Search

Currently, the main solution for braking systems for underground electric trackless rubber-tired vehicles (UETRVs) is traditional hydraulic braking systems, which have the disadvantages of hydraulic pressure crawling, the risk of oil leakage and a high maintenance cost. An electro-mechanical-braking (EMB) system, as a type of novel brake-by-wire (BBW) system, can eliminate the above shortcomings and play a significant role in enhancing the intelligence level of the braking system in order to meet the motion control requirements of unmanned UETRVs. Among these requirements, the accurate control of clamping force is a key technology in controlling performance and the practical implementation of EMB systems. In order to achieve an adaptive clamping force control performance of an EMB system, an optimized fuzzy proportional-integral-differential (PID) controller is proposed, where the improved fuzzy algorithm is utilized to adaptively adjust the gain parameters of classic PID. In order to compensate for the deficiency of single-close-loop control and adjusting the brake gap automatically, a cascaded three-closed-loop control architecture with force/position switch technology is established, where a contact point detection method utilizing motor rotor angle displacement is proposed via experiments. The results of the simulation and experiments indicate that the clamping force response of the proposed multi-close-loop Variable Universe Fuzzy–PID (VUF-PID) controller is faster than the multi-closed-loop Fuzzy–PID and cascaded three-close-loop PID controllers. In addition, the chattering of braking force can be suppressed by 17%. This EMB system may rapidly and automatically finish the operation of the overall braking process, including gap elimination, clamping force tracking and gap recovery, which can obviously enhance the precision of the longitudinal motion control of UETRVs. It can thus serve as a BBW actuator of mine autonomous driving electric vehicles, especially in the stage of braking control. [ABSTRACT FROM AUTHOR]

It is urgent for automated electric transportation vehicles in coal mines to have the ability of self-adaptive tracking target constant deceleration to ensure stable and safe braking effects in long underground roadways. However, the current braking control system of underground electric trackless rubber-tired vehicles (UETRVs) still adopts multi-level constant braking torque control, which cannot achieve target deceleration closed-loop control. To overcome the disadvantages of lower safety and comfort, and the non-precise stopping distance, this article describes the architecture and working principle of constant deceleration braking systems with an electro-mechanical braking actuator. Then, a deceleration closed-loop control algorithm based on fuzzy neural network PID is proposed and simulated in Matlab/Simulink. Finally, an actual brake control unit (BCU) is built and tested in a real industrial field setting. The test illustrates the feasibility of this constant deceleration control algorithm, which can achieve constant decelerations within a very short time and maintain a constant value of − 2.5   m / s 2 within a deviation of ± 0.1   m / s 2 , compared with the deviation of 0.11   m / s 2 of fuzzy PID and the deviation of 0.13   m / s 2 of classic PID. This BCU can provide electric and automated mine vehicles with active and smooth deceleration performance, which improves the level of electrification and automation for mine transport machinery. [ABSTRACT FROM AUTHOR]