Search

Coffee residues (CRs) were gasified using a laboratory-scale fluidized bed gasifier with an air/steam mixture as the carrier gas. The gasification was conducted at an equivalence ratio (ER) of 0.3, and different operation temperatures (700, 800, and 900 °C) and steam-to-biomass (S/B) ratios (0, 0.75, and 1.5) were applied. Increasing temperature without steam boosted H 2 and CO concentrations in producer gas, raising lower heating value (LHV) and cold gas efficiency (CGE) through endothermic reactions like Boudouard, tar cracking, and water-gas formation. At 900 °C, gas had LHV of 3.76 MJ/Nm 3 and CGE of 22.47%. It was elevating temperature from 700 to 900 °C and S/B ratio to 1.5 raised H 2 and CO concentrations from 2.04 to 8.60% and from 9.56 to 11.8%, respectively. This also increased LHV from 2.23 to 3.89 MJ/Nm 3 and CGE from 11.28 to 25.08%. The steam gasification reaction was found to increase the H 2 concentration and was thus considered effective in converting CRs to syngas and increasing energy production. Overall, the study successfully demonstrated the feasibility of steam gasification as a means of converting coffee residues to syngas and increasing energy production. The results also highlighted the importance of operating temperature and S/B ratio in improving the gasification process., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Enterococcus faecalis is one of the bacteria that is commonly found in infected root canals, necrotic pulp and failure of root canal treatment, while Phorphyromonas gingivalis play a role in inducing periodontitis. Both bacteria can enter the blood circulation and lead to risk factors for systemic disease such as atherosclerosis. ChKM is the most widely used root canal sterilization, and also 0.2 % chlorhexidine mouthwash for long-term usage. It can destroy a potent cell and is allergenic. Developing an alternative material for root canal sterilization and mouthwash for plaque control is necessary. One of the alternative natural products that is predicted to have antibacterial effect is robusta coffee husk peels. This research aimed to investigate the antibacterial activity of robusta coffee (Coffea canephora) husk extract on E. faecalis and P. gingivalis. The robusta coffee husk was extracted using the maceration process with 96 % ethanol as the solvent. This research is an experimental laboratory, was tested by disk diffusion methods (Kirby-Baurer) using Gram-positive E. faecalis ATCC 29212 and Gram-negative P. gingivalis ATCC 33277 consisted of 6 groups: Aquadest as a negative control group, ChKM (for E.facecalis) and 0.2 % chlorhexidine (for P. gingivalis) as positive control, 4 treatment groups of coffee robusta husk extract with different concentrations there were 250, 250, 500, 750 and 1,000 mg/mL. The antibacterial effect was examined by measuring the clear zone around the disk paper. The results of this study proved the presence of antibacterial activity of coffee robusta husk extract against E. faecalis and P. gingivalis. The higher concentrations followed with a greater antibacterial effect. [ABSTRACT FROM AUTHOR]

Copyright of Historia Agraria is the property of Historia Agraria and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Coffee husks are the main by-product of the coffee industry and have been traditionally discarded in the environment or used as fertilizers. However, recent studies have shown that coffee husks have bioactive compounds, such as phenolics and fiber-bound macro antioxidants, offering a range of potential health benefits. This study evaluated the antioxidant capacity, cytoprotective/cytotoxic properties, and stimulatory effects on the relative abundance of selected intestinal bacterial populations of individuals with diabetes of organic coffee husks. Organic coffee husk had good antioxidant capacity, maintained under simulated gastric conditions, with more than 50% of antioxidant capacity remaining. Organic coffee husk exerted cytoprotective properties in Caco-2 cells, indicating that cellular functions were not disturbed, besides not inducing oxidation. Overall, organic coffee husk promoted positive effects on the abundance of distinct intestinal bacterial groups of individuals with diabetes during in vitro colonic fermentation, with a higher relative abundance of Bifidobacterium spp., indicating the availability of components able to reach the colon to be fermented by intestinal microbiota. Organic coffee husk could be a circular material to develop new safe and pesticide-free functional ingredients with antioxidant and potential beneficial effects on human intestinal microbiota., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Roasting is necessary for bringing out the aroma and flavor of coffee beans, making coffee one of the most consumed beverages. However, this process also generates a series of toxic compounds, including acrylamide and furanic compounds (5-hydroxymethylfurfural, furan, 2-methylfuran, 3-methylfuran, 2,3-dimethylfuran, and 2,5-dimethylfuran). Furthermore, not much is known about the formation of these compounds in emerging coffee formulations containing alcohol and sugars. Therefore, this study investigated the effect of roasting time and degree on levels of acrylamide and furanic compounds in arabica coffee using fast and slow roasting methods. The fast and slow roasting methods took 5.62 min and 9.65 min, respectively, and reached a maximum of 210 °C to achieve a light roast. For the very dark roast, the coffee beans were roasted for 10.5 min and the maximum temperature reached 245 °C. Our findings showed that the levels of acrylamide (375 ± 2.52 μg kg -1 ) and 5-HMF (194 ± 11.7 mg kg -1 ) in the slow-roasted coffee were 35.0 % and 17.4 % lower than in fast-roasted coffee. Furthermore, light roast coffee had significantly lower concentrations of acrylamide and 5-HMF than very dark roast, with values of 93.7 ± 7.51 μg kg -1 and 21.3 ± 10.3 mg kg -1 , respectively. However, the levels of furan and alkylfurans increased with increasing roasting time and degree. In this study, we also examined the concentrations of these pollutants in new coffee formulations consisting of alcohol-, sugar-, and honey-infused coffee beans. Formulations with honey and sugar resulted in higher concentrations of 5-HMF, but no clear trend was observed for acrylamide. On the other hand, formulations with honey had higher concentrations of furan and alkylfurans. These results indicate that optimizing roasting time and temperature might not achieve the simultaneous reduction of all the pollutants. Additionally, sugar- and honey-infused coffee beans are bound to have higher furanic compounds, posing a higher health risk., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Background: The association between coffee and caffeine intake and the risk of COPD and lung function has not been thoroughly discussed in Americans, with subgroup and threshold effects remaining unclear., Objectives: This study investigated the association between coffee and caffeine consumption and the risk of chronic obstructive pulmonary disease (COPD) as well as lung function utilizing data from the NHANES 2007-2012., Methods: We assessed the associations of coffee and caffeine consumption with the risk of COPD and lung function parameters, including FEV1 and FVC, adjusting for common demographic and disease characteristics in a cross-sectional analysis of NHANES data., Results: A total of 9763 participants were included in the study, and 592 were diagnosed with COPD. Multivariate regression models revealed positive associations between coffee and caffeine consumption and the risk of COPD and lung function. Subgroup analyses stratified by sex, DM, hypertension status, and smoking habits identified potential effect modifiers as well as inflection points from threshold effect examinations., Conclusions: The results of this cross-sectional study indicated significant positive correlations between coffee and caffeine consumption and the risk of COPD. Additionally, positive correlations between exposure variables and FEV1 and FVC were detected. Among the stratification factors, smoking status exhibited the most potential for modifying effects. Future practices and research are needed to validate the results and explore the underlying mechanisms., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

