Search

In 3D building models, a large number of texture maps with different sizes increase the number of model data loading and drawing batches, which greatly reduces the drawing efficiency of the model. Therefore, this paper proposes a texture set mapping method based on vertex importance. Firstly, based on the 2D space boxing algorithm, the texture maps are merged and a series of Mipmap texture maps are generated, and then the vertex curvature, texture variability and location information of each vertex are calculated, normalized, and weighted to get the importance of each vertex, and then finally, different Mipmap-level textures are remapped according to the importance of the vertices. The experiment proves that the algorithm in this paper can reduce the amount of texture data on the one hand, and avoid the rendering pressure brought by the still large amount of data after merging on the other hand, so as to improve the rendering efficiency of the model. [ABSTRACT FROM AUTHOR]

Peatland restoration and rehabilitation action has become more widely acknowledged as a necessary response to mitigating climate change risks and improving global carbon storage. Peatland ecosystems require restoration time spans of the order of decades and, thus, cannot be dependent upon the shorter-term monitoring often carried out in research projects. Hydrological assessments using geospatial tools provide the basis for planning restoration works as well as analysing associated environmental influences. "Restoration" encompasses applications to pre-restoration and post-restoration scenarios for both bogs and fens, across a range of environmental impact fields. The aim of this scoping review is to identify, describe, and categorize current process-based modelling uses in peatlands in order to investigate the applicability and appropriateness of ecohydrological and/or hydrological models for northern peatland restoration. Two literature searches were conducted using the entire Web of Science database in September 2022 and August 2023. Of the final 211 papers included in the review, models and their applications were categorized according to this review's research interests in seven distinct categories aggregating the papers' research themes and model outputs. Restoration site context was added by identifying 229 unique study site locations from the full database, which were catalogued and analysed against raster data for the Köppen–Geiger climate classification scheme. A majority of northern peatland sites were in temperate oceanic zones or humid continental zones that experienced snow. Over one in five models from the full database of papers were unnamed and likely intended for single use. Key themes emerging from topics covered by papers in the database included the following: modelling restoration development from a bog growth perspective, the prioritization of modelling greenhouse gas (GHG) emissions dynamics as a part of policymaking, the importance of spatial connectivity within or alongside process-based models to represent heterogeneous systems, and the increased prevalence of remote sensing and machine learning techniques to predict restoration progress with little physical site intervention. Models are presented according to their application to peatlands or broader ecosystem and organized from most to least complex. This review provides valuable context for the application of ecohydrological models in determining strategies for peatland restoration and evaluating post-intervention development over time. [ABSTRACT FROM AUTHOR]

Structural connectivity is an important factor in preserving coral diversity. It maintains the stability and adaptability of coral reef ecosystems by facilitating ecological flow, species migration, and gene exchange between coral communities. However, there has always been a lack of consistent solutions for accurate structural connectivity describing and quantifying, which has hindered the understanding of the complex ecological processes in coral reefs. Based on this, this paper proposes a framework that uses advanced remote sensing and deep learning technologies to assess coral structural connectivity. Specifically, accurate coral patches are firstly identified through image segmentation techniques. And the structural connectivity is quantified by assessing the connectivity patterns between and within these coral patches. Furthermore, Tetiaroa Island in the South Pacific is used as a case study to validate the effectiveness and accuracy of the framework in assessing coral structural connectivity. The experimental results demonstrate that the framework proposed in this paper provides a powerful tool for understanding the internal ecological processes and external spatial patterns of coral reef ecosystems, thereby promoting scientific understanding and effective management of coral reef conservation. [ABSTRACT FROM AUTHOR]

The preface to the Proceedings of the 8th Smart Data Smart Cities (SDSC) conference provides an overview of the concept of a Smart City, which involves the use of digital layers for city governance, citizen services, and sustainable development. Smart Cities utilize intelligent technology to enhance urban life by integrating data from various sources such as sensors, demographics, mapping, and building information models. The conference focuses on the use of spatial information and communication technologies in Smart Cities, covering topics such as 3D modeling, citizen engagement, transportation, urban decision-making, and smart urban mobility. The volume consists of 31 research papers selected through blind review, addressing different aspects of Smart Cities. [Extracted from the article]

Due to the increase in the frequency and intensity of natural disasters such as heavy rainfall events, the evaluation of the vulnerability of the built environment is becoming increasingly important. Evaluation techniques for each separate building often require detailed geometric models of the supporting structures and time-consuming simulations. One possibility to overcome this problem is to categorize the buildings in a first step and use representative building models for each category. This paper presents a semi-automated approach for categorizing buildings and creating parametric models for the respective building categories. Using these models, the buildings of a category can be collectively examined for their vulnerability to various impacts. First, this paper introduces open geodata that can be used for this process. For the categorization of the buildings, the collected data is further processed to extract additional information such as building age classes or floor plan geometries of the buildings. This results in a data set, with the help of which the buildings can be categorized. However, information about the load-bearing structure is often missing in the different data sources. By including information on typical construction methods that are associated with the previously determined characteristics (age, floor plan geometry, usage), representative models can be created for individual building categories. In this study, the approach was tested in a selected reference area in Berlin. The results indicate that the presented approach is a promising first step towards deriving geometrical models from open geodata that can be used to evaluate the vulnerability of buildings. [ABSTRACT FROM AUTHOR]

The technology for 3D reconstruction of tree models based on point clouds has been extensively researched, necessitating effective datasets for the study of branch and leaf separation, skeleton point extraction, and tree parameter extraction methods. However, existing datasets for 3D tree models face several challenges, including insufficient data volume for deep learning network training, low accuracy of model ground truth impeding effective method precision evaluation, and a lack of dataset richness to satisfy the needs of multi-type method assessments. In response to these challenges, This paper introduces, for the first time, a fully automated method for generating structured three-dimensional synthetic tree models, and constructs a large-scale 3D synthetic tree dataset enriched with comprehensive structural information. This method facilitates automated computation across several processes, including the mass generation of simulated trees, separation of branches and leaves, noise generation, extraction of skeleton points, and volume calculation. To validate the usability of this dataset across various applications, this paper employs state-of-the-art (SoTA) algorithms to verify the accuracy of methods in 3D tree model reconstruction and carbon stock calculation, thereby thoroughly demonstrating the dataset's effectiveness. [ABSTRACT FROM AUTHOR]

This paper discusses the representation of the scale dimension using tGAP/SSC-DHE, emphasizing its role in creating vario-scale representations. It outlines the process of integrating the scale dimension as the third dimension in a 2D map before transitioning to 3D or 4D maps. DHE is introduced as an effective data structure for this approach, maintaining crucial connections across different levels of detail and offering enhanced topology. Its strength lies in the ability to modify specific parts of the model while retaining a clear structure, thanks to well-defined operators such as Euler operators. This method provides a versatile framework for representing complex spatial data, allowing for detailed analysis while preserving overall coherence and it updates the shape and structure of the model at the same time through local modifications. Through practical implementation, it demonstrates the potential for improved visualization and understanding of multi-dimensional spatial relationships. Also, the DHE data structure supports slicing by either a horizontal plane to produce a map at a specific scale (depending on the height of the horizontal plane) and tilted planes to produce perspective views with mixed scales. [ABSTRACT FROM AUTHOR]

