co-existence of diverse reduction techniques and toolkits, corresponding with climatic fluctuations over a five-thousand-year period. [ABSTRACT FROM AUTHOR]

Copyright of Documenta Praehistorica is the property of Documenta Praehistorica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aims to evaluate the functionality of a sample of lithic tools from a multiproxy perspective. The artifacts come from a mid-Holocene hunter-gatherers’ occupation of the La Mesada site in Patagonia. The perspective involves the examination of use-wear traces, hafting wear, and organic micro-residues. The experimental program that supports this perspective is presented. Use-wear traces and organic residues were recognized in the distal portion of the archaeological artifacts. Meanwhile, some tools, in the proximal and middle portion, present alterations attributable to hafting in combination with animal and vegetable residues. The production sequence of a particular artifact design is discussed, with distinctive aspects regarding regional trends. Practices related to plant management were identified that allow the evaluation of mobility circuits and interchange mechanisms of these societies.

Archaeological investigations worldwide have focused on when and how humans permanently settled in high-altitude environments. Recent evidence from Xiada Co, Qusongguo, and Dingzhonghuzhuzi in western Tibet, where lithic artifacts and radiocarbon dates with original deposits were first accessed, provides new insights into human activities in this extreme environment during the early Holocene. This paper examines the mobility and land-use patterns of foragers in western Tibet from the perspectives of lithic analysis. Assemblages from three sites suggest homogenous technologies and raw material use, as well as potential interaction network of hunter-gatherers within the plateau during the early Holocene. It further argues that the material exponents and travel cost models of site location supported permanent occupation of the western Tibetan Plateau in this period.

The authors studied 36 obsidian-tipped spears in the Oceania collection of the Museum of Ethnography in Budapest. In addition to describing the objects from the Admiralty Islands collected before 1897, the paper provides a summary of the related ethnographic information, including the technological and technical details of spear point making and the characterisation of the obsidian raw material used. The blades used for making the obsidian points presented in this study showed no sign of standardisation (an indicator of advanced blade technology) in the spear point-making process. According to 19th-century ethnographic sources, the functional part of the points was the most important, and much time and effort were invested in ensuring that the blades were effective weapons. Later, as a sign of decline, primary production of obsidian blades ceased, and manufacturers started scavenging old artefacts and utilising waste and by-products. As a result, the blades decreased in size and became more irregular, and an increasingly large number included parts of the cortex, the crust of obsidian. After 1911, the relative importance of decoration increased, and the type became more standardised. The irregular shape of the spear points presented in the study and the thin, weak shafts with an awkward curvature raise questions about whether the spears were actual weapons. At the same time, the artistic decoration of the mounting sockets and ethnographic parallels suggest that the pieces in the collection were likely status objects instead.

In southern Africa, the Howiesons Poort is one of the earliest technocomplexes in which small blades and bladelets were systematically produced and retouched into formal tools. While the presence of small lithic artefacts in an assemblage is welldocumented, little is known about production pathways. This paper reports on the analysis of the lithic assemblage from Horizon 6/7 of Charles Keller's excavations of Montagu Cave, South Africa, to evaluate how raw material and decision-making affects the size of stone tools in Howiesons Poort assemblages. It addresses the following questions: how were small blades produced? Was it a deliberate choice or a constraint imposed by raw material availability? Results show branching modes of production for large and small blanks beginning with raw material acquisition. The independent production of small blanks is reinforced by the presence of cores on flakes in the assemblage. However, a relatively standardised core reduction process was used consistently, regardless of core size. The main technological and typological features observed in Horizon 6/7 are in line with other known Howiesons Poort assemblages. Considered as a whole, these observations highlight the consistency of Howiesons Poort blade technology and the deliberate production of small blanks and tools. [ABSTRACT FROM AUTHOR]