In the coffee industry, the use of natural coffee extracts with differentiated attributes is desirable to drive new product development. This study evaluates the impact of ultrafiltration membrane processing on the sensory, metabolic, and physicochemical attributes of four commercially available coffee extracts: cold brew, lightly roasted, freeze concentrated and evaporated standard. The sensory analysis revealed an increase in acidity in the permeate across all extracts, with the most significant profile changes observed in the lightly roasted evaporated and evaporated extracts, accompanied by an enhancement of fruity and floral attributes. Furthermore, the permeate showed reduced total dissolved solids, while the caffeine concentration increased. Metabolomic analysis highlighted key coffee-related metabolites like cinnamic and coumaric acids, explaining observed variations due to their passage through the membrane. Our findings emphasize the potential of permeate as a coffee-based ingredient for ready-to-drink products development, providing a unique coffee experience with organoleptic profiles distinct from traditional beverages., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

This paper presents a study that assesses the application of chemometrics for classifying coffee samples in a quality control context. High-resolution and accurate mass measurements were utilized as input for pixel-based orthogonal partial least squares discriminant analysis (OPLS-DA) models. The compositional data were acquired through a fully automated workflow combining headspace solid-phase microextraction and gas chromatography-high-resolution mass spectrometry (GC-HRMS) using an FT-Orbitrap® mass analyzer. A workflow centered on accurate mass measurements was successfully utilized for group-type analysis, offering an alternative to methods relying solely on MS similarity searches. The predictive models underwent thorough evaluation, demonstrating robust multivariate classification performance. Five key coffee attributes, bitterness, acidity, body, intensity, and roasting level were successfully predicted using GC-HRMS data. The results revealed strong predictive accuracy across all models, ranging from 88.9 % (bitterness) to 94.4 % (roasting level). This study represents a significant advancement in automating methods for coffee quality control, notably increasing the predictive ability of the models compared to existing literature., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Recently some major safety concerns have been raised on organic contaminants in widely consumed plants such as coffee. Hence, this study aimed to develop specifically optimized methods for determining organic contaminants, such as pesticides and polychlorinated biphenyls (PCBs), in coffee using GC-MS/MS and LC-MS/MS. QuEChERS method was used as a base extraction method, and 27 experiments were studied using design of experiments with categorical variables (extraction buffers, cleanup sorbents, and coffee roasting degree) to find the optimum method for each matrix type. The optimum method for green coffee was acetate buffer and chitosan for clean-up, while no-buffer extraction and the PSA + C18 method were ideal for light and dark-roasted coffee. The optimized methods were validated in accordance with SANTE/11312/2021. Furthermore, ten real samples (4 green, and 6 roasted) from the markets were analysed; ortho-phenylphenol was found in all the roasted coffee samples, and carbendazim was found in one green coffee sample., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this research, spent coffee grounds (SCG) are converted into a highly valuable porous adsorbent which removes chromium (VI) from wastewater with high efficiency. A set of nine Spent Coffee Ground Activated Carbon (SCG-AC) adsorbent samples were synthesized, by varying key parameters including pyrolysis temperature (400, 600 °C), pyrolysis duration (1 and 2 h), and the impregnation ratio of the activating agent, KOH (ranging from 0:1 to 2:1). Characterizations of these adsorbent samples were conducted by advanced analytical tools including SEM, EDX, XRD, FTIR, TGA, and BET. Furthermore, we carried out adsorption studies, exploring the effects of temperature and dosage variations. Additionally, point zero charge experiments and desorption studies were carried out to further understand the adsorption process. The outcomes of our investigation demonstrate the successful synthesis of these spent coffee ground-derived adsorbents, with a yield of up to 34%. Notably, these adsorbents exhibited high efficiency in extracting chromium (VI) from water, with removal efficiencies ranging from 75% to 100%. The adsorption isotherms revealed the Langmuir model to be the most fitting descriptor of the adsorption behavior. Moreover, a thermodynamics study revealed the process to be endothermic in nature which furthers our understanding of the underlying mechanisms. Importantly, our cost assessment shows the economic advantage of the synthesized adsorbent over commercial counterparts such as zeolite, making it a competitive choice for real-world applications. In summation, the study not only introduces an innovative and sustainable utilization of spent coffee grounds but also delivers an in-depth exploration of the synthesized adsorbent's ability in chromium (VI) removal. Our holistic approach, encompassing thorough experimentation, characterization, and economic evaluation, solidifies the significance of this research in tackling environmental concerns and propelling advancements in wastewater treatment methodologies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Coffee beverage is a source of dietary fiber composed by arabinogalactans, which can also be associated to proteins and phenolic compounds, originating melanoidins. Human colonic in vitro fermentations of coffee fractions, one rich in melanoidins (Mel) and the other in its parental polysaccharide arabinogalactans (AG), were performed in order to evaluate the metabolites produced by microbiota, namely short-chain fatty acids (SCFA), phenolic compounds, and bile acids. After 48 h of fermentation, a higher fermentability of the carbohydrate fraction of AG (62 %) than that of Mel (27 %) was observed, resulting in a SCFA content of 63 mM and 22 mM, respectively. Supplementation with AG and Mel fractions decreased the acetate:propionate ratio from 4.7 (in the absence of coffee fractions) to 2.5 and 3.5, respectively, suggesting a potential inhibition of HMG-CoA reductase, a rate-limiting enzyme for cholesterol synthesis. The fermentation of coffee fractions yielded dihydroferulic and dihydrocaffeic acids, known to have antioxidant properties. In the presence of Mel, it was observed a decrease (from 0.25 to 0.16 mg/mL) in the production of secondary bile acids, whose high content is associated to the development of several diseases, such as colorectal cancer, neurodegenerative and cardiovascular., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Solar-driven artificial photosynthesis offers a promising avenue for hydrogen peroxide (H 2 O 2 ) generation, an efficient and economical replacement for current methods. The efficiency and selectivity hurdles of the two-electron oxygen reduction reaction (ORR) in solar-to- H 2 O 2 conversion are substantial barriers to large scale production. In this manuscript, a simple biomass-assisted synthesis was performed to produce oxygen-enriched carbon quantum dots (OE-CQDs) from spent coffee waste, acting as an efficient photocatalyst for solar-powered H 2 O 2 production. OE-CQDs can stabilize and store light-generated electrons effectively, boosting charge separation and enhancing photocatalytic performance with longevity. The maximal photocatalytic H 2 O 2 production was achieved viz the utilization of OE-CQDs with generation rate of 356.86 μmol g -1 h -1 by retaining 80% activity without any external sacrificial donors. The outstanding performance of synthesized OE-CQDs under light exposure at wavelength (λ) of 280 nm has been ensured by the quantum yield value of 9.4% upon H 2 O 2 generation. The combinatorial benefits of OE-CQDs with their authentic crystalline structure and oxygen enrichment, is expected to be enhancing the ORR activity through accelerating charge transfer, and optimizing oxygen diffusion. Consequently, our eco-friendly method holds considerable promise for creating highly efficient, metal-free photocatalysts for artificial H 2 O 2 production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Studies on the association between coffee consumption and risk of lung cancer have been conflicting. The aim of this study was to systematically review the current evidence on the association between coffee consumption and risk of lung cancer and to quantify this association by performing a meta-analysis. A comprehensive systematic search was performed on online databases up to July 2023 investigating the association between coffee consumption and risk of lung cancer. All prospective cohort studies reporting odds ratios (ORs), rate or risk ratios (RRs), or hazard ratios (HRs) and 95% confidence intervals (CIs) in this context were included. The overall effect size was calculated using the random-effects model and statistical between-studies heterogeneity was examined using Cochrane's Q test and I 2 . A total of 14 prospective cohort studies were included in this systematic review and meta-analysis. We found a significant positive association between coffee consumption and risk of lung cancer (RR: 1.28; 95% CI: 1.12, 1.47). This association remained significant when we included a pooled analysis paper and excluded 5 cohort studies (RR: 1.37; 95% CI: 1.12, 1.66). We observed no proof of significant publication bias using Egger's test (P = 0.58). Moreover, dose-response analysis showed that each one cup/day increase in coffee consumption was related with a 6% higher lung cancer risk (RR: 1.06; 95% CI: 1.03, 1.09). In conclusion, we found a significant positive association between coffee consumption and risk of lung cancer., (© 2024. The Author(s).)

