Search

Semi-parallel wire suspenders with spherical plain bearings have untwisting under axial force, and the collision in the untwist process bring adverse effects on the structure. To investigate the axial mechanical response of semi-parallel wire suspenders with spherical plain bearings, the equilibrium equations of suspender are deduced by assuming the distribution of steel wire after deformation, the forms of boundary conditions are distinguished according to the use of spherical plain bearing, and the linear equation expressed by equivalent stiffness coefficients is deduced. The Costello theory and finite element modeling are used to verify the proposed calculation method in this paper, and the influence of suspender parameters on the stiffness equivalent coefficient is analyzed. The results show that the proposed calculation method is suitable for multi-layer semi-parallel wire suspenders; the twist angle and the total number of layers of wires have the greatest effect on the stiffness equivalence factor; when the twisting angle is close to 0, the torsional stiffness of suspender is 0.010–0.21 of that of the steel rod with the same section; the axial tensile stiffness of the conventional suspender is basically the same as that of the steel rod with the same section, but the torsional stiffness is only 0.012–0.023 of the steel rod with the same section, and the tension-torsion coupling effect cannot be ignored. The research results provide a concise method to calculate the axial response of semi-parallel wire suspenders, which lays a foundation for the engineering treatment of the untwisting problem of semi-parallel wire suspender using spherical plain bearings. • The axial mechanical response of semi-parallel wire suspenders with spherical plain bearings is investigated. • The expression between axial resultant force, torque and overall strain of twisting structures is deduced and verified. • A concise method to calculate the axial response of semi-parallel wire suspenders is proposed. [ABSTRACT FROM AUTHOR]

Casing deformation occurs frequently in shale gas wells, resulting in the failure of some fracturing stages to complete normal operations, which seriously affects shale gas production. This paper firstly analyzes the casing deformation mechanism of shale gas wells and determines that the casing shear deformation caused by formation slip is the main factor of casing deformation. In order to solve the problem of casing shear deformation, a finite element numerical model including the formation, cement ring, and the casing is established. The casing shear deformation caused by formation slip is simulated, and the deformation results obtained are consistent with those measured in the actual wellbore. Based on the numerical model, a casing deformation governance method is proposed to optimize the wellbore trajectory and adjust the cement ring properties. It is calculated that reducing the dip angle á of the formation and casing vertical direction and reducing the formation slip is beneficial to reducing casing deformation. The use of low elastic modulus cement and uncementing operations can provide a buffer space for formation slip, effectively reduce casing deformation, and provide an effective treatment method for shear deformation of shale gas wells. [ABSTRACT FROM AUTHOR]

In application scenarios such as astronautics, high-altitude aircraft, medical radiography, high-energy physics, and nuclear power plants, the irradiation resistance of electronic components is one of the basic requirements for their reliability. HfO 2 -based ferroelectric films have the advantages of high CMOS process compatibility, good miniaturizability, low operating voltage, and excellent irradiation resistance, which are the core materials for the new generation of irradiation resistance ferroelectric memories. In this paper, two kinds of metal-electrode ferroelectric capacitors, W/Hf 0.5 Zr 0.5 O 2 /W (WW) and Pt/Hf 0.5 Zr 0.5 O 2 /Pt (PP), have been prepared, and three gradient γ-irradiation experiments have been carried out on the two kinds of ferroelectric capacitors. The effect of metal electrodes on the irradiation resistance of Hf 0.5 Zr 0.5 O 2 ferroelectric thin films was carefully investigated by comparing and analyzing the statistical laws of polarization change and rectangularity change before and after irradiation of a large number of devices. The experimental results show that the WW devices have better irradiation resistance than PP devices, and we further explain the irradiation resistance mechanism by first-principle calculations and finite element analysis to verify the credibility of the experimental results. Finally, we conducted a comparative test of the fatigue and wake-up characteristics of the WW devices before and after irradiation, and the results show that the prepared W/Hf 0.5 Zr 0.5 O 2 /W devices can withstand very high total γ-dose radiation, reaching up to 13.86 Mrad(Si), and they are very suitable for the application of irradiation resistant electronics. [Display omitted] • The Hf 0.5 Zr 0.5 O 2 (HZO) thin films with outstanding ferroelectric properties were prepared. • The HZO ferroelectric thin films exhibited extremely high radiation tolerance (reaching up to 13.86 Mrad(Si)). • The effect of different metal electrodes on the irradiation resistance of HZO ferroelectric thin films was analyzed. [ABSTRACT FROM AUTHOR]