Search

With the development of 5th-Generation Mobile Communication (5G) technology and the deployment of low-Earth orbit satellites, using satellites to locate 5G radiation sources is of great significance in commerce and the military as an important task of integrated sensing and communication. Recently, passive virtual aperture technology has been introduced into passive location to improve accuracy, but the existing method, using matched filters to search the Doppler information to realize the location, has the disadvantages of high complexity and poor range resolution. In this paper, an improved 5G radiation source location based on a virtual aperture is proposed, which uses the improved Golden Section search-fractional Fourier algorithm (GSS-FRFT) to improve the existing passive virtual aperture location methods. First, the received signals are coherently accumulated to convert the time gain into spatial gain, and the subcarrier phase information is extracted by Fast Fourier Transform based on the 5G signal characteristics to obtain the azimuth signal. Then, an improved high-order GSS-FRFT algorithm is proposed to analyze the Doppler information, and signal focusing and satellite ephemeris data are used to estimate the effective velocity and solve the radiation source location. The simulation results show that the proposed method can improve the location accuracy compared with other single-satellite location methods and has high resolution, high accuracy and low complexity compared with the existing passive virtual aperture location method. [ABSTRACT FROM AUTHOR]

Expansin is a cell wall relaxant protein that is common in plants and directly or indirectly participates in the whole process of plant root growth, development and morphogenesis. A well-developed root system helps plants to better absorb water and nutrients from the soil while effectively assisting them in resisting osmotic stress, such as salt stress. In this study, we observed and quantified the morphology of the roots of Arabidopsis overexpressing the TaEXPAs gene obtained by the research group in the early stage of development. We combined the bioinformatics analysis results relating to EXPA genes in five plants and identified TaEXPA7-B, a member of the EXPA family closely related to root development in winter wheat. Subcellular localization analysis of the TaEXPA7-B protein showed that it is located in the plant cell wall. In this study, the TaEXPA7-B gene was overexpressed in rice. The results showed that plant height, root length and the number of lateral roots of rice overexpressing the TaEXPA7-B gene were significantly higher than those of the wild type, and the expression of the TaEXPA7-B gene significantly promoted the growth of lateral root primordium and cortical cells. The plants were treated with 250 mM NaCl solution to simulate salt stress. The results showed that the accumulation of osmotic regulators, cell wall-related substances and the antioxidant enzyme activities of the overexpressed plants were higher than those of the wild type, and they had better salt tolerance. This paper discusses the effects of winter wheat expansins in plant root development and salt stress tolerance and provides a theoretical basis and relevant reference for screening high-quality expansin regulating root development and salt stress resistance in winter wheat and its application in crop molecular breeding. [ABSTRACT FROM AUTHOR]

The FibH gene, crucial for silk spinning in insects, encodes a protein that significantly influences silk fiber mechanics. Due to its large size and repetitive sequences, limited known sequences of insect FibH impede comprehensive understanding. Here, we analyzed 114 complete FibH gene sequences from Lepidoptera (71 moths, 24 butterflies) and 13 Trichoptera, revealing single-copy FibH in most species, with 2–3 copies in Hesperinae and Heteropterinae (subfamily of skippers). All FibH genes are structured with two exons and one intron (39–45 bp), with the second exon being notably longer. Moths exhibit higher GC content in FibH compared to butterflies and Trichoptera. The FibH composition varies among species, with moths and butterflies favoring Ala, Gly, Ser, Pro, Gln, and Asn, while Trichoptera FibH is enriched in Gly, Ser, and Arg, and has less Ala. Unique to Trichoptera FibH are Tyr, Val, Arg, and Trp, whereas Lepidoptera FibH is marked by polyAla (polyalanine), polySer (polyserine), and the hexapeptide GAGSGA. A phylogenetic analysis suggests that Lepidoptera FibH evolved from Trichoptera, with skipper FibH evolving from Papilionoidea. This study substantially expands the FibH repertoire, providing a foundation for the development of artificial silk. [ABSTRACT FROM AUTHOR]

Fungal diseases of plants are one of the key factors causing global crop losses. In this study, we isolated a Bacillus velezensis strain VC3, which was found to have a broad-spectrum inhibitory effect on a variety of phytopathogenic fungi through in vitro and in planta experiments, especially on Magnaporthe oryzae and Colletotrichum gloeosporioides. Further genomic and transcriptomic analyses revealed that the B. velezensis VC3 has multiple functional gene clusters encoding for the synthesis of a variety of antifungal secondary metabolites, including antimicrobial peptides (AMPs) and lipopeptides (LPs). In addition, AMPs and LPs were isolated and purified from B. velezensis VC3 fermentation broth and their antifungal activities were verified in this study. AMPs and LPs significantly inhibited spore germination, appressorium formation, and disease development, and AMPs have a better potential for controlling M. oryzae and C. gloeosporioides than LPs. These findings open new avenues for utilizing B. velezensis VC3 as biocontrol agents, providing potential sustainable solutions for agricultural production. [ABSTRACT FROM AUTHOR]