Due to the constraints of the COVID-19 pandemic, conducting sensory evaluations requiring direct interactions became challenging. In response, researchers have been motivated to devise non-face-to-face testing methods as alternatives. This study aimed to compare two non-face-to-face home-use tests (HUT) with the traditional face-to-face central location test (CLT). Both HUTs involved online recruitment and sample delivery to participants' homes. One HUT provided a written protocol with no direct interaction (contactless HUT; C-HUT), whereas the other included an online meeting with a researcher for live guidance (online HUT; O-HUT). Four coffee samples were evaluated on the basis of liking and sensory and emotional attributes. The comparison between CLT and O-HUT showed RV coefficients of 0.92, 0.93, and 0.98 (P < 0.05) for liking and sensory and emotional attributes, respectively. In addition, based on the RV coefficient, the CLT results showed a significantly greater similarity to those of O-HUT compared to those of C-HUT. The O-HUT also outperformed the C-HUT in its ability to significantly discriminate between samples. Hence, real-time interactions between researchers and participants, as facilitated by O-HUT, may be more suitable in certain scenarios compared to C-HUT, which relies solely on a written protocol. Overall, these findings suggest that C-HUT and O-HUT are suitable methods for collecting sensory data and overcoming geographic and face-to-face contact limitations, providing greater flexibility, and reducing the time and cost associated with traditional sensory evaluations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Manufacturing biodegradable lignocellulosic films from spent coffee grounds (SCG) as an alternative to commercial plastics is a viable solution to address plastic pollution. Here, the biodegradable lignocellulosic films from SCG were fabricated via a sequential alkaline treatment and ionic liquid-based dissolution process. The alkaline treatment process could swell the cell wall of SCG, change its carbohydrates and lignin contents, and enhance its solubility in ionic liquids. The prepared SCG films with different lignin contents exhibited outstanding UV blocking capability (42.07-99.99 % for UVB and 20.96-99.99 % for UVA) and light scattering properties, good surface hydrophobicity (water contact angle = 63.2°-88.7°), enhanced water vapor barrier property (2.28-6.79 × 10 -12  g/m·s·Pa), and good thermal stability. Moreover, the SCG films exhibit excellent mechanical strength (50.10-81.56 MPa, tensile strength) and biodegradability (fully degraded within 30 days when buried in soil) compared to commercial plastic. The SCG films represent a promising alternative that can replace non-biodegradable plastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Catalytic esterification of acid-rich coffee waste-derived bio-oil was performed using sulfonated metal oxide catalysts (Al 2 O 3 , MgO, ZrO 2 , and TiO 2 ) and ethanol to produce fatty acid alkyl esters. The potential of the sulfonated catalysts for esterification decreased in the following order: Ti-SO 4  > Zr-SO 4  > Al-SO 4  > Mg-SO 4 . Particularly, Ti-SO 4 and Zr-SO 4 resulted in 91.2 % (peak area %) and 85.2 % esters, respectively. This is attributed to the contributions of well-dispersed Brønsted acid sites created by -SO 3 H functional groups, additional Lewis acid sites formed by Ti and Zr oxides, and their appropriate pore size. Compared with HCl and H 3 PO 4 , the use of H 2 SO 4 for TiO 2 treatment significantly enhanced ester formation. When using Ti-SO 4 , increasing the catalyst-to-feedstock ratio (1/2 ∼ 1/10) significantly increased the esters' selectivity (38.7 %∼94.7 %). Ethanol utilization caused a superior selectivity for esters than methanol, while the increasing temperature favored ester production. This study proposes an eco-friendly and practical method for biodiesel generation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Copyright of Taiwan Agricultural Research is the property of Taiwan Agricultural Research Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The reality for conservation of biodiversity across our planet is that all ecosystems are modified by humans in some way or another. Thus, biodiversity conservation needs to be implemented in multifunctional landscapes. In this paper we use a fascinating coffee-dominated landscape in southwest Ethiopia as our lens to derive general lessons for biodiversity conservation in a post-wild world. Considering a hierarchy of scales from genes to multi-species interactions and social-ecological system contexts, we focus on (i) threats to the genetic diversity of crop wild relatives, (ii) the mechanisms behind trade-offs between biodiversity and agricultural yields, (iii) underexplored species interactions suppressing pest and disease levels, (iv) how the interactions of climate change and land-use change sometimes provide opportunities for restoration, and finally, (v) how to work closely with stakeholders to identify scenarios for sustainable development. The story on how the ecology and evolution of coffee within its indigenous distribution shape biodiversity conservation from genes to social-ecological systems can inspire us to view other landscapes with fresh eyes. The ubiquitous presence of human-nature interactions demands proactive, creative solutions to foster biodiversity conservation not only in remote protected areas but across entire landscapes inhabited by people., (© 2024. The Author(s).)

