435 results
Search Results
2. Announcing the 2022 Best Paper Prize-winners.
- Author
-
Li, Yonglong
- Subjects
SOLAR technology ,PHOTOVOLTAIC power generation ,SOLAR power plants ,CLEAN energy ,MICROGRIDS - Abstract
The article announces the 2022 Clean Energy Best Paper Prizes, recognizing outstanding research including microgrid-based PV/battery/EV systems by Aziz Haffaf, a model for PV power losses by S. Ghosh, and a comparison of PV modules in India by Niranjan Singh Baghel.
- Published
- 2024
- Full Text
- View/download PDF
3. Photovoltaics in agricultural landscapes: "Industrial land use" or a "real compromise" between renewable energy and biodiversity? Perspectives of German nature conservation associations.
- Author
-
Hilker, Janna Marie, Busse, Maria, Müller, Klaus, and Zscheischler, Jana
- Subjects
NATURE conservation ,RENEWABLE energy sources ,LAND use ,AGRICULTURAL landscape management ,AGRICULTURE ,PHOTOVOLTAIC power generation ,BIODIVERSITY - Abstract
Background: One common renewable energy source for substituting fossil sources is photovoltaic (PV) systems. However, installing PV systems in agricultural areas can lead to competition with other land uses. These projects, therefore, often encounter problems with social acceptance in affected communities. Especially from the perspective of nature conservation targets, conflicts can arise. These potential differences are still under-researched but represent important knowledge for the societally broadly accepted design of such facilities and their contribution to energy transformation. In this paper, we investigate the perspectives of nature conservationists on PV in the region of Brandenburg, Germany. We comparatively analyse attitudes towards ground-mounted photovoltaics (GM-PV) and agrophotovoltaics (APV). APV combines energy supply and agricultural production on the same land and could thus be a possible solution for mitigating land-use conflicts. Results: We investigated the degree of local acceptability and positive and negative influencing factors through a qualitative text analysis of ten interviews with local representatives and position papers by Nature Conservation Associations. Our findings show a growing consensus around basic assumptions of the need for renewable energies, the prioritised support for PV systems on rooftops over the installation on agricultural land (GM-PV and APV), and the necessity for PV systems to be compatible with nature conservation objectives. Regarding specific site decisions on agricultural land, we find diverging attitudes when comparing the content of position papers and the responses of interviewees. The interviewees advocate taking into account local interests and specific regional conditions, the effects of PV systems on the local environment, and the need for distributional justice. Large-scale plants are locally less accepted than smaller ones and there is a more open attitude towards the expansion of APV than of GM-PV on agricultural land. However, a range of concerns regarding consequences for landscape and biodiversity persists, and further research and clarification is required to address these issues. Conclusions: We conclude that basic ecological standards and the demands of local stakeholders and interest groups should be taken into account when planning, implementing and reviewing PV projects in the future. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. A Two-Stage Operation Strategy for Energy Storage under Extreme-Heat-with-Low-Wind-Speed Scenarios of a Power System.
- Author
-
Liu, Wenxia, Lin, Zheng, Ma, Rui, He, Xianggang, and Lou, Suhua
- Subjects
PHOTOVOLTAIC power generation ,WIND power ,ENERGY storage ,EXTREME weather ,MONTE Carlo method ,SOLAR energy ,PHOTOVOLTAIC power systems - Abstract
Changes in weather conditions directly impact the output of wind power, photovoltaic systems, and other forms of uncontrollable power generation. During extreme weather events, the output from wind and photovoltaic sources is typically reduced. In light of this, this paper proposes a two-stage operational strategy for energy storage, under scenarios of extreme-heat-with-low-wind-speed, in power systems. Firstly, historical data on wind and solar power, along with weather characteristics, are collected to analyze the power output during multi-day periods of extreme heat and low wind speed. Then, Monte Carlo simulations are employed to generate multi-day load curves with inherent uncertainties, based on regional load characteristics of the power system. Finally, a two-stage operation strategy for energy storage charging and discharging is established. In the first stage, normal operations are conducted to identify periods of power shortage across various types of loads. In the second stage, based on the identified moments of power shortage from the first stage, charging and discharging constraints are applied to the energy storage systems. The feasibility and effectiveness of this two-stage operational strategy are then validated through simulations, using historical data to generate scenarios of multi-day extreme-heat-and-low-wind-speed conditions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. A short-term forecasting method for photovoltaic power generation based on the TCN-ECANet-GRU hybrid model.
- Author
-
Xiang, Xiuli, Li, Xingyu, Zhang, Yaoli, and Hu, Jiang
- Subjects
PHOTOVOLTAIC power generation ,CONVOLUTIONAL neural networks ,TIME series analysis ,STANDARD deviations ,FORECASTING ,REGRESSION analysis - Abstract
Due to the uncertainty of weather conditions and the nonlinearity of high-dimensional data, as well as the need for a continuous and stable power supply to the power system, traditional regression analysis and time series forecasting methods are no longer able to meet the high accuracy requirements of today's PV power forecasting. To significantly improve the prediction accuracy of short-term PV output power, this paper proposes a short-term PV power forecasting method based on a hybrid model of temporal convolutional networks and gated recurrent units with an efficient channel attention network (TCN-ECANet-GRU) using the generated data of an Australian PV power station as the research object. First, temporal convolutional networks (TCNs) are used as spatial feature extraction layers, and an efficient channel attention network (ECANet) is embedded to enhance the feature capture capability of the convolutional network. Then, the GRU is used to extract the timing information for the final prediction. Finally, based on the experimental validation, the TCN-ECANet-GRU method generally outperformed the other baseline models in all four seasons of the year according to three performance assessment metrics: the normalized root mean square error (RMSE), normalized mean absolute error (MAE) and coefficient of determination (R
2 ). The best RMSE, MAE and R2 reached 0.0195, 0.0128 and 99.72%, respectively, with maximum improvements of 11.32%, 8.57% and 0.38%, respectively, over those of the suboptimal model. Therefore, the model proposed in this paper is effective at improving prediction accuracy. Using the proposed method, this paper concludes with multistep predictions of 3, 6, and 9 steps, which also indicates that the proposed method significantly outperforms the other models. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
6. Reliability-Based Model for Incomplete Preventive Replacement Maintenance of Photovoltaic Power Systems.
- Author
-
Wei Chen, Ming Li, Tingting Pei, Cunyu Sun, and Huan Lei
- Subjects
PHOTOVOLTAIC power systems ,POWER plants ,PHOTOVOLTAIC power generation ,CONDITION-based maintenance ,MAINTENANCE costs ,SYSTEMS availability ,RELIABILITY in engineering - Abstract
At present, the operation and maintenance of photovoltaic power generation systems mainly comprise regular maintenance, breakdown maintenance, and condition-based maintenance, which is very likely to lead to over- or under-repair of equipment. Therefore, a preventive maintenance and replacement strategy for PV power generation systems based on reliability as a constraint is proposed. First, a hybrid failure function with a decreasing service age factor and an increasing failure rate factor is introduced to describe the deterioration of PV power generation equipment, and the equipment is replaced when its reliability drops to the replacement threshold in the last cycle. Then, based on the reliability as a constraint, the average maintenance cost and availability of the equipment are considered, and the non-periodic incomplete maintenance model of the PV power generation system is established to obtain the optimal number of repairs, each maintenance cycle and the replacement cycle of the PV power generation system components. Next, the inverter of a PV power plant is used as a research object. The model in this paper is compared and analyzed with the equal cycle maintenance model without considering reliability and the maintenance model without considering the equipment replacement threshold, Through model comparison, when the optimal maintenance strategy is (0.80, 4), the average maintenance cost of this paper's model are decreased by 20.3% and 5.54% and the availability is increased by 0.2395% and 0.0337%, respectively, compared with the equal-cycle maintenance model without considering the reliability constraint and the maintenance model without considering the equipment replacement threshold. Therefore, this maintenance model can ensure the high reliability of PV plant operation while increasing the equipment availability to improve the system economy. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
7. Intelligent clustering-based interval forecasting method for photovoltaic power generation using CNN–LSTM neural network.
- Author
-
Zhu, Honglu, Sun, Yahui, Zhou, Hai, Guan, Yifei, Wang, Nan, and Ma, Wenwen
- Subjects
PHOTOVOLTAIC power generation ,FORECASTING ,BIOCHEMICAL oxygen demand - Abstract
In recent years, the rapid development of photovoltaic (PV) power generation has led to an increased focus on accurate forecasting of PV power output. Interval forecasting, which provides uncertainty measurement information for forecasting results, has become a hot research topic in this field. However, the accuracy of single models or traditional multi-model forecasting methods is often insufficient for meeting the forecasting requirements. In addition, interval forecasting places higher demands on the learning and generalization capabilities of forecasting models. To address these issues, this paper proposes an intelligent multi-model forecasting method based on output features clustering and convolutional neural network–long short term memory (CNN–LSTM) for PV power interval forecasting. First, multiple feature indices are constructed to represent the differences in PV output features for different months. The intelligent clustering method is then employed to achieve the multi-model clustering for forecasting model. Finally, CNN–LSTM is utilized to implement the PV power interval forecasting. The combination of CNN and LSTM effectively improves the modeling accuracy of the intelligent forecasting model. Based on actual data from PV power stations, the method described in this paper narrows down the forecasting interval compared with the single model, reducing prediction interval normalized average width by more than 4%. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
