Search

The use of remote sensing technique to monitor atmospheric water vapor is significant for weather and climate studies. However, the general methods of retrieving precipitable water vapor (PWV) with high precision and high resolution using remote sensing satellite has hardly been investigated, which becomes the focus of this paper. A general remote sensing PWV retrieval (GRPR) method that uses level-1 near-infrared (NIR) data sympathized by a global navigation satellite system (GNSS) is proposed. In this method, the atmospheric transmittance coefficients are determined by combining the radiative transmission model and the central wavelength interpolation method instead of directly using the traditional empirical values. Next, the PWV derived from remote sensing NIR data is obtained using the adaptive seasonal exponent model rather than the traditional transmittance–water vapor lookup table method. Furthermore, the accuracy of remote sensing NIR PWV is further calibrated by establishing the seasonal relationship between PWV residual and elevation. The corresponding NIR data from the Fengyun-3A (FY3A) satellite over the period of 2013–2015 in China are selected to validate the proposed method. Statistical results show the good performance of GRPR method for internal and external accuracies with root mean square (RMS) improvement rates of 76.8% and 72.4%, respectively, compared with the FY3A level-2 PWV products. In addition, the proposed method has good robustness and is almost unaffected by the PWV magnitude at different seasons. Proposed GRPR method is also applied for PWV retrieval at different time scales, further showing its superiority of retrieving PWV with high precision and high resolution. These results indicate the good application prospect of the GRPR method proposed in this study for generating remote sensing PWV products. • The optimal atmospheric transmittance coefficients are determined in this study. • An adaptive seasonal exponent model is developed to retrieve remote sensing PWV. • The accuracy of remote sensing NIR PWV is further calibrated using DEM data. • GRPR method is applied for remote sensing PWV retrieval at different time scales. [ABSTRACT FROM AUTHOR]

• The ISP method allows for gathering a large number of historical training samples. • The SRVI values of the same crop planted in neighboring years range from 0.91 and 1.2. • A distinct northward expansion trend is evident for all four major crops, in Heilongjiang Province, China. Mapping agricultural information such as cropping area and type is of great significance for land use and food security and a common method to retrieve such information is satellite imagery classification. The current image classification techniques require a statistically large number of training samples to obtain representative spectral signatures, ideally collected during the satellite overpass time/date. Although this prerequisite sounds simple and easy in principle, it is extremely challenging and sometimes impossible when classifying historical satellite images, as one simply cannot go back in time to collect training datasets or ground truthing. In this paper, we introduce an iterative and subsequent proximation (ISP) method to circumvent this problem for historical image classifications for historical crop mapping. This method assumes that the same crops grown two years apart have similar spectral properties within the same growing season, with limited variation. This allows the use of the crop information classified in any given year (n) to be used as training samples for the next year (n + 1) or the previous year (n-1). Iteratively repeating n-1, n-2... process leads to the mapping of historical cropping information without a priori ground truthing data. To demonstrate the ISP feasibility, we first used the historical Landsat time-series data to map four major stable crops (rice, maize, soybean, and wheat) in Hailun County, Heilongjiang Province, China, and then further expanded the ISP application to the entire Heilongjiang Province to map cropping areas from 1982 to 2020, using the classification and regression trees (CART) algorithm. The results were validated for those years when actual cropping measurement data were available and further verified with statistical data for other years. The results indicated that the proposed ISP method was appropriate for the historical mapping of four major crops, with a mapping accuracy of approximately 80 % when validated with field data, and correlation coefficients of 0.86, 0.85, 0.91, and 0.94, respectively when compared with historical statistical cropping data. The crop mapping results showed distinct trends of northward expansion in each of the four crops in Heilongjiang Province, which agreed well with previous studies. In conclusion, the ISP method is quick, easy, and convenient for historical crop mapping, which is important in understanding the agricultural production history. [ABSTRACT FROM AUTHOR]

