Search

There have been fruitful publications on thermal comfort of urban residential buildings in China. However, there is a lack of reviews on this topic to perform a comprehensive analysis and find opportunities to meet occupants' thermal comfort needs while improving building energy efficiencies. This paper addresses this issue by presenting a systematic review on the advancements in research on thermal comfort in urban residential buildings in China. Firstly, two common thermal comfort research approaches, i.e., field studies and laboratory studies, are discussed. Secondly, eleven main thermal comfort evaluation indicators are summarized. Finally, this paper analyzes the thermal comfort survey data from different researchers, discusses the impacts of adaptive behaviors on human thermal comfort, and provides recommendations for future research on urban residential thermal comfort. It was found that people have higher and higher requirements for their indoor thermal environment as time goes by, especially in the winter; the thermoneutral temperature is higher in warmer climate regions in the summer but lower in the winter than in colder climate regions; the thermoneutral temperature tends to increase with the indoor air temperature due to an adaptation to the indoor thermal environment. The outcomes of this paper provide valuable information on thermal comfort behaviors of urban residents in different climate zones in China, which can serve as a resource for the academic community conducting future research on thermal comfort and assist policymakers in enhancing building energy efficiencies without compromising the occupants' comfort. [ABSTRACT FROM AUTHOR]

Separating existing historical precipitation data into solid and liquid precipitation remains a challenge in the study of climate change, extreme precipitation, and hydrological modelling. Based on historical daily air temperature and precipitation data, as well as visual observations of precipitation phase (weather phenomena records) in China mainland, this study proposed a snow‐day direct definition method (SDDM) to determine the threshold air temperature (TAT) of rainfall and snowfall, and analysed the spatial pattern and its influential factors. The main findings include: (1) the TAT based on the SDDM varied from −1.2 to 6.3°C, with a mean value of 2.8°C for the entire study region; (2) TAT was generally higher and more variable in the low‐latitude areas, and the Qinghai‐Tibet Plateau was characterized by an abnormally high average TAT of 5.2°C, almost twice as large as that of the eastern monsoon region; (3) TAT exhibited a significant positive correlation with altitude and negative correlation with precipitation and relative humidity. The results presented in this paper have potential application for studies of large‐scale snowfall climatology and climate change, weather forecasting techniques, and hydrological model parameterization in areas with complex and diverse geographical and climatic conditions. [ABSTRACT FROM AUTHOR]

Diffuse light is produced by clouds and aerosols in the atmosphere. Exploring the effects of diffuse light on ecosystem productivity is important for understanding the terrestrial carbon (CO2) cycle. Here, 2 years of gross ecosystem primary productivity (GEP) from a (winter) wheat cropland in China was assessed using eddy covariance technology to explore the effects of diffuse photosynthetic active radiance (PAR) on wheat GEP. Wheat GEP increased significantly and positively along with diffuse PAR. In addition, wheat GEP was significantly affected by total PAR, air temperature, and vapor press deficit in different diffuse PAR fraction (fDIF) change stages. Because significant autocorrelations existed among the controlling factors, a path analysis was used to quantify the effects of diffuse light on GEP. Diffuse PAR was the primary and secondary importance factors affecting GEP with direct path coefficients of 0.54 and 0.48, respectively, in different fDIF change stages. A multilayer canopy model revealed that the middle and lower canopy levels intercepted more light when diffuse PAR increased. This resulted in the photosynthetic enhancement of middle and lower canopy levels, which contributed approximately 65% and 35%, respectively, to the increase in photosynthesis for the entire canopy (~ 30.5%). Overall, our study provided new evidence regarding the importance of diffuse light for CO2 uptake in agroecosystems, which is important for predicting the responses of ecosystem CO2 budgets to future climate-related light changes. [ABSTRACT FROM AUTHOR]

• The satellite-derived air temperature was utilized to characterize heat hazards. • Gridded population density was spatialized to describe human exposure. • A more stable weighting method that combines objective and subjective methods was used. A quantitative and comprehensive assessment method was proposed for heat health risk. • The dominant factors in high-risk areas were identified and analyzed. With frequent extreme heat events (EHEs), rapid urbanization, and uneven social development, comprehensive assessment of heat-related health risks is important for tolerating hot weather. This paper proposed a quantitative method for assessing heat-related health risks at the grid scale. A combination of multisource remote sensing and socio-economic data was utilized to develop an integrated heat health risk index (HRI) considering three dimensions of heat hazards, exposure, and vulnerability in the Yangtze River Delta (YRD), China. Compensating for the limitations of land surface temperature (LST) and station data, daily air temperatures were retrieved to calculate heat hazard index. Gridded population density data were developed using nighttime light data to calculate the exposure index. By combining them and other indicators, an HRI map of the YRD was developed. Furthermore, the spatial heterogeneity and dominant factors of the heat health risk were examined. The results showed that 13.2 % of the areas in the YRD were in high and medium high risk, while 58.6 % were in low and medium low risk. The high-risk areas were primarily concentrated in the Shanghai-Hangzhou Bay urban agglomeration, suggesting synergy between increased exposure and hazards in these metropolitan areas. The high-risk areas were predominantly dominated by hazard/exposure (H-E) and exposure/vulnerability (E-V), accounting for 27.2 % and 21.9 % of the YRD's total area respectively. This study contributes to the identification of areas vulnerable to heat stress and provides references for optimizing heat risk management strategies. [ABSTRACT FROM AUTHOR]