8. Integrating Floating Photovoltaics with Hydroelectricity.
- Author
-
Madeško, Mirsad, Helać, Vahid, Fejzić, Ajdin, Konjicija, Samim, Akšamović, Abdulah, and Grebović, Selma
- Subjects
HYDROELECTRIC power plants ,WATER power ,PHOTOVOLTAIC power systems ,RENEWABLE energy sources ,PHOTOVOLTAIC power generation ,FISH breeding - Abstract
The transition process from fossil fuels to environmentally friendly renewable energy sources carries the risk of creating new environmental damages. Photovoltaic technology represents one of the alternatives with the least risk of harmful environmental impact. However, this technology has two important drawbacks: the significant land occupation for the installation of PV systems and the uncontrollability of production. By constructing floating photovoltaic plants on hydroelectric reservoirs, both of these problems can be reduced to an acceptable level. Some artificial reservoirs, originally built for hydroelectric power plants, have acquired a significant secondary function as recreational areas and fish breeding sites. Therefore, there is justified resistance from the local community to change the existing appearance and purpose of such reservoirs. This paper proposes a completely new concept of integrating the interests of the local community into such objects. In addition to preserving existing uses, the concept also offers new features. This can make the entire system environmentally friendly and sustainable. This paper details the technology behind the construction of floating photovoltaic power plants on artificial reservoirs and emphasizes their various advantages. These benefits include the non-utilization of cultivable land, the ease of assembly and construction, integration into existing power grids, and the potential to address electricity storage issues. For instance, Buško Lake, covering an area of 55.8 km
2 , may host 2.93 km2 of installed floating photovoltaic (FPV) facilities, enabling a total installed capacity of 240 MW. With an average of 5.5 h of daily sunshine, this totals 2007 annual hours, equivalent to a 55 MW thermal power plant. An analysis showed that, with losses of 18.2%, the average annual production stands at 302 G W h , translating to an annual production value of 18 million € at 60 €/MWh. The integration of this production into an existing hydroelectric power plant featuring an artificial reservoir might boost its output by 91%. The available transmission line capacity of 237 MW is shared between the hydroelectric power plant (HPP) and FPV; hence during the FPV maximum power generation time, the HPP halts its production. HPP Orlovac operates a small number of hours annually at full capacity (1489 h); therefore in combination with the FPV, this number can be increased to 2852 h. This integration maintains the lake's functions in tourism and fishing while expanding its capabilities without environmental harm. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
9. Optimal Scheduling of Off-Site Industrial Production in the Context of Distributed Photovoltaics.
- Author
-
Xie, Sizhe, Li, Yao, and Wang, Peng
- Subjects
PARTICLE swarm optimization ,ELECTRIC power consumption ,MICROGRIDS ,SUPPLY & demand ,PRODUCTION scheduling ,POWER resources ,PHOTOVOLTAIC power generation ,BUILDING-integrated photovoltaic systems - Abstract
A reasonable allocation of production schedules and savings in overall electricity costs are crucial for large manufacturing conglomerates. In this study, we develop an optimization model of off-site industrial production scheduling to address the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's power supply, and the difficulty in promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and variations in electricity prices in different places to optimize the scheduling of industrial production in various locations. The model is embedded with two sub-models, i.e., an electricity price prediction model and a distributed photovoltaic power cost model to complete the model parameters, in which the electricity price prediction model utilizes a Long Short-Term Memory (LSTM) neural network. Then, the particle swarm optimization algorithm is used to solve the optimization model. Finally, the production data of two off-site pharmaceutical factories belonging to the same large group of enterprises are substituted into the model for example analysis, and it is concluded that the optimization model can significantly reduce the electricity consumption costs of the enterprises by about 7.9%. This verifies the effectiveness of the optimization model established in this paper in reducing the cost of electricity consumption on the demand side. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
10. Analysis and Modeling of Time Output Characteristics for Distributed Photovoltaic and Energy Storage.
- Author
-
Kaicheng Liu, Chen Liang, Xiaoyang Dong, and Liping Liu
- Subjects
ENERGY storage ,STANDARD deviations ,SHORT-term memory ,PHOTOVOLTAIC power generation ,ELECTRIC power distribution grids - Abstract
Due to the unpredictable output characteristics of distributed photovoltaics, their integration into the grid can lead to voltage fluctuations within the regional power grid. Therefore, the development of spatial-temporal coordination and optimization control methods for distributed photovoltaics and energy storage systems is of utmost importance in various scenarios. This paper approaches the issue from the perspective of spatiotemporal forecasting of distributed photovoltaic (PV) generation and proposes a Temporal Convolutional-Long Short-Term Memory predictionmodel that combines TemporalConvolutionalNetworks (TCN) and Long Short-TermMemory (LSTM). To begin with, an analysis of the spatiotemporal distribution patterns of PV generation is conducted, and outlier data is handled using the 3s rule. Subsequently, a novel approach that combines temporal convolution and LSTM networks is introduced, with TCN extracting spatial features and LSTM capturing temporal features. Finally, a real spatiotemporal dataset fromGansu, China, is established to compare the performance of the proposed network against other models. The results demonstrate that the model presented in this paper exhibits the highest predictive accuracy, with a single-step Mean Absolute Error (MAE) of 1.782 and an average Root Mean Square Error (RMSE) of 3.72 for multi-step predictions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
11. Short-time photovoltaic output prediction method based on depthwise separable convolution Visual Geometry group-deep gate recurrent neural network.
- Author
-
Lei Zhang, Shuang Zhao, Guanchao Zhao, Lingyi Wang, Baolin Liu, Zhimin Na, Zhijian Liu, Zhongming Yu, Wei He, Mrzljak, Vedran, and Ling-Ling Li
- Subjects
RECURRENT neural networks ,SOLAR technology ,ARTIFICIAL neural networks ,ELECTRIC power engineering ,GENERATIVE adversarial networks ,PHOTOVOLTAIC power generation ,PHOTOVOLTAIC power systems - Abstract
In response to the issue of short-term fluctuations in photovoltaic (PV) output due to Cloud movement, this paper proposes a method for forecasting short-term PV output based on a Depthwise Separable Convolution Visual Geometry Group (DSCVGG) and a Deep Gate Recurrent Neural Network (DGN). Initially, a cloud motion prediction model is constructed using a DSCVGG, which achieves edge recognition and motion prediction of clouds by replacing the previous convolution layer of the pooling layer in VGG with a depthwise separable convolution. Subsequently, the output results of the DSCVGG network, along with historical PV output data, are introduced into a Deep Gate Recurrent Unit Network (DGN) to establish a PV output prediction model, thereby achieving precise prediction of PV output. Through experiments on actual data, the Mean Absolute Error (MAE) and Mean Squared Error (MSE) of our model are only 2.18% and 5.32 x 10
-5 , respectively, which validates the effectiveness, accuracy, and superiority of the proposed method. This provides new insights and methods for improving the stability of PV power generation. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
12. Optimal harmonic resonance monitoring in electrical network considering area of harmonic pollution and system uncertainty.
- Author
-
Shakeri, Sina, Koochi, Mohammad Hossein Rezaeian, and Esmaeili, Saeid
- Subjects
PHOTOVOLTAIC power systems ,RENEWABLE energy sources ,UNCERTAIN systems ,HARMONIC analysis (Mathematics) ,RESONANCE ,PHOTOVOLTAIC power generation - Abstract
This paper proposes an optimization approach for allocating power quality monitors (PQMs) aiming to monitor all harmonic resonance conditions while taking power system uncertainties into account. The placement approach utilizes the frequency scan response for calculating impedances over a range of frequencies and consequently determining harmonic resonance conditions. Thereby, it is capable of building binary matrices, which include harmonic resonance conditions. Also, by utilizing the union operator at binary matrices, power system uncertainties such as photovoltaic generation and load level can be considered in the allocation method. The placement approach is expressed as a linear problem that determines the best locations of PQMs and their optimal number so that they monitor all harmonic resonance conditions. Besides, by considering the area of harmonic pollution of non‐linear loads in the proposed method, owners of electrical networks can find a solution with fewer PQMs to monitor harmonic resonance orders inside a particular area of the network. The performance of the presented approach is demonstrated using the 15‐node distribution network and a real electrical network, as well as a real large electrical network in Iran. Results show that the proposed method suggests fewer PQMs to monitor harmonic resonance conditions compared to previous methods. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
13. Short-Term Photovoltaic Power Generation Based on MVMD Feature Extraction and Informer Model.
- Author
-
Xu, Ruilin, Zheng, Jianyong, Mei, Fei, Yang, Xie, Wu, Yue, and Zhang, Heng
- Subjects
ARTIFICIAL neural networks ,PHOTOVOLTAIC power generation ,DEEP learning ,POWER series ,STATISTICAL correlation - Abstract
Photovoltaic (PV) power fluctuates with weather changes, and traditional forecasting methods typically decompose the power itself to study its characteristics, ignoring the impact of multidimensional weather conditions on the power decomposition. Therefore, this paper proposes a short-term PV power generation method based on MVMD (multivariate variational mode decomposition) feature extraction and the Informer model. First, MIC correlation analysis is used to extract weather features most related to PV power. Next, to more comprehensively describe the relationship between PV power and environmental conditions, MVMD is used for time–frequency synchronous analysis of the PV power time series combined with the highest MIC correlation weather data, obtaining frequency-aligned multivariate intrinsic modes. These modes incorporate multidimensional weather factors into the data-decomposition-based forecasting method. Finally, to enhance the model's learning capability, the Informer neural network model is employed in the prediction phase. Based on the input PV IMF time series and associated weather mode components, the Informer prediction model is constructed for training and forecasting. The predicted results of different PV IMF modes are then superimposed to obtain the total PV power generation. Experiments show that this method improves PV power generation accuracy, with an MAPE value of 4.31%, demonstrating good robustness. In terms of computational efficiency, the Informer model's ability to handle long sequences with sparse attention mechanisms reduces training and prediction times by approximately 15%, making it faster than conventional deep learning models. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
