Search

Micro fins on the internal surface of the tube improves its heat transfer ability. This paper investigates the thermal performance of tube flow numerically by adding axial straight micro fins (ASMF) on internal tube surfaces. The numerical method is experimentally validated using a tube featuring ASMF. The effects of fin height e , fin number N f , and fin shape of the tube with ASMF on the thermal performance are numerically studied within the range of Reynolds number (Re) from 1280 to 7687. Compared to a smooth tube, the Nusselt number (Nu) for tube with ASMF is reduced over the entire range of Re. In order to assess the performance of heat transfer, the ratio of the heat transfer coefficient (h) multiplying the heat transfer area (F) of ASMF tube (hF) to that of the smooth tube (h s F s) is utilized. Parametric studies were performed. The optimal fin height, fin number are found to be 0.0429 and 32. The optimal fin profile is found to be quadratic function profile. By combining the optimal fin height, fin number and fin profile, the maximum value of hF /(h s F s) can reach 1.32. Besides, the heat transfer enhancement mechanism induced by ASMF is also disclosed in this paper. [ABSTRACT FROM AUTHOR]

Corrugated tubes are extensively unitized in enhancing heat transfer within tubular heat exchange devices. The efficiency of these corrugated tubes is closely linked to the geometric characteristics of the surface corrugations. In this study, we conducted an extensive series of Large Eddy Simulations on a representative type of enhanced tube featuring periodic inward corrugations (PIC). Our goal was to compile a comprehensive and precise dataset of the thermal and hydraulic properties specific to this design. The key design parameters that define the corrugated patterns are corrugation height (H), corrugation width (W), and the length of the straight section (P). We systematically explored these parameters to understand their impact on heat transfer and fluid dynamics. Among these parameters, corrugation height (H) has been identified as the most influential factor affecting flow and heat transfer properties. As the corrugation height varies from 1/8D to 3/8D, we observed a substantial increase in the friction factor and Nusselt number by a factor of 209 and 5, respectively, at Re = 1000; while the critical Reynolds number decreased roughly from 800 to 100. These findings underscore the significant role of corrugation height in shaping the flow and heat transfer performance of PIC tubes. The other two parameters, corrugation width and straight section length, were also found to be crucial in determining the overall heat transfer coefficient and pressure drop. When Re = 1000, variations in W/D from 1 to 3 resulted in a 1.3-fold increase in both the f and the Nu. Furthermore, altering the P/D from 2 to 6 led to a 2.1-fold increase in f and a 2.2-fold increase in Nu. The results of our study suggest that when utilizing this type of corrugated tubes, careful consideration is required to strike an optimal balance between heat transfer efficiency and pressure loss. The large-sets LES results presented in this paper can serve as valuable inputs for optimizing the design of PIC tubes. [ABSTRACT FROM AUTHOR]

Particle-based moving bed heat exchangers are increasingly playing a significant role in industrial energy conservation and solar energy utilization. However, the moving bed heat exchanger used for cohesive granular materials still needs to be developed. This paper investigates the feasibility of indirect heat transfer of cohesive granular materials through a moving bed heat exchanger. A vibrating moving bed heat exchanger is developed for the metallurgical slag of vanadium-titanium (MSVT) from industry. The experiment demonstrates that the vibrating moving bed heat exchanger can establish an approximate mass flow regime of MSVT in the experimental section. The vibration device designed for the experimental and discharge section effectively resolves bridging and the intermittent collapse of arching in cohesive granular materials. The outer side of the tube is tightly wrapped by MSVT with vibration. Significant differences are observed in the flow and heat transfer behavior of MSVT between the aligned and staggered tubes. The local heat transfer coefficient at the top and bottom of the aligned tubes exhibits much lower sensitivity to flow velocity compared to the staggered tubes. The relationship between Nu −1 and Pe −0.5 or MSVT around the aligned and staggered tubes follows a linear correlation. Compared to aligned tubes, Nu −1 for MSVT in staggered tubes shows an average reduction of 28%. [Display omitted] • A vibrating moving bed heat exchanger is developed for cohesive granular materials. • Special experimental design can resolve bridging and arching between tubes. • Rheological properties of vanadium-titanium granular are quantitatively evaluated. • The heat transfer of granular flow is tested around different tube arrangements. • The heat transfer correlations are built to predict the heat transfer. [ABSTRACT FROM AUTHOR]