Search

This document is a guest editorial from the journal IET Generation, Transmission & Distribution. It discusses the use of artificial intelligence (AI) in reliable forecasting for energy sectors. The editorial highlights the challenges of integrating renewable energy sources and fluctuating electricity demand, and emphasizes the importance of accurate forecasting for system operators. The document also provides summaries of several papers included in a special issue on AI-empowered forecasting in energy sectors, covering topics such as load forecasting, wind power prediction, and control parameter optimization. The editorial concludes by recommending further research and practical implementations of AI approaches in the energy sectors. [Extracted from the article]

Recently, deep learning (DL) based dynamic security assessment (DSA) methods have been very successful. However, although a DSA model can be trained well for a specific topology, it often does not perform well for other topologies. Since the topology in real‐world power systems is frequently changing, the performance reduction of DL‐based DSA methods is very serious, which is a challenging and urgent problem. This paper proposes a novel DSA method based on a convolutional neural network (CNN) to solve this problem. In the proposed method, a strong yet simple domain adaptation approach named adaptive batch normalization (AdaBN) is used, which significantly enhances the extensibility and generalizability of the DSA model when the topology changes and eliminates the need to train a large number of models. This approach achieves a deep adaptation effect by modulating the statistics from the source domain to the target domain in all batch normalization layers across the model. Unlike other domain adaptation methods, this method is parameter‐free, requires no additional components, and has advanced performance despite its simplicity. In addition, this paper introduces TGAN‐based data augmentation to deal with the difficulty of costly data collection and labelling. This data augmentation makes the proposed model applicable to small databases. The test results of the proposed method on IEEE 39‐bus and IEEE 118‐bus systems show that this method can evaluate system dynamic security during topology changes and in the face of data noise with high accuracy. [ABSTRACT FROM AUTHOR]

Convolutional neural networks (CNNs) have been widely used in satellite remote sensing. However, satellites in orbit with limited resources and power consumption cannot meet the storage and computing power requirements of current million‐scale artificial intelligence models. This paper proposes a new generation of high flexibility and intelligent CNNs hardware accelerator for satellite remote sensing in order to make its computing carrier more lightweight and efficient. A data quantization scheme for INT16 or INT8 is designed based on the idea of dynamic fixed point numbers and is applied to different scenarios. The operation mode of the systolic array is divided into channel blocks, and the calculation method is optimized to increase the utilization of on‐chip computing resources and enhance the calculation efficiency. An RTL‐level CNNs field programable gate arrays accelerator with microinstruction sequence scheduling data flow is then designed. The hardware framework is built upon the Xilinx VC709. The results show that, under INT16 or INT8 precision, the system achieves remarkable throughput in most convolutional layers of the network, with an average performance of 153.14 giga operations per second (GOPS) or 301.52 GOPS, which is close to the system's peak performance, taking full advantage of the platform's parallel computing capabilities. [ABSTRACT FROM AUTHOR]

Eye health has become a global health concern and attracted broad attention. Over the years, researchers have proposed many state‐of‐the‐art convolutional neural networks (CNNs) to assist ophthalmologists in diagnosing ocular diseases efficiently and precisely. However, most existing methods were dedicated to constructing sophisticated CNNs, inevitably ignoring the trade‐off between performance and model complexity. To alleviate this paradox, this paper proposes a lightweight yet efficient network architecture, mixed‐decomposed convolutional network (MDNet), to recognise ocular diseases. In MDNet, we introduce a novel mixed‐decomposed depthwise convolution method, which takes advantage of depthwise convolution and depthwise dilated convolution operations to capture low‐resolution and high‐resolution patterns by using fewer computations and fewer parameters. We conduct extensive experiments on the clinical anterior segment optical coherence tomography (AS‐OCT), LAG, University of California San Diego, and CIFAR‐100 datasets. The results show our MDNet achieves a better trade‐off between the performance and model complexity than efficient CNNs including MobileNets and MixNets. Specifically, our MDNet outperforms MobileNets by 2.5% of accuracy by using 22% fewer parameters and 30% fewer computations on the AS‐OCT dataset. [ABSTRACT FROM AUTHOR]