14. Voltage control strategy of a high-permeability photovoltaic distribution network based on cluster division.
- Author
-
Li, He, Song, Kun, Meng, Fanyu, Wang, Zhenhao, and Wang, Chaobin
- Subjects
VOLTAGE control ,PHOTOVOLTAIC power generation ,VOLTAGE ,COUPLINGS (Gearing) - Abstract
The use of distributed photovoltaics (PVs) on a large scale often causes voltage over-limit problems in distribution networks. This paper proposes a distributed photovoltaic cluster collaborative optimization voltage control strategy based on an improved community algorithm to address the issue of centralized control being unable to respond quickly to the randomness of distributed photovoltaics and the difficulty of achieving overall coordination with local control. First, by improving the community algorithm, the division of reactive and active clusters, considering the power balance and node coupling degree, is realized. Then, the cluster-coordinated voltage control strategy is proposed by making full use of the power control ability of a photovoltaic inverter. Finally, a voltage regulation ability evaluation index is proposed to assess the node regulation ability within the cluster and select key nodes. This effectively reduces the number of control nodes. The simulation analysis of the improved IEEE 69 distribution network shows that the proposed voltage control strategy can mitigate the issue of voltage over-limit in high-permeability distributed photovoltaic access distribution and enhance the photovoltaic consumption capacity. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
15. Research on Intelligent Scheduling Strategy for Electric Heavy Trucks Considering Photovoltaic Outputs.
- Author
-
Jing, Jiaheng, Mutailipu, Meiheriayi, Wang, Qi, Xiong, Qiang, Huang, Mingyao, and Zhang, Jiuming
- Subjects
PHOTOVOLTAIC power generation ,CLEAN energy ,ELECTRIC charge ,ELECTRIC vehicle charging stations ,ENERGY conservation - Abstract
Due to the extensive use of fossil fuels, energy conservation and sustainable transportation have become hot topics. Electric vehicles (EVs), renowned for their clean and eco-friendly attributes, have garnered considerable global attention and are progressively being embraced worldwide. However, disorganized EV charging not only reduces charging station efficiency but also threatens power grid stability. In this low-carbon era, photovoltaic storage charging stations offer a solution that accommodates future EV growth. However, due to the significant instability in both the charging load and photovoltaic power generation within charging stations, it is critical to maximize local photovoltaic power consumption and minimize the impact of disorganized EV charging on the power grid. This paper formulates an intelligent scheduling strategy for electric heavy trucks within charging stations based on typical photovoltaic output data. The study focuses on a photovoltaic storage charging station in an industrial zone in Xinjiang. While considering the electricity procurement cost of the charging station, the aim is to minimize fluctuations in the electricity procurement load. A simulation analysis was conducted using MATLAB 2021a software, and the results indicated that, compared to an uncoordinated charging strategy for electric heavy trucks, the proposed strategy reduced electricity procurement costs by CNY 1348.25, decreased load fluctuations by 169.45, and improved the utilization efficiency of photovoltaic energy by 30%. A statistical analysis was also used to support the reduction in electricity procurement costs and load variations. Finally, a sensitivity analysis of the weight factors in the objective function was performed, proving that the proposed strategy effectively reduces electricity procurement costs and improves the utilization efficiency of photovoltaic energy. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
16. A Review of Distribution Grid Consumption Strategies Containing Distributed Photovoltaics.
- Author
-
Zhou, Shouhang, Ge, Lijuan, Zheng, Zilong, Wang, Mingyang, and Xu, Zhiwei
- Subjects
MICROGRIDS ,ENERGY storage equipment ,PHOTOVOLTAIC power generation ,ENERGY shortages ,VOLTAGE control ,RENEWABLE energy sources ,ENERGY storage - Abstract
With the growing energy crisis and environmental problems, distributed photovoltaic (PV), as a clean and renewable form of energy, is receiving more and more attention. However, the large-scale access to distributed PV brings a series of challenges to the distribution network, such as voltage fluctuation, frequency deviation, protection coordination, and other problems. In order to solve these problems, this paper provides a research overview of distribution network consumption strategies containing distributed PV. Firstly, this paper introduces the characteristics of distributed PV and its impact on the distribution grid. Then, the difficulties and challenges of distributed PV consumption are analyzed from the technical and economic levels. On this basis, a comprehensive consumption strategy is proposed, including the following aspects: firstly, it is mentioned to optimize the access method of distributed PV and to reduce the impact on the distribution grid by reasonably choosing the access point and access capacity of distributed PV. Secondly, it summarizes the ways to improve the regulation capacity of distribution networks and improve the consumption capacity of distribution networks for distributed PV through the introduction of energy storage equipment, flexible loads, and other means. Finally, advanced control strategies are summarized to improve the stability and reliability of the distribution network by implementing measures such as power prediction, voltage control, and protection coordination for distributed PV. Overall, this paper synthesizes the research on distribution network consumption strategies containing distributed PV from various aspects, which provides certain theoretical guidance and practical reference for solving distributed PV consumption problems. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
17. A multi-objective dispatching model for a novel virtual power plant considering combined heat and power units, carbon recycling utilization, and flexible load response.
- Author
-
Yang, Hailin, Tian, Xu, Liu, Fei, Liu, Liantao, Li, Lixin, Wang, Qian, Yu, Xiaobao, Wang, Hongye, and Yan, China Nie
- Subjects
PHOTOVOLTAIC power generation ,POWER plants ,WIND power plants ,WIND power ,POWER resources ,VALUE at risk ,CARBON emissions ,HEATING - Abstract
To optimize the energy supply potential and complementary advantages of distributed energy, this paper focuses on the dispatching optimization of cogeneration virtual power plant considering uncertainty. First of all, wind power, photovoltaic, combined heat and power (CHP) units, electric boilers, and controllable loads are integrated into a CHP virtual power plant. Then, carbon capture and electric-to-gas devices are introduced to realize carbon recycling. Furthermore, quantify the risk of real-time dispatching of virtual power plants through uncertainty scenario generation and conditional value at risk (CVaR) theory, and the multi-objective stochastic dispatching optimization model of virtual power plants is built with the aim at minimizing the operation cost, carbon emissions, and operation risk as the objectives, and the CRITIC weighting method is adopted to solve it. Finally, the calculation results show that: 1) the electric boiler can use wind and photovoltaic power to supply heat for the system, reduce the dependence ofthe virtual power plant (VPP) on the CHP unit, and make the electric output of the unit more flexible. 2) The risk quantification method proposed can fully measure the risk situation in real-time dispatching, arrange the wind and photovoltaic power generation plan and backup plan more reasonably, and enable the VPP to get more benefits while avoiding the risks in real-time dispatching. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
18. Short-Term Photovoltaic Power Generation Prediction Model Based on Improved Data Decomposition and Time Convolution Network.
- Author
-
Cao, Ranran, Tian, He, Li, Dahua, Feng, Mingwen, and Fan, Huaicong
- Subjects
PHOTOVOLTAIC power generation ,METAHEURISTIC algorithms ,PREDICTION models - Abstract
In response to the volatility of photovoltaic power generation, this paper proposes a short-term photovoltaic power generation prediction model (HWOA-MVMD-TPA-TCN) based on a Hybrid Whale Optimization Algorithm (HWOA), multivariate variational mode decomposition (MVMD), temporal pattern attention mechanism (TPA), and temporal convolutional network (TCN). In order to improve the accuracy of photovoltaic power generation forecasting, HWOA-MVMD is used for data decomposition, the Minimum Mode Overlap Component (MMOC) is used as the objective function, the photovoltaic power generation sequence is decomposed into finite Intrinsic Mode Functions (IMFs) according to the optimal solution, and the training set is formed with key meteorological variable data such as total radiation (unit: W/m
2 ), ambient temperature, and humidity. Then, the TPA-TCN model is used to train the sub-sequences, the final predicted values are obtained after superimposing the reconstruction of the prediction results, and finally the prediction error of the photovoltaic power generation data is studied. The proposed method is applied to real photovoltaic power generation data from a commercial center in Tianjin and is compared with HWOA-MVMD-BiLSTM, GWO-MVMD-TPA-TCN, and TPA-TCN prediction models. The simulation results demonstrate that the MAE value of the forecast method proposed in this paper is 1.95 MW and the RMSE value is 2.55 MW, which can be reduced by up to 33.74% and 38.85%, respectively. The HWOA-MVMD-TPA-TCN-based short-term photovoltaic power generation prediction model presented in this paper achieves higher prediction accuracy and superior performance, serving as a valuable reference for related research. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
19. Distributed Photovoltaic Generation Aggregation Approach Considering Distribution Network Topology.
- Author
-
Tang, Yajie, Sun, Sikai, Zhao, Bo, Ni, Chouwei, Che, Liang, and Li, Junhao
- Subjects
DISTRIBUTED power generation ,HIGH voltages ,TOPOLOGY ,PHOTOVOLTAIC power generation ,VOLTAGE - Abstract
Distributed photovoltaics (DPVs) are widely distributed and the output is random, which brings challenges to the safe operation of the distribution network, so the construction of photovoltaic aggregations can effectively participate in the flexible regulation of the power system. At present, the extraction of DPV clustering features is not sufficient, only considering the output characteristics of PVs. Certain PVs under some nodes may have a more pronounced regulation effect, but they may be ignored in the clustering process. To address the above problems, this paper proposes a DPV aggregation approach considering the distribution network topology. It combines the voltage sensitivity and the power curve and regards them as clustering features to form the DPV aggregation with the highest average voltage sensitivity participating in voltage regulation. The simulation on the IEEE 33-node system verifies that the proposed aggregation approach can select DPV aggregation more suitable for voltage regulation, and make full use of the aggregation to realize the optimal voltage regulation effect. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