Overlapping uranium and coal resources are widely distributed in the basins of China. The current uranium–coal coordinated mining model, mining interaction, and multi-phase and multi-field coupling mechanisms remain unclear, thereby substantially restricting the mining of overlapping uranium and coal resources. This article reviews the overlapping uranium–coal mining technology and conditions, summarizes the main problems faced by the coordinated mining of coexisting uranium–coal resources, proposes a dynamic coordinated mining technology system for the entire life cycle of coexisting uranium–coal resources, and describes the multiphase and multifield coordinated mining of co-associated uranium–coal resources. The multifield coupling mechanism clarifies the solid–liquid–gas three-phase spatiotemporal coupling effects of the stress, fracture, seepage, geochemical, pressure, and microbial fields, and explains the safe and efficient mining technology of uranium and coal resources, and the coordinated mining and isolation technology of uranium and coal. "Trinity" pollution prevention and control technology and other key research directions are discussed to promote green, efficient, joint, and coordinated mining of uranium and coal. [ABSTRACT FROM AUTHOR]

Simple Summary: The colonization of new areas by invasive insects has been a prominent concern in entomology. Bactrocera dorsalis serves as a typical invasive insect, which has expanded its range from southern to northern regions of China in recent years. Host suitability plays a crucial role in the successful establishment of B. dorsalis populations. In this study, we have observed a decline in the fitness of B. dorsalis when feeding on cucumber, primarily due to significant changes in the gut microbiota composition of the insect. Among them, Empedobacter brevis and Enterococcus faecalis were identified as key factors leading to the reduced fitness of B. dorsalis. These findings confirm the close association between insect fitness and symbiotic bacteria within the insect's body. Furthermore, the source of food and gut bacteria have significant impacts on the invasion of exotic insects. How alien pests invade new areas has always been a hot topic in invasion biology. The spread of the Bactrocera dorsalis from southern to northern China involved changes in food sources. In this paper, in controlled conditions, we take Bactrocera dorsalis as an example to study how plant host transformation affects gut bacteria by feeding it its favorite host oranges in the south, its favorite host peaches and apples in the north, and feeding it cucumbers as a non-favorite host plant, thereby further affecting their fitness during invasion. The result showed that, after three generations of feeding on cucumbers, Bactrocera dorsalis took longer to develop as a larva while its longevity and fecundity decreased and pre-adult mortality increased. Feeding it cucumbers significantly reduced the overall diversity of gut microbiota of Bactrocera dorsalis. The relative abundance of Enterobacter necessary for survival decreased, while the Empedobacter and Enterococcus increased, resulting in decreased carbohydrate transport and metabolism and increased lipid transport and metabolism. Feeding Bactrocera dorsalis Empedobacter brevis and Enterococcus faecalis resulted in a 26% increase in pre-adult mortality and a 2–3 d increase in adult preoviposition period (APOP). Additionally, Enterococcus faecalis decreased the longevity of female and male adults by 17 and 12 d, respectively, and decreased fecundity by 11%. We inferred that the shifted plant hosts played an important role in posing serious harm to Bactrocera dorsalis invading from the south to the north. Therefore, after an invasion of Bactrocera dorsalis into northern China, it is difficult to colonize cucumbers for a long time, but there is still a risk of short-term harm. The findings of this study have established that the interactions between an insect's food source and gut bacteria may have an important effect on insect invasions. [ABSTRACT FROM AUTHOR]

Objectives: Understanding the pathways linking caregiver- and family-level psychosocial factors and child oral health behaviors is critical for addressing oral health disparities. The current study examined the associations between caregiver psychosocial functioning and family chaos and child toothbrushing behaviors in children at high risk for poor oral health outcomes. Methods: Data were drawn from the baseline wave of the CO-OP Chicago Cohort Study (U01DE030067), a longitudinal study on child/caregiver dyads exploring oral health behaviors and caries development in young children (N = 296 dyads; child mean age = 5.36, SD = 1.03; caregiver mean age = 33.8 years, SD = 6.70; caregiver race = 43% Black; caregiver ethnicity = 55% Latinx). The oral health behavioral outcomes included child toothbrushing frequency, child plaque levels, and caregiver assistance with child toothbrushing. The data included demographics; caregiver depression, anxiety, post-traumatic stress disorder (PTSD) symptoms, social functioning, social support, and resilience; and family-level household chaos. Results: Multiple regression models indicated that greater household chaos was significantly related to lower caregiver assistance with child toothbrushing (p = 0.0075). Additionally, caregiver anxiety and PTSD symptoms as well as number of children in the home significantly predicted higher levels of household chaos (p < 0.01). Notably, 18% of caregivers reported clinically significant PTSD. The relationships between caregiver-level psychosocial factors and child oral health behaviors were not significant. Conclusions: The results suggest household chaos may play an important role in child oral health behaviors and highlight the importance of investigating family-level factors for understanding and addressing child oral health risk. [ABSTRACT FROM AUTHOR]