The potential of Building Information Models (BIM) to establish rights and responsibilities for multi-level building complexes in cadastral registrations has been explored in many previous researches. However, the implementation of BIM-based cadastral registrations in practice remains limited due to the complex interplay between technical potentials and legal implications as well as uncertainty about the additional complexity of a BIM model and the extra work that will be required to generate the BIM Legal model. In collaboration with Netherlands Kadaster, we have investigated the data requirements for a BIM Legal model that will support the 3D cadastral registration of apartment complexes and that aligns with BIM creation processes in practice. The BIM Legal model aims to visualise the spatial aspects of apartment complexes and to align the cadastral registration to the 3D data that is generated in the design and construction phase of new buildings. The BIM Legal file will be submitted when an apartment complex is being registered and is based on IFC, the open standard established by BuildingSMART International and used in the BIM domain. To make the implementation of BIM Legal feasible legally, technically, and economically, we apply a 3-phase approach. This paper presents the BIM Legal model as defined in Phase 1, which enables to generate a BIM Legal model compliant with current legislation frameworks with no/minimal manual interaction from BIM models as commonly generated in design processes. The paper describes the 3-phase approach, the context of Phase 1, the data requirement analyses, the defined BIM Legal data model, as well the questions that emerged during the specification process that need to be answered to further improve the implementation of Phase 1 and to further develop BIM Legal for Phases 2 and 3. [ABSTRACT FROM AUTHOR]

The preparation of laser scanning missions is important for efficiency and data quality. Furthermore, it is a prerequisite for automated data acquisition, which has numerous applications in the built environment, including autonomous inspections and monitoring of construction progress and quality criteria. The scene and potential scanning locations can be discretized to facilitate the analysis of visibility and quality aspects. The remaining mathematical problem to generate an economic scan strategy is the Viewpoint Planning Problem (VPP), which asks for a minimum number of scanning locations within the given scene to cover the scene under pre-defined requirements. Solutions for this problem are most commonly found using heuristics. While these efficient methods scale well, they cannot generally return globally optimal solutions. This paper investigates the VPP based on a problem description that considers quality-constrained visibility in 3D scenes and suitable overlaps between individual viewpoints for targetless registration of acquired point clouds. The methodology includes the introduction of a preprocessing method designed to simplify the input data without losing information about the problem. The paper details various solution methods for the VPP, encompassing conventional heuristics and a mixed-integer linear programming formulation, which is solved using Benders decomposition. Experiments are carried out on two case study datasets, varying in specifications and sizes, to evaluate these methods. The results show the actual quality of the obtained solutions and their deviation from optimality (in terms of the estimated optimality gap) for instances where exact solutions can not be achieved. [ABSTRACT FROM AUTHOR]

The ISPRS Technical Commission I Midterm Symposium on "Intelligent Sensing and Remote Sensing Application" was held in Changsha, China, during May 13–17, 2024, aiming to provide a platform to share the latest researches, advanced technologies and application experience, to discuss the future development and to seek international cooperation in various forms. The Symposium has received 229 full paper and abstract s, among them 45 double-blind peer-reviewed full papers were published in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information, and 165 papers accepted through abstract review were published in the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. These papers are mostly dedicated to topics of the 8 TC I Working Groups, 3 Inter-commission Working Groups, including Satellite Missions and Constellations for Remote Sensing, Mobile Mapping Technology, Multispectral, Hyperspectral and Thermal Sensors, LiDAR, Laser Altimetry and Sensor Integration, Microwave and InSAR Technology for Earth Observation, Orientation, Calibration and Validation of Sensors, Data Quality and Benchmark of Sensors, Multi-sensor Modelling and Cross-modality Fusion, Robotics for Mapping and Machine Intelligence, Autonomous Sensing Systems and their Applications, Digital Construction: Reality Capture, Automated Inspection and Integration to BIM, Point Cloud Generation and Processing, Artificial Intelligence Technology Related to Sensor Systems, Multi-sensor Remote Sensing Applications.. These papers presented the latest trends of sensor systems. The full papers and abstracts were reviewed by the members of the Symposium Scientific Committee comprised of Working Group officers and invited experts. We would like to take this opportunity to express our great gratitude to the Scientific Committee, Local Organizing Committee, Sponsors, Exhibitors and all those who have contributed to this successful Symposium. We also want to express our thanks to the authors for their excellent papers and presentations. Tang Xinming, Antonio Maria Garcia Tommaselli, Zhang Tao, Xie JunfengISPRS Technical Commission I on Sensor SystemsMay 2024, Changsha, China [ABSTRACT FROM AUTHOR]

With the increase of remote sensing image acquisition methods and the number of remote sensing image data, the traditional manual annotation and recognition methods can no longer meet the needs of the present production life. This study explores the use of deep learning techniques to improve the efficiency and accuracy of target detection in remote sensing satellite images, especially for small targets. Traditional target detection methods often face challenges in recognition accuracy and processing speed due to the specificity and complexity of satellite images, such as large size, variable lighting conditions and complex background. Therefore, this paper adopts the YOLOv5 model and introduces the CBAM (Convolutional Block Attention Module) attention mechanism, which significantly improves the detection of small and dense targets. Experimental validation, using the improved YOLOv5 model on the VisDrone2021 dataset, demonstrates that the model improves the mean average percision (mAP) by 1.9% while maintaining realtime performance. This paper provides new ideas for remote sensing image processing, especially for applications in the fields of urban planning and automatic driving, etc. Despite the progress made in this study, the detection of small targets in remote sensing images, the limited classification accuracy and the detection of dynamic targets still need further research. [ABSTRACT FROM AUTHOR]

As urbanization accelerates, traffic congestion and frequent accidents have become prominent issues, prompting the development of intelligent transportation systems. This paper focuses on the research of vehicle and pedestrian detection algorithms to improve detection accuracy in complex traffic environments. Considering the limitations of traditional object detection algorithms in complex situations, this study adopts the deep learning-based YOLOv8 algorithm and introduces the Coordinate Attention (CA) module to enhance the model's feature extraction and localization capabilities. Experimental results show that the improved YOLOv8 network achieves a 1.1% increase in detection accuracy while maintaining its original speed. Furthermore, this paper constructs a vehicle and pedestrian dataset suitable for Chinese traffic scenes, providing an effective solution for autonomous driving assistance systems. Overall, this study holds significant reference value for vehicle and pedestrian detection in the field of intelligent transportation. [ABSTRACT FROM AUTHOR]

This paper investigates the challenges of implementing the CityGML standard within database environments for managing urban digital twins (UDT), with a particular focus on addressing big geodata issues. CityGML stands as a critical standard for representing and exchanging 3D urban models and thematic data, essential for effective urban planning and infrastructure management. However, integrating CityGML into databases poses challenges due to the dual requirements of geospatial and semi-structured data. While the former imposes a certain rigor in its formalism, the second benefits from more flexibility. Through a comprehensive review and benchmarking of existing database implementations, including both new distributions and those often use, 3DCityDB, CJDB, Measur3D, and Cerbere, this paper proposes a novel approach towards a multi-database CityGML environment tailored to the specific needs of UDT. The proposed solution leverages the strengths of both relational and NoSQL databases, offering a flexible and scalable architecture while ensuring data consistency, geospatial capabilities and compliance with the CityGML schema. The research hypothesis suggests integrating Cerbere, a middleware for CityGML schema compliance and transaction validation, with 3DCityDB and Measur3D (MongoDB). This approach aims to demonstrate the feasibility of managing advanced 3D data operations based on the CityGML model (3DCityDB) and scalability for big data like IoT (Measur3D) within a multi-database environment. The paper contributes to the advancement of UDT by providing a comprehensive solution for managing diverse data types, facilitating more effective urban planning, infrastructure management, and sustainable development initiatives in the context of smart cities. [ABSTRACT FROM AUTHOR]