This paper proposes a recurrent neural network based model to segment and classify multiple combined multiple power quality disturbances (PQDs) from the PQD voltage signal. A modified bi‐directional long short‐term memory (BI‐LSTM) model with two different types of attention mechanisms is developed. Firstly, an attention gate is added to the basic LSTM cell to reduce the training time and focus the memory on important PQD signal part. Secondly, an attention layer is added to the BI‐LSTM to obtain the more important part of the voltage signal by assigning weightage to the output of the BI‐LSTM model. This attention gate applied in the LSTM cells improves effective and decisive key information extraction from future and past states of the PQD signal and the addition of attention layer improves the overall decision capability of the model, saving computation time, and increasing PQD classification accuracy. Finally, a SoftMax classifier is applied to classify the combined PQD signal in 96 different combinations. The proposed BI‐LSTM model with attention gate and attention layer mechanism is compared to different baseline models based on recurrent neural network and convolution neural network (CNN). From the simulation study, it is inferred that with the proposed method, the multiple combined PQD signals are easily segmented from the voltage signal which makes the process of PQD classification more accurate with less computation complexity and in less time as compared to popular signal processing based approaches for which classification of multiple PQDs is computationally difficult. [ABSTRACT FROM AUTHOR]

The increasing level of air pollution caused by the transport sector necessitates countries to adopt Electric Vehicles (EVs). To espouse EVs, the charging infrastructures' location should be optimal to fulfill the mass‐market consumer needs and reduce the governmental expenses. In this work, the placement of two categories of charging infrastructures, specifically Charging Station (CS) and Dynamic Wireless Charging (DWC) infrastructure is planned in Dubai, United Arab Emirates (UAE) as a case study. For this study, Dubai is divided into 14 districts as per its new addressing system, and the allocation of the two types of charging infrastructures is based on the projection of population growth, EVs adoption forecasting, and other factors with the objective of meeting the consumers' needs and minimizing the government's expenditure. The proposal introduces a novel hybrid model for forecasting, integrating the strengths of the Seasonal AutoRegressive Integrated Moving Average with eXogenous regressors (SARIMAX) model for capturing time‐series statistical characteristics, and the deep learning Attention‐based Convolutional Neural Network (ACNN) for modeling nonlinear relationships in time‐series data. The model's effectiveness was validated through comparative analyses against state‐of‐the‐art (SOTA) models on standard benchmarks, showing significant improvements: 29.70% reduction in Mean Absolute Error (MAE), and 19.15% reduction in Root Mean Square Error (RMSE). [ABSTRACT FROM AUTHOR]

Objective: The accurate measurement of Cobb angles is crucial for the effective clinical management of patients with adolescent idiopathic scoliosis (AIS). The Lenke classification system plays a pivotal role in determining the appropriate fusion levels for treatment planning. However, the presence of interobserver variability and time‐intensive procedures presents challenges for clinicians. The purpose of this study is to compare the measurement accuracy of our developed artificial intelligence measurement system for Cobb angles and Lenke classification in AIS patients with manual measurements to validate its feasibility. Methods: An artificial intelligence (AI) system measured the Cobb angle of AIS patients using convolutional neural networks, which identified the vertebral boundaries and sequences, recognized the upper and lower end vertebras, and estimated the Cobb angles of the proximal thoracic, main thoracic, and thoracolumbar/lumbar curves sequentially. Accordingly, the Lenke classifications of scoliosis were divided by oscillogram and defined by the AI system. Furthermore, a man–machine comparison (n = 300) was conducted for senior spine surgeons (n = 2), junior spine surgeons (n = 2), and the AI system for the image measurements of proximal thoracic (PT), main thoracic (MT), thoracolumbar/lumbar (TL/L), thoracic sagittal profile T5–T12, bending views PT, bending views MT, bending views TL/L, the Lenke classification system, the lumbar modifier, and sagittal thoracic alignment. Results: In the AI system, the calculation time for each patient's data was 0.2 s, while the measurement time for each surgeon was 23.6 min. The AI system showed high accuracy in the recognition of the Lenke classification and had high reliability compared to senior doctors (ICC 0.962). Conclusion: The AI system has high reliability for the Lenke classification and is a potential auxiliary tool for spinal surgeons. [ABSTRACT FROM AUTHOR]