Aerosol types have crucial and distinguished impacts on climate effects and cause the difference of air pollution. However, direct retrieval of aerosol type by satellite remote sensing is difficult, and the satellite products of aerosol type are seriously lacking. At present, the identification of aerosol type is mainly based on ground-based observation data, but the coverage area of ground-based stations is limited, and large-scale spatial continuous monitoring cannot be carried out. The existing aerosol type identification methods based on satellite data need to combine multiple satellites data (e.g. Moderate-resolution Imaging Spectroradiometer (MODIS), Ozone Monitoring Instrument (OMI), etc.) which leads to a low temporal resolution. The research about aerosol type identification only based on geostationary satellite data is lacking. Therefore, aerosol type identification based on the multi-parameter threshold method and the neural network method are proposed and compared in this paper. The neural network jointly using spectral and temporal information was trained and tested by the measurements from 26 sites of Aerosol Robotic Network (AERONET) and Sun-Sky Radiometer Observation Network (SONET). For the overall validation, the aerosol type identification based on the neural network is better than that based on the multi-parameter threshold method, and the accuracy reaches 71.44%. Atmospheric environment monitoring and quantitative remote sensing can be supported by this study. • Aerosol type, neural network, geostationary satellite [ABSTRACT FROM AUTHOR]

• Sensor technology developments drove advances in biophysical estimation techniques. • CubeSat constellations will increase VHR data accessibility to various users. • Sentinel-2 red-edge bands present prospects for operational crop stress detection. • RF is prominently used in the literature despite new developments in algorithms. • Retrieval models developed in Mediterranean areas do not apply to semi-arid areas. This paper provides an overview of the recent developments in remote sensing technology and machine learning algorithms for estimating important biophysical and biochemical parameters for precision farming. The objectives are (i) to provide an overview of recent advances in remotely sensed retrieval of biophysical and biochemical parameters brought by the developments in sensor technologies and robust machine learning algorithms and (ii) to identify the sources of uncertainty in retrieving biophysical and biochemical parameters and implications for precision agriculture. The review revealed that developments in crop biophysical and biochemical parameters retrieval techniques were mainly driven by announcements and the availability of new sensors. Two ground-breaking events can be identified, i.e., the availability of Sentinel-2 and the SuperDove constellation. The two provide high temporal-high spatial resolution data relevant for site-specific management and super-spectral configuration, enabling retrieval of crop growth and health parameters. The free availability of Sentinel-2 triggered the testing of its spectral configurations and upscaling of retrieval approaches using simulated data from field spectrometers and airborne hyperspectral sensors. SuperDoves will likely reduce the cost of very high-resolution data while providing unprecedented capabilities for detailed, accurate and frequent characterisation of field variability. Studies showed that the red-edge bands and hybrid models coupling Radiative Transfer Model (RTM) and machine learning regression algorithms (MLRA) are promising for operational and accurate monitoring of stress-related crop parameters to aid time-sensitive agronomic decisions. However, such models were tested in Mediterranean climates and performed poorly in African semi-arid areas and China's temperate continental semi-humid monsoon climates. Therefore, locally-calibrated RTM models incorporating crop-type maps and other spatio-temporal constraints may reduce uncertainties when adapted to data-scarce regions. Generally, permanent experimental sites and a lack of systematic calibration data on various crops are some limiting factors to using remote sensing technologies for PA in Sub-Saharan Africa. Other complexities arise from farm configurations, such as small field sizes and mixed cropping practices. Therefore, future studies should develop generic, scalable and transferable models, especially within under-studied areas. [ABSTRACT FROM AUTHOR]