Although much research has been conducted on the Late Postclassic period Maya, there has been relatively less study of the role of economic activities in political management during this period. Many such studies focused on obsidian analysis and technology as proxies for trade and exchange. This article builds on that research, using a legacy collection of obsidian implements collected during archaeological surveys in the 1970s to examine Late Postclassic period (AD 1200–1524) economic networks in the K'iche' region. Obsidian collections from the site of Q'umarkaj and the surrounding region were examined through technological and geochemical analyses. I find that during the Late Postclassic period, K'iche' elites had more access to nonlocal obsidian sources than did non-elites, but that access to locally available sources was managed through independent and diverse acquisition networks. Thus, the K'iche' elite were not dependent on local economies as a main source of political power. [ABSTRACT FROM AUTHOR]

Shaped stone balls (SSBs) were an integral part of human culture across the Old World for nearly 2 million years. They are one of the oldest implements made and used by humans. In this significant era, which was characterised by biological and cultural transformations, these round implements were a stable hallmark throughout the Lower Paleolithic period and beyond. However, while much research progress has been made in other stone tool categories, and despite the increased research efforts in recent years, attempts to define SSB function and typology have remained inconclusive, and broader cultural and cognitive aspects related to their production techniques, use and dispersal have yet to be explored in depth. What is the significance of their continuous presence and wide geographical distribution? What do these imply regarding the cognitive abilities of Oldowan and Acheulian humans? In this paper, we turn the spotlight on these enigmatic items. We address unresolved issues and explore the ergonomic and perceptual properties stimulated by the geometry of these items. We show that stone ball variability matches (modern) human hand palm variability. Moreover, when using SSBs in percussion activities, they are handled with the entire palm. Following, we discuss the role of SSBs in the context of socio-cultural processes. We suggest that SSBs reflect some of the earliest evidence in human history of a specific form that was conceptualised and recurrently acted upon. [ABSTRACT FROM AUTHOR]

Bahra 1 is a large site in the north of the Arabian Peninsula that provided an assemblage of nearly 100,000 lithic artefacts. The whole lithic industry of Bahra 1 represents a set of well‐thought‐out flint, quartz and stone tools for the mass production of shell jewellery, with only a small share of typical household tools. They mostly relate to the Ubaid tradition with Arabian Neolithic influences. However, limited excavations of the oldest occupational layers of the site also revealed an Epipalaeolithic Zarzian tradition. This paper presents a techno‐typological, functional and cultural characteristic of the whole Bahra 1 chipped and ground stone industry identified during the excavations at the site in 2009–2019. [ABSTRACT FROM AUTHOR]

Technological analysis of the late Holocene component of the stone artefact assemblage recovered from the Kings Table rockshelter in the Blue Mountains, west of Sydney, provides the basis for an assessment of the site's role in broader late Holocene settlement-subsistence systems. Drawing on Kuhn's widely employed "provisioning model", as well as Kelleher's general pre-contact occupation model for the Blue Mountains National Park (BMNP), we argue that the Kings Table rockshelter functioned as a short-term field camp for logistically-organised hunter-gatherers whose principal residential bases were located in "off-mountains" contexts. It is argued that the late Holocene component of the Kings Table assemblage has a technological "signature" entirely consistent with individual provisioning. Aboriginal groups occupying this site over the course of the late Holocene employed a mobile toolkit whose lithic component was dominated by artefacts manufactured out of high-quality, transported silicified tuff and incorporated both backed artefact-bearing composite tools and hafted edge-ground hatchets (axes) as key elements. [ABSTRACT FROM AUTHOR]

Assos (Behram) is built on the ancient volcanic hill 234 meters high, located on the southern coast of Troas, just opposite the island of Lesbos. The archaeological background of Assos dates back to the Chalcolithic at the earliest and is mostly associated with ancient Greek, Roman and Byzantine periods. For this reason, the Paleolithic researches in the region to create the prehistoric chronology of Assos is of great importance. In the researches carried out around the ancient city in 2021, 12 Paleolithic findspots were identified. The findspots are directly related to raw material sources such as basalt, flint are very rich on the land. Lithic assemblages consist of large cutting tools, pebble core technology, prepared and unprepared core technology, retouched and unretouched flakes technology groups. Large cutting tools associated with core tool technology such as bifacial handaxes, massive scrapers, chopper, and chopping tools are important among artifacts. Prepared core technology are associated with the Levallois technique was highly used. The proportion of retouched tools was high and was mostly associated with denticulate and notched tools. The assemblages reflect the characteristics of the Lower and Middle Paleolithic periods in terms of their technological features. The high precentages of tool groups point the function of living areas rather than workshops. The result of the initial research conducted in Assos, which has a special geographical location between Asia and Europe, led to the arrival of important remains that proved hominin activity in the early stages of the Paleolithic period.

