Search

Fluorination strategy is demonstrated to be a successful approach for optimizing the electron distribution and morphology of organic photovoltaic materials. The previous works focus on introducing only a few C(sp2)─F bonds into conjugated backbone or C(sp3)─F bonds into sidechains. Herein, a new strategy by introducing C(sp3)─F polyfluoride unit into the backbone is proposed, wherein the fluorine atoms are not involved into the conjugation but can promote the intermolecular interaction between backbones. Two wide‐bandgap fluoropolymers are prepared and employed as the third component for ternary organic solar cells. As expected, even if there are six fluorine atoms in a single repeat unit, the relevant fluoropolymers possess complementary absorption and aligned energy levels. More importantly, the polyfluoride backbone affords adequate non‐covalent interactions, consequently enhancing the polymer aggregation and packing order, which is verified by a fibril‐like morphology in the blend film with the host polymer PM6 and only 10 wt.% fluoropolymer. In addition, the decreased surface energy caused by polyfluoride unit is beneficial for the improvement of domain purity and the formation of nanoscale phase separation between donor and acceptor materials. As a result, the fluoropolymer‐assisted ternary device displays a higher efficiency of 18.74% compared with the binary device (17.39%). [ABSTRACT FROM AUTHOR]

The development of high‐efficiency organic solar cells (OSCs) processed from non‐halogenated solvents is crucially important for their scale‐up industry production. However, owing to the difficulty of regulating molecular aggregation, there is a huge efficiency gap between non‐halogenated and halogenated solvent processed OSCs. Herein, we fabricate o‐xylene processed OSCs with approaching 20 % efficiency by incorporating a trimeric guest acceptor named Tri‐V into the PM6:L8‐BO‐X host blend. The incorporation of Tri‐V effectively restricts the excessive aggregation of L8‐BO‐X, regulates the molecular packing and optimizes the phase‐separation morphology, which leads to mitigated trap density states, reduced energy loss and suppressed charge recombination. Consequently, the PM6:L8‐BO‐X:Tri‐V‐based device achieves an efficiency of 19.82 %, representing the highest efficiency for non‐halogenated solvent‐processed OSCs reported to date. Noticeably, with the addition of Tri‐V, the ternary device shows an improved photostability than binary PM6:L8‐BO‐X‐based device, and maintains 80 % of the initial efficiency after continuous illumination for 1380 h. This work provides a feasible approach for fabricating high‐efficiency, stable, eco‐friendly OSCs, and sheds new light on the large‐scale industrial production of OSCs. [ABSTRACT FROM AUTHOR]

The side‐chain has a significant influence on the optical properties and aggregation behaviors of the organic small molecule acceptors, which becomes an important strategy to optimize the photovoltaic performance of organic solar cells. In this work, we designed and synthesized three brand‐new nonfused ring electron acceptors (NFREAs) OC4‐4Cl‐Ph, OC4‐4Cl‐Th, and OC4‐4Cl‐C8 with hexylbenzene, hexylthiophene, and octyl side chains on the π‐bridge units. Compared with OC4‐4Cl‐Ph and OC4‐4Cl‐Th, OC4‐4Cl‐C8 with linear alkyl side chain has more red‐shift absorption, which is conducive to obtaining higher short‐circuit current density. Additionally, the OC4‐4Cl‐C8 film exhibits a longer exciton diffusion distance, and the D18:OC4‐4Cl‐C8 blend film displays faster hole transfer, weaker bimolecular recombination, and more efficient exciton transport. Furthermore, The D18:OC4‐4Cl‐C8 blend films may effectively form interpenetrating networks that resemble nanofibrils, which can facilitate exciton dissociation and charge transport. Finally, OC4‐4Cl‐C8‐based devices can be created a marvellously power conversion efficiency (PCE) of 16.56%, which is much higher than OC4‐4Cl‐Ph (12.29%)‐ and OC4‐4Cl‐Th‐based (11.00%) ones, being the highest PCE among the NFREA based binary devices. All in all, we have validated that side‐chain engineering is an efficient way to achieve high‐performance NFREAs. [ABSTRACT FROM AUTHOR]

Designing and synthesizing narrow band gap acceptors that exhibit high photoluminescence quantum yield (PLQY) and strong crystallinity is a highly effective, yet challenging, approach to reducing non‐radiative energy losses (▵Enr) and boosting the performance of organic solar cells (OSCs). We have successfully designed and synthesized an A–D–A type fused‐ring electron acceptor, named DM‐F, which features a planar molecular backbone adorned with bulky three‐dimensional camphane side groups at its central core. These bulky substituents effectively hinder the formation of H‐aggregates of the acceptors, promoting the formation of more J‐aggregates and notably elevating the PLQY of the acceptor in the film. As anticipated, DM‐F showcases pronounced near‐infrared absorption coupled with impressive crystallinity. Organic solar cells (OSCs) leveraging DM‐F exhibit a high EQEEL value and remarkably low ▵Enr of 0.14 eV‐currently the most minimal reported value for OSCs. Moreover, the power conversion efficiency (PCE) of binary and ternary OSCs utilizing DM‐F has reached 16.16 % and 20.09 %, respectively, marking a new apex in reported efficiency within the OSCs field. In conclusion, our study reveals that designing narrow band gap acceptors with high PLQY is an effective way to reduce ▵Enr and improve the PCE of OSCs. [ABSTRACT FROM AUTHOR]