20. Real-Time Tracking of Photovoltaics by Differential Absorption Imaging in Optical Wireless Power Transmission.
- Author
-
Asaba, Kaoru and Miyamoto, Tomoyuki
- Subjects
WIRELESS power transmission ,OPTICAL images ,KALMAN filtering ,LIGHT absorption ,PHOTOVOLTAIC power generation - Abstract
In the future, wireless power transmission is expected to cover power levels ranging from milliwatts to megawatts and over distances of a few meters to kilometers for both stationary and moving photovoltaic (PV) targets. Optical wireless power transmission (OWPT) is a promising solution for such multi-scale systems, which use the narrow beam divergence of light. To enhance the efficiency of power generation in PV targets, real-time detection of the target's position and attitude is crucial for OWPT systems. The authors propose detecting the PV using differential absorption images as one such method. This paper investigates algorithms for tracking moving PV targets and evaluates their performance. The first algorithm combines thresholds with an autoregressive (AR) model, while the other two use estimation with Kalman filters. The comparison of tracking algorithms can be undertaken using a score function based on the position estimation error. The evaluation results indicate that the AR model combined with thresholds, on average, outperforms the other models. There was no significant difference between the approach involving use of a Kalman filter to estimate positions based on a uniform motion model and the approach involving use of a Kalman filter to estimate the AR model. The authors' series of studies, from a former high-level requirement study to the current target tracking using differential absorption imaging, has verified a concept for one of the crucial processes in OWPT. These works form a step toward the practical implementation of OWPT systems. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
21. A two‐stage scheduling model for urban distribution network resilience enhancement in ice storms.
- Author
-
Zhao, Yuheng, Wan, Can, Wang, Chong, Wang, Naiyu, Deng, Ruilong, and Li, Binbin
- Subjects
ICE storms ,PHOTOVOLTAIC power generation ,MIXED integer linear programming ,GENERATIVE adversarial networks ,MONTE Carlo method ,POWER resources ,INTEGER programming ,STOCHASTIC programming - Abstract
This paper proposes a two‐stage stochastic scheduling model for urban distribution network resilience enhancement against ice storms, which coordinates mobile deicing equipment routing and distributed energy resources dispatching. An improved line ice thickness prediction model and a photovoltaic power generation prediction method in accordance with conditional generative adversarial networks are proposed to provide data boundaries for scheduling strategy. Facing the uncertainty of line failure, a two‐stage scenario‐based distribution network optimization model is established. At first stage, the mobile deicing equipment routing strategy is decided to mitigate the impact caused by ice storms. The Monte‐Carlo simulation method is introduced to describe the uncertainty of line failure due to ice acceleration. For the second stage, based on the results of photovoltaic forecasting and possible distribution line failure scenario generated by Monte‐Carlo simulation method, the optimal distributed energy resources dispatching strategy can be obtained through the mixed integer programming. The proposed model is simplified to a mixed integer linear programming model that can be solved by a commercial solver. The test results on the modified IEEE 33‐node system and modified 69‐node system demonstrate that the proposed method can effectively improve the resilience performance of urban distribution network under ice storms. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. Analysis of virtual power plants participating in the optimization operation of the electricity-carbon joint market based on the EEMD–IBA–Markov chain.
- Author
-
Tang, Difei, Li, Yongbo, Jiang, Hailong, Cheng, Honghu, Wang, Sheng, Chen, Yuguo, Duan, Pian, and Sun, Bingying
- Subjects
WIND power ,PHOTOVOLTAIC power generation ,POWER plants ,HILBERT-Huang transform ,WIND power plants ,ENERGY consumption ,CLEAN energy ,MARKOV processes ,CARBON emissions - Abstract
To enhance the utilization of clean energy sources, such as wind power and photovoltaic within virtual power plants, and mitigate carbon emissions, this paper proposes a virtual power plant participation in the electricity carbon joint market optimization operation model based on ensemble empirical mode decomposition–improved bat algorithm (IBA)–Markov chain new energy output prediction. First, complementary set empirical mode decomposition is performed on historical data to construct a Markov chain based wind power and photovoltaic prediction model optimized by IBA. Second, this prediction model is used to predict the daily generation power of wind power and photovoltaic power. Finally, with the optimization goals of maximizing the benefits and minimizing the carbon costs of virtual power plants, a virtual power plant system participating in the electricity carbon joint market model based on wind power and photovoltaic output prediction results is constructed. At the same time, demand response factors are introduced and solved using the NSGA-II algorithm. Taking a certain park as an example for simulation analysis, the research results show that the combined effect of carbon market and demand response can achieve 99.82% of new energy consumption in virtual power plants without significantly reducing profits, basically achieving complete new energy consumption, demonstrating the effectiveness of the proposed model in this paper. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
23. Robust power control for PV and battery systems: integrating sliding mode MPPT with dual buck converters.
- Author
-
Fekik, Arezki, Hamida, Mohamed Lamine, Azar, Ahmad Taher, Ghanes, Malek, Hakim, Arezki, Denoun, Hakim, Hameed, Ibrahim A., Thanikanti, Sudhakar Babu, Satpathy, Priya Ranjan, and Meena, Veerpratap
- Subjects
PHOTOVOLTAIC power generation ,PHOTOVOLTAIC power systems ,CLEAN energy ,ROBUST control ,CASCADE converters ,SLIDING mode control ,DC-to-DC converters ,AC DC transformers - Abstract
This paper presents a comprehensive exploration of an integrated Buck-Boost converter and Sliding Mode Control (SMC) Maximum Power Point Tracking (MPPT) system for optimizing photovoltaic energy conversion. The study focuses on enhancing solar energy extraction efficiency, regulating output currents, and ensuring effective battery utilization. Through a systematic analysis of converter component sizing and operational modes, the paper delves into the intricacies of the Buck-Boost converter. The unique contribution lies in the innovative integration of SMC with the traditional Perturb and Observe (P&O) algorithm, providing robust and adaptive MPPT under varying environmental conditions. Additionally, the paper introduces a battery management system with three distinct modes, namely, Charging, Direct, and Discharging, offering intelligent control over critical scenarios. Simulation results underscore the robustness of the proposed system under diverse conditions, demonstrating its effectiveness in managing power distribution based on battery charge levels, even in scenarios of insufficient solar power. Overall, this research significantly contributes to advancing the understanding of PV/battery systems and offers a practical, sustainable solution for optimizing energy production, distribution, and storage, marking a substantial stride towards a more efficient and sustainable energy future. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
24. Research on the MPPT of Photovoltaic Power Generation Based on Improved WOA and P&O under Partial Shading Conditions.
- Author
-
Jian Zhong, Lei Zhang, and Ling Qin
- Subjects
PHOTOVOLTAIC power generation ,PARTICLE swarm optimization - Abstract
Partial shading conditions (PSCs) caused by uneven illumination become one of the most common problems in photovoltaic (PV) systems, which can make the PV power-voltage (P-V) characteristics curve show multipeaks. Traditional maximum power point tracking (MPPT) methods have shortcomings in tracking to the global maximum power point (GMPP), resulting in a dramatic decrease in output power. In order to solve the above problems, intelligent algorithms are used in MPPT. However, the existing intelligent algorithms have some disadvantages, such as slowconvergence speed and large search oscillation. Therefore, an improvedwhale algorithm (IWOA) combined with the P&O (IWOA-P&O) is proposed for the MPPT of PV power generation in this paper. Firstly, IWOA is used to track the range interval of the GMPP, and then P&O is used to accurately find theMPP in that interval. Compared with other algorithms, simulation results show that this method has an average tracking efficiency of 99.79% and an average tracking time of 0.16 s when tracking GMPP. Finally, experimental verification is conducted, and the results show that the proposed algorithmhas better MPPT performance compared to popular particle swarm optimization (PSO) and PSO-P&O algorithms. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
25. Research on hydro-photovoltaic complementary analysis of Yangfanggou hydropower station on Yalong River.
- Author
-
Bin He, Weixuan Yin, Guohua Liang, and Lei Jiang
- Subjects
WATER power ,PHOTOVOLTAIC power generation ,CLEAN energy ,WATER supply ,CONSTRUCTION planning ,ELECTRIC fields - Abstract
Hydropower and photovoltaic power are widely used as clean energy sources around the world. Hydro-Photovoltaic complementary is precisely the use of the regulation performance of hydropower stations and the peak regulation performance of PV electric fields to improve the system's power generation efficiency. The Yalong River basin as one of China's clean energy bases, is rich in water and light resources. And now its midstream Yangfanggou hydropower station has just been completed, and the relevant PV electric field is in the construction planning stage. It is worth studying how to effectively utilize its hydropower and PV output resources. Therefore, Yangfanggou hydropower station and its PV electric field are taken as the research objects in this paper. The possibility of hydro-photovoltaic complementarity is analyzed within the year and day respectively. Then, a short-term scheduling model of hydrophotovoltaic complementarity is constructed according to the principle, and its operation mode and effect are optimized using the genetic algorithm NSGA-II. The results indicate that the annual power generation of the system is increased by about 1.4 billion kWh from the original hydropower through the hydrophotovoltaic complementary, and the annual guaranteed output is also increased with a large increase degree at the same time. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
26. Immersive Learning in Photovoltaic Energy Education: A Comprehensive Review of Virtual Reality Applications.
- Author
-
Alqallaf, Noor and Ghannam, Rami
- Subjects
PHOTOVOLTAIC power generation ,ENERGY industries ,VIRTUAL reality ,SOLAR energy ,VIRTUAL economy - Abstract
This paper presents a comprehensive and systematic review of virtual reality (VR) as an innovative educational tool specifically for solar photovoltaic energy systems. VR technology, with its immersive and interactive capabilities, offers a unique platform for in-depth learning and practical training in the field of solar energy. The use of VR in this context not only enhances the understanding of solar photovoltaic (PV) systems but also provides a hands-on experience that is crucial for developing the necessary skills in this rapidly evolving field. Among the 6814 articles initially identified, this systematic review specifically examined 15 articles that focused on the application of VR in PV education. These selected articles demonstrate VR's ability to accurately simulate real-world environments and scenarios related to solar energy, providing an in-depth exploration of its practical applications in this field. By offering a realistic and detailed exploration of PV systems, VR enables learners to gain a deeper understanding of harnessing, managing and using such a vast energy resource. The paper further discusses the implications of employing VR in educational settings, highlighting its potential to change the way solar energy professionals are trained, thereby contributing significantly to the acceleration of photovoltaic technology adoption and its integration into sustainable energy solutions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
27. A Review of Photovoltaic Module Failure and Degradation Mechanisms: Causes and Detection Techniques.
- Author
-
Al Mahdi, Hussain, Leahy, Paul G., Alghoul, Mohammad, and Morrison, Alan P.