Chaco Canyon in New Mexico was the center of an extensive regional cultural system. The strength of Chaco's regional interactions has been partly defined by the presence of non–local goods including obsidian. We take a diachronic look at Chaco obsidian use from AD 500–1250 using the largest sample of XRF sourced obsidian available to date and combine this with technological analyses to identify significant changes in where and how Chacoans obtained and used obsidian. In the AD 700s obsidian from the more distant Jemez Mountains began to supplant the closer Mt. Taylor obsidian. The obsidian is of roughly equal quality, suggesting this shift relates to social factors and not raw material constraints. We find more variation over time in obsidian source use and acquisition strategies than previously noted. The patterning appears to relate to regional and local cultural diversity, social and organizational heterogeneity, and the development of new exchange networks. [ABSTRACT FROM AUTHOR]

The ability of early hominins to overcome the constraints imposed by the characteristics of raw materials used for stone tool production is a key topic on the discussion about the evolution of hominin cognitive capabilities and technical behaviours. Thus, technological variability has been the centrepiece on this debate. However, the variability of lithic assemblages cannot be correctly interpreted without understanding site occupational models and function and considering that individual tools represent specific discard moments in a continuous reduction process. In Europe, the earliest technological record is represented by the scarce and scattered Mode 1 technologies, often deriving from occasional occupations or restricted activity areas yielding unrepresentative assemblages. In this paper, we approach the technological behaviours exhibited by Lower Palaeolithic hominins from the subunit TD6.2 of the Gran Dolina site (Atapuerca, Burgos) by including the perspective of reduction intensity studies on the analysis of technological variability. Gran Dolina TD6.2 is a unique and extremely significant archaeological context, as it represents the oldest multi-layered unit of domestic hominin occupations in the Early Pleistocene of Europe. We use the Volumetric Reconstruction Method (VRM) to estimate the original volume of the blanks and quantify the reduction intensity of each core individually to characterise the reduction distribution patterns using Weibull probability distribution functions. Our results suggest differential raw material management in terms of reduction intensity, according to the characteristics of each lithology. This could reflect a solid understanding of raw material qualities and a certain degree of planning. Altogether, the continuity between knapping strategies through reduction denotes constant adaptation to raw material constraints as well as particular knapping conditions, rather than specific compartmentalised mental schemes. In conclusion, Homo antecessor toolmakers would have been situational knappers whose technological behaviour would be highly adaptive. This research constitutes the first reduction approach for the European Early Pleistocene assemblages that will lead to a referential framework for other European Early Pleistocene sites. [ABSTRACT FROM AUTHOR]

This article on lithic technology addresses the technological changes that occurred during the occupations of the last hunter-gatherer-domesticator populations and early farmer and shepherd societies in the Puna of Jujuy. It has as a particular objective to reconstruct operational chains and technical systems from three sites in the Barrancas basin around 3750–1550 cal BP. Results include various quantitative analyses. These are divided into four parts: raw materials, knapping and shaping methods, and grasping techno-functional units. We present frequencies and percentages for each of these. In the case of not rejecting the null hypothesis and of sufficient richness (>4), we exposed the Shannon-Weaver, dominance, and evenness indices. Even if we observe continuities, the results show that the technological changes are significant and include breaks. Evidence indicates new operative chains, lithic raw material economy, and restructuring of technical systems. We highlight that Middle Holocene hunting technical systems are hafting systems, including processing tools, whereas Late Holocene technical systems are fully grasping systems, with hafting exclusively reserved to arrowheads. These changes are interpreted within the framework of a social, economic, and ecological restructuring. Interactions between farming and herding economies, full sedentary settlements, and llama caravans for long-distance traffic are the proposed phenomena that could explain these changes. [ABSTRACT FROM AUTHOR]