Mg/Ca ratio in stalagmites primarily serves as an indicator of past hydrological conditions rather than temperature variations. Here, we present an Mg/Ca ratio record in a stalagmite from northern China, spanning ice age termination II. A unique finding is that Mg/Ca ratio shows a moderately strong positive correlation with cave air temperature obtained from clumped isotopes data in the same stalagmite. The stable hydrogeochemistry of source water and high temperature sensitivity of Mg partition coefficient plausibly explain this temperature dependence. Furthermore, we establish an Mg/Ca‐temperature calibration for stalagmites from mid‐latitudes, encompassing a temperature range between ∼2 and ∼15°C, where Mg/Ca = 14.221 × e0.073×T (R2 = 0.40). Applying this function to Mg/Ca ratio from similar stalagmites could tentatively provide a quantitative regional temperature record over millennial and centennial timescales. This research highlights Mg/Ca ratio in stalagmites as a potential palaeo‐temperature proxy and introduces, for the first time, a tentative Mg/Ca‐temperature calibration function for speleothems. Plain Language Summary: Stalagmite is one type of speleothems that grow from the floor of caves. The geochemical indexes within stalagmites, such as Mg/Ca ratio, can help us to understand the past climate changes. Here, we conducted a study on a stalagmite from northern China during ice age termination II. Traditionally, Mg/Ca ratios in stalagmites have been used to investigate past hydrological conditions. However, we found that Mg/Ca ratio matches the cave air temperature obtained from clumped isotopes data within the same stalagmite. This correlation was explained by the stable chemistry of the source water and the sensitivity of Mg partition coefficient to temperature. We also developed a tentative formula to calculate past temperature from Mg/Ca ratio in similar speleothems. Key Points: A Chinese stalagmite at termination II shows moderately strong positive correlation between Mg/Ca ratio and clumped isotopes‐temperatureStable drip water hydrogeochemistry and high temperature sensitivity of Mg partition coefficient may explain this temperature dependenceWe tentatively establish, for the first time, an Mg/Ca‐temperature calibration function for speleothems [ABSTRACT FROM AUTHOR]

While previous studies have largely focused on anthropogenic warming characterized by surface air temperature, little is known about the behaviors of human‐perceived temperature (HPT), which describe the "feels‐like" equivalent temperature by considering the joint effects of temperature, humidity and/or wind speed. Here we adopted an optimal fingerprinting method to compare seasonal mean HPTs in China with those from simulations conducted with multiple climate models participating in the Coupled Model Intercomparison Project Phase 6. We found clear anthropogenic signals in the observational records of changes in both summer and winter HPTs over the period 1971–2020. Moreover, the anthropogenic greenhouse gas influence was robustly detected, with clear separation from natural and anthropogenic aerosol forcings. The anthropogenic greenhouse gas forcing plays the dominant role (>90%) of human‐perceived warming. Urbanization effects contribute slightly and moderately to the estimated trends in summer and winter HPTs, respectively, in addition to the effects of external forcing. Plain Language Summary: Human influences have been identified in the observed warming quantified by surface air temperature (SAT), but SAT alone is inadequate as a metric for human thermal comfort. Here we focus on human‐perceived temperature (HPT), which describes the "feels‐like" equivalent temperature by considering the joint effects of temperature, humidity, and/or wind speed. We isolate anthropogenic impacts on the observed increase in summer and winter HPTs in China during 1971–2020 by comparing observations with state‐of‐the‐art climate models. Results show that the influence of anthropogenic greenhouse gas is detected, with clear separation from other external forcings such as solar and volcanic activities and anthropogenic aerosols. The human‐induced greenhouse gas increases are also found to explain most (>90%) of the observed human‐perceived warming. Along with the effects of large‐scale anthropogenic forcing, urbanization effects also have a slight to moderate influence on the estimated trends in summer and winter HPTs. Our work is an early attempt to provide quantitative evidence for the physiological impacts of anthropogenic global warming and local urbanization on human beings. Key Points: The warming is quantified by human‐perceived temperature that considers the joint effects of temperature, humidity and/or wind speedHuman influence could be robustly detected in both summer and winter human‐perceived warmingThe observed increase in human‐perceived temperature is mostly attributed to anthropogenic greenhouse gas increases [ABSTRACT FROM AUTHOR]

