Search

Detailed knowledge of the subsurface elastic properties might provide much‐needed insight into the subduction‐zone structure and the estimation of reservoir parameters. Compressional and shear wave velocities can be inverted by elastic full‐waveform inversion using multicomponent ocean‐bottom seismometer data. However, this process is computationally intensive, requiring massive, repeated simulations scaling with the number of sources. Although source–receiver reciprocity can streamline elastic full‐waveform inversion, it cannot be applied by directly interchanging the positions of sources and ocean‐bottom seismometers. To reduce the computational cost, we develop a source–receiver reciprocal elastic full‐waveform inversion, in which the reciprocity in multicomponent data can be accomplished by transforming the data matching from the original geometry to a specific form under the reciprocal geometry. This approach significantly reduces computational costs from twice the number of sources, as seen in conventional elastic full‐waveform inversion, to a scale with the count of ocean‐bottom seismometers. The tests on synthetic data verify that the proposed reciprocal elastic full‐waveform inversion maintains accuracy while improving computational efficiency, and further application on the field data from East China Sea also showcases the efficiency of the proposed method, resulting in a speed‐up of 10 times. [ABSTRACT FROM AUTHOR]

We investigated the effects of the propagation path and site amplification of shallow tremors along the Nankai Trough. Using far‐field S‐wave propagation from intraslab earthquake data, the amplification factors at the DONET stations were 5–40 times against an inland outcrop rock site. Thick (∼5 km) sedimentary layers with VS of 0.6–2 km/s beneath DONET stations have been confirmed by seismological studies. To investigate the effects of thick sedimentary layers, we synthesized seismograms of shallow tremors and intraslab earthquakes at seafloor stations. The ratios of the maximum amplitudes from the synthetic intraslab seismograms between models with and without thick sedimentary layers were 1–2. This means that thin lower‐velocity (<0.6 km/s) sediments just below the stations primarily control the estimated large amplifications. Conversely, at near‐source (≤20 km) distances, 1‐order amplifications of seismic energies for a shallow tremor source can occur due to thick sedimentary layers. Multiple S‐wave reflections between the seafloor and plate interface are contaminated in tremor envelopes; consequently, seismic energy and duration are overestimated. If a shallow tremor occurs within underthrust sediments, the overestimation becomes stronger because of the invalid rigidity assumptions around the source region. After 1‐order corrections of seismic energies of shallow tremors along the Nankai Trough, the scaled energies of seismic slow earthquakes were 10−10–10−9 irrespective of the region and source depth. Hence, the physical mechanisms governing seismic slow earthquakes can be the same, irrespective of the region and source depth. Plain Language Summary: The deployment of campaigns and permanent ocean bottom seismometers (OBSs) has enabled us to investigate the activity and physical properties of offshore seismic phenomena. Our knowledge of offshore subsurface structures is still limited; consequently, many studies have used conventional analysis methods with the simplest assumptions. Using observed and synthetic seismograms near the Nankai Trough, we found a limitation in the conventional analysis method applied to OBS data. Thick sedimentary layers, which have been confirmed by seismological studies along the Nankai Trough just below the OBSs, cause an approximately 1‐order overestimation of source parameters for seismic phenomena occurring around the shallow plate boundary. This overestimation may have occurred during the seismic energy estimation of shallow slow earthquakes in Hikurangi, Costa Rica, and Mexico. After correcting for the effects of thick sedimentary layers, we found that the scaled energies of seismic slow earthquakes were 10−10–10−9 irrespective of the region and source depth. This suggests that the physical mechanisms governing seismic slow earthquakes can be the same, regardless of region and source depth. Key Points: Effects of path and site on the seismic energy estimation of slow earthquakes at shallow plate boundaries were investigatedThe assumption of far‐field body waves without thick sediments causes an overestimation of seismic energies for shallow tremorsScaled energies of seismic slow earthquakes at both shallow and large depths range from 10−10 to 10−9 [ABSTRACT FROM AUTHOR]

Ocean bottom seismometers (OBSs) have been used to detect submarine structural and tectonic information for decades. According to signal source controllability, OBS data have generally been classified into active and passive source data categories. The former mainly focuses on the compressional wave (P‐wave) velocity inversion and always lacks valid information about the shear wave (S‐wave) velocity structure. While the latter provides structural information with limited resolution due to the aperture of the stations. Overcoming the barriers between processing these two data types will allow the reuse of a vast amount of data from active source experiments to explore the submarine S‐wave velocity structural properties. Here, we creatively applied ambient noise interferometry to invert the S‐wave velocity structure using data from active source OBS deployment conducted in the southernmost Mariana subduction zone, which had already been utilized to detect submarine P‐wave velocity structure. Considering the short time duration and relatively low quality of this type of data, a combined method of short‐segment cross‐correlation and selected time‐frequency domain phase‐weighted stacking was adopted to obtain stable cross‐correlation functions, which were subsequently used to invert S‐wave velocity structures. Compared to previous studies using different methods, our result sheds new light on the crust and upper mantle structure of the southernmost Mariana subduction zone. This method could be used to detect more information based on the reutilization of existing active source OBS data. Plain Language Summary: Active source ocean bottom seismometer (OBS) data are usually used to detect P‐wave velocity information of submarine areas using signals from air‐gun shootings. However, most of the waveform recording ambient noise has yet to be utilized. A large amount of valuable data needs to be fully exploited for the high cost of OBS experiments. In addition, we still lack shear wave velocity information in many critical marine areas due to the rarely picked shear wave phases. However, this information is of great importance for marine tectonic analysis, such as magmatism, dehydration or serpentinization. Using the recorded ambient noise in OBS data from active source experiments can afford the opportunity to obtain shear‐wave velocity structures. We adopted different processing methods to calculate high‐quality surface wave dispersion data, which were subsequently used to invert shear wave structures in the southernmost Mariana Trench. This method can also provide structural information with a different resolution that is lacking using passive source OBS data. Key Points: Ambient noise interferometry was applied to ocean bottom seismometer data from an active source deployment to invert the shear‐wave velocity structureA selected time‐frequency domain phase‐weighted stack was adopted to improve the quality of cross‐correlationsWater content and hydrated layer thickness of the subducting plate were estimated in the southernmost Mariana Trench [ABSTRACT FROM AUTHOR]