One of the major challenges that existing spatial data is facing is the fragmentation of its representation of indoor and outdoor space. As studies in the use of omnidirectional images in representing space and providing Location-based Services (LBS) has been increasing, the representation of the different scales of space, both in indoors and outdoors, has yet to be addressed. This study aims to develop a data model for generating a multi-scale image-based representation of space using omnidirectional images based spatial relationships. This paper identifies the different scales of space that are represented in spatial data and extends previous approaches of using omnidirectional images in providing indoor LBS towards representing the other scales of space, particularly in outdoor space. Using a sample data, we present an experimental implementation to demonstrate the potential of the proposed data model. Results show that apart from the realistic visualization that image data provides, basic spatial functions can be performed on the image data constructed based on the proposed data model. [ABSTRACT FROM AUTHOR]

Figure-ground maps play a key role in many disciplines where urban planning or analysis is involved. In this context, the automatic generation of such maps with respect to certain requirements and constraints is an important task. This paper presents a first step towards a deep automatic generation of figure-ground maps where the built density of the generated scenes is controlled and taken into account. This is preformed building upon a Geographic Data Translation model which has been applied to generate less available geospatial features, e.g. building footprints, from more widely available geospatial data, e.g. street network data, using conditional Generative Adversarial Networks. A novel processing approach is introduced to incorporate the population density and the built density accordingly. Furthermore, the impact of both the level of detail of the street network, i.e. its sparsity or density, and the spatial resolution of the training data on the generated figure-ground maps has been investigated. The generated maps and the qualitative results reveal an obvious impact of these parameters on the layout of built and unbuilt areas. Our approach paves the way for the expansion of existing districts by figure-ground maps of future neighbourhoods considering factors such as density and further parameters which will be subject of future work. [ABSTRACT FROM AUTHOR]

Numerous existing buildings in Germany lack corresponding BIM models. Advanced analysis and visualization purposes, including indoor navigation, energy demand simulations, and building materials recycling on these buildings presents significant challenges, as only Level of Detail 2 (LoD2) models provided by local housing authorities, along with architectural drawings and textual descriptions of the internal structures, are available. This paper proposes a semi-manual workflow, LoD2BIM, to facilitate the efficient reconstruction and conversion of existing building models, particularly transforming Germany's official 3D Building Models in LoD2 into comprehensive, information-rich IFC models using open-source software. Through the integration of BaseX and CesiumJS, the visualization, querying and extracting of one LoD2 model from CityGML file become easy and feasible. Central to the LoD2BIM workflow is Blender, it acts as the primary platform for model editing, reconstruction and conversion. Users can expediently rebuild and refine LoD2 models utilizing Blender's visual interface and the tool floorplan to blender3d, based on floorplans or detailed written descriptions. New Blender add-ons are developed to streamline the model import and conversion process. The BlenderBIM add-on is also modified to facilitate the automatic batch assignment of mesh as IFC classes. This workflow not only showcases the reconstruction and subsequent conversion of CityGML models into IFC models but also illustrates the potential to act as an alternative to commercial software in Building Information Modeling (BIM) editing. [ABSTRACT FROM AUTHOR]

Effective visualization of spatial data, especially in the realm of 3D cadastral visualization, relies on the utilization of optimal interaction techniques and user interfaces for navigating complex datasets and understanding property delineations. This paper synthesizes findings from diverse studies investigating the efficacy of interaction modalities and user interfaces in 3D visualization across various domains. Drawing parallels to the broader field of 3D visualization, particularly in interaction tasks and user interface paradigms, this paper examines the potential for advancing 3D cadastral visualization systems. The study identifies fundamental interaction tasks crucial for effective 3D cadastral visualization, including object manipulation, widget manipulation, and data selection and annotation. It evaluates a range of user interfaces, from traditional input methods to emerging technologies such as gesture-based interfaces and virtual reality (VR) headsets, highlighting their respective strengths and limitations.Embracing insights from comparative analyses of immersive and non-immersive scenarios, this paper reveals significant insights into the effectiveness of immersive environments, such as virtual reality and augmented reality, in enhancing user experience and task performance for 3D cadastral visualization. Additionally, it aims to address key challenges associated with visualizing 3D cadastral data in immersive environments by proposing a comprehensive framework for evaluating the effectiveness and utility of immersive visualization for 3D cadastral purposes. [ABSTRACT FROM AUTHOR]

This paper presents a new algorithm for filling holes in Level of Detail 2 (LoD2) building mesh models, addressing the challenges posed by geometric inaccuracies and topological errors. Unlike traditional methods that often alter the original geometric structure or impose stringent input requirements, our approach preserves the integrity of the original model while effectively managing a range of topological errors. The algorithm operates in three distinct phases: (1) pre-processing, which addresses topological errors and identifies pseudo-holes; (2) detecting and extracting complete border rings of holes; and (3) remeshing, aimed at reconstructing the complete geometric surface. Our method demonstrates superior performance compared to related work in filling holes in building mesh models, achieving both uniform local geometry around the holes and structural completeness. Comparative experiments with established methods demonstrate our algorithm's effectiveness in delivering more complete and geometrically consistent hole-filling results, albeit with a slight trade-off in efficiency. The paper also identifies challenges in handling certain complex scenarios and outlines future directions for research, including the pursuit of a comprehensive repair goal for LoD2 models to achieve watertight 2-manifold models with correctly oriented normals. Our source code is available at https://github.com/tudelft3d/Automatic-Repair-of-LoD2-Building-Models.git. [ABSTRACT FROM AUTHOR]

Autonomous vehicles must navigate independently in an outdoor environment using features or objects. However, some objects may be more or less suitable for localization due to their attributes. Therefore, this work investigates the suitability of landmarks for camera- and object-based outdoor localization methods. First, object attributes are methodically derived from the requirements of object-based localization. The physical representation on the camera image plane, probability of occurrence, and persistence were identified as influencing the object localization suitability. The influence of the object's camera image plane representation regarding object recognition algorithms is not considered or discussed, but advice on the minimum object pixel size is provided. The first milestone was the creation of an equation for object localization suitability calculation by normalizing and multiplying the identified attributes. Simultaneously, potential objects from the outdoor environment were identified, resulting in a structured object catalog. The results of the equation and catalog are a ranked according to the object localization suitability in a comparison table. Our comparison demonstrates that objects such as buildings or trees are more suitable than street lane markings for self-localization. However, most current datasets do not include the proposed instantiated objects. The paper addresses this issue, assists in the object selection for outdoor localization methods and provides input for the creation of future-oriented datasets and autonomous driving maps. [ABSTRACT FROM AUTHOR]

This paper introduces Property Valuation Application Domain Extension (ADE) within CityGML 3.0, aiming to integrate relevant indoor and outdoor 3D variables (cost estimation, view quality, etc.) for accurate property valuation. Current models lack the necessary features for this specific application. Leveraging IFC data for indoor elements, this ADE extends CityGML, addressing the existing gap. This paper identifies and categorizes data requirements, leading to the conceptualization and development of the model. By enriching CityGML 3.0 with IFC data, the approach introduces new features like the "Property Unit" to ensure adaptability across diverse valuation scenarios. Despite encountering data integrability challenges, we here commit to refining the model and overcoming these obstacles. A preliminary implementation using CityJSON demonstrates successful integration and paves the way for future implementation. These include developing an API platform and establishing an official repository to facilitate practical usability and scalability. This research significantly contributes to advancing property valuation processes by providing accurate valuations for stakeholders and promoting the use of 3D urban data in domain-specific extensions. [ABSTRACT FROM AUTHOR]

