Search

The unusual combination of the fundamentally contradictory properties of high tensile strength and high fracture toughness found in maraging steel makes it well suited for safety-critical applications that require high strength-to-weight materials. In certain instances, additive manufacturing (AM) has produced materials that may be desirable for safety-critical applications where impact toughness is a key property, such as structural parts for the aerospace industry or armor plates for military applications. Understanding the influence of process parameters and defect structure on the properties of maraging steel parts produced via laser powder bed fusion (LPBF) is a fundamental step towards the broader use of AM technologies for more demanding applications. In this research, the impact energy of V-notched specimens made of 1.2709 maraging steel produced by LPBF was determined via Charpy impact testing. Specimens were produced using different processing parameter sets. By combining the process parameters with the porosity values of the parts, we demonstrate that an almost full prediction of the impact properties can be achieved, paving the way for significantly reducing the expenses of destructive testing. [ABSTRACT FROM AUTHOR]

Payloads for light unmanned free balloons must meet several safety requirements such as being able to protect the inner electronics in order to extract scientific data and to reduce the chance of inflicting personal injury in case of an accidental fall. This article proposes a novel payload structure, which exhibits the form of a dodecahedron. The actual form was determined by carrying out theoretical drop tests on different polyhedrons using the finite element method (FEM). From the simulations, it could be deduced that the dodecahedron was the optimal choice, since the duration of the impact was longer, while the impact force was slightly lower. The payload was produced by additive technologies; therefore, after performing tensile tests on probable materials, PLA was selected as the optimal candidate. The theoretical results about the dodecahedron's ability were validated by laboratory and real-life drop tests, where the new payload was subjected to 56% less impact force under a 78% longer collision time compared to a classic, rectangular cuboid design. Based on these tests, it was demonstrated that the new structure is safer and it is applicable. [ABSTRACT FROM AUTHOR]

Torsional stiffness of athletic footwear plays a crucial role in preventing injury and improving sports performance. Yet, there is a lack of research focused on the biomechanical effect of torsional stiffness in badminton shoes. This study aimed to comprehensively investigate the influence of three different levels of torsional stiffness in badminton shoes on biomechanical characteristics, sports performance, and injury risk in badminton players. Fifteen male players, aged 22.8 ± 1.96 years, participated in the study, performing badminton-specific tasks, including forehand clear stroke [left foot (FCL) and right foot (FCR)], 45-degree sidestep cutting (45C), and consecutive vertical jumps (CVJ). The tasks were conducted wearing badminton shoes of torsional stiffness measured with Shore D hardness 50, 60, and 70 (referred to as 50D, 60D, and 70D, respectively). The primary biomechanical parameters included ankle, knee, and MTP joint kinematics, ankle and knee joint moments, peak ground reaction forces, joint range of motion (ROM), and stance time. A one-way repeated measures ANOVA was employed for normally distributed data and Friedman tests for non-normally distributed data. The 70D shoe exhibited the highest ankle dorsiflexion and lowest ankle inversion peak angles during 45C task. The 60D shoe showed significantly lower knee abduction angle and coronal motions compared to the 50D and 70D shoes. Increased torsional stiffness reduced stance time in the FCR task. No significant differences were observed in anterior-posterior and medial-lateral ground reaction forces (GRF). However, the 70D shoe demonstrated higher vertical GRF than the 50D shoe while performing the FCR task, particularly during 70% - 75% of stance. Findings from this study revealed the significant role of torsional stiffness in reducing injury risk and optimizing performance during badminton tasks, indicating that shoes with an intermediate level of stiffness (60D) could provide a beneficial balance between flexibility and stability. These findings may provide practical references in guiding future badminton shoe research and development. Further research is necessary to explore the long-term effects of altering stiffness, considering factors such as athletic levels and foot morphology, to understand of the influence of torsional stiffness on motion biomechanics and injury prevalence in badminton-specific tasks. [ABSTRACT FROM AUTHOR]

This study presents a comprehensive review of the correlation between tibial acceleration (TA), ground reaction forces (GRF), and tibial bone loading, emphasizing the critical role of wearable sensor technology in accurately measuring these biomechanical forces in the context of running. This systematic review and meta-analysis searched various electronic databases (PubMed, SPORTDiscus, Scopus, IEEE Xplore, and ScienceDirect) to identify relevant studies. It critically evaluates existing research on GRF and tibial acceleration (TA) as indicators of running-related injuries, revealing mixed findings. Intriguingly, recent empirical data indicate only a marginal link between GRF, TA, and tibial bone stress, thus challenging the conventional understanding in this field. The study also highlights the limitations of current biomechanical models and methodologies, proposing a paradigm shift towards more holistic and integrated approaches. The study underscores wearable sensors' potential, enhanced by machine learning, in transforming the monitoring, prevention, and rehabilitation of running-related injuries., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Xiang, Gao, Wang, Shim, Fekete, Gu and Fernandez.)