- Subjects
PHOTOVOLTAIC power generation ,FAILURE (Psychology) ,MANUFACTURING industries ,DEGRADATION of textiles ,SCHOLARS - Abstract
With the global increase in the deployment of photovoltaic (PV) modules in recent years, the need to explore and understand their reported failure mechanisms has become crucial. Despite PV modules being considered reliable devices, failures and extreme degradations often occur. Some degradations and failures within the normal range may be minor and not cause significant harm. Others may initially be mild but can rapidly deteriorate, leading to catastrophic accidents, particularly in harsh environments. This paper conducts a state-of-the-art literature review to examine PV failures, their types, and their root causes based on the components of PV modules (from protective glass to junction box). It outlines the hazardous consequences arising from PV module failures and describes the potential damage they can bring to the PV system. The literature reveals that each component is susceptible to specific types of failure, with some components deteriorating on their own and others impacting additional PV components, leading to more severe failures. Finally, this review briefly summarises PV failure detection techniques, emphasising the significance of electrical characterisation techniques and underlining the importance of considering more electrical parameters. Most importantly, this review identifies the most prevalent degradation processes, laying the foundation for further investigation by the PV research community through modelling and experimental studies. This allows for early detection by comparing PV performance when failures or degradation occur to prevent serious progression. It is worth noting that most of the studies included in this review primarily focus on detailing failures and degradation observed in PV operations, which can be attributed to various factors, including the manufacturing process and other external influences. Hence, they provide explanations of these failure mechanisms and causes but do not extensively explore corrective actions or propose solutions based on either laboratory experiments or real-world experience. Although, within this field of study, there are corresponding studies that have designed experiments to suggest preventive measures and potential solutions, an in-depth review of those studies is beyond the scope of this paper. However, this paper, in turn, serves as a valuable resource for scholars by confining PV failures to critically evaluate available studies for preventative measures and corrective actions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
28. GCN–Informer: A Novel Framework for Mid-Term Photovoltaic Power Forecasting.
- Author
-
Zhuang, Wei, Li, Zhiheng, Wang, Ying, Xi, Qingyu, and Xia, Min
- Subjects
PHOTOVOLTAIC power generation ,DEEP learning ,SOLAR power plants ,FEATURE extraction ,CLEAN energy ,PREDICTION models - Abstract
Predicting photovoltaic (PV) power generation is a crucial task in the field of clean energy. Achieving high-accuracy PV power prediction requires addressing two challenges in current deep learning methods: (1) In photovoltaic power generation prediction, traditional deep learning methods often generate predictions for long sequences one by one, significantly impacting the efficiency of model predictions. As the scale of photovoltaic power stations expands and the demand for predictions increases, this sequential prediction approach may lead to slow prediction speeds, making it difficult to meet real-time prediction requirements. (2) Feature extraction is a crucial step in photovoltaic power generation prediction. However, traditional feature extraction methods often focus solely on surface features, and fail to capture the inherent relationships between various influencing factors in photovoltaic power generation data, such as light intensity, temperature, and more. To overcome these limitations, this paper proposes a mid-term PV power prediction model that combines Graph Convolutional Network (GCN) and Informer models. This fusion model leverages the multi-output capability of the Informer model to ensure the timely generation of predictions for long sequences. Additionally, it harnesses the feature extraction ability of the GCN model from nodes, utilizing graph convolutional modules to extract feature information from the 'query' and 'key' components within the attention mechanism. This approach provides more reliable feature information for mid-term PV power prediction, thereby ensuring the accuracy of long sequence predictions. Results demonstrate that the GCN–Informer model significantly reduces prediction errors while improving the precision of power generation forecasting compared to the original Informer model. Overall, this research enhances the prediction accuracy of PV power generation and contributes to advancing the field of clean energy. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
29. A review on technological and urban sustainability perspectives of advanced building‐integrated photovoltaics.
- Author
-
Constantinou, Stephanos, Al‐naemi, Faris, Alrashidi, Hameed, Mallick, Tapas, and Issa, Walid
- Subjects
CLEAN energy ,BUILDING-integrated photovoltaic systems ,PHOTOVOLTAIC power generation ,SOLAR energy ,RENEWABLE energy transition (Government policy) ,PHOTOVOLTAIC power systems ,SUSTAINABLE urban development ,SUSTAINABILITY - Abstract
With the escalating urgency for sustainable energy alternatives, solar power in urban landscapes has gained prominence. Building‐integrated photovoltaic (BIPV) systems are pivotal in this shift, blending efficient energy generation with architectural aesthetics. This review casts a spotlight on BIPV technologies, with a special emphasis on the less‐explored semitransparent photovoltaics (PVs). These systems are not only energy generators but also natural light facilitators, setting them apart from their opaque PV counterparts. Advancements in both transparent and opaque PV, such as crystalline silicon, are discussed. However, the paper prioritizes semitransparent PV's unique benefits, including harmonious integration with building design and simultaneous energy and daylight management. An exhaustive examination of current literature and developments sketches BIPV's trajectory, highlighting applications, challenges, and technological strides. The narrative extols the aesthetic, financial, and efficiency merits of BIPV, particularly the semitransparent variants' blend of functionality and design. Performance optimization of BIPV systems is scrutinized across various environments and architectural styles. This meticulous discussion seeks to clarify the status quo, emerging research avenues, and future prospects of BIPV in fostering a greener energy transition. The review compares BIPV configurations with traditional solar PV systems, charting a path for enhanced energy production, cost efficiency, and aesthetic integration, with semitransparent PV as a key player. By exploring the interplay between architectural design, energy efficiency, and urban planning, this paper aims to solidify the groundwork for future research, reinforcing the sustainability narrative in urban energy infrastructure. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
30. Blueprint and Control of an EV Charging Station Utilizing a Multiport Converter and ANSYS Twin Builder.
- Author
-
R, Santhoshkumar and S, Suresh
- Subjects
ELECTRIC vehicle charging stations ,INSULATED gate bipolar transistors ,ENERGY storage ,ELECTRIC power distribution grids ,ELECTRIC vehicles ,THYRISTORS - Abstract
The increasing popularity of electric vehicles (EVs) due to their limited onboard battery power and eco-friendliness has created a pressing need for widespread availability of charging stations. High-speed charging stations, in particular, can strain the power grid by potentially overloading it during peak hours, causing sudden power shortages and voltage drops. This research paper examines the ANSYS twin-Builder modeling approach to create a comprehensive model of an integrated system consisting of photovoltaic (PV) power generation, battery energy storage (BES), and a multiport device-based charging station. The integration of these components enables advanced stabilization techniques such as power gap equalization, peak shaving, valley filling, and voltage sag correction. The primary objective is to reduce the burden on the power grid by meeting the daily charging demand using sufficient daylight PV output. The simulation results have been validated to showcase the benefits of employing the PV-BES configuration in multiport EV charging circuits across various operational modes. To further improve performance, a transfer system is introduced, which incorporates gate turn-off thyristors and insulated-gate bipolar transistors into the EV charging station. The paper also analyzes power losses and efficiency for different modes and configurations, comparing them with simulations of conventional Si device-based charging networks. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
31. Modeling and Simulation Analysis of Photovoltaic Photothermal Modules in Solar Heat Pump Systems.
- Author
-
Sun, Tianbao, Li, Zhun, Gou, Yujun, Guo, Guangzheng, An, Yue, Fu, Yongqi, Li, Qingan, and Zhong, Xiaohui
- Subjects
SOLAR heating ,HEAT recovery ,PHOTOVOLTAIC power generation ,HEAT storage ,SOLAR pumps ,COOLING systems ,HEAT pumps - Abstract
A solar heat pump based on the photovoltaic photothermal (PV/T) module is a new technology that can improve the photovoltaic efficiency and recovery of waste heat in photovoltaic conversion. The comprehensive efficiency of a system can thus be greatly improved. At present, there is little research on the simulation of a solar heat pump based on the Simulink 2018 software. In this paper, PV/T modules are modeled and simulated using the Simulink software based on the typical meteorological parameters in Beijing city during summer and winter conditions. Considering the system characteristics of a simultaneous operation, the models of all components such as the compressor, condenser, evaporator, expansion valve, and heat storage tanks contained in a system are established based on the system's working principle, energy conservation equations, and some empirical formulas and then simulated. As PV/T modules are the key influencing factor for system performance, the model and simulation process are introduced in detail in this paper. The results show that the surface temperature of PV/T modules under different operating conditions are all significantly lower than that of ordinary photovoltaic panels. The average temperature of PV/T modules is only 15.2 °C, which is 20.2 °C lower than that of ordinary panels under summer conditions, and the average temperature of PV/T modules is only 0.5 °C, 17.8 °C lower than that of ordinary panels under winter conditions. The average photoelectric efficiency can be improved by 15.4% and 8.9%. And, the temperature change amplitude of PV/T modules is lower, which weakens the temperature fluctuation of the modules. The photovoltaic efficiency is therefore further increased. As a result, the power generation and photovoltaic efficiency are both improved significantly. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