Specialty coffee beans are those produced, processed, and characterized following the highest quality standards, toward delivering a superior final product. Environmental, climatic, genetic, and processing factors greatly influence the green beans' chemical profile, which reflects on the quality and pricing. The present study focuses on the assessment of eight major health-beneficial bioactive compounds in green coffee beans aiming to underscore the influence of the geographical origin and post-harvesting processing on the quality of the final beverage. For that, we examined the non-volatile chemical profile of specialty Coffea arabica beans from Minas Gerais state, Brazil. It included samples from Cerrado (Savannah), and Matas de Minas and Sul de Minas (Atlantic Forest) regions, produced by two post-harvesting processing practices. Trigonelline, theobromine, theophylline, chlorogenic acid derivatives, caffeine, caffeic acid, ferulic acid, and p-coumaric acid were quantified in the green beans by high-performance liquid chromatography with diode array detection. Additionally, all samples were roasted and subjected to sensory analysis for coffee grading. Principal component analysis suggested that Cerrado samples tended to set apart from the other geographical locations. Those samples also exhibited higher levels of trigonelline as confirmed by two-way ANOVA analysis. Samples subjected to de-pulping processing showed improved chemical composition and sensory score. Those pulped coffees displayed 5.8% more chlorogenic acid derivatives, with an enhancement of 1.5% in the sensory score compared to unprocessed counterparts. Multivariate logistic regression analysis pointed out altitude, ferulic acid, p-coumaric acid, sweetness, and acidity as predictors distinguishing specialty coffee beans obtained by the two post-harvest processing. These findings demonstrate the influence of regional growth conditions and post-harvest treatments on the chemical and sensory quality of coffee. In summary, the present study underscores the value of integrating target metabolite analysis with statistical tools to augment the characterization of specialty coffee beans, offering novel insights for quality assessment with a focus on their bioactive compounds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Acrylamide is an amide formed in the Maillard reaction, with asparagine as the primary amino acid precursor. The intake of large amounts of acrylamide has induced genotoxic and carcinogenic effects in hormone-sensitive tissues of animals. The enzime asparaginase is one of the most effective methods for lowering the formation of acrylamide in foods such as potatoes. However, the reported sensory outcomes for coffee have been unsatisfactory so far. This study aimed to produce coffees with reduced levels of acrylamide by treating them with asparaginase while retaining their original sensory and bioactive profiles. Three raw samples of Coffea arabica, including two specialty coffees, and one of Coffea canephora were treated with 1000, 2000, and 3000 ASNU of the enzyme. Asparagine and bioactive compounds (chlorogenic acids-CGA, caffeine, and trigonelline) were quantified in raw and roasted beans by HPLC and LC-MS, while the determination of acrylamide and volatile organic compounds was performed in roasted beans by CG-MS. Soluble solids, titratable acidity, and pH were also determined. Professional cupping by Q-graders and consumer sensory tests were also conducted. Results were analyzed by ANOVA-Fisher, MFA, PCA and Cluster analyses, with significance levels set at p ≤ 0.05. Steam treatment alone decreased acrylamide content by 18.4%, on average, and 6.1% in medium roasted arabica and canefora coffees. Average reductions of 32.5-56.0% in acrylamide formation were observed in medium roasted arabica beans when 1000-3000 ASNU were applied. In the canefora sample, 59.4-60.7% reductions were observed. However, steam treatment primarily caused 17.1-26.7% reduction of total CGA and lactones in medium roasted arabica samples and 13.9-22.0% in canefora sample, while changes in trigonelline, caffeine, and other evaluated chemical parameters, including the volatile profiles were minimal. Increasing enzyme loads slightly elevated acidity. The only sensory changes observed by Q-graders and or consumers in treated samples were a modest increase in acidity when 3000 ASNU was used in the sample with lower acidity, loss of mild off-notes in control samples, and increased perception of sensory descriptors. The former was selected given the similarity in chemical outcomes among beans treated with 2000 and 3000 ASNU loads., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This research designed and developed an ultrasonic reactor for a fast and on demand production of cold brew coffee, remarkably reducing the brewing time from 24 h to less than 3 min. The technology was engineered by utilizing resonance to induce ultrasonic waves around the walls of the brewing basket of an espresso machine. The sound transmission system comprised a transducer, a horn and a brewing basket. This arrangement transformed the coffee basket into an effective sonoreactor that injected sound waves at multiple points through its walls, thereby generating multiple regions for acoustic cavitation within the reactor. Furthermore, acoustic streaming induced greater mixing and enhanced mass transfer during brewing. The design was accomplished by modeling the transmission of sound, and acoustic cavitation. Brew characterization and chemical composition analysis was performed, considering factors such as pH, acidity, color, and the composition of caffeine, fatty acids, and volatiles. The efficiency of the extraction increased by decreasing the basket loading percentage (BLP). For instance, sonicating at 100 W doubled the extraction yield and caffeine concentration, from 15.05 % to 33.44 % at BLP = 33 %, and from 0.91 mg/mL to 1.84 mg/mL at BLP = 67 %, respectively. The total fatty acids increased from 1.16 mg/mL to 9.20 mg/mL, representing an eightfold increase, at BLP = 33 %. Finally, a sensory analysis was conducted to evaluate appearance, aroma, texture, flavor, and aftertaste, which demonstrated that coffee brewed for 1 and 3 min in the sonoreactor exhibited almost undistinguishable properties compared to a standard 24 h brewing without ultrasound., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Francisco J. Trujillo and Kourosh Kalantar-Zadeh has patent issued to NewSouth Innovations Pty Limited, Australian provisional patent application No. 2023903956 on December 6, 2023. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Coffee processing wastes, such as solid (pulp and husk) and wastewater, co-digested with industrial brewery wastewater, serve as excellent substrates for generating methane in the anaerobic digestion process. This study compared methane production using different compositions of cattle manure (CM) and granular sludge from an Upflow Anaerobic Sludge Blanket (UASB) reactor used in poultry wastewater treatment (GS). Four anaerobic batch reactors (500 mL) were assembled, A (50% CM and 50% GS), B (60% CM and 40% GS), C (70% CM and 30% of GS) and D (60% CM and 40% GS). Equal concentrations of substrates were added to all reactors: pulp and husk pretreated by hydrothermolysis (1 g L -1 ), coffee (10 g COD L -1 ) and brewery (1.5 g COD L -1 ) wastewaters. Assays A, B and C were supplemented with 2 g L -1 of yeast extract, except for assay D. The reactors were operated at 37 °C and pH 7.0. In assay B, the highest CH 4 production of 759.15 ± 19.20 mL CH 4 g -1 TS was observed, possibly favored by the synergistic interactions between cellulolytic bacteria Christensenellaceae&#95;R-7&#95;group and Methanosaeta archaea, as inferred by genes encoding enzymes related to acetoclastic methanogenesis (acetyl-CoA synthetase). Consequently, the electricity production potential of assay B (45614.08 kWh -1 year -1 ) could meet the energy demand of a farm producing coffee and beer, contributing to a positive energy balance concerning methane generation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Due to the lucrative nature of specialty coffees, there have been instances of adulteration where low-cost materials are mixed in to increase the overall volume, resulting in illegal profit. A widely used and recommended approach to detect possible adulteration is the application of one-class classifiers (OCC), which only require information about the target class to build the models. Thus, this work aimed to identify adulterations in specialty coffees with low-quality coffee using multielement analysis determined by ICP-MS and to evaluate the performance of one-class classifiers (dd-SIMCA, OCRF, and OCPLS). Therefore, authentic specialty coffee samples were adulterated with low-quality coffee in 25 % to 75 % (w/w) proportions. Samples were subjected to acid decomposition for analysis by ICP-MS. OCPLS method presented the best performance to detect adulterations with low-quality coffee in specialty coffees, showing higher specificity (SPE = 100 %) and reliability rate (RLR = 94.3 %)., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