Flexible ammonia (NH3) gas sensors have gained increasing attention for their potential in medical diagnostics and health monitoring, as they serve as a biomarker for kidney disease. Utilizing the pre-designable and porous properties of covalent organic frameworks (COFs) is an innovative way to address the demand for high-performance NH3 sensing. However, COF particles frequently encounter aggregation, low conductivity, and mechanical rigidity, reducing the effectiveness of portable NH3 detection. To overcome these challenges, we propose a practical approach using polyvinyl alcohol-carrageenan (κPVA) as a template for in the situ growth of two-dimensional COF film and particles to produce a flexible hydrogel gas sensor (COF/κPVA). The synergistic effect of COF and κPVA enhances the gas sensing, water retention, and mechanical properties. The COF/κPVA hydrogel shows a 54.4% response to 1 ppm NH3 with a root mean square error of less than 5% and full recovery compared to the low response and no recovery of bare κPVA. Owing to the dual effects of the COF film and the particles anchoring the water molecules, the COF/κPVA hydrogel remained stable after 70 h in atmospheric conditions, in contrast, the bare κPVA hydrogel was completely dehydrated. Our work might pave the way for highly sensitive hydrogel gas sensors, which have intriguing applications in flexible electronic devices for gas sensing. [ABSTRACT FROM AUTHOR]

As a type of cell-wall-relaxing protein that is widely present in plants, expansins have been shown to actively participate in the regulation of plant growth and responses to environmental stress. Wild soybeans have long existed in the wild environment and possess abundant resistance gene resources, which hold significant value for the improvement of cultivated soybean germplasm. In our previous study, we found that the wild soybean expansin gene GsEXLB14 is specifically transcribed in roots, and its transcription level significantly increases under salt and drought stress. To further identify the function of GsEXLB14, in this study, we cloned the CDS sequence of this gene. The transcription pattern of GsEXLB14 in the roots of wild soybean under salt and drought stress was analyzed by qRT-PCR. Using an Agrobacterium rhizogenes-mediated genetic transformation, we obtained soybean hairy roots overexpressing GsEXLB14. Under 150 mM NaCl- and 100 mM mannitol-simulated drought stress, the relative growth values of the number, length, and weight of transgenic soybean hairy roots were significantly higher than those of the control group. We obtained the transcriptomes of transgenic and wild-type soybean hairy roots under normal growth conditions and under salt and drought stress through RNA sequencing. A transcriptomic analysis showed that the transcription of genes encoding expansins (EXPB family), peroxidase, H+-transporting ATPase, and other genes was significantly upregulated in transgenic hairy roots under salt stress. Under drought stress, the transcription of expansin (EXPB/LB family) genes increased in transgenic hairy roots. In addition, the transcription of genes encoding peroxidases, calcium/calmodulin-dependent protein kinases, and dehydration-responsive proteins increased significantly. The results of qRT-PCR also confirmed that the transcription pattern of the above genes was consistent with the transcriptome. The differences in the transcript levels of the above genes may be the potential reason for the strong tolerance of soybean hairy roots overexpressing the GsEXLB14 gene under salt and drought stress. In conclusion, the expansin GsEXLB14 can be used as a valuable candidate gene for the molecular breeding of soybeans. [ABSTRACT FROM AUTHOR]

The axial compressive behaviours of coal gangue concrete-filled steel tube (GCFST) columns after chloride salt corrosion were investigated numerically. Numerical modelling was conducted through the static analysis method by finite element (FE) analysis. The failure mechanism, residual strength, and axial load–displacement curves were validated against tests of the coal gangue aggregate concrete-filled steel tube (GCFST) columns at room and natural aggregate concrete-filled steel tube (NCFST) columns after salt corrosion circumstance. According to the analysis on the stress distribution of the steel tube, the stress value of the steel tube decreased as the corrosion rate increased at the same characteristic point. A parametric analysis was carried out to determine the effect of crucial variation on residual strength. It indicated that material strength, the steel ratio, and the corrosion rate made a profound impact on the residual strength from the FE. The residual strength of the columns exposed to chloride salt was in negative correlation with the corrosion rate. The impact on the residual strength of the column was little, obvious by the replacement rate of the coal gangue. A simplified design formula for predicting the ultimate strength of GCFST columns after chloride salt corrosion exposure was proposed. [ABSTRACT FROM AUTHOR]

The large-size chemical vapor infiltration (CVI) of the carbon/carbon (C/C) composite thermal insulation tube is a key component for drawing large diameter monocrystalline silicon rods. However, the CVI densification process is complex, and the cost of experiment optimization is extremely high. In this article, a multi-physics coupling simulation model was established and validated based on COMSOL Multiphysics v.5.6 software to simulate the fabrication process of an isothermal CVI process for a Φ1185 mm C/C composite thermal insulation tube. The influence of process parameters on densification was explored, and a method of optimization was proposed. Our modeling results revealed that the deposition status in areas of low densification was effectively and significantly enhanced after process optimization. At the monitoring site, the carbon density was no less than 1.08 × 103 kg·m−3, the average density of the composite-material thermal insulation tube improved by 5.7%, and the densification rate increased by 26.5%. This article effectively simulates the CVI process of large-sized C/C composite thermal insulation tubes, providing an important technical reference scheme for the preparation of large-sized C/C composite thermal insulation tubes. [ABSTRACT FROM AUTHOR]

