Search

[Display omitted] • (1) Trachydacites have zircon U-Pb ages of 116 Ma and were coeval with the most extensive thinning of the North China Craton. • (2) 116 Ma trachydacites were related to subduction of Yangtze Craton and Paleo-Pacific plate. • (3) The mantle source underneath the southeastern North China Craton was modified by the subduction of the Yangtze Craton. The North China Craton has witnessed a large-scale lithospheric thinning event in the Mesozoic. The volcanic rocks of the Qingshan Group formed during the destruction of the North China Craton, therefore retaining important information to the deep processes in this region. Zircon U-Pb dating and geochemical analyses have been carried out on volcanic rocks of the Qingshan Group collected from southeastern margin of the Jiaolai Basin. In combination with previously published data on the volcanic rocks of the Qingshan Group, the newly acquired data show that: (1) the volcanic rocks of Qingshan Group in Mashan have SiO 2 content of 62.82 ∼ 66.3 wt% and total alkali content (K 2 O + Na 2 O) of 7.64 ∼ 9.34 wt%. According to TAS diagram, they belong to trachydacite which experienced strong fractionation between LREEs and HREEs with depletion of HFSEs and enrichment of LILEs. (2) The crystallization age of trachydacite in Mashan is 116.4 ± 2.3 Ma (MSWD = 1.9, n = 9). The magma originated from the partial melting of the ancient lower crust and the enriched lithospheric mantle metasomatized by the fluids/melts released from the subducted slab of the Yangtze Craton. (3) The formation age of magmatic rocks in western Shandong is generally earlier than that in eastern Shandong, while the lower crust delamination in western Shandong preceded that in eastern Shandong. The occurrence of magmatism in eastern Shandong is probably attributed to the delamination process in western Shandong as well as the ongoing tectonic activities along the Tan-Lu fault zone. The lithospheric thinning of the North China Craton was mainly controlled by the change of the subduction angle of the Paleo-Pacific plate, and is probably influenced by the continuous activity of the Tan-Lu fault zone in eastern Shandong. [ABSTRACT FROM AUTHOR]

Important biogeochemical processes occur in sediments at fine scales. Sampling techniques capable of yielding information with high resolution are therefore needed to investigate chemical distributions and fluxes and to elucidate key processes affecting chemical fates. In this study, a high-resolution diffusive gradients in thin-films (DGT) technique was systematically developed and tested in a controlled sediment system to measure organic contaminants, antibiotics, for the first time. The DGT probe was used to resolve compound distributions at the mm scale. It also reflected the fluxes from the sediment pore-water and remobilization from the solid phase, providing more dynamic information. Through the fine scale detection, a reduction of re-supply was observed over time, which was concentration and location dependent. Compared to the Rhizon sampling method, antibiotic concentrations obtained by DGT probes were less than the pore-water concentrations, as DGT measures the labile fraction of the compounds. The DGT probe was also tested on an intact sediment core sampled from a lake in China and used to measure the distribution of labile antibiotics with depth in the core at the mm scale. The abuse of antibiotics and widespread of their residues influences the ecosystem, induces the generation of super-bacteria, and finally poses threat to human health. Sediments adsorbs pollutants from the aquatic environment, while may also release them back to the environment. We systematically developed DGT probe approach for measuring antibiotics in sediment in situ in high resolving power, it provides information at fine scale to help us investigate biogeochemical processes take place in sediment and sediment-water interface. [Display omitted] • Developed a new in situ high resolution sampling probe for studying antibiotics. • Resolving power reached the mm scale, better than conventional methods. • Vertical distribution of antibiotics in sediments and their transport were determined. • Antibiotics were detected in an intact sediment core using DGT probe. [ABSTRACT FROM AUTHOR]