Rapid mapping demands efficient methods for a fast extraction of information from satellite data while minimizing data requirements. This paper explores the potential of deep learning for the generation of high-resolution urban elevation data from Synthetic Aperture Radar (SAR) imagery. In order to mitigate occlusion effects caused by the side-looking nature of SAR remote sensing, two SAR images from opposing aspects are leveraged and processed in an end-to-end deep neural network. The presented approach is the first of its kind to implicitly handle the transition from the SAR-specific slant range geometry to a ground-based mapping geometry within the model architecture. Comparative experiments demonstrate the superiority of the dual-aspect fusion over single-image methods in terms of reconstruction quality and geolocation accuracy. Notably, the model exhibits robust performance across diverse acquisition modes and geometries, showcasing its generalizability and suitability for height mapping applications. The study's findings underscore the potential of deep learning-driven SAR techniques in generating high-quality urban surface models efficiently and economically. [ABSTRACT FROM AUTHOR]

Monitoring the deformation of long-span bridges is essential for assessing structural health and safety. The existing single-camera deformation measurement method is unable to meet the high-precision measurement requirement for the deformation of large-span bridges. This paper proposes a real-time deformation measurement method for the long-span bridge using multi-inertial camera system. The method is based on visual measurement which the target deformation is measured by multiple cameras. Meanwhile, inertial measurement is used to estimate the relative pose of the camera to compensate for camera motion errors. It is applied to the health monitoring system of a long-span bridge. The experimental results show that the method proposed in this paper is highly consistent with the hydrostatic leveling measurement, with a RMSE of 4.83mm. The method can accurately and real-time measure the deformation of large-span bridges with a promising engineering value. [ABSTRACT FROM AUTHOR]

The total amount of sugarcane planting in China ranks third in the world, and Guangxi is the largest sugarcane planting base in China. In order to help the Guangxi government and industry better understand the annual planting distribution and scale of sugarcane in the whole region, it is convenient to optimize the planting structure and improve the efficiency of resource utilization, so as to ensure the stable development of Guangxi sugar industry. Based on the satellite-based hyperspectral image data of ' Zhuhai No.1 ', this paper carries out sugarcane recognition and area extraction, which fills the application gap of satellite-based hyperspectral image data in extracting sugarcane area in China. A globally optimized extended random walk model was used to identify and extract sugarcane by combining the spatial-spectral information of hyperspectral imagery. Firstly, the Initial probability estimation is performed using the LOR classifier, and then use the data after MNF dimensionality reduction to construct a weighted graph, and finally the probability optimization and recognition are carried out based on the extended random walk model. The results show that the spatial-spectral joint method based on extended random walk can effectively identify sugarcane, and the sugarcane recognition accuracy of 2021 year image can reach 91.4%, the misrecognition rate is 2.8%; the sugarcane recognition accuracy of 2020 year image can reach 90.5 %, the misrecognition rate is 3.1%. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) can image the ground with a wide area and high resolution at all times and in all weather and has become an important means of remote sensing. Differential interferometry SAR technology can obtain high-precision surface deformation information by processing more than two SAR images before and after deformation. In recent years, it has attracted widespread attention and research. However, due to the increasing number of ground electronic devices, ground radio frequency interference (RFI) has become one of the main problems in differential interferometry SAR processing, seriously affecting the performance of differential interferometry SAR imaging and differential interferometry surface deformation monitoring applications. In this paper, a clutter cancellation interference enhancement detection algorithm is proposed. By clutter suppression in the primary and secondary images, the interference-to-signal ratio is increased, which effectively improves the interference detection capabilities. The effectiveness of the algorithm in this paper is verified by the on-orbit measured data of the Lutan-1 satellites. [ABSTRACT FROM AUTHOR]

This paper presents a systematic review of published case studies on Heritage Building Information Modelling (HBIM) since 2018, and identifies research gaps in the subject matter. Building upon the foundational work of Ewart and Zuecco (2019), this research aims to reveal the latest trends in HBIM implementation, identify recent developments of HBIM technologies, changes in the purpose of HBIM programs and stakeholder roles and responsibilities, and uncover knowledge gaps that provide avenues for future research. Utilizing the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) approach, two major academic databases, Scopus and Web of Science (WOS), were searched, resulting in a rich and diverse dataset for analysis. The paper reports findings on the status of reality capture techniques used to acquire data for HBIM development, focusing on terrestrial laser scanning (TLS) technology. The review highlights the benefits and limitations of TLS for data acquisition in HBIM, as well as the integration of TLS with other reality capture technologies, such as Structure from Motion (SfM) and photogrammetry. The paper further outlines the typical workflow for processing TLS scan data and explores the integration of multiple point clouds for comprehensive heritage site modeling. In addition to the state of the art, this systematic review also uncovers several research gaps in the field of HBIM that offer opportunities for future research and innovation, including the lack of guidelines for data acquisition in HBIM programs, the predominantly manual development process of HBIM from TLS point cloud data, and the under-utilized capacity of TLS for long-term monitoring and change detection. This comprehensive review provides valuable insights into the current landscape of HBIM, offering guidance for future research and development in the heritage sector and highlighting areas in need of further investigation to advance the field. [ABSTRACT FROM AUTHOR]

Complex geometric distortions and nonlinear radiation differences between optical and synthetic aperture radar (SAR) images present challenges for the matching of sufficient and evenly distributed corresponding points. To address this problem, this paper proposes a deep convolutional network based on an attention mechanism for matching optical and SAR images. In order to obtain robust feature points, we employ phase consistency instead of image intensity and gradient information for feature detection. A deep convolutional network (DCN) is designed to extract high-level semantic features between optical and SAR images, providing robustness to geometric distortion and nonlinear radiation changes. Notably, incorporating multiple inverted residual structures in the DCN facilitates efficient extraction of local and global features, promoting feature reuse, and reducing the loss of key features. Furthermore, a dense feature fusion module based on coordinate attention is designed, focusing on the spatial positional information of effective features, integrating key features into deep descriptors to enhance the robustness of deep descriptors to nonlinear radiometric differences. A coarse-to-fine strategy is then employed to enhance accuracy by eliminating mismatches. Experimental results demonstrate that the proposed network performs better than the manually designed descriptors-based methods and the stateof- the-art deep learning networks in both matching effectiveness and accuracy. Specifically, the number of matches achieved is approximately 2 times greater than that of other methods, with a 10% improvement in F-measure. [ABSTRACT FROM AUTHOR]