Plastic bronchitis (PB) constitutes a life-threatening pulmonary disorder, predominantly attributed to Mycoplasma pneumoniae (MP) infection. The pathogenic mechanisms involved remain largely unexplored, leading to the absence of reliable approaches for early diagnosis and clear treatment. Thus, the present investigation aimed to develop an MP-induced mouse model of PB, thereby enhancing our understanding of this complex condition. In the first stage, healthy BALB/c mice were utilized to investigate the optimal methods for establishing PB. This involved the application of nebulization (15–20 min) and intratracheal administration (6–50 μL) with 2-chloroethyl ethyl sulfide (CEES) concentrations ranging from 4.5% to 7.5%. Subsequently, the MP model was induced by administering an MP solution (2 mL/kg/day, 108 CFU/50 μL) via the intranasal route for a duration of five consecutive days. Ultimately, suitable techniques were employed to induce plastic bronchitis in the MP model. Pathological changes in lung tissue were analyzed, and immunohistochemistry was employed to ascertain the expression levels of vascular endothelial growth factor receptor 3 (VEGFR-3) and the PI3K/AKT/mTOR signaling pathway. The administration of 4.5% CEES via a 6 µL trachea was the optimal approach to establishing a PB model. This method primarily induced neutrophilic inflammation and fibrinous exudate. The MP-infected group manifested symptoms indicative of respiratory infection, including erect hair, oral and nasal secretions, and a decrease in body weight. Furthermore, the pathological score of the MP+CEES group surpassed that of the groups treated with MP or CEES independently. Notably, the MP+CEES group demonstrated significant activation of the VEGFR-3 and PI3K/AKT/mTOR signaling pathways, implying a substantial involvement of lymphatic vessel impairment in this pathology. This study successfully established a mouse model of PB induced by MP using a two-step method. Lymphatic vessel impairment is a pivotal element in the pathogenetic mechanisms underlying this disease entity. This accomplishment will aid in further research into treatment methods for patients with PB caused by MP. [ABSTRACT FROM AUTHOR]

Graphene has attracted much interest in many scientific fields because of its high specific surface area, Young's modulus, fracture strength, carrier mobility and thermal conductivity. In particular, the graphene oxide (GO) prepared by chemical exfoliation of graphite has achieved low-cost and large-scale production and is one of the most promising for Cu matrix composites. Here, we prepared a high strength, high electrical conductivity and high thermal conductivity reduced graphene oxide (RGO)/Cu composite by directly heating the GO/copper formate. The oxygen-containing functional groups and defects of RGO are significantly reduced compared with those of GO. The tensile yield strength and thermal conductivity of RGO/Cu composite with RGO volume fraction of 0.49 vol.% are as high as 553 MPa and 364 W/(m·K) at room temperature, respectively. The theoretical value of the tensile yield strength of the composite is calculated according to the strengthening mechanism, and the result shows that it agrees with the experimental value. After hot-rolling treatment, the ductility and conductivity of the composite materials have been greatly improved, and the ductility of the RGO/Cu composite with RGO volume fraction of 0.49 vol.% has been increased to four times the original. This work provides a highly efficient way to fabricate a high-performance RGO-reinforced Cu composite for commercial application. [ABSTRACT FROM AUTHOR]

Cross-scene classification focuses on setting up an effective domain adaptation (DA) way to transfer the learnable knowledge from source to target domain, which can be reasonably achieved through the pseudo-label propagation procedure. However, it is hard to bridge the objective existing severe domain discrepancy between source and target domains, and thus, there are several unreliable pseudo-labels generated in target domain and involved into pseudo-label propagation procedure, which would lead to unreliable error accumulation to deteriorate the performance of cross-scene classification. Therefore, in this paper, a novel Masked Image Modeling Auxiliary Pseudo-Label Propagation called MIM-AP 2 with clustering central rectification strategy is proposed to improve the quality of pseudo-label propagation for cross-scene classification. First, in order to gracefully bridge the domain discrepancy and improve DA representation ability in-domain, a supervised class-token contrastive learning is designed to find the more consistent contextual clues to achieve knowledge transfer learning from source to target domain. At the same time, it is also incorporated with a self-supervised MIM mechanism according to a low random masking ratio to capture domain-specific information for improving the discriminability in-domain, which can lay a solid foundation for high-quality pseudo-label generation. Second, aiming to alleviate the impact of unreliable error accumulation, a clustering central rectification strategy is designed to adaptively update robustness clustering central representations to assist in rectifying unreliable pseudo-labels and learning a superior target domain specific classifier for cross-scene classification. Finally, extensive experiments are conducted on six cross-scene classification benchmarks, and the results are superior to other DA methods. The average accuracy reached 95.79%, which represents a 21.87% improvement over the baseline. This demonstrates that the proposed MIM-AP 2 can provide significantly improved performance. [ABSTRACT FROM AUTHOR]

High-aspect-ratio microholes, the fundamental building blocks for microfluidics, optical waveguides, and other devices, find wide applications in aerospace, biomedical, and photonics fields. Yttrium aluminum garnet (YAG) crystals are commonly used in optical devices due to their low stress, hardness, and excellent chemical stability. Therefore, finding efficient fabrication methods to produce high-quality microholes within YAG crystals is crucial. The Bessel beam, characterized by a uniform energy distribution along its axis and an ultra-long depth of focus, is highly suitable for creating high-aspect-ratio structures. In this study, an axicon lens was used to shape the spatial profile of a femtosecond laser into a Bessel beam. Experimental verification showed a significant improvement in the high aspect ratio of the microholes produced in YAG crystals using the femtosecond Bessel beam. This study investigated the effects of the power and defocus parameters of single-pulse Bessel beams on microhole morphology and size, and microhole units with a maximum aspect ratio of more than 384:1 were obtained. Based on these findings, single-pulse femtosecond Bessel processing parameters were optimized, and an array of 181 × 181 microholes in a 400 μm thick YAG crystal was created in approximately 13.5 min. The microhole array had a periodicity of 5 μm and a unit aspect ratio of 315:1, with near-circular top and subface apertures and high repeatability. [ABSTRACT FROM AUTHOR]

