Search

This paper focuses on studying and simulating a GaAs1-xPx/Si1-yGey/Ge triple-junction solar cell structure. First, the strain and the bandgap energy associated to the SiGe layer have been studied. The optimal germanium concentration is 0.88 with a strain around 0.45%. Then, the phosphor concentration effect on the strain and the bandgap energy of the upper layer GaAs1-xPx/Si0.12Ge0.88 has been optimized. At room temperature, the optimal output parameter reach Jsc=34.41mA/cm², Voc=1.27V, FF=88.42% and =38.45% for an absorber thickness of 4.5µm and x=0.47, with a strain that doesn't exceed 1.5%. This study has enabled us to design a high-efficiency, low cost 3J solar cell. [ABSTRACT FROM AUTHOR]

In this paper, the CuInGaSe 2 based solar cell optimization has been established. We have simulated the structural strain effect. The effect of gallium concentration on the optical properties and the quantum external efficiency EQE was investigated. We also optimized the concentration x at low defect densities. The optimal gallium concentration is 0.30. We obtained an efficiency of the CuIn 0.70 Ga 0.30 Se 2 absorber solar cell around 24% with a strain ɛ = 0.64% and material defects densities equal to 1.2x1015cm−3. This work has been validated by theoretical and experimental studies. This study allows us to find a compromise between concentration x and defect concentrations in order to improve the performance and high efficiency of the solar cell. • The effect of structural deformation has been studied and simulated. • The effect of gallium on the optical properties and EQE was investigated. • We optimized the x concentration at low defect concentrations. • An efficiency of the solar cell which is equal to 24% with ɛ = 0.6% was obtained. • This work is validated by a theoretical and experimental study. [ABSTRACT FROM AUTHOR]

This study aims to investigate the different optical properties of the ZnSnN 2 absorber layer such as absorption, reflection and transmission coefficients. The effects of the ZnSnN 2 absorber layer thickness, temperature,and defect density on electrical parameters such as short circuit current density, open circuit voltage, fill factor and efficiency have also been studied in detail. These factors play an important role in the performance of the ZnO/CdS/ZnSnN 2 /Si/Mo structure. The highest efficiency of about 23.32 % is achieved without defects in the ZnSnN 2 absorber layer, under the 1-sun AM1.5 solar spectrum, by applying the flat band condition and considering the strain values of 0.37 % (ZnSnN 2 /Cds) and 7.17 % (ZnSnN 2 /Si). In addition to high efficiency, the ZnSnN 2 has a high absorption coefficient. This device will play a crucial role in optoelectronic applications. This structure is a promising candidate for low cost and high efficiency photovoltaic technology. [ABSTRACT FROM AUTHOR]