Teleseismic back‐projection imaging has emerged as a powerful tool for understanding the rupture propagation of large earthquakes. However, its application often suffers from artifacts related to the receiver array geometry. We developed a teleseismic back‐projection technique that can accommodate data from multiple arrays. Combined processing of P and pP waveforms may further improve the resolution. The method is suitable for defining arrays ad‐hoc to achieve a good azimuthal distribution for most earthquakes. We present a catalog of short‐period rupture histories (0.5–2.0 Hz) for all earthquakes from 2010 to 2022 with MW ≥ 7.5 and depth less than 200 km (56 events). The method provides automatic estimates of rupture length, directivity, speed, and aspect ratio, a proxy for rupture complexity. We obtained short‐period rupture length scaling relations that are in good agreement with previously published relations based on estimates of total slip. Rupture speeds were consistently in the sub‐Rayleigh regime for thrust and normal earthquakes, whereas a tenth of strike‐slip events propagated at supershear speeds. Many rupture histories exhibited complex behaviors, for example, rupture on conjugate faults, bilateral propagation, and dynamic triggering by a P wave. For megathrust earthquakes, ruptures encircling asperities were frequently observed, with downdip, updip, and balanced patterns. Although there is a preference for short‐period emissions to emanate from central and downdip parts of the megathrust, emissions updip of the main asperity are more frequent than suggested by earlier results. Plain Language Summary: Back‐projection is an earthquake imaging method based on seismic waveforms recorded remotely at a group of seismometers (seismic array). Here, we develop a new approach to combine backprojections from multiple arrays and seismic waveforms and use it to derive a catalog of large earthquake rupture histories from 2010 to 2022, providing a map view of the high‐frequency radiation emitted along the fault. The method automatically estimates the earthquake rupture length, speed, directivity, and aspect ratio. Based on these estimates, we obtained scaling relations between the earthquake magnitude and rupture length that agree with classical relationships. We identified strike‐slip earthquakes propagating at supershear, that is, faster than the shear wave speed, the usual limit for self‐sustaining rupture propagation. We observed complex rupture behaviors, for example, multiple faults activated, bilateral ruptures, and triggering of the main phase of a rupture by a primary (P) wave from the earliest part of the rupture. For subduction earthquakes, high‐frequency emissions were often observed, forming a ring around the fault interface patches (asperities) where the main slip occurs. There was a preference for high‐frequency radiation to emanate from central and deeper parts of the subducting plate interface, but shallower emissions were more frequent than expected from previous literature. Key Points: We provide a complete catalog of high‐frequency rupture histories for M ≥ 7.5 events 2010–2022We develop a semi‐automatic method for estimating rupture length, speed, directivity, and aspect ratioBoth encircling ruptures and emissions updip of slip asperities common in megathrust earthquakes [ABSTRACT FROM AUTHOR]

In this work, we present both 1-D and 3-D shear wave velocity (Vs) models of the oceanic crust and uppermost mantle below the Deep OCean Test ARray area, located ∼ 70 km north of the central section of the Gloria Fault, in the eastern North-Atlantic Ocean. The velocity models are inferred from the dispersion of surface waves recorded on ocean bottom seismometers. Dispersion measurements are obtained from the analysis of ambient seismic noise at short periods (< 14 s) and teleseismic surface waves at long periods (> 14 s) using the two-station method. The 1-D Vs model is inferred from the joint inversion of Rayleigh wave phase velocities and Love wave group and phase velocities. The 3-D tomographic model is obtained by inversion of 2-D Love wave group velocity maps as a function of depth, further constrained by the average of Love wave phase velocities obtained from ambient noise (4–9 s) and the average Rayleigh and Love wave phase velocities calculated from teleseismic data (14–44 s). The 1-D Vs model shows a sediment layer with a low velocity of 1.05 km s−1, similar to previous studies in the region. Below the sediments, we find an oceanic crust with velocities ranging from 3.3 to 4.5 km s−1. The model reaches an unusually high velocity of 4.9 km s−1 in a 20 km thick layer at depths between 16 and 36 km. We interpret this fast velocity layer as indicative of the presence of harzburgite, a residue of enhanced melting that might have been formed by the proximity between the Mid-Atlantic Ridge and the Azores mantle plume. At greater depths the velocity decreases, forming a low-velocity zone that reaches a minimum at ∼ 70 km depth, which we interpret as the maximum depth for the lithosphere–asthenosphere boundary. The 3-D model shows a structure that is mostly horizontally layered, with Vs isocontours at 3.5–4.5 km s−1 highlighting oscillations of the crustal structure with wavelengths of ∼25–30 km. These oscillations may be due to changes in the rate of mantle upwelling and magma supply rate. [ABSTRACT FROM AUTHOR]