This study investigates the effects of SCG embedded into biodegradable polymer blends and aimed to formulate and characterise biomass-reinforced biocomposites using spent coffee ground (SCG) as reinforcement in PHB/PLA polymer blend. The effect of SCG filler loading and varying PHB/PLA ratios on the tensile properties and morphological characteristics of the biocomposites were examined. The results indicated that tensile properties reduction could be due to its incompatibility with the PHB/PLA matrixSCG aggregation at 40 wt% content resulted in higher void formation compared to lower content at 10 wt%. A PHB/PLA ratio of 50/50 with SCG loading 20 wt% was chosen for biocomposites with treated SCG. Biological treatment of SCG using Phanerochaete chrysosporium CK01 and Aspergillus niger DWA8 indicated P. chrysosporium CK01 necessitated a higher moisture content for optimum growth and enzyme production, whereas the optimal conditions for enzyme production (50-55 %, w/w) differed from those promoting A. niger DWA8 growth (40 %, w/w). SEM micrographs highlighted uniform distribution and effective wetting of treated SCG, resulting in improvements of tensile strength and modulus of biocomposites, respectively. The study demonstrated the effectiveness of sustainable fungal treatment in enhancing the interfacial adhesion between treated SCG and the PHB/PLA matrix., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Tay Guan Seng reports financial support was provided by Universiti Sains Malaysia. Tay Guan Seng reports financial support and equipment, drugs, or supplies were provided by PMI Packaging Sdn. Bhd. Tay Guan Seng reports financial support and equipment, drugs, or supplies were provided by CY Enterprise Sdn. Bhd. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study investigates the potential of utilizing green chemically treated spent coffee grounds (SCGs) as micro biofiller reinforcement in Poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) biopolymer composites. The aim is to assess the impact of varying SCG concentrations (1 %, 3 %, 5 %, and 7 %) on the functional, thermal, mechanical properties and biodegradability of the resulting composites with a PHBV matrix. The samples were produced through melt compounding using a twin-screw extruder and compression molding. The findings indicate successful dispersion and distribution of SCGs microfiller into PHBV. Chemical treatment of SCG microfiller enhanced the interfacial bonding between the SCG and PHBV, evidenced by higher water contact angles of the biopolymer composites. Field Emission Scanning Electron Microscopy (FE-SEM) confirmed the successful interaction of treated SCG microfiller, contributing to enhanced mechanical characteristics. A two-way ANOVA was conducted for statistical analysis. Mass losses observed after burying the materials in natural soil indicated that the composites degraded faster than the pure PHBV polymer suggesting that both composites are biodegradable, particularly at high levels of spent coffee grounds (SCG). Despite the possibility of agglomeration at higher concentrations, SCG incorporation resulted in improved functional properties, positioning the green biopolymer composite as a promising material for sustainable packaging and diverse applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A significant and pressing issue revolves around the potential human exposure to endocrine disrupting chemicals (EDCs), which pose a substantial risk primarily through contaminated beverages. However, a comprehensive review for comparison of the migration rates of EDCs into these matrixes is currently lacking. This study reviews the beverages contamination with EDCs, including phthalates (PAEs), bisphenol A (BPA), hormone-like compounds, elements, and other organic EDCs. Also, the EDCs migration into milk and other dairy products, coffee, tea, and cold beverages related to their release from contact materials, preparation components, and storage conditions are briefly summarized. The data illustrates that besides the contamination of raw materials, the presence of EDCs associated with the type of food contact materials (FCMs)and their migration rate is increased with acidity, temperature, and storage time. The highest concentration of PAEs was detected from plastic and synthetic polymer films, while BPA strongly leaches from epoxy resins and canned metal. Furthermore, the presence of elements with endocrine disrupting characteristics was confirmed in cold beverages, soft drinks, hot drink and milk. Moreover, hormone-like compounds have been found to be released from coffee preparation components. Despite the few data about the migration rate of other EDCs including UV-stabilizers, surfactants, and antibacterial compounds into beverages, their presence was reported into milk, coffee, and different beverages, especially in packed samples. Studies on the EDCs leaching have primarily focused on PAEs and BPA, while other compounds require further investigation. Regardless, the possible risk that EDCs pose to humans through beverage consumption cannot be overlooked., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Incorporating spent coffee grounds into single-use drinking straws for enhanced biodegradability also raises safety concerns due to increased chemical complexity. Here, volatile organic compounds (VOCs) present in coffee ground straws (CGS), polylactic acid straws (PLAS), and polypropylene straws (PPS) were characterized using headspace - solid-phase microextraction and migration assays, by which 430 and 153 VOCs of 10 chemical categories were identified by gas chromatography - mass spectrometry, respectively. Further, the VOCs were assessed for potential genetic toxicity by quantitative structure-activity relationship profiling and estimated daily intake (EDI) calculation, revealing that the VOCs identified in the CGS generally triggered the most structural alerts of genetic toxicity, and the EDIs of 37.9% of which exceeded the threshold of 0.15 μg person -1 d -1 , also outnumbering that of the PLAS and PPS. Finally, 14 VOCs were prioritized due to their definite hazards, and generally higher EDIs or detection frequencies in the CGS. Meanwhile, the probability of producing safer CGS was also illustrated. Moreover, it was uncovered by chemical space that the VOCs with higher risk potentials tended to gather in the region defined by the molecular descriptor related to electronegativity or octanol/water partition coefficient. Our results provided valuable references to improve the chemical safety of the CGS, to promote consumer health, and to advance the sustainable development of food contact materials., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Objectives: To assess the effects of aging and bleaching procedures on the color stability and surface roughness of a new single-shade composite versus multi-shade composite resins., Methods: A single-shade composite resin (Charisma Diamond One, CDO) and 3 multi-shade composite resins (Tetric NCeram, Filtek Z350 XT, Clearfil Majesty Posterior) were tested. Thirty specimens of each material were subjected to one of the aging procedures respectively: immersion in distilled water (12 days/37 °C), immersion in coffee (12 days/37 °C), or water thermocycling (10,000 cycles/5-55 °C). All specimens underwent in-office bleaching after aging. Kruskal-Wallis tests and analysis of variance were used for statistical analysis (α=0.05)., Results: All materials exhibited a change of color (ΔE 00 ), translucency (RTP), whiteness (WI D ) and surface roughness parameters (Sa,Sv) after aging and bleaching procedures. CDO showed the highest ΔE 00 among all resins with the highest RTP value, regardless of the aging procedures. Immersion in coffee led to the significantly highest ∆E 00 values and lowest RTP values for nearly all resins. Positive ΔWI D 1 (WI D (bleaching)-WI D (baseline)) values were found in distilled water immersion and thermocycling groups, while negative ΔWI D 1 values were found in the coffee immersion group for all materials. Besides, positive ΔWI D 2 (WI D (bleaching)-WI D (aging)) values were found in all aging groups for nearly all materials. All materials showed an increasing trend in Sa and Sv after bleaching., Conclusions: CDO showed more pronounced discoloration than multi-shade composite resins. Although the whiteness of all resins increased after bleaching, none was completely restored in the coffee immersion group. Bleaching significantly increased the surface roughness of all materials., Clinical Significance: Charisma Diamond One is more susceptible to discoloration, which may affect its long-term success rate. Bleaching could partially reduce the color change of the composite resins but did not return them completely to their original state. The roughness of the resins increased after bleaching, prompting dentists to repolish them after bleaching., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The objective was to utilize spent coffee grounds (SCG) as charring agent to combine with ammonium polyphosphate (APP) to prepare flame retardant poly(lactic acid) (PLA) composites with improved toughness. PLA/APP-SCG and PLA/APP-SCG/KH560 composites were prepared, and silane coupling agent KH560 was applied to improve particle-matrix interfacial compatibility. The particle-matrix interface, char formation, flame retardancy, mechanical properties and fracture morphology of PLA composites were studied. Results showed that PLA/APP-SCG5% and PLA/APP-SCG20% passed UL-94 V-0 rating, and increase in charred residues was favorable for improving flame retardancy. Improved toughness was also obtained compared to PLA, attributed to debonding of APP from matrix under external force as well as plasticization effect of coffee oil contained in SCG. PLA/APP-SCG5%/KH560 and PLA/APP-SCG20%/KH560 showed smaller elongation at break and impact strength compared to PLA/APP-SCG5% and PLA/APP-SCG20%, respectively. The improved interfacial compatibility was unfavorable for debonding of APP from matrix, and both APP and SCG played the role of enhancing strength, thus decreasing toughness. PLA/APP-SCG/KH560 counterparts were actually set as parallel samples to prove that PLA/APP-SCG composites showed improved toughness with weak interfacial compatibility. This study has provided a practical approach to utilize bio-derived wastes as charring agent to prepare flame retardant PLA composites with enhanced toughness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The disposal of coffee shell waste on farmland, is a common practice that can causing the environmental and waste valuable resources. Carbonization has been identified as an effective method for transforming coffee shells into useful products that mitigate environmental pollution. Through the response surface methodology, the carbonization conditions of the coffee shells were optimized and its potential as a biochar-based slow-release urea fertilizer was explored. Experiments were conducted on coffee shell performance under varying carbonization conditions such as temperature (600-1000 °C), time (1-5 h), and heating rate (5-20 °C/min). The results indicated that the ideal urea adsorption was 56.3 mg/g, achieved under carbonization conditions of 2.83 h, 809 °C, and 15.3 °C/min. The optimal nutrient release rate within seven days was 45.4% under carbonization conditions of 3.19 h, 813 °C, and 15.0 °C/min. The infrared spectroscopy analysis indicates that carbonization conditions influenced the absorption peak intensity of coffee shell biochar, while the functional group types remain unchanged. The biochar exhibits diverse functional groups and abundant pores, making it a promising candidate for use as a biochar-based fertilizer material. Overall, the findings demonstrate an effective waste management approach that significantly reduces environmental pollutants while remediating pollution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Coffee is part of our daily lives since it is a drink with a symbolic value, both in our social relationships and as a stimulating drink. The main objective of this paper is to conduct a risk characterization of fluoride overexposure from the consumption of these beverages; for this purpose, in the present study, the fluoride concentration was determined in 80 samples of different brands of coffee commonly consumed in the Canary Islands, and the risk derived from their intake was then evaluated. Significant differences (p < 0.05) were found between the coffee brands soluble Nescafé Classic®, Saimaza®, Auchan®, Tirma® soft blend, and Hacendado® and the other analyzed brands. The brand that recorded the highest mean fluoride levels is "Hacendado descafeinado®" (0.308 mg/L). The problem with coffee is not the fluoride it contains but the fact that, according to the survey results, most coffee drinkers brew their coffee with tap water (over 51% of respondents use tap water). The results of the fluoride content in coffee prepared with tap water from the different areas of Tenerife in the Canary Islands (metropolitan, northern, and southern areas) have reported higher concentrations of fluoride: north (max. concentration found of 16.68 mg/L), south (max. concentration found of 8.47 mg/L) and metropolitan (max. concentration found of 4.73 mg/L). Coffee has not been identified as a risk of dietary overexposure to fluoride; however, the use of tap water for its brewing has been identified as a factor that considerably increases its concentration. Therefore, the use of bottled water is recommended, especially in regions such as the Canary Islands, which have high concentrations of fluoride in their water. [ABSTRACT FROM AUTHOR]