Introduction: The components of nighttime sap flux (En), which include transpiration (Qn) and stem water recharge (Rn), play important roles in water balance and drought adaptation in plant communities in water-limited regions. However, the quantitative and controlling factors of En components are unclear. Methods: This study used the heat balance method to measure sap flow density in Vitex negundo on the Loess Plateau for a normal precipitation year (2021) and a wetter year (2022). Results: The results showed that the mean values were 1.04 and 2.34 g h-1 cm-2 for Qn, 0.19 and 0.45 g h-1 cm-2 for Rn in 2021 and 2022, respectively, and both variables were greater in the wetter year. The mean contributions of Qn to En were 79.76% and 83.91% in 2021 and 2022, respectively, indicating that the En was mostly used for Qn. Although the vapor pressure deficit (VPD), air temperature (Ta) and soil water content (SWC) were significantly correlated with Qn and Rn on an hourly time scale, they explained a small fraction of the variance in Qn on a daily time scale. The main driving factor was SWC between 40-200 cm on a monthly time scale for the Qn and Rn variations. Rn was little affected by meteorological and SWC factors on a daily scale. During the diurnal course, Qn and Rn initially both declined after sundown because of decreasing VPD and Ta, and Qn was significantly greater than Rn, whereas the two variables increased when VPD was nearly zero and Ta decreased, and Rn was greater than Qn. Discussion: These results provided a new understanding of ecophysiological responses and adaptation of V. negundo plantations to increasing drought severity and duration under climate changes. [ABSTRACT FROM AUTHOR]

There are few studies on the climate and glacial scale in the mountains east of the Qinghai–Tibet Plateau. So, we used glacial features to determine the range of the area's paleoglaciers and the equilibrium line altitude (ELA) of theGlA modern and paleoglaciers in the Tianchi area of the Changbai Mountains. Then, the GlaRe toolbox 2015 () was used to reconstruct the surface of the paleoglaciers. The probable air temperature during the glacial advances of the LGM was calculated by applying the P-T and LR models. The results showed the following: (1) the change in ELA is 950 m in the Tianchi area of the Changbai Mountains; (2) glacial coverage in the Tianchi area of the Changbai Mountains during the LGM period was ~27.05 km2 and the glacial volume was ~9.94 km3; and (3) the mean temperature in the Tianchi area of the Changbai Mountains during the LGM was 6.6–9.0 °C lower than today's, and was the principal factor controlling the growth of glaciers. There is a difference in the climate change in monsoon-influenced mountains during the LGM, and this difference may be related to the precipitation in the mountains. [ABSTRACT FROM AUTHOR]

An extreme high-temperature event occurred in North China on 22 June 2023, with the maximum temperature reaching 41.8 °C. The high-temperature centers preferentially occurred at the foothills of the Taihang and Yanshan Mountains, indicating an important role of the underlying orography. In the present work, we study the orographic effects of this extreme high-temperature event according to high-resolution numerical simulations using the Weather Research and Forecasting model. The results show that the presence of the mountains in North China contributed notably to the high-temperature event, which can enhance the 2 m air temperature by up to 3 °C. In the daytime, the enhancement of temperature is primarily due to the diabatic heating of sensible heat flux at the terrain surface caused by solar shortwave radiation, whereas the well-known foehn effect has little contribution. Indeed, the dynamically forced downslope flow of foehn is totally suppressed by the upslope flow of the thermally driven mountain-plain circulation. In the nighttime, the sensible heat flux at the terrain surface changes to weakly negative, given the cooling of land surface longwave radiation. As a result, the enhancement of near-surface temperature at the terrain foothill is dominated by the adiabatic warming of downslope flow. Yet, the near-surface temperature far away from the mountain is enhanced by the subsidence warming of a synoptic anomalous anti-cyclone, which is induced by the diabatic heating over the mountains in the daytime. These findings help improve the understanding of the thermal and dynamical effects of orography on the occurrence of high-temperature events. [ABSTRACT FROM AUTHOR]