Waterborne polyurethane, renowned for its lightweight properties, excellent insulation capabilities, and corrosion resistance, has found extensive application in fields such as construction, automotive, leather, and thermal insulation. Nevertheless, during operational usage, waterborne polyurethane materials, akin to other polymeric substances, are susceptible to oxidative aging manifestations like yellowing, cracking, and diminished mechanical performance, significantly curtailing their utility. Consequently, the synthesis of yellowing-resistant polyurethane assumes pivotal significance. This study integrates dynamic reversible reactions into the synthesis process of polyurethane by introducing the dynamic reversible compound 2-hydroxyethyl disulfide as a chain extender, alongside the incorporation of a UV absorber to enhance the polyurethane's resistance to yellowing. When the disulfide bonds absorb heat, they undergo cleavage, yielding thiols that spontaneously recombine into disulfide bonds at ambient temperatures, allowing for the continuous breaking and reformation of disulfide bonds to absorb heat. Concurrently, in collaboration with the UV absorber, the detrimental effects of ultraviolet radiation on the polyurethane material are mitigated, thereby augmenting its resistance to yellowing. This study scrutinizes the positioning of UV absorber addition, the quantity of UV absorber, and the molar ratio of 1,4-butanediol to 2-hydroxyethyl disulfide, characterizing the functional groups of polyurethane through infrared and Raman spectroscopy. It is observed that the successful preparation of yellowing-resistant polyurethane is achieved, and evaluations on the modified polyurethane through color difference, tensile, and centrifugal tests reveal that the optimal yellowing resistance is attained by adding a UV absorber at a mass fraction of 1% to 3% prior to chain extension, resulting in a color change grade of 2, denoting slight discoloration. Simultaneously, the other properties of polyurethane exhibit relative stability. Notably, when the molar ratio of 1,4-butanediol to 2-hydroxyethyl disulfide is 3:2, the overall performance of the polyurethane remains stable, with exceptional yellowing resistance capabilities attaining a color change grade of 2. [ABSTRACT FROM AUTHOR]

Although the effect of campus landscape space on stress relief among college students has been confirmed, few existing studies have considered the impact on stress recovery from the perspective of factor combination, and the key visual elements and the most effective combination of visual elements to relieve stress are still unclear. This study attempts to conduct a natural experiment within Chinese campuses, measuring physiological indicators of stress such as heart rate (HR), frequency domain index of heart rate variability (LF/HF), skin conductance level (SCL), skin temperature (SKT), and respiratory rate (RESP) using physiological instruments. It explored the effects of visual elements and their combinations in campus landscape spaces on short-term stress relief among college students through semantic segmentation, multifactorial analysis of variance, and post hoc multiple comparison methods. Research results demonstrate that the presence of water elements in the field of vision can effectively improve the stress relief effects of landscape spaces. Reasonable combinations of natural landscape elements and artificial landscape elements in the design can also effectively promote stress relief among students. Building facade area and sky area, water area and sky area, and plant species and pavement area are three combinations of factors with the strongest interactive effects. "Natural water scenery" and "exquisite artificial" are two campus landscape design patterns most conducive to short-term stress relief. [ABSTRACT FROM AUTHOR]

To solve the problem of the insufficient driving force and low adoption rate of conservation tillage adoption and to enhance the effect of industrial organization in influencing technology diffusion, this paper explored the relationship and the mechanism of perceived organizational support and inter-temporal choice in the adoption of conservation tillage by using micro-research data from 725 melon farmers in the Shaanxi and Shanxi provinces in China and by applying the experimental economics method to obtain the inter-temporal choices of the farmers. This paper also analyzed farmers' risk preferences' moderating effect on the relationship between inter-temporal choice and conservation tillage. Additionally, it examined the impact of perceived organizational support on the differentiation of different conservation tillage technologies. The study found that perceived organizational support significantly contributes to adopting zero tillage and minimum tillage, and water-saving irrigation. Perceived organizational support was not conducive to farmers' adoption of furrow and ridge tillage. The impact of perceived organizational support on technology adoption is heterogeneous, depending on the differences in the size of the family's cultivated land. The inter-temporal choice of farmers significantly impedes the adoption of conservation tillage. The increase in risk preference helps alleviate the hindering effect of inter-temporal choice on farmers' adoption of conservation tillage. Perceived organizational support can promote the adoption of conservation tillage by reducing farmers' inter-temporal choices. Inter-temporal choice is an essential mechanism by which perceived organizational support affects the adoption of conservation tillage. Compared with the existing studies, this paper incorporates the technology-attribute-induced inter-temporal choice of farmers into the impact analysis framework and considers the relationship between perceived organizational support, inter-temporal choice, and the adoption of conservation tillage and the mechanism of its action. The findings of the study provide a theoretical basis for the enrichment of incentive mechanisms for the adoption of conservation tillage, which is of great significance for the improvement of the tool for the integration of small farmers in developing countries into the industrial activities of the new agricultural business central bodies and for promoting the diffusion of conservation tillage in agriculture. [ABSTRACT FROM AUTHOR]