Aligning crop production with conservation initiatives has long been a topic of debate, with agricultural intensification threatening biodiversity across the globe. Shade-grown coffee allows farmers to preserve biodiversity by providing viable habitat, but its conservation value remains unclear. In this meta-analysis, we screened existing literature using the PRISMA protocol to compare the effect of three shade intensities on species diversity and individual abundance: sun, low shade (LS) and high shade (HS). Furthermore, we examine differences between taxa, within taxa and between regions to establish which species benefit most from shade and whether these benefits vary dependent on geographical location. Out of 1889 studies, we included 69 studies in the analysis, and performed random-effects meta-analyses and meta-regressions. Overall, we found that species diversity was significantly higher in HS when compared to sun and LS, and species diversity in LS tended to be higher than in sun. In each treatment, the species diversity of birds was higher in the higher shade treatment, i.e., HS and LS. In addition, mammal and epiphyte species diversity was higher in HS when compared to LS. Similarly, studies from Latin America showed significantly higher species diversity and abundance in shaded farms when compared to sun farms. Studies conducted in Africa detailed the opposite relationship, with abundance being significantly higher in less shaded systems, highlighting that land-use strategies must be region-specific. Moving forward, strategies to conserve biodiversity within coffee farms should: 1) account for region-specific variables; 2) end further encroachment; 3) maintain connectivity; and 4) optimise yield through prioritising faunal and floral diversity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The objective of this paper is to present the technical and feasibility analysis of an innovative mechanical recycling system for exhausted coffee capsules. This recycling process involved the sorting of spent coffee grounds (SGC) and the subsequent drying and melt-mixing of a portion of these grounds with the remaining capsule components, mainly composed of polypropylene (PP), along with optional virgin PP. These newly developed composite materials exhibited mechanical and rheological properties comparable or even surpassing those of virgin PP. They were also successfully utilized for the injection of new capsule shells, thus alignin with the principles of the circular economy. In addition to the technical aspects, this paper present a comprehensive Techno-Economic Analysis (TEA) of the proposed recycling processes, considering the inclusion of virgin PP (0-20 %) and the initial moisture content (M SGC ) of SGC(5-55 %) as varying factors. An industrial plant, designed to handle up to 190 million exhausted coffee capsules and produce up to 1500 tons of recycled compund was appropriately sized. The analysis revealed that processes are profitable across all examined scenarios and that the Net Present Value ranged between 800 k€ (for vPP = 20 % and M SGC  = 55 %) and 2000 k€ (for vPP = 0 % and M SGC  = 5 %)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Type 2 diabetes (T2D) is a growing health concern with an estimated 462 million people having been diagnosed worldwide. T2D is characterized by chronically elevated blood glucose and insulin resistance, which culminate in a diminished function of the β-cell mass in its later stages. This can be perpetuated by and result in inflammation, excess reactive oxygen species production, obesity, and the dysregulation of multiple cellular pathways. Many naturally occurring small molecules have been investigated in terms of their roles in modulating glucose homeostasis and β-cell function. Many of these compounds can be found in commonly used sources of food and drink. Interestingly, a correlation has been observed between coffee consumption and T2D incidence. However, the specific compounds responsible for this correlation and their mechanisms are still somewhat undetermined. This paper reviews recent research findings on the effects of several polyphenols that are either found in coffee or are metabolites of compounds found in coffee (enterodiol, enterolactone, matairesinol, secoisolariciresinol, kaempferol, quercetin, and chlorogenic acid) on glucose homeostasis and health complications associated with glucose dysregulation, with a special emphasis on their potential anti-diabetic effects. The factors that affect polyphenol content in coffee are also addressed.

Chrysanthemum is one of the most attractive flowering plants widely grown commercially worldwide. Having a good source of organic fertilizers plays an important role in meeting the increasing demand for these plants, which requires high-quality flowers and a high survival time for the longest period. The effect of nitrogen (N) coupled with spent coffee ground (SCG) at various levels (0.0, 2.5, 5.0, 7.5, 10.0°% w/w) was evaluated on growth performance and chemical components of the Chrysanthemum over two years in a pot scale. Overall, total dry matter (TDM) was significantly enhanced with N+ by 125 and 97°% over N- in the first and second years, respectively. SCG also enhanced TDM up to the highest level of application in the range of 27-98°% and 18-81°% over SCG (0.0°%) in the same years, respectively. The interaction effect between N and SCG was perfect on TDM, flower number, and flower dry weight. Similarly, total antioxidant activities when N and SCG were coupled together gave respective increments ranging from 11.8 to 45.9 U/g DW and from 2.1 to 15.9 U/g DW compared to N alone (5.8 and 0.9 U/g DW) in both leaves and flowers, respectively. Extracts of plant treated with N and 10°% SCG exhibited a higher content of rosmarinic, caffeic, chlorogenic, vanillic acids, and rutin in the leaves. SCG as a natural organic source is easy to obtain and is a practical and cost-effective solution to plant nutrition, which can be valuable for ornamental plants, especially when combined with nitrogen., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Due to growing environmental concerns for better waste management, this study proposes developing a composite aerogel using cellulose nanofibers (CNF) and spent coffee grounds (SCG) through an eco-friendly method for efficient methylene blue (MB) adsorption. Adding SCG to the CNF aerogel altered the physical properties: it increases the volume (4.14 cm 3 to 5.25 cm 3 ) and density (0.018 to 0.022 g/cm 3 ) but decrease the water adsorption capacity (2064 % to 1635 %). FTIR spectrum showed distinct functional groups in both all aerogels, showing hydroxyl, glyosidic bonds, and aromatic compounds. Additionally, SCG improved thermal stability of the aerogels. In term of adsorption efficacy, CNF-SCG40% aerogel as exceptionally well. According to Langmuir isotherm models, the adsorption of MB happened in a monolayer, with CNF-SCG40% showing a maximum adsorption capacity of 113.64 mg/g, surpassing CNF aerogel (58.82 mg/g). The study identified that the pseudo-second-order model effectively depicted the adsorption process, indicating a chemical-like interaction. This investigation successfully produced a single-use composite aerogel composed of CNF and SCG using an eco-friendly approach, efficiently adsorbing MB. By utilizing cost-effective materials and eco-friendly methods, this approach offers a sustainable solution for waste management, contributes to an eco-friendly industrial environment, and reduces production expenses and management costs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