32. Transient synchronization stability of photovoltaics integration by singular perturbation analysis.
- Author
-
Wu, Jiaqi, Han, Miao, Zhan, Meng, Xiong, Liansong, and Zhong, Cheng
- Subjects
SINGULAR perturbations ,SYNCHRONOUS generators ,PHOTOVOLTAIC power generation ,SYNCHRONIZATION ,PHOTOVOLTAIC power systems ,TRANSIENTS (Dynamics) - Abstract
The integration of large-scale photovoltaics (PVs) into the power grid has significantly altered the transient synchronization dynamics of traditional power systems dominated by synchronous generators (SGs) and posed great challenges to modeling and analysis of PVs integration. In this paper, the transient synchronization stability of the PV-SG system is studied using the singular perturbation technique. Firstly, a nonlinear model of a PV-SG system is established to reveal the multiscale transient synchronization characteristics. Further, the full system is decomposed into a slow subsystem and a fast subsystem by the singular perturbation technique. The fast subsystem containing the dynamics of the DC voltage control, terminal voltage control, and phase-locked loop, and the slow subsystem containing the dynamics of rotor motion can perfectly reflect the dynamics of the full system within the electromagnetic and electromechanical timescales, respectively. The proposed model provides a clearer physical picture of dynamics in the PV-SG system within the electromagnetic and electromechanical timescales. Subsequently, the stability of the slow and fast subsystems is investigated using the energy function and eigenvalue analysis methods, respectively. Meanwhile, the impacts of various operating, control, and structural parameters on the transient synchronization stability are uncovered. Different from the most existing research endeavors on the wide simulations of the PVs integration, the impact of PVs on the synchronization dynamics of SGs without considering the dynamical characteristics of the PV system, and the transient synchronization stability analyses of the PLL-based voltage source converter systems, it is the key contribution to study the transient synchronization dynamical characteristics of the PV system and its interaction with the SG under different timescales. All these are helpful and easy to extend to more complicated PV-SG systems. Finally, the analysis results are validated by extensive simulations. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
33. Short-Term Photovoltaic Output Prediction Based on Decomposition and Reconstruction and XGBoost under Two Base Learners.
- Author
-
Xu, Weihui, Wang, Zhaoke, Wang, Weishu, Zhao, Jian, Wang, Miaojia, and Wang, Qinbao
- Subjects
PHOTOVOLTAIC power generation ,SOLAR power plants ,HILBERT-Huang transform ,OBJECT tracking (Computer vision) ,ELECTRIC power distribution grids ,SEARCH algorithms ,SUPERPOSITION (Optics) - Abstract
Photovoltaic power generation prediction constitutes a significant research area within the realm of power system artificial intelligence. Accurate prediction of future photovoltaic output is imperative for the optimal dispatchment and secure operation of the power grid. This study introduces a photovoltaic prediction model, termed ICEEMDAN-Bagging-XGBoost, aimed at enhancing the accuracy of photovoltaic power generation predictions. In this paper, the original photovoltaic power data initially undergo decomposition utilizing the Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (ICEEMDAN) algorithm, with each intrinsic mode function (IMF) derived from this decomposition subsequently reconstructed into high-frequency, medium-frequency, and low-frequency components. Targeting the high-frequency and medium-frequency components of photovoltaic power, a limiting gradient boosting tree (XGBoost) is employed as the foundational learner in the Bagging parallel ensemble learning method, with the incorporation of a sparrow search algorithm (SSA) to refine the hyperparameters of XGBoost, thereby facilitating more nuanced tracking of the changes in the photovoltaic power's high-frequency and medium-frequency components. Regarding the low-frequency components, XGBoost-Linear is utilized to enable rapid and precise prediction. In contrast with the conventional superposition reconstruction approach, this study employs XGBoost for the reconstruction of the prediction output's high-frequency, intermediate-frequency, and low-frequency components. Ultimately, the efficacy of the proposed methodology is substantiated by the empirical operation data from a photovoltaic power station in Hebei Province, China. Relative to integrated and traditional single models, this paper's model exhibits a markedly enhanced prediction accuracy, thereby offering greater applicational value in scenarios involving short-term photovoltaic power prediction. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
34. A method for detecting photovoltaic panel faults using a drone equipped with a multispectral camera.
- Author
-
Duan, Ran and Ma, Zhenling
- Subjects
PHOTOVOLTAIC power systems ,SOLAR power plants ,PHOTOVOLTAIC power generation ,INFRARED imaging ,SOLAR energy ,COAL-fired power plants - Abstract
Photovoltaic power stations utilizing solar energy, have grown in scale, resulting in an increase in operational maintenance requirements. Efficient inspection of components within these stations is crucial. However, the large area of photovoltaic power generation, coupled with a substantial number of photovoltaic panels and complex geographical environments, renders manual inspection methods highly inefficient and inadequate for modern photovoltaic power stations. To address this issue, this paper proposes a method and system for hot spot detection on photovoltaic panels using unmanned aerial vehicles (UAVs) equipped with multispectral cameras. The UAVs capture visible and infrared images of the photovoltaic power plant, which are then processed for photogrammetry to determine imaging position and attitude. The infrared images are stitched together using this information, forming a geographically referenced overall image. Hot spot detection is performed on the infrared images, enabling the identification of faulty photovoltaic panels and facilitating efficient inspection and maintenance. Experimental trials were conducted at a photovoltaic power station in Qingyuan, Guangdong Province China. The results demonstrate the effectiveness of the proposed method in accurately detecting panels with hot spot faults. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
35. Optimal Scheduling of Island Microgrids with Seawater Pumped Storage Plants for Multi‐Energy Complementarity.
- Author
-
Su, Shiwei, Chai, Huarui, Lin, Jianbo, Yi, Chengming, and Li, Xin
- Subjects
- *
PARTICLE swarm optimization , *OCEAN energy resources , *ENERGY development , *ENERGY storage equipment , *PUMPED storage power plants , *DIESEL electric power-plants , *PHOTOVOLTAIC power generation , *OFFSHORE wind power plants - Abstract
The rapid development of new energy sources, such as offshore wind power and photovoltaic power, has provided a new solution to the problem of power supply for islands far from the mainland. Wave energy is a kind of renewable energy originated from the ocean, but the existing island power supply programs seldom consider this favorable natural condition. In addition, seawater variable‐speed pumped storage is a new idea to consume offshore wind power and improve the reliability of coastal and island power systems. In view of the stochastic and intermittent nature of new energy sources, this paper adopts seawater variable‐speed pumped storage power plants as energy storage equipment, and put forward an island power supply scheme with wind power, photovoltaic power generation, wave power generation, pumped storage power plants and diesel generator sets as a multifunctional complementary isolated grid. Firstly, wave energy generators, wind farms, photovoltaic farms, pumped storage power stations and diesel generator sets are modeled separately. Then, considering their respective operating conditions, constraints and load requirements, the optimal scheduling of island microgrids with multi‐energy complementarity is constructed. Finally, based on the improved particle swarm optimization algorithm, the model is solved. According to the wind power photovoltaic and wave power output curves of several typical scenarios in an island far away from the mainland, the cost and benefit of different schemes are compared to verify the effectiveness of the optimal scheduling in this paper. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
36. Research on Photovoltaic Power Generation Characteristics of Small Ocean Observation Unmanned Surface Vehicles.
- Author
-
Yang, Weiwei, Wang, Bingzhen, Ke, Wei, Shen, Shuyuan, and Wu, Xiao
- Subjects
PHOTOVOLTAIC power systems ,SOLAR panels ,SOLAR energy ,PHOTOVOLTAIC power generation ,AUTONOMOUS vehicles ,OSCILLATIONS - Abstract
Under the action of waves, a small unmanned surface vehicle (USV) will experience continuous oscillation, significantly impacting its photovoltaic power generation system. This paper proposes a USV photovoltaic power generation simulation model, and the efficiency of photovoltaic MPPT control under wave action is studied. A simulation model for solar irradiance on solar panels of USV under wave action is established based on CFD and solar irradiation models. The dynamic changes in irradiance of USV solar panels under typical wave conditions are analyzed. The MPPT efficiency of USV photovoltaic power generation devices under continuously changing irradiance conditions is studied on this basis. The simulation research results indicate that waves and solar altitude angles significantly impact the instantaneous irradiation energy of USV photovoltaic devices. However, the impact of waves on the average irradiance is relatively tiny. The sustained oscillation of irradiance poses certain requirements for the Maximum Power Point Tracking (MPPT) control frequency of USV photovoltaic systems; a disturbance control frequency of no less than 50 Hz is proposed. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. Research on Linear Active Disturbance Rejection Control Based on Grid-Forming Distributed Photovoltaics.
- Author
-
Liu, Kexuan, Zhang, Lixia, and Kang, Wei
- Subjects
PARTICLE swarm optimization ,PHOTOVOLTAIC power systems ,ELECTRIC power distribution grids ,PHOTOVOLTAIC power generation ,MAXIMUM power point trackers - Abstract
The "double carbon" policy promotes an increasing ratio of new energy installation and generation capacity annually, reducing system inertia and rendering the grid-forming (GFM) power grid increasingly susceptible to frequency fluctuations and other issues. This paper designs a power–frequency controller for grid-forming distributed photovoltaic systems by integrating LADRC and VSG control, aiming to enhance system robustness and stability under disturbances or faults. Furthermore, this study introduces the particle swarm optimization (PSO) algorithm based on LADRC principles to optimize LADRC, thereby improving the robustness and stability of grid-forming distributed photovoltaic systems to a certain extent. The feasibility and effectiveness of these two proposed control strategies are analyzed and validated separately using the MATLAB/Simulink R2022a simulation platform. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
38. Partial Shading of Photovoltaic Modules with Thin Linear Objects: Modelling in MATLAB Environment and Measurement Experiments.