• Internal P loading in the diversion input shallow Lake Hengshui was studied. • High water P concentration was mainly regulated by the high internal P loading. • Littoral wetland showed higher sedimentation and P release than open water areas. • Detritus burial, coprecipitation, and deposition accelerate P retention in wetlands. • Fe-P dominated the internal P release in the lake, accompanied by Org-P. Diversion input lakes usually have a low catchment area/lake area ratio and pulsing pollution input. Various pollutants might accumulate in the lake continuously owing to the concentration effect under high evaporation but low precipitation over the entire area, typically for sedimentary cyclic elements such as phosphorus (P). However, the detailed transportation, sedimentation, and internal release mechanisms of P in the diversion input lakes remain unclear. This study conducted a year-long investigation of the littoral wetlands and open water areas of the shallow Lake Hengshui in the semi-humid region of North China. Results revealed that the average total P concentrations in the water and surficial sediment reached as high as 0.202 mg L−1 and 878.21 mg kg−1 in summer. The high water P levels in the lake were mainly regulated by the high internal P loading during summer and autumn, with the internal P loading being approximately nine times the external P loading. The littoral wetland area serves as a higher sedimentation sink and release source of P than the open water area. The concentrated P was continuously transported to the littoral wetland area through detritus burial, coprecipitation, and deposition of suspended particles. The release of P was mainly controlled by the dissolution of redox-sensitive Fe-P and Org-P at high temperatures and organic matter mineralization in the sediment, accompanied by the potential release capacity of apatite P (Ca-P). Future management of eutrophication and P levels in similar diversion input lakes should pay more attention to the high internal P loading in the sediment and the differentiated sedimentation and release processes in the littoral wetland and open water areas. [Display omitted] [ABSTRACT FROM AUTHOR]

In the Upper Ediacaran Dengying Formation of the Sichuan Basin, the presence of abundant, well-preserved microbial carbonates provides a unique opportunity to study Precambrian paleoceanography and microbial carbonate origins. Particularly, the underexplored coated grain dolostones of this formation, characterized by distinct microbially induced fabrics and intragranular dissolution, offer crucial insights for understanding late Ediacaran microbial mineralization and diagenetic sequences. Utilizing selected typical samples, we conducted detailed petrographic and geochemical analyses, revealing a dynamic interplay between microbial processes and sedimentary dynamics. We observe the coexistence of constructive micrite envelopes with microbially induced fabrics such as clots and laminations, highlighting microbial biomineralization's key role in fabric formation. The sedimentary dynamics critically determines the formation processes of the coated grains: low-energy settings foster grain agglomeration and consolidation through clot precipitation between grains, while high-energy settings favor smaller grains binding to microbial mats. Geochemically, micrite envelopes play an essential role in preserving distinct rare earth element (REE) signatures. The weak negative Ce anomalies and positive Eu anomalies within these envelopes point to a suboxic to anoxic depositional environment, directly indicative of the microenvironmental conditions conducive to microbial mineralization processes. Furthermore, our study sheds light on the structural evolution of coated grains with hollow nuclei, proposing that their internal pore formations are influenced by both mineral instability and selective dissolution by meteoric freshwater. These findings not only provide fresh insights into complex diagenetic processes in the Dengying Formation but also substantially advance our understanding of early microbial life and environmental adaptations during the Precambrian. • Revealed the relationship between micrite envelopes and microbially induced fabrics • Proposed a novel formation mechanism for coated grain dolostone in the Dengying Fm. • Investigated the diverse environmental responses of microbiolite fabrics • Established micrite envelopes as dependable records of seawater REE compositions [ABSTRACT FROM AUTHOR]

A new method for the determination of 26 legacy and emerging per- and polyfluoroalkyl substances (PFASs) in marine sediment pore water was developed using online solid phase extraction coupled with liquid chromatography-tandem mass spectrometry. The proposed method requires only about 1 mL of pore water samples. Satisfactory recoveries of most target PFASs (83.55–125.30 %) were achieved, with good precision (RSD of 1.09–16.53 %), linearity (R 2 ≥ 0.990), and sensitivity (MDLs: 0.05 ng/L–5.00 ng/L for most PFASs). Subsequently, the method was applied to determine PFASs in the sediment pore water of five mariculture bays in the Bohai and Yellow Seas of China for the first time. Fifteen PFASs were detected with total concentrations ranging from 150.23 ng/L to 1838.48 ng/L (mean = 636.80 ng/L). The ∑PFASs and PFOA concentrations in sediment pore water were remarkably higher than those in surface seawater (tens of ng/L), indicating that the potential toxic effect of PFASs on benthic organisms may be underestimated. PFPeA was mainly distributed in pore water, and the partition of PFHpA (50.99 %) and PFOA (49.01 %) was almost equal in the solid and liquid phases. The proportions of all other PFASs partitioned in marine sediments were significantly higher than those in pore water. [Display omitted] • A convenient method for the detection of PFASs in marine sediment pore water was developed. • Only about 1 mL of actual sediment pore water is needed to determine various PFASs. • High levels of PFASs were detected in pore water from five mariculture bays of China. • Different PFASs exhibit varying partitioning behaviors at the sediment–pore water interface. • Great attention should be paid to PFASs in the sediment pore water of mariculture areas. [ABSTRACT FROM AUTHOR]