Background and Aim: Dental caries is largely preventable, yet an important global health issue. Numerous systematic reviews have summarized the efficacy of artificial intelligence (AI) models for the diagnosis and detection of dental caries. Therefore, this umbrella review aimed to synthesize the results of systematic reviews on the application and effectiveness of AI models in diagnosing and detecting dental caries. Methods: MEDLINE/PubMed, IEEE Explore, Embase, and Cochrane Database of Systematic Reviews were searched to retrieve studies. Two authors independently screened the articles based on eligibility criteria and then, appraised the included articles. The findings are summarized in tabulation form and discussed using the narrative method. Result: A total of 1249 entries were identified out of which 7 were finally included. The most often employed AI algorithms were the multilayer perceptron, support vector machine (SVM), and neural networks. The algorithms were built to perform the segmentation, classification, caries detection, diagnosis, and caries prediction from several sources, including periapical radiographs, panoramic radiographs, smartphone images, bitewing radiographs, near‐infrared light transillumination images, and so forth. Convoluted neural networks (CNN) demonstrated high sensitivity, specificity, and area under the curve in the caries detection, segmentation, and classification tests. Notably, AI in conjunction with periapical and panoramic radiography images yielded better accuracy in detecting and diagnosing dental caries. Conclusion: AI models, especially convolutional neural network (CNN)‐based models, have an enormous amount of potential for accurate, objective dental caries diagnosis and detection. However, ethical considerations and cautious adoption remain critical to its successful integration into routine practice. [ABSTRACT FROM AUTHOR]

Counting animal populations is fundamental to understand ecological processes. Counts make it possible to estimate the size of an animal population at specific points in time, which is essential information for understanding demographic change. However, in the case of large populations, counts are time‐consuming, particularly if carried out manually. Here, we took advantage of convolutional neural networks (CNN) to count the total number of nest‐entrances in 222 photographs covering the largest known Psittaciformes (Aves) colony in the world. We conducted our study at the largest Burrowing Parrot Cyanoliseus patagonus colony, located on a cliff facing the Atlantic Ocean in the vicinity of El Cóndor village, in north‐eastern Patagonia, Argentina. We also aimed to investigate the distribution of nest‐entrances along the cliff with the colony. For this, we used three CNN architectures, U‐Net, ResUnet, and DeepLabv3. The U‐Net architecture showed the best performance, counting a mean of 59,842 Burrowing Parrot nest‐entrances across the colony, with a mean absolute error of 2.7 nest‐entrances over the testing patches, measured as the difference between actual and predicted counts per patch. Compared to a previous study conducted at El Cóndor colony more than 20 years ago, the CNN architectures also detected noteworthy differences in the distribution of the nest‐entrances along the cliff. We show that the strong changes observed in the distribution of nest‐entrances are a measurable effect of a long record of human‐induced disturbance to the Burrowing Parrot colony at El Cóndor. Given the paramount importance of the Burrowing Parrot colony at El Cóndor, which concentrates 71% of the world's population of this species, we advocate that it is imperative to reduce such a degree of disturbance before the parrots reach the limit of their capacity of adaptation. [ABSTRACT FROM AUTHOR]

Background: Prompt histopathological diagnosis with accuracy is required for soft tissue sarcomas (STSs) which are still challenging. In addition, the advances in artificial intelligence (AI) along with the development of pathology slides digitization may empower the demand for the prediction of behavior of STSs. In this article, we explored the application of deep learning for prediction of prognosis from histopathological images in patients with STS. Methods: Our retrospective study included a total of 35 histopathological slides from patients with STS. We trained Inception v3 which is proposed method of convolutional neural network based survivability estimation. F1 score which identify the accuracy and area under the receiver operating characteristic curve (AUC) served as main outcome measures from a 4‐fold validation. Results: The cohort included 35 patients with a mean age of 64 years, and the mean follow‐up period was 34 months (2–66 months). Our deep learning method achieved AUC of 0.974 and an accuracy of 91.9% in predicting overall survival. Concerning with the prediction of metastasis‐free survival, the accuracy was 84.2% with the AUC of 0.852. Conclusion: AI might be used to help pathologists with accurate prognosis prediction. This study could substantially improve the clinical management of patients with STS. [ABSTRACT FROM AUTHOR]

Background: The exceptional capabilities of artificial intelligence (AI) in extracting image information and processing complex models have led to its recognition across various medical fields. With the continuous evolution of AI technologies based on deep learning, particularly the advent of convolutional neural networks (CNNs), AI presents an expanded horizon of applications in lung cancer screening, including lung segmentation, nodule detection, false‐positive reduction, nodule classification, and prognosis. Methodology: This review initially analyzes the current status of AI technologies. It then explores the applications of AI in lung cancer screening, including lung segmentation, nodule detection, and classification, and assesses the potential of AI in enhancing the sensitivity of nodule detection and reducing false‐positive rates. Finally, it addresses the challenges and future directions of AI in lung cancer screening. Results: AI holds substantial prospects in lung cancer screening. It demonstrates significant potential in improving nodule detection sensitivity, reducing false‐positive rates, and classifying nodules, while also showing value in predicting nodule growth and pathological/genetic typing. Conclusions: AI offers a promising supportive approach to lung cancer screening, presenting considerable potential in enhancing nodule detection sensitivity, reducing false‐positive rates, and classifying nodules. However, the universality and interpretability of AI results need further enhancement. Future research should focus on the large‐scale validation of new deep learning‐based algorithms and multi‐center studies to improve the efficacy of AI in lung cancer screening. [ABSTRACT FROM AUTHOR]

