Search

Novel monitoring architecture approaches are required to detect viticulture diseases early. Existing micro-climate decision support systems can only cope with late detection from empirical and semi-empirical models that provide less accurate results. Such models cannot alleviate precision viticulture planning and pesticide control actions, providing early reconnaissances that may trigger interventions. This paper presents a new plant-level monitoring architecture called thingsAI. The proposed system utilizes low-cost, autonomous, easy-to-install IoT sensors for vine-level monitoring, utilizing the low-power LoRaWAN protocol for sensory measurement acquisition. Facilitated by a distributed cloud architecture and open-source user interfaces, it provides state-of-the-art deep learning inference services and decision support interfaces. This paper also presents a new deep learning detection algorithm based on supervised fuzzy annotation processes, targeting downy mildew disease detection and, therefore, planning early interventions. The authors tested their proposed system and deep learning model on the grape variety of protected designation of origin called debina, cultivated in Zitsa, Greece. From their experimental results, the authors show that their proposed model can detect vine locations and timely breakpoints of mildew occurrences, which farmers can use as input for targeted intervention efforts. [ABSTRACT FROM AUTHOR]

This paper addresses the challenges of calibrating low-cost electrochemical sensor systems for air quality monitoring. The proliferation of pollutants in the atmosphere necessitates efficient monitoring systems, and low-cost sensors offer a promising solution. However, issues such as drift, cross-sensitivity, and inter-unit consistency have raised concerns about their accuracy and reliability. The study explores the following three calibration methods for converting sensor signals to concentration measurements: utilizing manufacturer-provided equations, incorporating machine learning (ML) algorithms, and directly applying ML to voltage signals. Experiments were performed in three urban sites in Greece. High-end instrumentation provided the reference concentrations for training and evaluation of the model. The results reveal that utilizing voltage signals instead of the manufacturer's calibration equations diminishes variability among identical sensors. Moreover, the latter approach enhances calibration efficiency for CO, NO, NO2, and O3 sensors while incorporating voltage signals from all sensors in the ML algorithm, taking advantage of cross-sensitivity to improve calibration performance. The Random Forest ML algorithm is a promising solution for calibrating similar devices for use in urban areas. [ABSTRACT FROM AUTHOR]

The growing availability of smart meter data has facilitated the development of energy-saving services like demand response, personalized energy feedback, and non-intrusive-load-monitoring applications, all of which heavily rely on advanced machine learning algorithms trained on energy consumption datasets. To ensure the accuracy and reliability of these services, real-world smart meter data collection is crucial. The Plegma dataset described in this paper addresses this need bfy providing whole- house aggregate loads and appliance-level consumption measurements at 10-second intervals from 13 different households over a period of one year. It also includes environmental data such as humidity and temperature, building characteristics, demographic information, and user practice routines to enable quantitative as well as qualitative analysis. Plegma is the first high-frequency electricity measurements dataset in Greece, capturing the consumption behavior of people in the Mediterranean area who use devices not commonly included in other datasets, such as AC and electric-water boilers. The dataset comprises 218 million readings from 88 installed meters and sensors. The collected data are available in CSV format. [ABSTRACT FROM AUTHOR]

Copyright of Max-Planck-Institut für Gesellschaftsforschung Discussion Papers is the property of Max Planck Institute for the Study of Societies and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper explores the energy-intensive cement industry, focusing on a plant in Greece and its mill and kiln unit. The data utilized include manipulated, non-manipulated, and uncontrolled variables. The non-manipulated variables are computed based on the machine learning (ML) models and selected by the minimum value of the normalized root mean square error (NRMSE) across nine (9) methods. In case the distribution of the data displayed in the user interface changes, the user should trigger the retrain of the AI models to ensure their accuracy and robustness. To form the objective function, the expert user should define the desired weight for each manipulated or non-manipulated variable through the user interface (UI), along with its corresponding constraints or target value. The user selects the variables involved in the objective function based on the optimization strategy, and the evaluation is based on the comparison of the optimized and the active value of the objective function. The differential evolution (DE) method optimizes the objective function that is formed by the linear combination of the selected variables. The results indicate that using DE improves the operation of both the cement mill and kiln, yielding a lower objective function value compared to the current values. [ABSTRACT FROM AUTHOR]

This "white paper" is a concise perspective of the potential of machine learning in the process systems engineering (PSE) domain, based on a session during FIPSE 5, held in Crete, Greece, June 27–29, 2022. The session included two invited talks and three short contributed presentations followed by extensive discussions. This paper does not intend to provide a comprehensive review on the subject or a detailed exposition of the discussions; instead its aim is to distill the main points of the discussions and talks, and in doing so, highlight open problems and directions for future research. The general conclusion from the session was that machine learning can have a transformational impact on the PSE domain enabling new discoveries and innovations, but research is needed to develop domain-specific techniques for problems in molecular/material design, data analytics, optimization, and control. • A concise perspective is provided on the potential of machine learning in the process systems engineering (PSE) domain. • Machine learning was thought to have a transformational potential enabling new discoveries and innovations. • The need to further develop domain-specific techniques was pointed out. [ABSTRACT FROM AUTHOR]