• An ecological risk assessment model of Jiaozhou bay in China is established. • The model is developed based on multi-source satellite and in-situ sample datasets. • The effects of multiple risk sources threatening the ecology are considered. • The risk sources for multiple years are detected using remote sensing images. • The ecological risk situation of Jiaozhou Bay for multiple years is assessed. Healthy coastal area have high ecological service value. However, because of the uncontrolled utilization of marine resources and the discharge of pollutants, the ecological environments of many coastal areas are faced with ecological risks, such as oil spills and Enteromorpha blooms. Therefore, it is of great significance to monitor and assess the ecological risks in coastal areas. The remote sensing technique can be used to obtain frequent and wide-coverage images of the areas of interest, and has become an effective tool to monitor the ecological risks occurring in coastal areas. In this study, taking Jiaozhou Bay in China as the study area, an innovative ecological risk assessment framework was established using multi-source remote sensing images and in-situ sample data, which fully considers the potential harm of oil spills and Enteromorpha blooms on the ecology of the bay. Specifically, the oil spill risk for Jiaozhou Bay from 2017 to 2019 was identified by a deep learning based method from synthetic aperture radar (SAR) images, and the Enteromorpha bloom risk for the corresponding years was identified by a floating algae index (FAI) threshold method from multi-source optical images. Then, using habitat information and ground observation data about the marine species in the bay, environmental vulnerability maps were generated. Finally, a disaster-causing factors and disaster-bearing factors weighted risk assessment model was developed. The risk source monitoring results show that the occurrence frequency of oil spills in Jiaozhou Bay decreased from 2017 to 2019, while the outbreak intensity of Enteromorpha blooms generally became higher. The ecological risk assessment results reveal that the high risk areas of Jiaozhou Bay are mainly around the transportation regions and the ports, with a higher risk degree in the eastern and southern parts. To support our work, the well-trained oil spill detection network model and some information about the oil spill events that have occurred in Jiaozhou Bay are provided in this paper. [ABSTRACT FROM AUTHOR]

[Display omitted] • Eco-environment assessment of 3 756 urban residential quarters in Xi'an, China. • Factors affecting the ecological environment of residential quarters have been detected. • Specific reference construction values for the eco-environment of residential quarters have been proposed. Residential quarters are a critical component of urban areas, which significantly affects people's health and quality of life. In recent decades, the high-density and crowded residential quarters have become the mainstream organizational model of construction in China, because of the rapid and massive urbanization in many cities. This results in the contradiction between the eco-environment needs and the accommodation needs. Therefore, a systematic evaluation of the eco-environment in residential quarters is urgently needed to address the drawbacks of current residential quarters' planning and design. This paper aims to explore ways to improve the eco-environment with residential quarters from the perspective of China. We first used the Remote Sensing Ecological Index (RSEI) to evaluate the eco-environmental quality of 3, 756 residential quarters in the main urban areas of Xi 'an, China. Then, we quantitatively analyzed the landscape patterns of the impervious surfaces in these residential quarters. Finally, we characterized the impacts of residential quarters layout on the ecological environment by using the vegetation coverage (FVC), the normalized difference bare soil index (NDBSI), building density (BD), the residential density (RD), and the population density (PD) as main factors. The results are as follows: (1) Only 20.5 % of residential quarters with good eco-environments were distributed between the Second and Third Ring Road, indicating the need for improvement in creating livable eco-environments. (2) The shape of the impervious surface of excellent ecological quarters is complex and broken, the average patch area is smaller, and the degree of aggregation and combination of patches is lower compared to residential quarters with poor ecological quality. Therefore, it is recommended to reduce the connectivity of the impervious surface to improve the eco-environment of residential quarters. (3) Among the factors affecting RSEI of residential quarters, FVC, and NDBSI contribute more than other factors. For the construction of excellent eco-environments in residential quarters, we suggest that vegetation coverage should be no less than 0.4, the impervious surface coverage should be no more than 0.53, the building density should be between 0.28 ∼ 0.35, residential density should be no more than 0.22, and the population density of residential quarter should be under 0.29. Overall, for open and low-density residential quarters, the living environment can be improved by enriching vegetation and reducing impervious surfaces, while compact, high-density residential quarters can create a livable eco-environment by optimizing the impervious surface landscape patterns. [ABSTRACT FROM AUTHOR]