Exposure to varied noisy environments impairs the recognition performance of artificial intelligence‐based speech recognition technologies. Degraded‐performance services can be utilized as limited systems that assure good performance in certain environments, but impair the general quality of speech recognition services. This study introduces an audiovisual speech recognition (AVSR) model robust to various noise settings, mimicking human dialogue recognition elements. The model converts word embeddings and log‐Mel spectrograms into feature vectors for audio recognition. A dense spatial–temporal convolutional neural network model extracts features from log‐Mel spectrograms, transformed for visual‐based recognition. This approach exhibits improved aural and visual recognition capabilities. We assess the signal‐to‐noise ratio in nine synthesized noise environments, with the proposed model exhibiting lower average error rates. The error rate for the AVSR model using a three‐feature multi‐fusion method is 1.711%, compared to the general 3.939% rate. This model is applicable in noise‐affected environments owing to its enhanced stability and recognition rate. [ABSTRACT FROM AUTHOR]

The accuracy of initial conditions is an important driver of the forecast skill of numerical weather prediction models. Increases in the quantity of available measurements, particularly high‐resolution remote sensing observational data products from satellites, are valuable inputs for improving those initial condition estimates. However, the traditional data assimilation methods for integrating observations into forecast models are computationally expensive. This makes incorporating dense observations into operational forecast systems challenging, and it is often prohibitively time‐consuming. Additionally, high‐resolution observations often have correlated observation errors which are difficult to estimate and create problems for assimilation systems. As a result, large quantities of data are discarded and not used for state initialization. Using the Lorenz‐96 system for testing, we demonstrate that a simple machine learning method can be trained to assimilate high‐resolution data. Using it to do so improves both initial conditions and forecast accuracy. Compared to using the Ensemble Kalman Filter with high‐resolution observations ignored, our augmented method has an average root‐mean‐squared error reduced by 37%. Ensemble forecasts using initial conditions generated by the augmented method are more accurate and reliable at up to 10 days of forecast lead time. Plain Language Summary: Weather forecasts are highly sensitive to the estimate of the current state of the atmosphere, known as initial conditions. The atmosphere is chaotic, meaning that small errors in this estimate can grow quickly as the forecast model predicts events further into the future. The satellite era has contributed to large improvements in weather forecasts by providing additional data that allow for more accurate estimates of initial conditions. However, current methods for generating initial conditions are computationally time‐consuming, and as a result, large fractions of available measurements are not used for this purpose. In a proof‐of‐concept study using a simplified representation of the atmosphere for testing, we train a machine learning (ML) method to replicate the results of a traditional method. Once trained, ML models are usually very fast. Applying the trained model exclusively to measurements that would otherwise be too time‐consuming to use produces better initial conditions and more accurate forecasts. Key Points: Machine Learning (ML) augmented data assimilation (DA) of high‐resolution observations improves the analysis in a nonlinear dynamical modelExplainable Artificial Intelligence identifies system covariances to guide neural network training for analysis state reproductionShort‐term forecasts from the analysis generated by the ML augmented DA are more accurate and more reliable [ABSTRACT FROM AUTHOR]

Artificial intelligence (AI) represents a rapidly developing field. Its use can improve diagnosis and therapy in many areas of medicine. Despite this enormous progress, many physicians perceive it as a black box and are skeptical about it. This review will present the basics of machine learning. Different classifications of artificial intelligence, such as supervised versus unsupervised and discriminative versus generative AI, are given. Analogies to human intelligence are discussed as far as algorithms are oriented toward it. In the second step, the most common models like random forest, k‐means clustering, convolutional neural network, and transformers will be presented in a way that the underlying idea can be understood. Corresponding medical applications in cardiovascular medicine will be named for all models, respectively. The overview is intended to show that the term artificial intelligence covers a wide range of different concepts. It should help physicians understand the principles of AI to make up one's minds about its application in cardiology. It should also enable them to evaluate results obtained with AI's help critically. [ABSTRACT FROM AUTHOR]