The carbon budget concept states that the global mean temperature (GMT) increase is roughly linearly dependent on cumulative emissions of CO 2. The proportionality is measured as the transient climate response to cumulative emissions of carbon dioxide (TCRE). In this paper, the deviations of the carbon budget from the strict linear relationship implied by the TCRE are examined through the lens of a temperature response to an emission pulse (i.e., pulse response) and its relationship with a nonlinear TCRE. Hereby, two sources of deviation are distinguished: emission scenario and climate state dependence. The former stems from the scenario choice, i.e., the specific emission pathway for a given level of cumulative emissions and the latter from the change in TCRE with changing climatic conditions. Previous literature argues for scenario independence using a stylized set of emission scenarios, and offers a way to fit a nonlinear carbon budget equation. This paper shows how the pulse response, viewed as a Green's function, gives a unifying perspective on both scenario and state dependence. Moreover, it provides an optimization program that tests the scenario independence under the full range of emission pathways for a given set of constraints. In a setup chosen in this paper, the deviations stemming from emission pathway choices are less than 10 % of the overall temperature increase and gradually diminish. Moreover, using the pulse response as a Green's function, the scenario-dependent effects of a reduced-complexity climate model were replicated to a high degree, confirming that the behavior of scenario-dependent deviations can be explained and predicted by the shape of the pulse response. Additionally, it is shown that the pulse response changes with climatic conditions, through which the carbon budget state dependency is explained. Using a pulse response as an approximation for a state-dependent TCRE, an alternative method to derive a nonlinear carbon budget equation is provided. Finally, it is shown how different calibrations of a model can lead to different degrees of carbon budget nonlinearities. The analysis is done using FaIRv2.0.0, a simple climate emulator model that includes climate feedback modifying the carbon cycle, along with a one-box model used for comparison purposes. The Green's function approach can be used to diagnose both models' carbon budget scenario dependency, paving the way for future investigations and applications with other and more complex models. [ABSTRACT FROM AUTHOR]

Inter-basin water transfer projects are the main measure to address the water deficit crisis caused by uneven distribution of water resources. The current water transfer operation mainly tends to be present in areas with small water transfer costs and is prone to encounter the problem of spatial and temporal imbalances in water allocation. To address these issues, this paper defines a water deficit evenness index (WDEI), aimed at minimizing regional differences in water scarcity and sharing the pressure of water scarcity as a social demand objective. This index is incorporated into a joint optimization model for the Jiangsu section of the South-to-North Water Diversion Project (J-SNWDP), which comprises both the ecological objective of the total water deficit (TWD) and the economic objective of the pumping water (PW). Further, the Nondominated Sorting Genetic Algorithm III (NSGA-III) and multi-attribute decision-making were applied to solve the model and obtain an optimal operation strategy. The results showed the following: (1) the WDEI defined in this paper can mitigate the synchronized water scarcity in certain water users. In typical normal years (wet year and dry year), the WDEI shows a reduction of 94.2 % (81.8 %, 76.7 %) compared to the historical operation strategy. (2) The optimized operation strategy can significantly reduce TWD and PW by 82.06% (37.69 %, 52.36 %) and 45.13 % (3.25 %, 21.51 %) compared with the historical values, respectively, which can improve the water supply satisfaction and reduce the project cost. At the same time, the lake storage capacity of the optimal operation strategy performs well, and the water transfer efficiency of the river is significantly improved. (3) In this paper, targeted optimal operation strategies and potential ways to secure the project tasks are proposed for different natural flow. Overall, it is of great significance to study the water supply equity in the J-SNWDP to alleviate the concentrated water deficit in Jiangsu Province and other similar regions. [ABSTRACT FROM AUTHOR]

The ultraviolet multi-filter rotating shadow-band radiometer (UV-MFRSR) is a seven-channel radiometer with narrowband filters centered between wavelengths 300 and 368 nm. Four of the middle wavelengths in this device are near those used in the Dobson spectrometer to retrieve ozone column abundance. In this paper measurements from Mauna Loa Observatory (MLO) were used first to calibrate the instrument using the Langley plot method and subsequently to derive column ozone and aerosol optical depths. The ozone derived from the UV-MFRSR was compared to the ozone measured by a Dobson spectrophotometer that operates daily at the MLO, resulting in column values within about 1 DU on average for 43 d in 2018. The aerosol optical depth (AOD) retrievals are more challenging. Generally, the AOD increases with wavelength between 305 and 332 nm, not what is expected given the typical AOD wavelength dependence at visible wavelengths. An example of this behavior is discussed, and research by others is cited that indicates similar behavior at these wavelengths, at least for the low-aerosol-optical-depth conditions encountered at high-altitude sites. [ABSTRACT FROM AUTHOR]

This paper introduces an integrated approach utilizing ground data consists of videos captured with a 360° (spherical) camera and aerial data acquired with a UAV equipped with a RTK GNSS module to reconstruct a portion of a small-town city center and/or a cultural heritage site. Previous research has demonstrated that image blocks oriented with RTK data on camera position can reach centimeter accuracies and can be efficiently used to reconstruct large areas and single monuments. However, some areas like porches, narrow passages and streets cannot be properly reconstructed from an aerial point of view. Conversely, ground-based 360° images offer detailed insights into the terrain and features that may be obscured from an aerial perspective. Integration of those two points of view can increase spatial resolution and coverage for 3D reconstruction. Indeed, the UAV captures large-scale features and topography, while ground-based 360° images focus on intricate details and ground-level characteristics. The possibility to exploit GNSS data acquired by UAV may also be used for GNSS-assisted image orientation with the aim of reducing or even avoiding, in specific situations, the need for GCPs. The paper explores practical applications of such data integration in the cultural heritage domain demonstrating the efficacy of the integrated approach in scenarios with complex architectures and inaccessible areas. [ABSTRACT FROM AUTHOR]

Borehole data are essential for conducting precise urban geological surveys and large-scale geological investigations. Traditionally, explicit modelling and implicit modelling have been the primary methods for visualizing borehole data and constructing 3D geological models. However, explicit modelling requires substantial manual labour, while implicit modelling faces problems related to uncertainty analysis. Recently, machine learning approaches have emerged as effective solutions for addressing these issues in 3D geological modelling. Nevertheless, the use of machine learning methods for constructing 3D geological models is often limited by insufficient training data. In this paper, we propose the semi-supervised deep learning using pseudo-labels (SDLP) algorithm to overcome the issue of insufficient training data. Specifically, we construct the pseudo-labels in the training dataset using the triangular irregular network (TIN) method. A 3D geological model is constructed using borehole data obtained from a real building engineering project in Shenyang, Liaoning Province, NE China. Then, we compare the results of the 3D geological model constructed based on SDLP with those constructed by a support vector machine (SVM) method and an implicit Hermite radial basis function (HRBF) modelling method. Compared to the 3D geological models constructed using the HRBF algorithm and the SVM algorithm, the 3D geological model constructed based on the SDLP algorithm better conforms to the sedimentation patterns of the region. The findings demonstrate that our proposed method effectively resolves the issues of insufficient training data when using machine learning methods and the inability to perform uncertainty analysis when using the implicit method. In conclusion, the semi-supervised deep learning method with pseudo-labelling proposed in this paper provides a solution for 3D geological modelling in engineering project areas with borehole data. [ABSTRACT FROM AUTHOR]