The impact of COVID-19 has boosted growth in the takeaway and medical industries but has also generated a large amount of plastic waste. Peanut shells (PS) are produced in large quantities and are challenging to recycle in China. Co-pyrolysis of peanut shells (PS) and polypropylene (PP) is an effective method for processing plastic waste and energy mitigation. Thermogravimetric analysis was conducted on PS, PP, and their blends (PS-PP) at different heating rates (10, 20, 30 °C·min−1). The results illustrated that the co-pyrolysis process of PS-PP was divided into two distinct decomposition stages. The first stage (170–400 °C) was predominantly linked to PS decomposition. The second stage (400–520 °C) resulted from the combinations of PS and PP's thermal degradations, with the most contribution from PP degradation. With the increase in heating rate, thermogravimetric hysteresis appeared. Kinetic analysis indicated that the co-pyrolysis process reduced the individual pyrolysis activation energy, especially in the second stage, with a correlation coefficient (R2) generally maintained above 0.95. The multi-level reaction mechanism function model can effectively reveal the co-pyrolysis process mechanism. PS proved to be high-quality biomass for co-pyrolysis with PP, and all mixtures exhibited synergistic effects at a mixing ratio of 1:1 (PS1-PP1). This study accomplished effective waste utilization and optimized energy consumption. It holds significance in determining the interaction mechanism of mixed samples in the co-pyrolysis process. [ABSTRACT FROM AUTHOR]

Simple Summary: Cas9 is limited by protospacer adjacent motif (PAM) sequences during the application process, which is particularly evident in insect genome editing. Researchers have discovered Cas9 variants with a wider range of recognition due to the development of genome-editing technology. However, the application of these variants in insects has been ineffective and time-consuming. To tackle this issue, this study established a high-throughput assay system capable of rapidly detecting recognizable PAM sequences of different Cas9 variants in Bombyx mori and the corresponding editing efficiency of the sites. We utilized this system to evaluate the editing ability of two protein variants, xCas9 and Cas9-NG, in Bombyx mori cells. Based on the editing ability of these two proteins, the editable range of the Bombyx mori genome can be greatly expanded, accelerating research on the genome's function. This system is also applicable to other insects for detecting the editing ability of Cas9 variants, thus accelerating the study of silkworm genome function. Genome editing provides novel opportunities for the precise genome engineering of diverse organisms. Significant progress has been made in the development of genome-editing tools for Bombyx mori (B. mori) in recent years. Among these, CRISPR/Cas9, which is currently the most commonly used system in lepidopteran insects, recognizes NGG protospacer adjacent motif (PAM) sequences within the target locus. However, Cas9 lacks the ability to target all gene loci in B. mori, indicating the need for Cas9 variants with a larger editing range. In this study, we developed a high-throughput screening platform to validate Cas9 variants at all possible recognizable and editable PAM sites for target sequences in B. mori. This platform enabled us to identify PAM sites that can be recognized by both xCas9 3.7 and SpCas9-NG variants in B. mori and to assess their editing efficiency. Cas9 shows PAM sites every 13 base pairs in the genome, whereas xCas9 3.7 and SpCas9-NG have an average distance of 3.4 and 3.6 base pairs, respectively, between two specific targeting sites. Combining the two Cas9 variants could significantly expand the targeting range of the genome, accelerate research on the B. mori genome, and extend the high-throughput rapid screening platform to other insects, particularly those lacking suitable NGG PAM sequences. [ABSTRACT FROM AUTHOR]

Wind profiling within operating wind farms is important for both wind resource assessment and wind power prediction. With increasing wind turbine size, it is getting difficult to obtain wind profiles covering the turbine-affecting area due to the limited height of wind towers. In this study, a stepwise quality control and optimizing process for deriving high-quality near-surface wind profiles within wind farms is proposed. The method is based on the radial wind speed obtained by the Doppler Wind Lidar velocity-azimuth display (VAD) technique. The method is used to obtain the whole wind profile from ground level to the height affected by wind turbines within a utility-scale onshore wind farm, in northern China. Compared with the traditional carrier-to-noise ratio (CNR) filter-based quality control method, the proposed data processing method can significantly improve the accuracy of the derived wind. For a 10 m wind speed, an increase in coefficient of determination (R2) from 0.826 to 0.932, and a decrease in mean absolute error (MAE) from 1.231% to 0.927% are obtained; while for 70 m wind speed, R2 increased from 0.926 to 0.958, and MAE decreased from 1.023% to 0.771%. For wind direction, R2 increased from 0.978 to 0.992 at 10 m, and increased from 0.983 to 0.995 at 70 m. The optimized method also presents advantages in improving the accuracy of derived wind under complex wind environments, e.g., inside a wind farm, and increasing the data availability during clear nights. The proposed method could be used to derive wind profiles from below the minimum range of a vertically operating scanning Doppler Lidar to a height affected by wind turbines. Combined with Doppler beam-swinging (DBS) scanning data, the method could be used to obtain the complete wind profile in the boundary layer. These wind profiles could be further used to predict wind power and evaluate the climate and environmental effects of wind farms. [ABSTRACT FROM AUTHOR]

