Search

To realize high-energy-density Li metal batteries at low temperatures, a new electrolyte is needed to solve the high-voltage compatibility and fast lithium-ion de-solvation process. A gel polymer electrolyte with a small-molecular-weight polymer is widely investigated by combining the merits of a solid polymer electrolyte (SPE) and liquid electrolyte (LE). Herein, we present a new gel polymer electrolyte (P-DOL) by the lithium difluoro(oxalate)borate (LiDFOB)-initiated polymerization process using 1,3-dioxolane (DOL) as a monomer solvent. The P-DOL presents excellent ionic conductivity (1.12 × 10−4 S cm−1) at −20 °C, with an oxidation potential of 4.8 V. The Li‖LiCoO2 cell stably cycled at 4.3 V under room temperature, with a discharge capacity of 130 mAh g−1 at 0.5 C and a capacity retention rate of 86.4% after 50 cycles. Moreover, a high-Ni-content LiNi0.8Co0.1Mn0.1O2 (NCM811) cell can steadily run for 120 cycles at −20 °C, with a capacity retention of 88.4%. The underlying mechanism of high-voltage compatibility originates from the dense and robust B- and F-rich cathode interface layer (CEI) formed at the cathode interface. Our report will shed light on the real application of Li metal batteries under all-climate conditions in the future. [ABSTRACT FROM AUTHOR]

[Display omitted] The huge Li ion transport resistance through the grain boundaries (GBs) among rigid oxide particles forces the adoption of high-temperature sintering (HTS) process over 1000 °C. Nevertheless, the severe side reactions and uncontrollable lithium loss are always companied during the high-cost HTS process, which slows down the pace of oxide solid electrolyte (OSE) for practical application and accelerates the exploration of a new OSE sintering process. Herein, a near-room-temperature (60 °C) cold-sintering process is proposed by filling the GBs with a low-melting-point plastic crystal electrolyte (PCE). Due to the soft property and high-ionic conductivity of PCE, the Li ion transport rate through the GBs is 10 times faster than the bulk phase, endowing the OSE (Li 1.5 Al 0.5 Ge 1.5 (PO 4) 3 chosen as a representative) with a room temperature ionic conductivity of 0.25 mS cm−1. As proof of the concept, the assembled Li symmetrical cells perform a low over-potential of 50 mV with a capacity of 1 mA h cm−2 and full cells delivers a capacity retention of roughly 70% after 820 cycles (1.5 years) at 0.1C. [ABSTRACT FROM AUTHOR]