The study investigates the efficiency of integrating Machine Learning (ML) in clinical practice for diagnosing solitary pulmonary nodules' (SPN) malignancy. Patient data had been recorded in the Department of Nuclear Medicine, University Hospital of Patras, in Greece. A dataset comprising 456 SPN characteristics extracted from CT scans, the SUVmax score from the PET examination, and the ultimate outcome (benign/malignant), determined by patient follow-up or biopsy, was used to build the ML classifier. Two medical experts provided their malignancy likelihood scores, taking into account the patient's clinical condition and without prior knowledge of the true label of the SPN. Incorporating human assessments into ML model training improved diagnostic efficiency by approximately 3%, highlighting the synergistic role of human judgment alongside ML. Under the latter setup, the ML model had an accuracy score of 95.39% (CI 95%: 95.29–95.49%). While ML exhibited swings in probability scores, human readers excelled in discerning ambiguous cases. ML outperformed the best human reader in challenging instances, particularly in SPNs with ambiguous probability grades, showcasing its utility in diagnostic grey zones. The best human reader reached an accuracy of 80% in the grey zone, whilst ML exhibited 89%. The findings underline the collaborative potential of ML and human expertise in enhancing SPN characterization accuracy and confidence, especially in cases where diagnostic certainty is elusive. This study contributes to understanding how integrating ML and human judgement can optimize SPN diagnostic outcomes, ultimately advancing clinical decision-making in PET/CT screenings. [ABSTRACT FROM AUTHOR]

In this work, a set of Feed Forward Neural Networks (FNN) for the estimation of the metal ion concentration of diesel fuels is presented. The dataset vector is obtained through in situ measurements from distillate marine diesel fuel storage tanks all over Greece, in order to reduce the selection bias. It has been demonstrated that the most correlated ions among them are Aluminum (Al), Barium (Ba) and Calcium (Ca). Moreover, the FNN models are the most reliable models to be used for the model construction under discussion. The initial L2 error is relatively small, in the vicinity of 0.3. However, after removing a small dataset that includes 1–2 data points significantly deviating from the model trend, the error is substantially reduced to 0.05, ensuring the reliability and accuracy of the model. If this dataset is cleared, the estimated error is substantially reduced to 0.05, enhancing the reliability and accuracy of the model. The correlation between the sum of the concentrations of the model in relation with the Density and Viscosity are, respectively, 0.15 and 0.29 which are characterized as weak. [ABSTRACT FROM AUTHOR]

Wind energy presents a high growth potential in the EU as an emission reduction strategy and to achieve the climate neutrality goal by 2050. Wind farms suitability analysis is one of the primary goals in the spatial planning of wind energy developments. This research paper introduces a hybrid spatial multicriteria GIS-based framework that combines Analytic Hierarchy Process (AHP), PROMETHEE II and Machine Learning algorithms to determine and predict the most efficient onshore wind farm locations by generating suitability index mappings. The methodology allows to overcome PROMETHEE II limitations in raster driven suitability analysis, utilizing machine learning regression methods as the k Nearest Neighbor and Support Vector Machines to predict a graduating mapping of suitability index for wind farm locations in northeastern Greece. The best configured models presented a RMSE of 0.0344 and 0.0154 respectively, indicating a quite high predictive performance. Suitability results indicate that 56.10 % of the feasible locations in the Thrace area present a positive outranking character for the kNN model and 56.79 % for the SVR model. The proposed framework, enriched by PROMETHEE II capabilities, assists energy and spatial planners in identifying suitable sites for wind farm siting and enables rational decision making that enhances efficient wind energy investments. [ABSTRACT FROM AUTHOR]

The existing digital soil maps are mainly characterized by coarse spatial resolution and are not up to date; thus, they are unable to support the physical process-based models for improved predictions. The overarching objective of this work is oriented toward a data-driven approach and datacube-based tools (Soil Data Cube), leveraging Sentinel-2 imagery data, open access databases, ground truth soil data and Artificial Intelligence (AI) architectures to provide enhanced geospatial layers into the Revised Universal Soil Loss Equation (RUSLE) model, improving both the reliability and the spatial resolution of the final map. The proposed methodology was implemented in the agricultural area of the Imathia Regional Unit (northern Greece), which consists of both mountainous areas and lowlands. Enhanced soil maps of Soil Organic Carbon (SOC) and soil texture were generated at 10 m resolution through a time-series analysis of satellite data and an XGBoost (eXtrene Gradinent Boosting) model. The model was trained by 84 ground truth soil samples (collected from agricultural fields) taking into account also additional environmental covariates (including the digital elevation model and climatic data) and following a Digital Soil Mapping (DSM) approach. The enhanced layers were introduced into the RUSLE's soil erodibility factor (K-factor), producing a soil erosion layer with high spatial resolution. Notable prediction accuracy was achieved by the AI model with R 2 0.61 for SOC and 0.73, 0.67 and 0.63 for clay, sand, and silt, respectively. The average annual soil loss of the unit was found to be 1.76 ton/ha/yr with 6% of the total agricultural area suffering from severe erosion (>11 ton/ha/yr), which was mainly found in the mountainous border regions, showing the strong influence of the mountains in the agricultural fields. The overall methodology could strongly support regional decision making and planning and environmental policies such as the European Common Agricultural Policy (CAP) and the Sustainable Development Goals (SDGs). [ABSTRACT FROM AUTHOR]