Search

Analyzes the equation used to derive the flow velocity from antidune wavelength for open-channel conditions in cloridorme formations in Gaspe Peninsula, Quebec. Calculations based on the modified equation; Indications of a much higher flow velocity.

In Dutch sub-tidal waters, mud settling from suspension can produce a layer with a thickness of only some millimetres in one slack-water period. However, consolidated mud layers of 10–25 mm thickness in sub-tidal deposits are often observed. This indicates that mud may be preserved over several slack-water periods. This is only possible if the critical shear velocity (U∗c) for the initiation of sediment movement is not surpassed after slack water. Tube and flume experiments reveal: (1) Thicker mud layers have smaller initial consolidation rates and lower values of U∗c. (2) A higher sand content of the mud always gives a more rapid initial consolidation. The U∗c-values increase to a maximum which is reached at a sand content of 40%. Higher sand contents lead to decreasing values of U∗c. (3) For one particular mud sample the U∗c-values increase linearly with the mud concentration Of the bed material. (4) After three hours of consolidation a mud layer may carry a sharply bounded sand layer 0.5 cm thick. By application of the results of the experiments to natural conditions in tidal water some tentative explanations are possible of the formation of flaser, lenticular and sand-clay alternating bedding. [ABSTRACT FROM AUTHOR]

Relative mineral frequencies (number or weight) are not suitable to study variations in the absolute frequencies of individual heavy-mineral species in a turbidite. A particular grain size can be selected as the "nominal grain" and numbers of grains of a particular mineral in all size classes can be converted to nominal grains. The total number of nominal grains per gram of sediment sample has been defined as the "nominal grain abundance", which is a function of the volume (or weight) of the total mineral in the sample. Study of a simple, graded, Tertiary turbidite indicates that the least vertical change in heavy-mineral content occurs at, or slightly above, the middle part of the bed. Heavy minerals in the distal part of the turbidite have more uniform vertical distribution than in the proximal part. [ABSTRACT FROM AUTHOR]

Microscopical and chemical examination of intertidal flats of the Wash indicate that phases of iron corresponding to ferric hydroxide and iron monosulphide are involved in the early diagenetic formation of pyrite, the first being an important source of the iron. Sedimentological data are tested against analyses of total iron extractable by hydrochloric acid and concentrated nitric acid, and of the pyritic fraction of this iron; ignition data for residual organic matter are considered. The occurrence of the pyrite as isolated grains and spherules of framboidal texture is recorded, their size ranges given, and iron monosulphide recognised as the precursor of both forms. Ordering in the pyrite framboidal spherules is recorded and internal coalescence confirmed as a feature of primary growth which obscures the ordering. [ABSTRACT FROM AUTHOR]

A simple method to estimate the degree of ‘crystallinity’ of illite has been used for several years in three French laboratories. Many results, which are unpublished, were obtained; three examples are presented in this paper. They show the sensibility of the method, which allows one to appreciate, above all other methods, burial diagenesis, the front of metamorphism, or some regional areas of very weak metamorphism. [ABSTRACT FROM AUTHOR]

The observed size in the thin-section is less than the true train sizes of the clastic rock as the thin-section plane does not necessarily pass through the centre of gravity of the grains. Correction factors based on probability theory give corrected arithmetic moments of the size distribution in the elastic rock from the observed arithmetic moments of the size distribution in the thin-section. The corrected arithmetic moments so obtained are transformed to their equivalent corrected phi moments which are useful to generate the unknown size distribution of the clastic rock by the help of Edgeworth's series. [ABSTRACT FROM AUTHOR]

Indices based on Wentworth phi values of Q1, Md and Q3 are used for textural classification of sediments. Wentworth phi values enable a detailed subdivision. A nomenclature based on the Wentworth phi indices is developed. The indices, and to a smaller degree the names, show sorting and skewness based on integer phi units. The classification scheme gives a continuous scale from gravel to fine clay. The Q1MdQ3-indices can be used for distinction of river, marine and loess deposits. The addition of indices of the 1st and 99th percentile, giving 5-digit indices, augments the Possibilities for a determination of the environment: river deposits can be distinguished from beach and dune sediments and in more detail from shallow marine and coastal deposits. The indices can be handled by data-processing machines. [ABSTRACT FROM AUTHOR]

The crystallinity and mineralogy of both the glauconite and the clay fraction of samples from six contemporary marine environments were investigated by X-ray diffraction. In those areas where glauconite is now forming, the mineralogy and the degree of crystallinity of both the glauconite pellets and the associated clay fraction are similar. In contrast, detrital and relic glauconites are observed to have mineralogies that are different from their clay fractions. No consistent relationship was observed between degree of crystallinity and color of the pellets. Further, only two classes of glauconite as defined by BuRsT (1958) were common: expandable, interlayered clays and two or more clay minerals in a mixed assemblage. Based on the clay fraction-glauconite similarities and other supporting evidence, glauconite on the Scotia Ridge is concluded to be authigenic. Glauconite from Santa Monica Bay, California and from the continental shelf off Morocco appear to be detrital. Glauconite pellets in the shelf sediments off Guinea and the southeastern Atlantic Shelf of the United States are both detrital and authigenic. The poor crystallinity exhibited by the Chatham Rise glauconite is in contrast to the well-crystallized associated clay fraction and indicates that they are not genetically related. However, the origin of this glauconite remains in doubt. [ABSTRACT FROM AUTHOR]

The article reports that there has been increasing interest in the use of intra-individual test discrepancies as a measure of functioning efficiency. One of the major problems in estabhshing scatter patterns has been that of finding a suitable internal reference point. The three reference points most commonly employed are the mean or IQ, the vocabulary score, and the altitude or maximum score. Psychologists who believe that the G factor is an ability argue for the use of the IQ as a reference point while those who believe that it is a capacity use altitude as a reference point. In regarding intelligence as a capacity or potentiality rather than an ability, vocabulary and altitude proponents consider that test scores falling significantly below the potentiality indicate mental inefficiency or personality disorganization.