In order to study the characteristics of P-wave velocity and resistivity of loess with different moisture contents, low-field nuclear magnetic resonance, resistivity, and P-wave velocity tests were carried out on loess samples with 11 different moisture contents. The test results show that under the condition of the same dry density, the water in loess exists in two forms: bound water and free water. With the increase in moisture content, the water porosity of loess increases, the proportion of free water increases, and the resistivity gradually decreases and then tends to be stable, showing a power function relationship with moisture content. When the moisture content is less than 20%, the P-wave velocity decreases with the increase in the moisture content. In comparison, when the moisture content is greater than 20%, the wave velocity increases with the increase in the moisture content. A modified relation between wave velocity and moisture content and saturation is put forward, and the relationship expression between wave velocity and resistivity of loess is established. Finally, the reliability is verified by experimental data. The research results have a certain guiding significance for real-time monitoring of loess moisture content and engineering stability analysis in the loess area. [ABSTRACT FROM AUTHOR]

Aqueous zinc ion batteries (AZIBs) have emerged as a promising battery technology due to their excellent safety, high capacity, low cost, and eco-friendliness. However, the cycle life of AZIBs is limited by severe side reactions and zinc dendrite growth on the zinc electrode surface, hindering large-scale application. Here, an electrolyte optimization strategy utilizing the simplest dipeptide glycylglycine (Gly-Gly) additive is first proposed. Theoretical calculations and spectral analysis revealed that, due to the strong interaction between the amino group and Zn atoms, Gly-Gly preferentially adsorbs on zinc's surface, constructing a stable and adaptive interfacial layer that inhibits zinc side reactions and dendrite growth. Furthermore, Gly-Gly can regulate zinc ion solvation, leading to a deposition mode shift from dendritic to lamellar and limiting two-dimensional dendrite diffusion. The symmetric cell with the addition of a 20 g/L Gly-Gly additive exhibits a cycle life of up to 1100 h. Under a high current density of 10 mA cm−2, a cycle life of 750 cycles further demonstrates the reliable adaptability of the interfacial layer. This work highlights the potential of Gly-Gly as a promising solution for improving the performance of AZIBs. [ABSTRACT FROM AUTHOR]

The advent of intelligent technologies, notably Brain–Computer Interfaces (BCIs), has introduced novel privacy dilemmas. Ensuring judicious privacy transfer is imperative for the application of BCI technology and pivotal for fostering economic and technological progress. This study adopts privacy transfer as the research perspective and employs an ethical matrix as the research method. It establishes BCI users as the central core interests, with marketers, developers, and medical personnel as stakeholders. Departing from the binary opposition of public and private in traditional privacy theory, this article proposes ethical principles such as maximizing benefits, minimizing harm, and respecting independent decision-making power. It constructs a judgment matrix for the privacy transfer of BCIs, utilizing this matrix to identify ethical risks like privacy disclosure and hijacking. This study analyzes the reasons for risks, aiming to overcome dilemmas and construct an ethical matrix to explore privacy transfer boundary division methods suitable for BCI technology and tailored to different stakeholders. [ABSTRACT FROM AUTHOR]

Fungal infection is initiated by the adhesion of pathogens to biotic and abiotic surfaces, with various manifestations including biofilm formation and invasive growth, etc. A previous report, though devoid of functional data, speculated that the Schizosaccharomyces pombe glycoprotein SPBPJ4664.02 could be the homology of Saccharomyces cerevisiae Flo11. Here, our studies with S. pombe substantiated the previously proposed speculation by (1) the deletion of SPBPJ4664.02 attenuated biofilm formation and invasive growth in S. pombe; (2) the S. pombe's lack of SPBPJ4664.02 could be complemented by expressing S. cerevisiae flo11. Furthermore, indole-3-acetic acid (IAA) and dodecanol were examined in S. pombe for their respective effects on biofilm formation. IAA and dodecanol at high concentrations could inhibit biofilm formation, whereas opposing effects were observed with low concentrations of these molecules. Mechanism studies with the SPBPJ4664.02Δ and SPBPJ4664.02Δ/flo11OE versus the wild type have demonstrated that IAA or dodecanol might exert regulatory effects downstream of SPBPJ4664.02 in the signaling pathway for biofilm formation. Moreover, our research extrapolated to Candida albicans has pinpointed that IAA inhibited biofilm formation at high concentrations, consistent with the transcriptional downregulation of the biofilm-related genes. Dodecanol suppressed C. albicans biofilm formation at all the concentrations tested, in accord with the downregulation of biofilm-related transcripts. [ABSTRACT FROM AUTHOR]