- Author
-
Teneta, Janusz, Kreft, Wojciech, and Janowski, Mirosław
- Subjects
SPATIAL orientation ,WEATHER ,PHOTOVOLTAIC power generation ,MATHEMATICAL models ,STATISTICS - Abstract
This paper proposes a mathematical model for the shading profiles of a PV module with thin, long linear elements. The model includes the brightness distribution over the entire shading region (umbra, penumbra, and antumbra). A corresponding calculation code in the form of m-files has been prepared for the MATLAB environment. The input data for the calculations are the coordinates of the Sun's position in the sky, the dimensions and spatial orientation of the shading element, and the spatial orientation of the shaded PV module. The correctness of the model was verified by a measurement experiment carried out under actual outdoor weather conditions. Statistical analysis of the comparison between the measurement data from the experiment and the model showed its high accuracy. As part of this research work, it was also checked how shading with thin linear elements affects the current–voltage characteristics of the module. It turned out that even a small linear shading could reduce the power output of the module by more than 6%, with the distribution of this shading across the individual cells of the module being extremely important. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
39. Research on Boost-Type Cascaded H-Bridge Inverter and Its Power Control in Photovoltaic Power Generation System.
- Author
-
Kang, Jiayu, Yu, Miao, Sun, Boyang, Xiao, Yongchao, and Liu, Baoquan
- Subjects
PHOTOVOLTAIC power systems ,PHOTOVOLTAIC power generation ,HIGH voltages ,GRIDS (Cartography) ,VOLTAGE - Abstract
The cascaded H-bridge (CHB) inverter has become pivotal in grid-connected photovoltaic (PV) systems owing to its numerous benefits. Typically, DC–DC converters are employed to boost the input voltage in grid-connected systems to meet the grid's higher voltage requirements, but this approach increases equipment size and cost. To enhance inverter efficiency, this paper proposes a boost-type, three-phase CHB PV grid-connected inverter. This design can raise the input voltage and satisfy grid requirements with only a few additional components. Additionally, PV environmental fluctuations can cause variations in PV power generation, leading to a power imbalance in the inverter and potentially affecting the stability of the PV system. Based on this, we consider grid voltage fluctuations induced by unbalanced power output from the inverter and propose an improved control method based on the superposition of zero-sequence components. Finally, we construct a simulation model and conduct experimental verification using the MATLAB/Simulink platform. The validation results demonstrate that this topology reduces equipment volume and effectively enhances the efficiency of PV power generation systems. Furthermore, the designed control method ensures system stability while effectively mitigating power imbalances caused by PV module and grid voltage fluctuations. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
40. Optimally tuned cascaded FOPI-FOPIDN with improved PSO for load frequency control in interconnected power systems with RES.
- Author
-
Sekyere, Yaw O. M., Effah, Francis B., and Okyere, Philip Y.
- Subjects
INTERCONNECTED power systems ,PARTICLE swarm optimization ,TEST systems ,RENEWABLE energy sources ,PHOTOVOLTAIC power generation ,SCALABILITY ,ELECTRICAL load - Abstract
In the operation and control of power systems, load frequency control (LFC) plays a critical role in ensuring the stability and reliability of interconnected power systems. Modern power systems with significant penetration of highly variable and intermittent renewable sources present new challenges that make traditional control strategies ineffective. To address these new challenges, this paper proposes a novel LFC strategy that employs a cascaded fractional-order proportional integral-fractional-order proportional integral derivative with a derivative filter (FOPI-FOPIDN) as a controller. The parameters of the FOPI-FOPIDN are optimised using a variant of the particle swarm optimization (PSO) in the literature called ADIWACO. The effectiveness and scalability of the proposed strategy are validated by extensive simulations conducted on two- and three-area test systems and performance comparisons with recent LFC control strategies in the literature. The performance metrics used for the evaluation are ITAE values, deviations in the power flows in the tie-lines, and deviations in the frequencies of the control areas with the power systems subjected to diverse load and RES generation disturbances in several experimental scenarios. Governor dead band, communication time delay, and generation rate constraints are considered in one of the scenarios for more realistic evaluation. Again, the controller's robustness to uncertain model parameters is validated by varying the parameters of the three-area test system by ± 50%. The simulation results obtained confirm the controller's robustness and its superiority over the comparison LFC strategies in terms of the above performance metrics. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. 面向零能耗太阳能住宅的光伏发电系统设计及仿真实验.
- Author
-
王攀攀, 杨千禧, 刘 扬, 张 成, and 徐瑞东
- Abstract
Copyright of Experimental Technology & Management is the property of Experimental Technology & Management Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
- Published
- 2024
- Full Text
- View/download PDF
42. Impact of Multi-Energy System and Different Control Strategies on a Generic Low-Voltage Distribution Grid.
- Author
-
Kneiske, Tanja M.
- Subjects
ELECTRIC power distribution grids ,PHOTOVOLTAIC power generation ,HEAT pumps ,ENERGY management ,SPACE heaters ,COST control ,INDEPENDENT system operators - Abstract
The rising electricity costs, cost of space heating, and domestic hot water end up driving consumers toward reducing expenses by generating their electricity through devices like photovoltaic systems and efficient combined heat and power plants. When coupled with thermal systems via an energy management system (EMS) in a Multi-Energy System (MES), this self-produced electricity can effectively lower electricity and heating bills. However, MESs with EMSs can serve various purposes beyond cost reduction via self-consumption, such as reacting to variable electricity prices, meeting special grid connection conditions, or minimizing CO
2 emissions. These diverse strategies create unique prosumer profiles, deviating significantly from standard load profiles. The potential threat to the power grid arises as grid operators lack visibility into which consumers employ which control strategies. This paper investigates the impact of controlled MESs on the power grid compared to average households and answers whether new control strategies affect the planning strategies of low voltage grids. It proposes a comprehensive four-step toolchain for the detailed simulation of thermal–electrical load profiles, MES control strategies, and grid dynamics. It includes a new method for the grid impact analysis of extreme and average bulk values. As a result, this study identifies three primary factors influencing distribution power grids by MESs. Firstly, the presence and scale of photovoltaic (PV) systems significantly affect extreme values in the grid. Secondly, MESs incorporating combined heat and power (CHP) and heat pump (HP) units impact the overall grid performance, mainly reflected in bulk values. Thirdly, the placement of an MES with heating systems, especially when concentrated in one feeder, plays a crucial role in grid dynamics. Despite the three distinct factors identified as impactful on the power grid, this study reveals that the various control strategies, despite leading to vastly different grid profiles, do not exhibit divergent impacts on buses, lines, or transformers. Remarkably, the impact of MESs remains consistently similar across the range of control strategies studied. Therefore, different control strategies do not pose an additional challenge to the grid integration of MESs. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
43. A Review of Voltage Control Studies on Low Voltage Distribution Networks Containing High Penetration Distributed Photovoltaics.
- Author
-
Gao, Xiaozhi, Zhang, Jiaqi, Sun, Huiqin, Liang, Yongchun, Wei, Leiyuan, Yan, Caihong, and Xie, Yicong
- Subjects
VOLTAGE control ,POWER distribution networks ,ENERGY storage ,ELECTRICAL load ,LOW voltage systems ,PHOTOVOLTAIC power generation ,REACTIVE power ,ELECTRON tube grids - Abstract
Distributed photovoltaic (PV) in the distribution network accounted for an increasing proportion of the distribution network, and the power quality of the distribution network of the power quality problem is more and more significant. In this paper, the voltage regulation methods for low-voltage distribution networks containing high-penetration PV are investigated. First, the working principles of the four voltage control methods are introduced: energy storage system configuration, regulating the reactive power output of PV inverters, restricting the active power output of PV, adjusting the switching positions of on-load regulator trap changer and distribution network reconfiguration, and then, in combination with the recent related research, the optimization of each method is compared horizontally with its respective concerns and characteristics. The optimization of each method is compared horizontally with the recent studies to find out the focus and characteristics of each method, and the shortcomings of each method are explored. Coordinated voltage control through multiple flexibility resources has become the mainstream voltage regulation scheme, and distribution network voltage regulation is considered from the perspective of flexibility resources. The three types of flexibility resources, namely, source, network, and storage, have been widely used in distribution network voltage regulation. Although load-side resources have become one of the main regulation resources of the new type of power system, the current study introduces less about the participation of load-side flexibility resources in voltage regulation of LV distribution networks and advancing the application of load-side resources in voltage regulation of LV distribution networks is the focus of future research. Then, the important role of load-side flexibility resources in voltage regulation is described in three parts, namely, the important role of load-side resources, the development trend, and the suggestions for promoting the coordination of source-network-load-storage flexibility resources, aiming to promote the application of load-side resources in voltage regulation in LV distribution networks, and the suggestions and programs are proposed for the technological challenges faced by voltage regulation. In the context of today's new power system emphasizing the interaction of source, network, load, and storage, new technologies and methods for solving voltage problems in LV distribution networks are prospected, with a view to providing certain reference value for the actual operation and optimization of distribution network systems. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
