Search

The increasing popularity of wearable electronics has sparked interest in flexible energy harvesters as alternatives to conventional batteries. Flexible magnetoelectric (ME) composites, known for converting ambient magnetic field energy into useable power, are emerging as promising autonomous energy sources for integration into wearable devices. In this study, we prepared flexible (PVDF-AlN)–(NiO–CNF) based ME composites using two different methods: solution-casting and electrospinning techniques. The ME coupling was confirmed by measuring the ferroelectric and magnetic properties of the composite, and it was qualitatively characterized through the ME coupling coefficient. The electrospinning fibers-based ME composite exhibited an optimal value of 10.6 V/cm.Oe, significantly higher than the solution-casting films-based ME composite (1.3 V/cm.Oe) under a 1 kHz AC magnetic field (off-resonance condition). Subsequently, a flexible magneto-mechano-electric (MME) generator was designed using electrospun-derived material, harvesting a sinusoidal wave with a maximum output peak-to-peak voltage of 9.02 V. The generator displayed an optimal DC power density of 97 μW/m2 when exposed to a weak AC magnetic field of 6 Oe at a frequency of 50 Hz. Consequently, it holds great promise as an efficient autonomous power supply for medical sensing and various miniature electronic applications. [ABSTRACT FROM AUTHOR]

Magneto-mechano-electric (MME) generators efficiently harness ubiquitous stray magnetic fields and convert them into electricity, capturing significant attention for powering innumerable wireless sensors. In this study, lead-free 0-3 particulate magnetoelectric (ME) nano-composite ceramics, specifically x(Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3)-(1-x)Ni 0.5 Zn 0.5 Fe 2 O 4 [x(BCT-BZT)–(1-x)NZFO], were synthesized using the sol-gel method. Subsequently, a flexible MME generator was designed, incorporating the optimized ME composite. Structural parameter calculations indicated higher tetragonal distortion of 0.4% in 0.4(BCT-BZT)-0.6NZFO, possibly due to uniform particulate distribution. The ME composites displayed uniform dual-phase microstructures, with 0.4(BCT-BZT)-0.6NZFO showing a higher NZFO concentration. The maximum values of the magnetodielectric (MD) and ME coupling coefficients have been determined to be -3.6% and 2.55 mV cm -1 Oe-1, respectively, for an x = 0.4 composite. The MME generator is designed using an optimized 0.4(BCT-BZT)-0.6NZFO ME composite with film thickness of 34 μm. This MME generator harvests a sinusoidal wave with a maximum output peak-to-peak voltage of 4.1 V when exposed to a weak AC magnetic field of 10 Oe at a frequency of 50 Hz. Additionally, the device demonstrates an exceptional optimal DC power density of 3.89 μW cm-3. The lead-free 0-3 particulate ME composite enables effective magnetic energy harnessing. As a result, it holds great promise as an efficient autonomous power supply for various Internet of Things based applications. [ABSTRACT FROM AUTHOR]

Magneto-mechano-electric (MME) generators efficiently harness ubiquitous stray magnetic fields and convert them into electricity, capturing significant attention for powering innumerable wireless sensors. In this study, lead-free 0-3 particulate magnetoelectric (ME) nano-composite ceramics, specifically x(Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3)-(1-x)Ni 0.5 Zn 0.5 Fe 2 O 4 [x(BCT-BZT)–(1-x)NZFO], were synthesized using the sol-gel method. Subsequently, a flexible MME generator was designed, incorporating the optimized ME composite. Structural parameter calculations indicated higher tetragonal distortion of 0.4% in 0.4(BCT-BZT)-0.6NZFO, possibly due to uniform particulate distribution. The ME composites displayed uniform dual-phase microstructures, with 0.4(BCT-BZT)-0.6NZFO showing a higher NZFO concentration. The maximum values of the magnetodielectric (MD) and ME coupling coefficients have been determined to be -3.6% and 2.55 mV cm -1 Oe-1, respectively, for an x = 0.4 composite. The MME generator is designed using an optimized 0.4(BCT-BZT)-0.6NZFO ME composite with film thickness of 34 μm. This MME generator harvests a sinusoidal wave with a maximum output peak-to-peak voltage of 4.1 V when exposed to a weak AC magnetic field of 10 Oe at a frequency of 50 Hz. Additionally, the device demonstrates an exceptional optimal DC power density of 3.89 μW cm-3. The lead-free 0-3 particulate ME composite enables effective magnetic energy harnessing. As a result, it holds great promise as an efficient autonomous power supply for various Internet of Things based applications. [ABSTRACT FROM AUTHOR]