Proton exchange membrane fuel cell (PEMFC) is significant and favorable to the long-range and short refueling time in the vehicle industry. However, the non-uniform distribution of gas flow supply, particularly in the fuel cell stack is neglected in the electrochemical model for PEMFC performance optimization. The purpose of this study is to break through this limitation to establish an optimized electrochemical fuel cell performance model, with porous media methods considering the non-uniform gas flow distribution in fuel cell stack with different compression of the gas distribution layer (GDL). The numerical models are validated by experimentation of a practical fuel cell stack. For the established fuel cell model, there is a 5% difference between the maximum and minimum speeds of various flow channels in the anode flow field under 10% GDL compression. Furthermore, the single-channel electrochemical performance model is optimized by considering the non-uniform gas flow distribution of the fuel cell stack. The results of the optimized electrochemical fuel cell performance model demonstrate that the correlation coefficient between the experiment results and the simulation results is nearly 99.50%, which is higher than that of the original model under 20% GDL compression. This established model is effective in enhancing the prediction accuracy of the PEMFC performance. [ABSTRACT FROM AUTHOR]

The supergiant Shuangjianzishan (SJS) Ag–Pb–Zn deposit, located in the southern Great Xing'an Range (SGXR), is the largest Ag deposit in China. The SJS deposit can be divided into two ore blocks: the Shuangjianzishan ore block and the Xinglongshan ore block. Given the importance of the Xinglongshan ore block in the SJS deposit, our work is focused on the Xinglongshan ore block. The vein orebodies in the Xionglongshan ore block mainly occur in the NW-, NNW-, and NNE-trending fault zones, and its mineralization is mainly related to a deep concealed syenogranite. Here, we present new geochronology, isotope geochemistry, and fluid inclusion data for the Xinglongshan ore block and provide additional insights into the metallogenic mechanism of the deposit. The dating results show that the syenogranite related to the mineralization formed at approximately 137 Ma, which is coherent with some previous age determinations in sulfides from the ore deposit. The mineralization of the Xinglongshan ore block can be divided into four stages: sphalerite–arsenopyrite–pyrite–chalcopyrite–quartz stage (stage I), sphalerite–galena–pyrite–silver-bearing mineral–quartz stage (stage II), sphalerite–galena–silver-bearing mineral–quartz–calcite stage (stage III), and weakly mineralized quartz–calcite stage (stage IV). Four types of fluid inclusions (FIs) have been identified within quartz and calcite veins: liquid-rich, gas-rich, pure-liquid, and pure-gas FIs. The homogenization temperatures in the four stages exhibit a gradual decrease, with stage I ranging from 253 to 302 °C, stage II from 203 to 268 °C, stage III from 184 to 222 °C, and stage IV from 153 to 198 °C, respectively. The salinity for stages I, II, III, and IV falls within the ranges of 3.4–6.6 wt% NaCl eqv., 2.6–7.2 wt% NaCl eqv., 2.9–7.0 wt% NaCl eqv., and 1.2–4.8 wt% NaCl eqv., respectively, indicative of a low-salinity ore-forming fluid. The δ18Owater and δD values of the ore-forming fluid span from −13.9‰ to 7.4‰ and −145‰ to −65‰, with δ13CV-PDB values between −11.0‰ and −7.9‰. These values suggest that the ore-forming fluid predominantly originated from a mixture of magmatic and meteoric water. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios of sulfides range from 18.278 to 18.361, 15.530 to 15.634, and 38.107 to 38.448, respectively. These ratios imply that the ore-forming material was primarily derived from the Early Cretaceous granitic magma, which resulted from the mixing of depleted mantle- and crustal-derived magmas. The fluid mixing was the dominant mechanism for mineral precipitation. The Xinglongshan ore block belongs to a magmatic-hydrothermal vein-type deposit related to the Early Cretaceous syenogranite, and the Shuangjianzishan ore block belongs to an intermediate sulfidation epithermal deposit related to coeval subvolcanic rocks. The Ag–Pb–Zn mineralization at Shuangjianzishan is genetically related to the Early Cretaceous volcanic–intrusive complex. [ABSTRACT FROM AUTHOR]

The escalating frequency and severity of extreme climate greatly impact the carbon dynamics of terrestrial ecosystems worldwide. To understand the multi-temporal response of net ecosystem productivity (NEP) to extreme climate, we investigated 11 temperature and precipitation extreme indices across different vegetation types in China. From 1981 to 2019, the results showed that NEP in China increased at a rate of 0.64 g·m−2·a−2. Extreme climate demonstrated a significant warming trend and a non-significant moistening trend; specifically, maximum daily minimum temperature (TNx) exhibited a significant increase at a rate of 0.34 °C/10 a, while maximum 5-day precipitation (Rx5day) showed an insignificant increase at a rate of 1.78 mm/10 a. NEP was significantly impacted by extreme temperature at the annual, seasonal, and monthly scales, but moderately impacted by extreme precipitation. Specifically, extreme temperature had the most significant effect on grassland, with minimal influence on cropland. In contrast, extreme precipitation had the most significant effect on forest, with minimal impact on cropland. Moreover, the lagged time for extreme precipitation was longer than that for extreme temperature. Extreme precipitation exhibited a corresponding lagged time of at least 2 months (p < 0.01), while extreme temperature exhibited a lagged time of at least 1 month (p < 0.01). The maximum lag time observed was 4 months (p < 0.01). Our findings provide valuable insights into the multi-temporal response of NEP to extreme climate in China and inform sustainable development practices in the region. [ABSTRACT FROM AUTHOR]