44. Sustainable Skylines: A Study Of Green Building Initiatives In PCMC.
- Author
-
Kulkarni, Santosh and Sutar, Yogita
- Subjects
SUSTAINABLE buildings ,PHOTOVOLTAIC power generation ,RENEWABLE energy sources ,REAL estate development ,ENERGY conservation ,PARKS ,DIESEL electric power-plants - Abstract
"The greatest threat to our planet is the belief that someone else will save it." Well said by Robert Swa. This research paper focuses on this belief that we need to pay attention towards green initiative for environment conservation and energy efficiency as it is very essential for earth for long term sustainability. PCMC (Pimpri Chinchwad Municipal Co-orporation) has planned to spend Rs. 5000 crores on Green projects. One of Greenest and first in India Corporate Campus in World is Suzlon One earth situated in Magarpatta road, Hadapsar, Pune. This Campus is completely relying on renewable energy sources, utilizing a combination of hybrid wind turbines, solar panels, and photovoltaic cells for power generation. This studies depicts importance of green building initiative and by 2025, the majority of residential areas in PCMC are expected to transition into selfsustaining real estate developments. The PCNTDA (Pimpri Chinchwad New Town Development Authority) has outlined a structured, forwardthinking, and eco-conscious approach to real estate development in PCMC. [ABSTRACT FROM AUTHOR]
- Published
- 2024
45. Fault detection system and smart power utilization using IoT monitoring for photovoltaic system.
- Author
-
Azim, Afi, Hassan, Omar Abu, Zambri, Nor Aira, and Zulkifli, Shamsul Aizam
- Subjects
- *
SOLAR technology , *PHOTOVOLTAIC power systems , *OPEN-circuit voltage , *PHOTOVOLTAIC power generation , *INTERNET of things , *SHORT circuits , *SOLAR system - Abstract
Solar photovoltaic (PV) systems are the most widely renewable technologies used to generate power. In this paper, smart monitoring and fault detection on the off-grid solar system is proposed and designed to improve the solar PV system's operation more effectively. Environmental conditions, equipment interference, and changes in existing parameters normally cause problems in the system. A real-time monitoring system is required to monitor the performance of the solar PV system circuit. The internet of things (IoT) is used in this project to directly observe the energy in the system via an application platform. Also, this paper discussed solar PV system faults detection based on the difference in voltage and current values measured during usual and unusual periods based on parameters value. This project will reduce the time and effect in searching for faults in the solar system. The results show several categories, including open circuits and short circuits, are classified as faults in this system. In general, the fault detection system and smart power utilization using IoT monitoring for the photovoltaic system is the focus of this project's development. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
46. Confirmation of the power gain for solar photovoltaic systems in alpine areas and across scales.
- Author
-
Frischholz, Y., Schilt, U., Sharma, V., Kahl, A., Strebel, S., Anderegg, D., Rohrer, J., and Lehning, M.
- Subjects
PHOTOVOLTAIC power systems ,SOLAR energy ,RENEWABLE energy sources ,PHOTOVOLTAIC power generation - Abstract
Introduction: High Alpine regions show a great potential for solar photovoltaic electricity production in winter due to the reflective properties of snow and the larger number of sun hours compared to lower urban and peri-urban regions. In countries with a pronounced deficit in domestic electricity production such as Switzerland, utility-scale projects of Alpine-PV power plants are now flourishing. The harsh environmental conditions and the complexity of the high-Alpine topography however challenge the conventional design practices. In this context, the main question the article addresses is the representation of test-scale measurement in the performances of Alpine-PV, utility-scale power plants. Methods: This article focuses on the comparison between long term tests and the first Alpine-PV utility-scale power plant in Switzerland. Results: The results show that the main performance indicators such as the Alpine-to-Midlands final yield ratio or the winter fraction, do scale. However, absolute final yield values are consistently lower at the utility scale. Discussion: The paper discusses the possible impacts of the complex Alpine topography as constraint for the design of the larger extent of utility-scale power plants as well as the influence of scale on the snow induced losses. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
47. Development of Low-Cost c-Si-Based CPV Cells for a Solar Co-Generation Absorber in a Parabolic Trough Collector.
- Author
-
Aydin, Elsen, Buchroithner, Armin, Felsberger, Richard, Preßmair, Rupert, Azgın, Ahmet, Turan, Rasit, Keçeci, Ahmet Emin, Bektaş, Gence, and Akinoglu, Bulent
- Subjects
SOLAR cells ,PARABOLIC troughs ,SOLAR collectors ,SOLAR technology ,PHOTOVOLTAIC power generation ,WASTE heat ,MANUFACTURING processes - Abstract
Concentrator photovoltaics (CPVs) have demonstrated high electrical efficiencies and technological potential, especially when deployed in CPV–thermal (CPV-T) hybrid absorbers, in which the cells' waste heat can be used to power industrial processes. However, the high cost of tracking systems and the predominant use of expensive multi-junction PV cells have caused the market of solar co-generation technologies to stall. This paper describes the development and testing of a low-cost alternative CPV cell based on crystalline silicone (c-Si) for use in a novel injection-molded parabolic hybrid solar collector, generating both, photovoltaic electricity and thermal power. The study covers two different c-Si cell technologies, namely, passive emitter rear contact (PERC) and aluminum back surface field (Al-BSF). Simulation design and manufacturing are described with special attention to fingerprinting in order to achieve high current carrying capacities for concentrated sunlight. It was determined that Al-BSF cells offer higher efficiencies than PERC for the considered use case. Solar simulator tests showed that the highly doped 4 cm
2 cells (50 ohm/sq) reach efficiencies of 16.9% under 1 sun and 13.1% under 60 suns at 25 °C with a temperature coefficient of −0.069%(Abs)/K. Finally, options to further improve the cells are discussed and an outlook is given for deployment in a field-testing prototype. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
48. Energy management of solar photovoltaic fed water pumping system based BLDC motor drive using NBO–SDRN approach.
- Author
-
Joshua, Kanthapitchai Paul, Rangasamy, Lenin Vadugapalayam, Reddy, Chinthalacheruvu Venkata Krishna, and Veeruchinnan, Rajangam
- Subjects
- *
WATER pumps , *SOLAR energy , *OPTIMIZATION algorithms , *ENERGY management , *POWER resources , *PHOTOVOLTAIC power generation - Abstract
This paper proposes a hybrid NBO–SDRN approach for a solar PV (SPV) array fed water pumping system utilizing a single-ended primary inductor converter (SEPIC) based BLDC motor drive. The proposed hybrid method combines Namib beetle optimization algorithm (NBO) and spiking deep residual networks (SDRN). Commonly, it is named the NBO–SDRN technique. The main goal of the NBO–SDRN method is enhanced energy efficiency, improved control algorithms, and optimal utilization of available solar energy resources. This paper focuses on integrating a SEPIC converter-based brushless DC motor drive in such systems to optimize energy conversion, enhance control, and promote environmentally friendly water supply. The BLDC (brushless direct current) motor drive and advanced control algorithms enable precise speed and torque control, improving overall energy efficiency and adaptability to varying water demand. By then, the NBO–SDRN method is done in the MATLAB working stage, and the execution is calculated with the present procedures. The proposed approach performs better outcomes in all existing singular spectrum analysis (SSA), heap-based optimization (HBO), and bee circle search algorithm (CSA) methods. From the result, the NBO–SDRN method-based efficiency is 95% higher than the existing methods. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
49. Advanced Processing Techniques and Impurity Management for High-Purity Quartz in Diverse Industrial Applications.
- Author
-
Long, Hailin, Zhu, Deqing, Pan, Jian, Li, Siwei, Yang, Congcong, and Guo, Zhengqi
- Subjects
ROASTING (Metallurgy) ,INDUSTRIAL applications ,MANUFACTURING processes ,QUARTZ ,INDUSTRIAL research ,PHOTOVOLTAIC power generation - Abstract
While numerous studies have explored the mineralogical characteristics and purification techniques of high-purity quartz (HPQ), discussions on impurity control during various purification processes and their applications in photovoltaics, electronics, and optics remain limited. This review delves into the adverse effects of impurities such as aluminum, iron, and sodium in the manufacturing processes of these industries, emphasizing their critical role as these impurities can degrade material performance. This paper focuses on analyzing the types of impurities found in quartz and evaluates existing purification technologies such as acid washing, ultrasonic acid washing, chlorination roasting, and calcination quenching. It highlights the limitations of current technologies in processing quartz ore and discusses the advantages of different impurity types under various technological treatments. Moreover, it explores the environmental and economic impacts of these high-purity processes, underlining the necessity for more environmentally friendly and cost-effective purification techniques. The purpose of this review is to provide a comprehensive technical and strategic framework for the use of high-purity quartz in high-tech applications, supporting future research and industrial applications in this critical material field. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
50. COMPARISON OF MPPT ALGORITHMS FOR DC-DC BOOST CONVERTER IN GRID-TIED PHOTOVOLTAIC SYSTEMS.
- Author
-
Hussien, Ahmed. E. A., Emad-Eldeen, Ahmed, Ramamurthy, Praveen C., Shehata, Nabila, and Abdellatif, Walid S. E.
- Subjects
MAXIMUM power point trackers ,PHOTOVOLTAIC power systems ,PHOTOVOLTAIC power generation ,SOLAR energy conversion ,DC-to-DC converters ,BOOSTING algorithms ,GRIDS (Cartography) - Abstract
In unpredictable weather circumstances, a maximum power point tracking (MPPT) approach is critical for ensuring maximum photovoltaic (PV) output power is extracted. In this paper, we will compare the incremental conductance algorithm (IC), perturb and observe (p&o), and fuzzy logic controller (FLC) as maximum power point tracking (MPPT) techniques. The three algorithms were used on a photovoltaic energy conversion system that was linked to a grid. The suggested methodologies investigate the photovoltaic (PV) system's solar energy conversion performance under various irradiance and temperature circumstances. Lastly, a performance comparison between IC, P O, and FLC has been performed, demonstrating the superiority of the fuzzy controller over the other approaches. FLC converts photovoltaic electricity readily, reducing fluctuations, and it responds quickly to variations in solar irradiation (the shading effect). The simulation results demonstrate that the controller using fuzzy logic performs well, allowing the inverter to convert the electricity provided by the solar panels. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.