Oscillations in global modes of variability (MoVs) form global teleconnections that affect regional climate variability and modify the potential for severe and damaging weather conditions. Understanding the link between certain MoVs and regional climate can improve the ability to more accurately predict environmental conditions that impact human life and health. In this study, we explore the connection between different MoVs, including the Arctic oscillation (AO), Eurasian teleconnection, Indian Ocean dipole (IOD), North Atlantic oscillation (NAO), and El Niño southern oscillation (Nino34), with winter and summer climates in the High Mountain Asia (HMA) region, including geopotential height at 250 hPa (z250), 2 m air temperature (T2M), total precipitation (PRECTOT), and fractional snow cover area (fSCA). Relationships are explored for the same monthly period between the MoVs and the climate variables, and a lagged correlation analysis is used to investigate whether any relationship exists at different time lags. We find that T2M has a negative correlation with the Eurasian teleconnection in the Inner Tibetan Plateau and central China in both winter and summer and a positive correlation in western China in summer. PRECTOT has a positive correlation with all MoVs in most regions in winter, especially with the IOD, and a negative correlation in summer, especially with the Eurasian teleconnection. Snow cover in winter is positively correlated with most indices throughout many regions in HMA, likely due to wintertime precipitation also being positively correlated with most indices. Generally, the AO and NAO show similar correlation patterns with all climate variables, especially in the winter, possibly due to their oscillations being so similar. Furthermore, the AO and NAO are shown to be less significant in explaining the variation in HMA climate compared to other MoVs such as the Eurasian teleconnection. Overall, our results identify different time windows and specific regions within HMA that exhibit high correlations between climate and MoVs, which might offer additional predictability of the MoVs as well as of climate and weather patterns in HMA and throughout the globe. [ABSTRACT FROM AUTHOR]

This study employs computational fluid dynamics to analyze the natural ventilation conditions of university student dormitories in the northeastern region of China under various outdoor wind directions, wind speeds, and temperature conditions. By separately simulating room natural ventilation efficiency under four different outdoor wind speeds (1.5 m/s, 3.3 m/s, 5.4 m/s and 7.9 m/s) at different outdoor temperatures (−10 °C, 0 °C, 10 °C and 20 ℃), curves of indoor pollutant removal rates (VOA-Time) are established for different wind directions. The study also determines the minimum ventilation time required for rooms under different environmental conditions (TVOA=70%). The data indicate that, despite the promotion of ventilation efficiency with increasing wind speed or indoor-outdoor temperature difference, the wind direction determines the extent to which these factors enhance room ventilation efficiency. Furthermore, there are corresponding mathematical relationships between TVOA=70%, outdoor temperature, wind speed, and different wind directions, allowing for predictions related to the rate of indoor carbon dioxide change. The research findings will assist students in formulating more effective ventilation strategies under complex outdoor environmental conditions. [ABSTRACT FROM AUTHOR]

The applications of conventional heat pipes have been hindered by a few weaknesses, such as the low heat recovery effectiveness, the cross-pollution of fresh and exhaust air, and the difficult switch modes between winter and summer working conditions. In order to find solutions for those problems, a three-dimensional heat pipe exchanger was developed, and an experimental platform was built to test the heat recovery effectiveness of this heat pipe exchanger under different working conditions. Moreover, the operating performances of the three-dimensional heat pipe exchanger unit were monitored throughout one year in a hospital located in the hot summer and cold winter region of China. The field measurement results indicated that the heat recovery effectiveness could be effectively improved by reducing the air volume and the up-wind speed, increasing the cold air and hot air inlet temperature, and increasing the rows of pipes. According to optimizing the structure and operation parameters, the heat recovery efficiencies of the three-dimensional heat pipe exchanger increased by 65~85%. The recommended operation parameters of the three-dimensional heat pipe exchanger in winter and summer for indoor exhaust air temperature were 20 ± 2 °C and 22 ± 2 °C, respectively. The heat recovery effectiveness could reach up to 66% and 64.5% when the indoor and outdoor air temperature differences were higher than 11 °C and 5 °C in winter and summer, respectively. This study provides effective, reliable, and easily implementable methods for the application of three-dimensional heat pipe heat recovery devices in building HVAC systems. It offers guidance for the future design of heat pipe heat recovery devices. [ABSTRACT FROM AUTHOR]

A passive microwave instrument will be carried by China's geostationary microwave satellite. A microwave hyper-spectral band included by the instrument ranges from 52.6 to 57.3 GHz, and totally has 89 channels in this spectral domain. The design of the hyper-spectral band is described from the aspects of scientific objectives and specifications. The weighting functions for each channel are calculated utilizing radiative transfer simulations under clear sky conditions. Then, the information content as well as the degree of freedom for signal are computed and analyzed to characterize this hyper-spectral sounding for atmospheric temperature profiling. Both the vertical distribution of the weighting functions and the width of retrieval averaging kernels indicate that the hyper-spectral band can provide more denser sampling for atmospheric temperature. The information content for the hyper-spectral band is approximately 46% higher than that of the ATMS-type channel 3 to 15, indicating that hyper-spectral measurement can improve the accuracy of retrieval. The most informative channels mainly locate near 57 GHz, having good consistency with the existing channels. The height range where the retrieval using the hyper-spectral observations is sensitive to the true profile, begins from about 800 to 1 hPa. Some channels can be considered as alternatives to each other since they have very similar information content and weighting functions. These results are expected to provide a valuable reference for future applications of the microwave hyper-spectral measurements. [ABSTRACT FROM AUTHOR]