In the atmosphere, aerosols can originate from numerous sources, leading to the mixing of different particle types. This paper introduces an approach to the partitioning of aerosol mixtures in terms of backscattering coefficients. The method utilizes data collected from the Mie–Raman–fluorescence lidar, with the primary input information being the aerosol backscattering coefficient (β), particle depolarization ratio (δ), and fluorescence capacity (GF). The fluorescence capacity is defined as the ratio of the fluorescence backscattering coefficient to the particle backscattering coefficient at the laser wavelength. By solving a system of equations that model these three properties (β , δ and GF), it is possible to characterize a three-component aerosol mixture. Specifically, the paper assesses the contributions of smoke, urban, and dust aerosols to the overall backscattering coefficient at 532 nm. It is important to note that aerosol properties (δ and GF) may exhibit variations even within a specified aerosol type. To estimate the associated uncertainty, we employ the Monte Carlo technique, which assumes that GF and δ are random values uniformly distributed within predefined intervals. In each Monte Carlo run, a solution is obtained. Rather than relying on a singular solution, an average is computed across the whole set of solutions, and their dispersion serves as a metric for method uncertainty. This methodology was tested using observations conducted at the ATOLL (ATmospheric Observation at liLLe) observatory, Laboratoire d'Optique Atmosphérique, University of Lille, France. [ABSTRACT FROM AUTHOR]

A 30-year (1980–2010) climatology of the major variables and terms of the transformed Eulerian-mean (TEM) momentum and thermodynamic equations is constructed by using four global atmospheric reanalyses: the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2); the Japanese 55-year Reanalysis (JRA-55); the European Centre for Medium-Range Weather Forecasts (ECMWF) interim reanalysis (ERA-Interim); and the Climate Forecast System Reanalysis (CFSR). Both the reanalysis ensemble mean (REM) and the differences in each reanalysis from the REM are investigated in the latitude–pressure domain for December–January–February and for June–July–August. For the REM investigation, two residual vertical velocities (the original one and one evaluated from residual meridional velocity) and two mass streamfunctions (from meridional and vertical velocities) are compared. Longwave (LW) radiative heating and shortwave (SW) radiative heating are also shown and discussed. For the TEM equations, the residual terms are also calculated and investigated for their potential usefulness, as the residual term for the momentum equation should include the effects of parameterized processes such as gravity waves, while that for the thermodynamic equation should indicate the analysis increment. Inter-reanalysis differences are investigated for the mass streamfunction, LW and SW heating, the two major terms of the TEM momentum equation (the Coriolis term and the Eliassen–Palm flux divergence term), and the two major terms of the TEM thermodynamic equation (the vertical temperature advection term and the total diabatic heating term). The spread among reanalysis TEM momentum balance terms is around 10 % in Northern Hemisphere winter and up to 50 % in Southern Hemisphere winter. The largest uncertainties in the thermodynamic equation (about 50 %) are found in the vertical advection, for which the structure is inconsistent with the differences in heating. The results shown in this paper provide basic information on the degree of agreement among recent reanalyses in the stratosphere and upper troposphere in the TEM framework. [ABSTRACT FROM AUTHOR]

Nitrogen oxides (NOx = NO + NO2) are air pollutants which are co-emitted with CO2 during high-temperature combustion processes. Monitoring NOx emissions is crucial for assessing air quality and for providing proxy estimates of CO2 emissions. Satellite observations, such as those from the TROPOspheric Monitoring Instrument (TROPOMI) on board the Sentinel-5P satellite, provide global coverage at high temporal resolution. However, satellites measure only NO2 , necessitating a conversion to NOx. Previous studies have applied a constant NO2 -to- NOx conversion factor. In this paper, we develop a more realistic model for NO2 -to- NOx conversion and apply it to TROPOMI data of 2020 and 2021. To achieve this, we analysed plume-resolving simulations from the MicroHH large-eddy simulation model with chemistry for the Bełchatów (PL), Jänschwalde (DE), Matimba (ZA) and Medupi (ZA) power plants, as well as a metallurgical plant in Lipetsk (RU). We used the cross-sectional flux method to calculate NO , NO2 and NOx line densities from simulated NO and NO2 columns and derived NO2 -to- NOx conversion factors as a function of the time since emission. Since the method of converting NO2 to NOx presented in this paper assumes steady-state conditions and that the conversion factors can be modelled by a negative exponential function, we validated the conversion factors using the same MicroHH data. Finally, we applied the derived conversion factors to TROPOMI NO2 observations of the same sources. The validation of the NO2 -to- NOx conversion factors shows that they can account for the NOx chemistry in plumes, in particular for the conversion between NO and NO2 near the source and for the chemical loss of NOx further downstream. When applying these time-since-emission-dependent conversion factors, biases in NOx emissions estimated from TROPOMI NO2 images are greatly reduced from between - 50 % and - 42 % to between only - 9.5 % and - 0.5 % in comparison with reported emissions. Single-overpass estimates can be quantified with an uncertainty of 20 %–27 %, while annual NOx emission estimates have uncertainties in the range of 4 %–21 % but are highly dependent on the number of successful retrievals. Although more simulations covering a wider range of meteorological and trace gas background conditions will be needed to generalise the approach, this study marks an important step towards a consistent, uniform, high-resolution and near-real-time estimation of NOx emissions – especially with regard to upcoming NO2 -monitoring satellites such as Sentinel-4, Sentinel-5 and CO2M. [ABSTRACT FROM AUTHOR]

Atmospheric emissions from anthropogenic hotspots, i.e., cities, power plants and industrial facilities, can be determined from remote sensing images obtained from airborne and space-based imaging spectrometers. In this paper, we present a Python library for data-driven emission quantification (ddeq) that implements various computationally light methods such as the Gaussian plume inversion, cross-sectional flux method, integrated mass enhancement method and divergence method. The library provides a shared interface for data input and output and tools for pre- and post-processing of data. The shared interface makes it possible to easily compare and benchmark the different methods. The paper describes the theoretical basis of the different emission quantification methods and their implementation in the ddeq library. The application of the methods is demonstrated using Jupyter notebooks included in the library, for example, for NO 2 images from the Sentinel-5P/TROPOMI satellite and for synthetic CO 2 and NO 2 images from the Copernicus CO 2 Monitoring (CO2M) satellite constellation. The library can be easily extended for new datasets and methods, providing a powerful community tool for users and developers interested in emission monitoring using remote sensing images. [ABSTRACT FROM AUTHOR]

Porches, as defined by the Art & Architecture Thesaurus, serve as vital transitional spaces linking indoor and outdoor environments. Despite their historical and contemporary significance, porches lack explicit representation in prevalent standards like CityGML and IndoorGML, posing challenges for comprehensive spatial modeling and its application. This paper proposes a method for modeling porches that aligns with the existing OGC standard CityGML 3.0, ensuring accuracy and compatibility. Drawing upon geomatics techniques, the method aims to bridge the gap in representing these spaces, critical for applications such as navigation systems, urban planning, and energy simulations. By integrating geometric, machine learning, and informative modeling approaches, this method seeks to provide a robust foundation for various practical applications. The paper outlines a comprehensive state-of-the-art review, describes the proposed method from digitalization to random forest (RF)-based point cloud classification and vectorization, presents case studies and results, and offers critical discussions and conclusions. Through this endeavor, the paper contributes to enhancing the representation and understanding of porches within the digital spatial landscape. [ABSTRACT FROM AUTHOR]

This paper describes the process of creating a global survey of experts to evaluate drought resilience indicators. The lessons learned include five main points: (1) the heterogeneity in the conceptual background should be minimized before the construction of the survey; (2) large numbers of indicators decrease the engagement of respondents through the survey, and ways to apportion indicators whilst maintaining reliability should be considered; (3) it is necessary to design the survey to balance response rate and accuracy; (4) the survey questions should have clear statements with a logical and flowing structure; and (5) reaching experts with different domain experience and representing different regions is difficult but crucial to minimize biased results. [ABSTRACT FROM AUTHOR]

