Search

While previous studies have suggested that biochar, nitrification inhibitors, and urease inhibitors may reduce soil greenhouse gas emissions, their effectiveness in soils irrigated with alternative water resources remains unclear. To compensate for this, reclaimed water and livestock wastewater were utilized as alternative water resources alongside groundwater control. Nitrapyrin and N-(n-butyl) thiophosphoric triamide and biochar were applied to the soil either individually or in combination, and a no-substance treatment (NS) was included for comparison. The results revealed that reclaimed water and livestock wastewater irrigation exacerbated the global warming potential. Compared to the NS, all exogenous substance treatments suppressed nitrous oxide (N2O) emissions while increasing carbon dioxide (CO2) emissions, and affecting methane (CH4) emissions varied across treatments irrespective of the water types. Interestingly, the additional biochar reduced the inhibitory effect of the inhibitors on the greenhouse effect. Using nitrification inhibitors reduced the global warming potential by 48.3% and 50.1% under reclaimed water and livestock wastewater irrigation, respectively. However, when nitrification inhibitors were applied in combination with biochar, the global warming potential was increased by 52.1–83.4% compared to nitrification inhibitors alone, and a similar trend was also observed in the scenario of urease inhibitors, with increases ranging from 8.8 to 35.1%. Therefore, the combined application of biochar and inhibitors should be approached cautiously, considering the potential for increased greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

Phosphogypsum-based materials have gained much attention in the field of road infrastructure from the economic and sustainable perspectives. The Three-point bending test, the Four-point bending test and the Semi-circular bending test are three typical test methods applied for fracture energy measurement. However, the optimal test method for fracture energy evaluation has not been determined for phosphogypsum-based materials. To contribute to the gap, this study aims to analyze and compare the three test methods for fracture energy evaluation of phosphogypsum materials based on the peridynamic theory. For this purpose, the load–displacement, vertical displacement–Crack Mouth Opening Displacement (CMOD) and fracture energy of the phosphogypsum-based materials were measured and calculated from the three test methods. The simulated load–displacement and vertical displacement–CMOD by PD numerical models, with different fracture energy as inputs, were compared to the corresponding tested values according to simulation error results. The results showed that the Four-point bending test led to minimized errors lower than 0.189 and indicators lower than 0.124, demonstrating the most optimal test method for the fracture energy measurement of phosphogypsum-based material. The results of this study can provide new methodological references for the selection of material fracture energy measurement tests. [ABSTRACT FROM AUTHOR]