A comprehensive study of 603 roasted arabica coffee samples using NMR fingerprinting and multivariate data analysis was performed to differentiate coffee samples according to their geographical origin and cultivation method. Both lipophilic and hydrophilic coffee metabolites were recorded using 1 H NMR spectroscopy, and principal component analysis followed by linear discriminant analysis (PCA-LDA) was applied. Coffee samples were fist differentiated according to their continents of origin followed by discrimination of coffee samples from Brazil, Ethiopia, and Colombia from coffee samples originating from another continent. Discrimination of coffee samples according to their continent of origin and additional assignment to the countries Brazil and Ethiopia were successful. However, an unambiguous separation of Colombian coffee samples from coffee samples of another continent (other than South America) was not possible. Also, differentiation of organically and conventionally produced coffee samples by using 1 H NMR and PCA-LDA was not achieved., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Recovering nutrients from waste for biological processes aligns with sustainability principles. This study aimed to convert spent coffee grounds (SCG) into valuable products, including fermentable sugars, volatile fatty acids (VFAs), yeast-based single-cell protein and biofuels. Alkaline pretreatment was conducted before enzymatic hydrolysis, in which the pretreated SCG was hydrolyzed with varying enzyme loadings (20-60 filter paper units (FPU)/g-solid) and solid loadings (3-15 % w/v). The hydrolyzed slurry was utilized for VFAs and hydrogen production, yielding high values of 0.66 g/g-volatile solids (VS) and 109 mL/g-VS, respectively, using an enzyme loading of 50 FPU/g-solid and a solid loading of 3 % (w/v). The derived VFAs were used to cultivate a newly isolated yeast, Candida maltosa KKU-ARY2, resulting in an accumulated protein content of 43.7 % and a biomass concentration of 4.6 g/L. This study highlights the conversion of SCG into essential components, emphasizing the benefits of waste utilization through cascade bioprocesses., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The objective of this study was to evaluate, during the drying of spent coffee grounds, the application of pretreatments with ethanol and the application of ultrasound assisting the refractive window (RW) drying, and to compare with convective drying by hot air (AC). The effect on the kinetics parameters of the Fick and Page models were evaluated, as well as on the content of total phenolics and antioxidant capacity. For AC drying, samples of spent ground coffee were prepared in the form of fixed rectangular beds 0.7 cm high, which were placed on polyester sheets and pretreated up to 10 times sprayed with ethanol, then dried by AC at 80 °C and 0.8 m/s. For RW drying, the samples prepared in the same way as for AC were used. For this case, the application of ethanol as pretreatment and the use of ultrasound during process were tested. As results, regardless of the conditions applied, drying by RW was up to 50 % faster, evidenced in the highest values of effective diffusivity (from the Fick model) and the kinetic parameter (from the Page model). Regarding the treatments applied and their effect on the drying kinetics, any treatment had a significant effect on AC drying. On the contrary, the strategies applied in RW drying had significant effects, both the application of pretreatment with ethanol as well as the application of ultrasound assisting the process accelerated the drying kinetics. However, the treatment with ethanol and RW drying was the one that best preserved the phenolic compounds and the antioxidant capacity in the samples. Therefore, these strategies could be a good option to improve RW drying by accelerating the process and preserving the bioactive compounds in the spent coffee grounds for subsequent utilization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study proposed an integrated and automated procedure to extract, separate, and quantify bioactive compounds from a coffee co-product by pressurized liquid extraction (PLE) coupled inline with solid phase extraction (SPE) and online with HPLC-PDA (PLE-SPE × HPLC-PDA). The efficiency of the two-dimensional system in performing real-time analysis was verified by comparing HPLC-PDA results acquired by the system (online) and carried out after the extract fraction collection (offline). Different flow rates (1.5 mL/min for 336 min, 2 mL/min for 246.4 min, and 2.5 mL/min for 201.6 min) were evaluated to optimize the extraction, separation, and analysis method by PLE-SPE × HPLC-PDA. Subcritical water at 125 °C and 15 min of static time allowed the highest extraction yields of caffeine and 5-caffeoylquinic acid (5-CQA). Caffeine was retained during the aqueous extraction in the SPE adsorbent and eluted from the column by exchanging the solvent for a hydroethanolic mixture. Thus, caffeine was separated from 5-CQA and other phenolic compounds, producing extracts with different compositions. The solvent flow rate did not have a significant effect (p-value ≥ 0.05) on the extraction, separation, and analysis (by online and offline methods) of 5-CQA. However, the online quantification of retained compounds in the SPE (i.e., caffeine) can underestimate concentration compared to offline analysis. Nevertheless, the results suggest that coupling of advanced techniques can be used to efficiently extract, separate, and analyze fractions of phenolic compounds, supplying an integrated method to produce high-added value ingredients for several applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

There is a growing demand for specialty coffee with more pleasant and uniform sensory perception. Wet fermentation could modulate and confer additional aroma notes to final roasted coffee brew. This study aimed to assess differences in volatile compounds and the intensities of sensory descriptors between unfermented and spontaneously fermented coffee using digital technologies. Fermented (F) and unfermented (UF) coffee samples, harvested from two Australia local farms Mountain Top Estate (T) and Kahawa Estate (K), with four roasting levels (green, light-, medium-, and dark-) were analysed using near-infrared spectrometry (NIR), and a low-cost electronic nose (e-nose) along with some ground truth measurements such as headspace/gas chromatography-mass spectrometry (HS-SPME-GC-MS), and quantitative descriptive analysis (QDA ®). Regression machine learning (ML) modelling based on artificial neural networks (ANN) was conducted to predict volatile aromatic compounds and intensity of sensory descriptors using NIR and e-nose data as inputs. Green fermented coffee had significant perception of hay aroma and flavor. Roasted fermented coffee had higher intensities of coffee liquid color, crema height and color, aftertaste, aroma and flavor of dark chocolate and roasted, and butter flavor (p < 0.05). According to GC-MS detection, volatile aromatic compounds, including methylpyrazine, 2-ethyl-5-methylpyrazine, and 2-ethyl-6-methylpyrazine, were observed to discriminate fermented and unfermented roasted coffee. The four ML models developed using the NIR absorbance values and e-nose measurements as inputs were highly accurate in predicting (i) the peak area of volatile aromatic compounds (Model 1, R = 0.98; Model 3, R = 0.87) and (ii) intensities of sensory descriptors (Model 2 and Model 4; R = 0.91), respectively. The proposed efficient, reliable, and affordable method may potentially be used in the coffee industry and smallholders in the differentiation and development of specialty coffee, as well as in process monitoring and sensory quality assurance., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: Coffee is one of the most consumed beverages in the world. Containing an abundance of bioactive molecules including polyphenols and flavonoids, the constituents of this beverage may exert antiproliferative, antioxidant and anti-inflammatory effects., Methods: We conducted a systematic review to summarise the available evidence on the anticancer effects of coffee constituents and their potential therapeutic use for oral squamous cell carcinoma (OSCC). Studies were identified through a comprehensive search of OVID MEDLINE, OVID EMBASE and Web of Science, including articles from any year up to 15 May 2023., Results: Of the 60 reviewed papers, 45 were in vitro, 1 was in silico and 8 were in vivo exclusively. The remaining studies combined elements of more than one study type. A total of 55 studies demonstrated anti-proliferative effects, whilst 12 studies also investigated migration and invasion of neoplastic cells. The constituents studied most frequently were quercetin and epigallocatechin gallate (EGCG), demonstrating various cytotoxic effects whilst also influencing apoptotic mechanisms in cancer cell lines. Dose-dependent responses were consistently found amongst the studied constituents., Conclusion: Whilst there was heterogeneity of study models and methods, consistent use of specific models such as SCC25 for in vitro studies and golden hamsters for in vivo studies enabled relative comparability. The constituents of coffee have gained significant interest over the last 30 years, particularly in the last decade, and present an area of interest with significant public health implications. Currently, there is a paucity of literature on utilization of active coffee constituents for the therapeutic treatment of oral cancers., (© 2023 The Authors. Journal of Oral Pathology & Medicine published by John Wiley & Sons Ltd.)

