Search

Castings' surface-defect detection is a crucial machine vision-based automation technology. This paper proposes a fusion-enhanced attention mechanism and efficient self-architecture lightweight YOLO (SLGA-YOLO) to overcome the existing target detection algorithms' poor computational efficiency and low defect-detection accuracy. We used the SlimNeck module to improve the neck module and reduce redundant information interference. The integration of simplified attention module (SimAM) and Large Separable Kernel Attention (LSKA) fusion strengthens the attention mechanism, improving the detection performance, while significantly reducing computational complexity and memory usage. To enhance the generalization ability of the model's feature extraction, we replaced part of the basic convolutional blocks with the self-designed GhostConvML (GCML) module, based on the addition of p2 detection. We also constructed the Alpha-EIoU loss function to accelerate model convergence. The experimental results demonstrate that the enhanced algorithm increases the average detection accuracy (mAP@0.5) by 3% and the average detection accuracy (mAP@0.5:0.95) by 1.6% in the castings' surface defects dataset. [ABSTRACT FROM AUTHOR]

It is difficult to plug the fracture water channeling of a fractured low-permeability reservoir during water flooding by using the conventional acrylamide polymer gel due to its weak mechanical properties. For this problem, micron graphite powder is added to enhance the comprehensive properties of the acrylamide polymer gel, which can improve the plugging effect of fracture water channeling. The chemical principle of this process is that the hydroxyl and carboxyl groups of the layered micron graphite powder can undergo physicochemical interactions with the amide groups of the polyacrylamide molecule chain. As a rigid structure, the graphite powder can support the flexible skeleton of the original polyacrylamide molecule chain. Through the synergy of the rigid and flexible structures, the viscoelasticity, thermal stability, tensile performance, and plugging ability of the new-type gel can be significantly enhanced. Compared with a single acrylamide gel, after adding 3000 mg/L of micrometer-sized graphite powder, the elastic modulus, the viscous modulus, the phase transition temperature, the breakthrough pressure gradient, the elongation at break, and the tensile stress of the acrylamide gel are all greatly improved. After adding the graphite powder to the polyacrylamide gel, the fracture water channeling can be effectively plugged. The characteristics of the networked water flow channel are obvious during the injected water break through the gel in the fracture. The breakthrough pressure of water flooding is high. The experimental results are an attempt to develop a new gel material for the water plugging of a fractured low-permeability reservoir. [ABSTRACT FROM AUTHOR]

Based on the design and measured data of one actual tower, a three-dimensional numerical model for a natural draft dry cooling tower (NDDCT) was created and validated under constant heat load. This enabled the performance improvement mechanism of air equalizing on vertical delta-type radiators (VDRs) to be clarified by detailed analysis of key parameters, such as the exit water temperature, heat transfer coefficient, and mass airflow. Under the impact of typical ambient crosswind, all VDRs were retrofitted with air-side-equalizing devices. It was found that the exit water temperatures of the whole NDDCT decreased by 0.865 °C, 0.593 °C and 0.186 °C under the studied ambient crosswind speeds of 2.5 m/s, 4 m/s and 12 m/s, respectively. The performance improvement mechanism of air-side equalizing was investigated for three VDRs, which were located on the upwind, tower lateral, and downwind sides under crosswind impacts. Besides the studied VDRs, the performance of the neighboring VDRs behind them was also improved by the optimized aerodynamic field and the reduced hot wind recirculation around them. In addition, the average heat transfer coefficients of the VDRs were enhanced, which could lay the foundation for improving the cooling performance of thermodynamic devices with VDRs. [ABSTRACT FROM AUTHOR]

Although nano SiO2 exhibits excellent application potential in the field of oil and gas exploration and development, such as drilling fluid, enhanced oil/gas recovery, etc., it is prone to agglomeration and loses its effectiveness due to the action of cations in saline environments of oil and gas reservoirs. Therefore, it is crucial to study the mechanism of the change in energy between nano SiO2 and cations for its industrial application. In this paper, the effect of cations (Na+, K+, Ca2+, and Mg2+) on the surface energy of nano SiO2 particles is investigated from the perspective of molecular motion and electronic change by density functional theory. The results are as follows: Due to the electrostatic interactions, cations can migrate towards the surface of nano SiO2 particles. During the migration process, monovalent cations are almost unaffected by water molecules, and they can be directly adsorbed on the surface by nano SiO2 particles. However, when divalent cations migrate from a distance to the surface of nano SiO2 particles, they can combine with water molecules to create an energy barrier, which can prevent them from moving forward. When divalent cations break through the energy barrier, the electronic kinetic energy between them and nano SiO2 particles changes more strongly, and the electrons carried by them are more likely to break through the edge of the atomic nucleus and undergo charge exchange with nano SiO2 particles. The change in interaction energy is more intense, which can further disrupt the configuration stability of nano SiO2. The interaction energy between cations and nano SiO2 particles mainly comes from electrostatic energy, followed by Van der Waals energy. From the degree of influence of four cations on nano SiO2 particles, the order from small to large is as follows: K+ < Na+ < Mg2+ < Ca2+. The research results can provide a theoretical understanding of the interaction between nano SiO2 particles and cations during the application of nano SiO2 in the field of oil and gas exploration and development. [ABSTRACT FROM AUTHOR]

According to their resource ownership and resource acquisition channels, this paper constructs an evolutionary game model of enterprises' technological innovation investment channels considering managers' expectations. This results in the strategy of non-alliance firms along the first channel having a significant impact on the evolutionary equilibrium. For non-alliance enterprises, the difference in the amount of investment in the R&D stage has the same impact on the probability of such enterprises following the first channel. The number of active managers, group capacity, the difference in managers' expectations, and the difference in the amount of technological innovation investment in the R&D stage have significant differences in the possibility of choosing the first channel between the two types of enterprises. The research conclusions can provide valuable references for enterprises to make technological innovation decisions. [ABSTRACT FROM AUTHOR]