Search

The imaging of high-speed high-squint synthetic aperture radar (HSHS-SAR), which is mounted on maneuvering platforms with curved trajectory, is a challenging task due to the existence of 3-D acceleration and the azimuth spatial variability of range migration and Doppler parameters. Although existing imaging algorithms based on linear range walk correction (LRWC) and nonlinear chirp scaling (NCS) can reduce the range–azimuth coupling of the frequency spectrum (FS) and the spatial variability of the Doppler parameter to some extent, they become invalid as the squint angle, speed, and resolution increase. Additionally, most of them ignore the effect of acceleration phase calibration (APC) on NCS, which should not be neglected as resolution increases. For these issues, a modified frequency nonlinear chirp scaling (MFNCS) algorithm is proposed in this paper. The proposed MFNCS algorithm mainly includes the following aspects. First, a more accurate approximation of range model (MAARM) is established to improve the accuracy of the instantaneous slant range history. Second, a preprocessing of the proposed algorithm based on the first range compression, LRWC, and a spatial-invariant APC (SIVAPC) is implemented to eliminate most of the effects of high-squint angle and 3-D acceleration on the FS. Third, a spatial-variant APC (SVAPC) is performed to remove azimuth spatial variability introduced by 3-D acceleration, and the range focusing is accomplished by the bulk range cell migration correction (BRCMC) and extended secondary range compression (ESRC). Fourth, the azimuth-dependent characteristics evaluation based on LRWC, SIVAPC, and SVAPC is completed to derive the MFNCS algorithm with fifth-order chirp scaling function for azimuth compression. Consequently, the final image is focused on the range time and azimuth frequency domain. The experimental simulation results verify the effectiveness of the proposed algorithm. With a curved trajectory, HSHS-SAR imaging is carried out at a 50° geometric squint angle and 500 m × 500 m imaging width. The integrated sidelobe ratio and peak sidelobe ratio of the point targets at the scenario edges approach the theoretical values, and the range-azimuth resolution is 1.5 m × 3.0 m. [ABSTRACT FROM AUTHOR]

Summary: The reconstruction of reflectivity profile of the synthetic aperture radar (SAR) is an important field of research. SAR tomography is an advanced 3D imaging technique for the spectrum estimation in the elevation direction for each azimuth resolution cell. This work presents the processing chain for the tomographic reconstruction from ALOS PALSAR data for an urban region. First, the data are preprocessed by removing the speckle noise followed by atmospheric phase screen and topographic correction. Then the SAR images are stacked together with one master image and the remaining slave images on the baseline value. After the images are coregistered, the interferogram is generated from the image to obtain the difference of the phase value. Then the proposed super resolution SAR (SRS) algorithm is attempted for TomoSAR processing, which combines the functionality of modern machine learning method like deep learning with parametric block‐based compressive sensing approach. Finally, a 3D image is reconstructed from the input data. Evaluation is carried out by comparing the results of the proposed method with other spectrum estimation methods such as nonlinear least square, Capon, and multisignal classification. The normal baseline of the interferometric fringes is about 368.54 m. The proposed SRS algorithm gives improved results with less mean elevation error of 1.8 m and the less standard deviation error of 4.85 m. Finally, the result reveals that the SRS algorithm performed better than other TomoSAR algorithms with the less relative error 0.003. [ABSTRACT FROM AUTHOR]

A novel compressive sensing (CS) synthetic-aperture radar (SAR) called AgileSAR has been proposed to increase swath width for sparse scenes while preserving azimuthal resolution. AgileSAR overcomes the limitation of the Nyquist sampling theorem so that it has a small amount of data and low system complexity. However, traditional CS optimization-based algorithms suffer from manual tuning and pre-definition of optimization parameters, and they generally involve high time and computational complexity for AgileSAR imaging. To address these issues, a pseudo- L 0 -norm fast iterative shrinkage algorithm network (pseudo- L 0 -norm FISTA-net) is proposed for AgileSAR imaging via the deep unfolding network in this paper. Firstly, a pseudo- L 0 -norm regularization model is built by taking an approximately fair penalization rule based on Bayesian estimation. Then, we unfold the operation process of FISTA into a data-driven deep network to solve the pseudo- L 0 -norm regularization model. The network's parameters are automatically learned, and the learned network significantly increases imaging speed, so that it can improve the accuracy and efficiency of AgileSAR imaging. In addition, the nonlinearly sparsifying transform can learn more target details than the traditional sparsifying transform. Finally, the simulated and data experiments demonstrate the superiority and efficiency of the pseudo- L 0 -norm FISTA-net for AgileSAR imaging. [ABSTRACT FROM AUTHOR]