This paper demonstrates the observation of wind shear and veer directly from the operational response of a wind turbine equipped with blade load sensors. Two independent neural-based observers, one for shear and one for veer, are first trained using a machine-learning approach and then used to produce estimates of these two wind characteristics from measured blade load harmonics. The study is based on a dataset collected at an experimental test site featuring a highly instrumented 8 MW wind turbine, an IEC-compliant (International Electrotechnical Commission) met mast, and a vertical profiling lidar reaching above the rotor top. The present study reports the first demonstration of the measurement of wind veer with this technology and the first validation of shear and veer with respect to lidar measurements spanning the whole rotor height. Results are presented in terms of correlations, exemplary time histories, and aggregated statistical metrics. Measurements of shear and veer produced by the observers are very similar to the ones obtained with the widely adopted profiling lidar while avoiding its complexity and associated costs. [ABSTRACT FROM AUTHOR]

The registration of full-moon remote sensing images constitutes a pivotal stage in the fusion analysis of multiple lunar remote sensing datasets. Addressing prevailing issues in automatic registration, such as the broad width of full-moon data, significant internal distortion, and texture distortion in high-latitude regions, this paper proposes a method for automatic matching and correction based on triangulation constraints. The approach employs a matching strategy progressing from coarse to fine and from sparse to dense. It optimizes and combines multiple existing matching algorithms, enhances the extraction of initial network points, constructs irregular triangulation networks using these points, conducts dense matching with each triangulation network as a basic unit, and introduces a geometric correction method based on triangulation network + grid (TIN + GRID) for the registration of full-moon data. For the matching of full-moon remote sensing images in high-latitude regions, a novel approach involving memory projection forward transformation-matching-projection inverse transformation is adopted. Through registration experiments with full-moon image data and an analysis of registration accuracy at different latitudes, the average mean square error is found to be less than 2 pixels. These results signify the efficacy of the proposed method in effectively addressing the automatic registration challenges encountered in full-moon remote sensing images. [ABSTRACT FROM AUTHOR]

Avalanche risk assessment is complex and challenging, with terrain assessment as one of the most fundamental factors. To aid people's terrain assessment, Parks Canada developed the Avalanche Terrain Exposure Scale (ATES), a system that classifies the severity of avalanche terrain into five classes from non-avalanche terrain to extreme terrain. Manual classification is laborious and dependent on expert's assessments. To ease the process Larsen et al. (2020) developed an automated ATES model (AutoATES v1.0). Although the model allowed large-scale mapping, it had some significant limitations. This paper presents an improved AutoATES v2.0 model improving the potential release area (PRA) model, utilizing the new Flow-Py runout simulation package. Furthermore, it incorporates forest density data in the PRA, in Flow-Py, and in a newly developed post-forest-classification step. AutoATES v2.0 has also been rewritten in open-source software, making it more widely available. The paper includes a validation of the model measured against two consensus maps made by three experts at two different locations in western Canada. For Bow Summit, the F1 score (a measure of how well the model performs) improved from 64 % to 77 %. For Connaught Creek, the F1 score improved from 40 % to 71 %. The main challenge limiting large-scale ATES classification is the determination of optimal input parameters for different regions and climates. In areas where AutoATES v2.0 is applied, it can be a valuable tool for avalanche risk assessment and decision-making. Ultimately, our goal is for AutoATES v2.0 to enable efficient, regional-scale, and potentially global ATES mapping in a standardized manner rather than based solely on expert judgment. [ABSTRACT FROM AUTHOR]

In the context of natural hazard risk quantification and modeling of hazard interactions, some literature separates "Level I" (or occurrence) interactions from "Level II" (or consequence) interactions. The Level I interactions occur inherently due to the nature of the hazards, independently of the presence of physical assets. In such cases, one hazard event triggers or modifies the occurrence of another (e.g., flooding due to heavy rain, liquefaction and landslides triggered by an earthquake), thus creating a dependency between the features characterizing such hazard events. They differ from Level II interactions, which instead occur through impacts/consequences on physical assets/components and systems (e.g., accumulation of physical damage or social impacts due to earthquake sequences, landslides due to the earthquake-induced collapse of a retaining structure). Multi-hazard life cycle consequence (LCCon) analysis aims to quantify the consequences (e.g., repair costs, downtime, casualty rates) throughout a system's service life and should account for both Level I and II interactions. The available literature generally considers Level I interactions – the focus of this study – mainly defining relevant taxonomies, often qualitatively, without providing a computational framework to simulate a sequence of hazard events incorporating the identified interrelations among them. This paper addresses this gap, proposing modeling approaches associated with different types of Level I interactions. It describes a simulation-based method for generating multi-hazard event sets (i.e., a sequence of hazard events and associated features throughout the system's life cycle) based on the theory of competing Poisson processes. The proposed approach incorporates the different types of interactions in a sequential Monte Carlo sampling method. The method outputs multi-hazard event sets that can be integrated into LCCon frameworks to quantify interacting hazard consequences. An application incorporating several hazard interactions is presented to illustrate the potential of the proposed method. [ABSTRACT FROM AUTHOR]

The optimization of aircraft trajectories involves balancing operating costs and climate impact, which are often conflicting objectives. To achieve compromised optimal solutions, higher-level information such as preferences of decision-makers must be taken into account. This paper introduces the SolFinder 1.0 module, a decision-making tool designed to identify eco-efficient aircraft trajectories, which allow for the reduction of the flight's climate impact with limited cost penalties compared to cost-optimal solutions. SolFinder 1.0 offers flexible decision-making options that allow users to select trade-offs between different objective functions, including fuel use, flight time, NOx emissions, contrail distance, and climate impact. The module is included in the AirTraf 3.0 submodel, which optimizes trajectories under atmospheric conditions simulated by the ECHAM/MESSy Atmospheric Chemistry model. This paper focuses on the ability of the module to identify eco-efficient trajectories while solving a bi-objective optimization problem that minimizes climate impact and operating costs. SolFinder 1.0 enables users to explore trajectory properties at varying locations of the Pareto fronts without prior knowledge of the problem results and to identify solutions that limit the cost of reducing the climate impact of a single flight. [ABSTRACT FROM AUTHOR]

The single-column model, with its advantages of low computational cost and fast execution speed, can assist users in gaining a more intuitive understanding of the impact of parameters on the simulated results of climate models. It plays a crucial role in the study of parameterization schemes, allowing for a more direct exploration of the influence of parameters on climate model simulations. In this paper, we employed various methods to conduct sensitivity analyses on the 11 parameters of the Single Column Atmospheric Model (SCAM). We explored their impact on output variables such as precipitation, temperature, humidity, and cloud cover, among others, across five test cases. To further expedite experimentation, we utilized machine learning methods to train surrogate models for the aforementioned cases. Additionally, three-parameter joint perturbation experiments were conducted based on these surrogate models to validate the combined parameter effects on the results. Subsequently, targeting the sensitive parameter combinations identified from the aforementioned experiments, we further conducted parameter tuning for the corresponding test cases to minimize the discrepancy between the results of SCAM and observational data. Our proposed method not only enhances model performance but also expedites parameter tuning speed, demonstrating good generality at the same time. [ABSTRACT FROM AUTHOR]