If a DNA sample collected in the field is old or degraded, short tandem repeat analysis is difficult to perform, a representative analysis method currently used for individual identification. Given that microorganisms exist everywhere and within the human body, in similar amounts to human cells, microbial analysis could be used to identify individuals even in cases in which human DNA-based identification is difficult. Research has demonstrated that the types of microorganisms within the human body differ depending on various internal or external factors, such as body part or bodily fluid type, lifestyle, geographical area of residence, sex, and age. In this study, we aimed to examine the relationship between lifestyle factors and the composition and diversity of the oral microbiome in individuals living in Korea. We collected 43 saliva samples from Korean individuals and analyzed the oral microbiome and its variations due to external factors, such as coffee consumption, drinking, and smoking. Linear discriminant analysis effect size revealed that Oribacterium, Campylobacter, and Megasphaera were abundant in coffee consumers, whereas Saccharimonadales, Clostridia, and Catonella were abundant in alcohol non-drinkers. We found increased levels of Stomatobaculum in the saliva of smokers, compared with that of non-smokers. Thus, our analysis revealed characteristic microorganisms for each parameter that was evaluated (coffee consumption, smoking, drinking). Consequently, our study provides insight into the oral microbiome in the Korean population and lays the foundation for developing the Korean Forensic Microbiome Database., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Coffee is one of the most consumed beverages worldwide. Espírito Santo is the largest Brazilian producer of conilon coffee, and invested in the creation of new cultivars, such as "Conquista ES8152", launched in 2019. Therefore, the present study aimed to evaluate the effects of maturation and roasting on the chemical and sensorial composition of the new conilon coffee cultivar "Conquista ES8152". The coffee was harvested containing 3 different percentages of ripe fruits: 60%, 80%, and 100%, and roasted at 3 different degrees of roasting: light, medium, and dark, to evaluate the moisture and ash content, yield of soluble extract, volatile compound profile, chlorogenic acid and caffeine content, and sensory profile. "Conquista ES8152" coffee has a moisture content between 1.38 and 2.62%; ash between 4.34 and 4.72%; and yield between 30.7 and 35.8%. Sensory scores ranged between 75 and 80 and the majority of volatile compounds belong to the pyrazine, phenol, furan, and pyrrole groups. The content of total chlorogenic acids was drastically reduced by roasting, with values between 2.40 and 9.33%, with 3-caffeoylquinic acid being the majority. Caffeine was not influenced by either maturation or roasting, with values between 2.16 and 2.41%. The volatile compounds furfural, 5-methylfurfural, and 2-ethyl-5-methylpyrazine were positively correlated with the evaluated sensory attributes and 5-methylfurfural was the only one significantly correlated with all attributes. Ethylpyrazine, furfuryl acetate, 1-furfurylpyrrole, 4-ethyl-2-methoxyphenol, and difurfuryl ether were negatively correlated. The stripping did not affect the quality and composition of this new cultivar, however, the roasting caused changes in both the chemical and sensorial profiles, appropriately indicated by the principal component analysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The purpose of this study was to determine the effect of Product Innovation and Price Perception on consumer purchasing decisions on the Coffee Online Platform Application Aerocoffeenery Soreang both partially and simultaneously. The population in this study were consumers and customers at Coffee Online Platform Application Aerocoffeenery Soreang, with a total of 100 samples. The sampling technique used in this study was a non-probability sampling technique. The method used in this research is Quantitative Method with the data collection technique used is interviews and distributing questionnaires to respondents. The data analysis technique used is multiple linear regression with the SPSS program. The results of the study concluded that: (1) Product Innovation has a positive and significant influence on Purchasing Decisions. (2) Price Perception has a positive and significant influence on Purchasing Decisions. (3) In simultaneous testing, Product Innovation and Price Perception have a positive and significant influence on purchasing decisions for consumers and customers of the Coffee Online Platform Application Aerocoffeenery Soreang. The magnitude of the influence of Product Innovation and Price Perception is indicated by the Adjusted R Field value of 74.8% and the remaining 26.2% is influenced by other variables not examined in this study. [ABSTRACT FROM AUTHOR]

Coffee is not merely a refreshing beverage but also invigorates people, provides relaxation, contributes to human health, and fosters closer social connections. Coffee is one of the most widely consumed beverages worldwide and the most traded commercial commodity. Moreover, the rapid development of the Vietnamese coffee industry caused some concerns due to its insufficient performance and the fierce competition within the industry. It is significant to establish an efficient supply network; notwithstanding, supplier selection has always been a challenge for companies. Therefore, this paper employs a hybrid model to determine the supplier selection criteria, a vital factor for a manufacturer under practical operating conditions. Firstly, a combined model of Grey forecasting and the Grey Fourier series is applied to forecast future rainfall and temperature data for six consecutive years. Secondly, based on the criteria, strategies, and buyer requirements, the single-objective linear programming model helps identify the outperformed suppliers. The results found that prices and location change are determinants of supplier selection, and supplier shortage is an enormous barrier for the industry. In this study, these price forecasts allow supply chain management to make informed decisions about inventory levels, transportation routes, and resource allocation to ensure smooth operation and optimize coffee supply chain management. [ABSTRACT FROM AUTHOR]

This paper studies the history of contractual choice in coffee plantations of São Paulo, Brazil. It focuses on the consolidation of non‐captive labour markets in the early phases of the transition from slavery in the country, particularly in the 1840s–50s. Vis‐à‐vis the alternatives of fixed rents and fixed payments per time worked or piece rates, the paper examines the rationale for the adoption of sharecropping arrangements with European bonded labourers. New archival evidence suggests that sharecropping had no obvious productivity advantage over alternative labour–rental arrangements in this period, and that the adoption of sharecropping arrangements resulted from the positional advantage of its first proposers, who influenced later choices of contractual design. A credit‐labour tie‐up long outlived the original sharecropping arrangements, in turn allowing for the immigration of poor and credit‐constrained Europeans, paving the way to insert Brazil into the circuits of mass migration without promoting institutional reforms to attract non‐bonded immigrants. [ABSTRACT FROM AUTHOR]

Copyright of Rostrum of Asclepius / Vima tou Asklipiou is the property of Technological Educational Institute of Athens and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)