When comparing model output with historical radiosonde observations, it is usually assumed that a radiosonde has risen exactly above its starting point and has not been displaced by wind. This changed only relatively recently with the availability of Global Navigation Satellite System (GNSS) receivers aboard radiosondes in the late 1990s, but even then the balloon trajectory data were often not transmitted, although this information was the basis for estimating the wind in the first place. Depending on the conditions and time of year, radiosondes can sometimes drift a few hundred kilometres, particularly at the middle latitudes during the winter months. The position errors can lead to non-negligible representation errors when the corresponding observations are assimilated. This paper presents a methodology to compute changes in the balloon position during its vertical ascent, using only limited information, such as the vertical profile of wind contained in the historical observation reports. The sensitivity of the method to various parameters is investigated, such as the vertical resolution of the input data, the assumption about the vertical ascent speed of the balloon, and the departure of the surface of Earth from a sphere. The paper considers modern GNSS sonde data reports for validation, for which the full trajectory of the balloon is available, alongside the reported wind. Evaluation is also conducted by comparison with ERA5 and by conducting low-resolution data assimilation experiments. Overall, the results indicate that the trajectory of the radiosondes can be accurately reconstructed from original data of varying vertical resolutions and that the more accurate balloon position reduces representation errors and, in some cases, systematic errors. [ABSTRACT FROM AUTHOR]

Forest harvesting is one of the anthropogenic activities that most significantly affect the carbon budget of forests. However, the absence of explicit spatial information on harvested carbon poses a huge challenge in assessing forest-harvesting impacts, as well as the forest carbon budget. This study utilized provincial-level statistical data on wood harvest, the tree cover loss (TCL) dataset, and a satellite-based vegetation index to develop a Long-term harvEst and Allocation of Forest Biomass (LEAF) dataset. The aim was to provide the spatial location of forest harvesting with a spatial resolution of 30 m and to quantify the post-harvest carbon dynamics. The validations against the surveyed forest harvesting in 133 cities and counties indicated a good performance of the LEAF dataset in capturing the spatial variation of harvested carbon, with a coefficient of determination (R2) of 0.83 between the identified and surveyed harvested carbon. The linear regression slope was up to 0.99. Averaged from 2003 to 2018, forest harvesting removed 68.3 ± 9.3 Mt C yr -1 , of which more than 80 % was from selective logging. Of the harvested carbon, 19.6 ± 4.0 %, 2.1 ± 1.1 %, 35.5 ± 12.6 % 6.2 ± 0.3 %, 17.5 ± 0.9 %, and 19.1 ± 9.8 % entered the fuelwood, paper and paperboard, wood-based panels, solid wooden furniture, structural constructions, and residue pools, respectively. Direct combustion of fuelwood was the primary source of carbon emissions after wood harvest. However, carbon can be stored in wood products for a long time, and by 2100, almost 40 % of the carbon harvested during the study period will still be retained. This dataset is expected to provide a foundation and reference for estimating the forestry and national carbon budgets. The 30 m × 30 m harvested-carbon dataset from forests in China can be downloaded at 10.6084/m9.figshare.23641164.v2 (Wang et al., 2023). [ABSTRACT FROM AUTHOR]

In the Split City area, with an air distance of approximately 18 km, the survey of land surface temperature (LST) and urban heat islands (UHI) was detected. It also shows how local geomorphology, especially the density of urban areas (especially densely built high-rise buildings and urban canyons) and the amount of greenery and water surfaces, affect the UHI of the observed area. The paper uses a known method of classifying local climatic zoning (LCZ) and its coincidence with the zones of the highest urban temperatures. The paper highlights the critical areas and suggests possible solutions to reduce the UHI. [ABSTRACT FROM AUTHOR]

The effective tracking and analysis of moving objects within urban environments presents a complex challenge that necessitates robust geospatial data integration. Open Geospatial Consortium (OGC) APIs offer standardized approaches to managing dynamic geospatial information. This paper presents a case study of real-time moving object tracking including buses and trains in the city of Munakata, Japan, utilizing two prominent OGC APIs: OGC API Moving Features and OGC SensorThings API. The study explores the implementation of both APIs, examining their strengths and limitations in handling real-time location updates and associated sensor data generated by moving buses. The research provides insights into the practical suitability of each API model for dynamic object tracking, offering valuable guidance for practitioners seeking to optimize geospatial data integration within smart cities and intelligent transportation systems. [ABSTRACT FROM AUTHOR]

Geological data provide an essential source of information for space planning in the subsurface. Three-dimensional geological models make this information about the subsurface available for various users and use cases. There is a significant demand for subsurface information in city planning, including the modeling of buildings and infrastructures. This demand arises from the interaction between geological processes and the (potential) use of the underground. The paper introduces a concept of a voxel model that includes buildings, traffic infrastructure and the geological structure of the subsurface. The voxel modeling approach aims to provide a unified visualization of geological and urban modeling elements. Furthermore, an analysis of the interaction between buildings and their environment, characterized by geological properties, such as strength of the construction ground or hydraulic and heat conductivity should be feasible. Finally, this paper discusses the feasibility of the concept, based on a case study for the city center of Stuttgart, Germany. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power generation is one of most promising means to prevent global warming in the present Japan. Since solar panels mounted on building façades are expected to come into wide use in urban areas, accurate estimation of PV potential of building façades is necessary for urban energy management planning. Accordingly, we have developed a system to estimate PV potential of urban buildings using a 3D city model. The system has two significant features: rapid estimation of hourly solar irradiance of points densely distributed on a building surface, and more flexible estimation of PV potential considering an arrangement of solar panels on a building surface. The paper reports our newly developed method to estimate PV potential of urban buildings considering an arrangement of solar panels using dense solar irradiance distribution on a building surface. The rapid estimation of dense solar irradiance distribution on a building surface enables the system to handle more flexible arrangement of solar panels with providing width and height of a solar panel, and clearance around solar panels. Considering some restrictions such as minimum solar irradiance of a solar panel makes PV potential estimated by the system become more realistic. The paper reports experiments conducted in seven urban districts in Japan to investigate the flexibility of the method by using various settings of panel installing conditions. Experiment results indicate that our developed method can estimate PV potential flexibly considering an arrangement of solar panels corresponding to various settings of panel installing conditions such as size of a solar panel. [ABSTRACT FROM AUTHOR]

Research on handheld LiDAR data has recently been proliferated due to the emergence of digital twins and indoor mapping. However, most of the existing studies cannot be reproduced in another computational environment. Computational reproducibility requires data, code/software, and computational environment (e.g. versions, settings, etc.) to be openly available. Although there are an increasing number of researches that contribute towards open data, there are still few studies investigating the remaining two aspects. One of the common tasks in digital twin research is the estimation of indoor space areas. This paper contributes to the computational reproducibility of estimating the area of indoor spaces on a handheld LiDAR dataset using the DBSCAN algorithm. The collected dataset -representing the Geomatics Engineering Department of Hacettepe University, code, and the computational environment was made openly available to satisfy the requirements of computational reproducibility. Three different experiments have been carried out: i) identification of the optimal DBSCAN parameter values for a single indoor space, ii) evaluating to what extent these values are applicable to other rooms, and iii) investigating the effect of room enter/exit times on the estimated room sizes. The main finding of this paper is that the simple consideration of an open-door, which reduces data collection time, the uncertainty of a wall's coordinates, and imperfect choice of DBSCAN parameters, may substantially increase the estimated indoor space size ranging between approximately 40% to 300%. Consequently, relying solely on the DBSCAN algorithm for indoor space area estimation should not be considered as a valid approach. [ABSTRACT FROM AUTHOR]